munotes®

Engineering BE Electrical Engineering Sem 7 May 2023 2023 ELEC BE7Electrical Power System III Question Paper - Mumbai University | munotes

May 2023 Question Paper.pdf
ELECTRICAL · 1 May 2025

Loading PDF...

Questions asked in this paper

  1. Q1 Attempt any four of the following 20 marks
    • a) Explain why frequency control loop and voltage control loop are not 05
    • b) For following fill in the blanks, all = 0 05 Define power system stability and classify it on the basis of nature of 05
    • d) State assumptions made in transient stability studies 05
    • e) In turbine speed governor system APc is unit step ,Af =0, R=2.5, 05 Ksg=1,Tsg=0.4, Determine AYE at
    • a) A simple two-bus power system is shown in fig 10 0.5+ 0.25 j (Load) V2 | =1.0 p.u (Bus 2 is PV bus). Obtain 52 and at the end of first iteration
    • b) For the network shown in figure obtain the complex bus bar voltage at at the end of the first iteration. Use the Gauss seidal method. Line impedances are given in pu Given Bus | is slack bus with V; =1<0 1.46 Assume =1.02<0
    • a) Determine the economic operation point for three thermal units delivering a 10 total load of 600 MW with considering generator limit
    • b) Derive formula for Bmn coefficients in transmission loss formula 10
    • a) Find the steady state power limit of a system consisting of a generator 10 equivalent reactance 0.5 p.u connected to an infinite bus through a series reactance of 1.0 p.u. The terminal voltage of the generator is held at 1.2 p.u and the voltage of the infinite bus is 1 p.u direct axis transient reactance xd’ = 0.3 p.u is connected to an infinite bus through a purely reactive circuit as shown in the figure below. Reactances are marked on the diagram on a common system base. The generator is delivering real power Pe=0.8 pu and Q=0.074 pu to the infinite bus at voltage v=1 pu. A temporary three phase fault occurs at the sending end of the line at point F When the fault is cleared, both the lines are intact. Determine the critical clearing angle and the critical clearing time
    • a) Draw turbine speed governor system and explain briefly 4 major parts in it 10
    • b) Explain dynamic response of change in frequency for step change in load of — 10 an isolated power system. How dynamic response changes with integral
  2. Q6 Write short notes on 20 marks
    • a) power pool and its advantages and disadvantages 10
    • b) System state classification of power system security 10

Read from the scan above, so a character or two may differ. The scan is the original.

Report an error

Something wrong on this page? Report it and we will check it against the scan.

Quick Help

No. The full paper opens straight away, with no login and nothing to pay.

Something wrong with this paper? Report it.

