munotes®

Engineering FE Engineering Common Sem 2 Engineering Graphics May 2023 R16 Question Paper - Mumbai University | munotes

Engineering Graphics Question Paper, May 2023.pdf
HAS · 440 KB · 1 May 2025

Loading PDF...

Questions asked in this paper

  1. Q2 Use first angle method of projection, unless mentioned otherwise 3.Write all answers on drawing sheets only and use both the sides of the sheet
  2. Q4 Use your own judgment for any unspecified dimension
  3. Q6 All dimensions are in mm Draw the curve traced by a point on the circumference of adisc of 50mm 06 diameter, which rolls along the ground for one complete revolution. Take initial position of generating point as a contact point of disc with ground Also draw normal and tangent to the curve at any suitable point on the
    • (b) For the object shown in figure,draw the following views:
    • (i) Front view in direction of arrow. 05
  4. Q2 For the object shown in figure, draw the following views: 5 marks
    • (iv) Show all dimensions 02
  5. Q3 A pentagonal pyramid, base edges 25 mm and axis one of its triangular faces in the V.P. and edge of the base contained by that face makes an angle of with H.P. Draw its projections 15 marks
  6. Q4 (a) Acylinder of diameter 45 and axis 60 mm long is resting on a point of its base on H.P. with axis inclined at to H.P. Draw the projections of 6 marks
    • (b) shows two views of an object. Draw isometric view of the object. 09
  7. Q5 A regular pentagonal pyramid with the sides of its base 30 mm and height 80 mm rests on an edge of base. The base is tilted until its apex is mm above the level of the edge of the base on which it rests. Draw the projection of the pyramid when the edge, on which it rests, is parallel to the V.P. and the apex of the pyramid points towards V.P
  8. Q6 (a) A line AB 65 mm long, has its end A 20 mm above the H.P. and in front of V.P. The end B is 40 mm above the H.P. and 65 mm in front of the V.P. Draw the projections of AB and show its inclinations with the
    • H.P. and V.P
    • (b) | Figure shows two views of an object. Draw isometric view of the object. 08

Read from the scan above, so a character or two may differ. The scan is the original.

Issue

Something wrong on this page? Report it and we will check it against the scan.

Quick Help

No. The full paper opens straight away, with no login and nothing to pay.

Something wrong with this paper? Report it.

Connected Papers
Engineering / HAS · 231 papers
Browse all →
May 2026 May 2026 May 2026 May 2026 May 2026 May 2026 May 2026 - R19 May 2026 - R19 May 2026 - R19 May 2026 - R19 Dec 2025 Dec 2025 Dec 2025 Dec 2025 Dec 2025 Dec 2025 Dec 2025 - R19 Dec 2025 - R19 Dec 2025 - R19 Dec 2025 - R19 Dec 2025 - R19 May 2025 May 2025 May 2025 May 2025 May 2025 May 2025 May 2025 - R19 May 2025 - R19 May 2025 - R19 May 2025 - R19 May 2025 - R19 Dec 2024 Dec 2024 Dec 2024 Dec 2024 Dec 2024 Dec 2024 Dec 2024 - R19 Dec 2024 - R19 Dec 2024 - R19 Dec 2024 - R19 Dec 2024 - R19 May 2024 May 2024 May 2024 May 2024 May 2024 Dec 2023 Dec 2023 Dec 2023 Dec 2023 Dec 2023 May 2023 May 2023 May 2023 May 2023 May 2023 - R16 May 2023 - R19 Dec 2022 - Copy 2 Dec 2022 - R16 Dec 2022 - R16 Dec 2022 - R16 Dec 2022 - R16 Dec 2022 - R16 Dec 2022 - R19 Dec 2022 - R19 Dec 2022 - R19 Dec 2022 - R19 2022 - Summer 2022 - Summer 2022 - Summer R16 2022 - Summer R16 2022 - Summer R16 2022 - Summer R16 2022 - Summer R16 2022 - Summer R16 Set 2 2022 - Summer R19 2022 - Summer R19 2022 - Summer R19 2022 - Summer R19 2022 - Summer R19 Dec 2019 - CBSGS Dec 2019 - CBSGS Dec 2019 - CBSGS Dec 2019 - CBSGS Dec 2019 - CBSGS Dec 2019 - CBSGS Dec 2019 - R16 Dec 2019 - R16 Dec 2019 - R16 Dec 2019 - R16 Dec 2019 - R16 Dec 2019 - R16 Dec 2019 - R19 Dec 2019 - R19 Dec 2019 - R19 Dec 2019 - R19 May 2019 - CBSGS May 2019 - CBSGS May 2019 - CBSGS May 2019 - CBSGS May 2019 - CBSGS May 2019 - CBSGS May 2019 - R16 May 2019 - R16 May 2019 - R16 May 2019 - R16 May 2019 - R16 May 2019 - R16 Dec 2018 - CBSGS Dec 2018 - CBSGS Dec 2018 - CBSGS Dec 2018 - CBSGS Dec 2018 - CBSGS Dec 2018 - CBSGS Dec 2018 - R16 Dec 2018 - R16 Dec 2018 - R16 Dec 2018 - R16 Dec 2018 - R16 Dec 2018 - R16
Questions? Email contact@munotes.in
Done!
Done!