Connected Papers
Engineering / ELECTRICAL · 244 papers
Browse all →
2023 - ELEC3 Engineering Mathematic III 2023 - ELEC3Analog Electronics 2023 - ELEC3 Fundamantals Of Electrical Machines And Measurements 2023 - ELECDSE3 Fundamantals Of Electricalmachines And Measurements 2023 - DSE ELEC3Analog Electronics 2023 - ELECDSE3Electrical Power System I 2023 - ELEC3 Electrical Circuit Analysis 2023 - ELEC3Electrical Power System I 2023 - ELEC DSE3Engineering Mathematics III 2023 - DSE ELEC3 Electrical Circuit Analysis 2022 - ELEX Electronic Instruments And Measurements 2022 - Analog Electronics 2022 - Electrical Circuit Analysis 2022 - Engineering Mathematics III 2022 - Fundamantals Of Electrical Machines And Measurements 2022 - Electrical Power System I 2022 - ELEC Electrical Circuit AnalysisDSE 2022 - Analog ElectronicsDSE 2022 - ELEC Engineering Mathematics IIIDSC 2022 - Electrical Power System IDSE 2022 - Fundamantals Of Electrical Machines Measurements 2019 - Applied Mathematics III 2019 - Applied MathematicsIII ELECCBSGS 2019 - Conventional And Non Conventional Power Generation 2019 - Conventional And Non Convetional Power Generation 2019 - Electrial And Electronics Measurement 2019 - Electrical And Electronic Measurements 2019 - Electronics Device And Circuit 2019 - Eletronic Devices And Circuits 2018 - Aplied Mathematics III 2CBSGS 2018 - Applied Mathematics III 2018 - Conventional And Non Conventional Power Generation 2018 - Conventional And Non Conventional Power Generation 2018 - Electrial And Electronics Measurement 2018 - Electrial Machine I 2018 - Electrical And Electronic Measurements 2018 - Electronics Device And Circuit 1Choice Based 2018 - Eletronic Devices And Circuits
2023 - ELEC4Control System Design 2023 - ELEC 4Engineering Mathematics IV 2023 - ELEC4 Electrial AC Machines I 2023 - ELEC4Power Electronic Devices And Circuits 2023 - ELEC4 Electric And Hybrid Electric Vehicle 2023 - ELEC4 Digital Electronics 2022 - ELEC Electric And Hybrid Electric Vehicle 2022 - AC Machine 1 2022 - Digital Electronics 2022 - ELECPower Electronics Devices And Circuits 2022 - Engineering Mathematics IV 2022 - Electrical AC Machines I 2022 - Power Electronic Devices And Circuits 2022 - Digital Electronics 2022 - Electric And Hybrid Electric Vehicle 2022 - SE ELECEngineering Mathematics IV 2019 - Analog And Digital Integraed Circuits 2019 - Analog And Digital Integrated Circuits 2019 - Analog And Digital Integrated Circutis 2019 - Analog Anddigital Integrated Circuits 2019 - Applied Mathematics VI eleccbsgs 2019 - Applied Mathematics VI 2019 - Applied Mathematics 2019 - Electrical Machines I 2019 - Electrical Machines II 2019 - Electrical Machines 2019 - Electrical Networks 2019 - Electrical Networks 2019 - Electromagnetic Field And Wave Theory 2019 - Electromagnetic Field And Wave Theory 2019 - Elements Of Power System 2019 - Elements Of Power System 2019 - Elextrical Machines II 2019 - Numerical Methods And Optimization Echniques NS 2019 - Numerical Methods And Optimization Techniques 2019 - Power System I 2019 - Power System I 2019 - Signal Processing 2018 - Analog And Digital Integrated Circuits 2018 - Analog And Digital Integrated Circuits 2018 - Applied Mathematics 2CBSGS 2018 - Applied Mathematics 2018 - Electrical Machines I 2018 - Electrical Machines II 2018 - Electrical Networks 2018 - Electromagnetic Field And Wave Theory 2018 - Elements Of Power System 2018 - Numerical Methods And Optimization Techniques 2018 - Power System 2018 - Signal Processing
2023 - ELEC5Power Ystem Protection And Swichgear 2023 - ELEC5Renewable Energy Sources 2023 - ELEC5 Electromagnetic Field And Wave 2023 - ELEC5 Control System 2023 - ELEC5 Electrial AC Machine II 2023 - ELEC5 Electric Power Systems II 2023 - ELEC5INDUSTRIAL ROBOTICS 2022 - Renewable Energy Sources 2022 - Control System 2022 - Electric Power Systems II 2022 - Electrical AC Machines II 2022 - Electromagnetic Field And Wave 2019 - Communication Engineering 2019 - Communication Engineering 2019 - Control System I 2019 - Control System I 2019 - Electrical Machine II 2019 - Electrical Machine II 2019 - Electrical Machines III 2019 - Electrical Machines III 2019 - Electromagnetic Fields And Waves 2019 - Electromagnetic Fields And Waves 2019 - Microprocessor And Peripherals Interfacing 2019 - Power Electronics 2019 - Power Electronics 2019 - Power Electronics 2019 - Power Electronics 2019 - Power System II 2019 - Power System II 2019 - Protection And Switch Gear Engineering 2019 - Protection And Switch Gearengineering 2019 - Renewable Energy And Energy Storage 2019 - Renewable Energy And Energy Storage 2019 - Utilization Of Electrical Energy 2019 - Utilization Of Electrical Energy Elective IChoice Base 2018 - Communication Engineering 2018 - Control System I 2018 - Electrical Machine II 2018 - Electromagnetic Fields And Waves 2018 - Energy And Energy StorageDLOCChoice BasedElective I 2018 - Power Electronics 2018 - Power Electronics 2018 - Power System II 2018 - Protection And Switchgear Engineering 2018 - Utilization Of Electrical EnergyDLOCChoice BasedElective I
2023 - ELEC6Microcontroller Applications 1 2023 - ELEC6Signals And Systems 1 2023 - ELEC6 Electric TractionDLOC 1 2023 - ELEC6 Energy StorageDLOC 1 2023 - ELEC MECHATRONICSIOT HONOUR 1 2022 - TE ELEC Power System Protection And Switchgear 2022 - TE ELEC Protection Of Switchgear Engineering 2022 - Microcontroller Applications 2022 - ELEC CSDControl System Design 2022 - ELEC Signals Ans Systems 2022 - ELEC Electric Traction 2022 - ELECHigh Voltage Engineering 2022 - Signals And Systems 2022 - Power System Protection And Switchgear 2022 - Electric Traction 2022 - Control System Design 2022 - Industrial Robotics 2019 - Control System I 2019 - Control System II 2019 - Control System II 2019 - DLOC II Advanced Power Electronics 2019 - DLOC II Digital Communication Engineering 2019 - DLOC II Micro Grid 2019 - Digital Communication Engineering 2019 - Electrial Machines IV 2019 - Electrical Machines III 2019 - Electrical Machines IV 2019 - Micro Grid 2019 - Microcontroller And Its Application 2019 - Microcontroller And Its Applications 2019 - Microcontroller And Its Applications 2019 - Power System Analysis 2019 - Power System Analysis 2019 - Project Management 2019 - Project Management 2019 - Protectiion And Switchgear Engineering 2019 - Protectiion And Switchgear Engineering 2019 - Signal Processing 2019 - Singal Processing 2019 - Utilization Of Electrical Energy 2019 - Utilization Of Electrical Energy 2018 - Electrical Machines III 2018 - Microcontroller And Its Application 2018 - Power System Analysis 2018 - Project Managemant 2018 - Utilization Of Electrical Energy
Questions? Email contact@munotes.in
Done!
Done!