B.E. (Artificial Intelligence and Data Science) Engineering Workshop II Syllabus - Mumbai University
This is the FY BE AI and DS syllabus under NEP 2020, in force from the academic year 2024-25. The third and fourth years of this degree are still taught on the earlier CBCS REV-2019 'C' Scheme, because the University has published no NEP syllabus for Semesters V to VIII of any engineering branch.
Loading syllabus...
Syllabus for Engineering Workshop-II
10 hours
- Note: Trade 1 and 2 are compulsory. Select any ONE trade topics out of the topic trade 3 to 5. Demonstrations and hands on experience to be provided during the periods allotted for the same. Report on the demonstration including suitable sketches is also to be included in the term work CO-1 is related to Trade-1 CO-2 to CO-4 is related to Trade-2 CO-5 is related to Trade-3 CO-6 is related to Trade-4 CO-7 is related to Trade-5 CO evaluation is to be done according to the opted Trades in addition to Compulsory Trades.
- Trade-1 Carpentry(Compulsory) 1. Use and setting of hand tools like hacksaws, jack planes, chisels and gauges for construction of various joints, wood tuning and modern wood turning methods. 2. Term work to include one carpentry job involving a joint and report on demonstration of a job involving wood turning
- Trade-2 Basic Electrical work shop:(Compulsory): 3. Single phase and three phase wiring. Familiarization. of protection switchgears and their ratings (fuse, MCB, ELCB). Wiring standards, Electrical safety in the work place safe work practices. Protective equipment, measures and tools. 4. Layout drawing, layout transfer to PCB, etching and drilling and soldering technique
- Trade-3 Masonry: 5. Use of masons tools like trowels, hammer, spirit level, square, plumb line and pins etc. demonstration of mortar making, single and one and half brick masonry , English and Flemish bonds, block masonry, pointing and plastering.
- Trade 4 Sheet metal working and Brazing: 6. Use of sheet metal, working hand tools, cutting , bending , spot welding
- Trade-5 Forging (Smithy): 7. At least one forging job to be demonstrated and a simple job to be made for Term Work in a group of 4 students.
Text Books
- 1 Workshop Technology, Volume-I, P.N.Rao, McGrrawHill Publication
- 2 Elements of Workshop Technology, Vol-I, S.K. Hajra Choudhury, A K Hajra Choudhury,Nirjar Roy, Media Promoters &Publishers Pvt Ltd
References
- 1 Workshop Technology, Part-II, W A J Chapman, VIVA Books Pvt Ltd
- 2 A Course in Workshop Technology, B.S. Raghuvanshi, Dhanpat Rai and Co Ltd.
Reproduced from the University of Mumbai syllabus for B.E. (Artificial Intelligence and Data Science), item 7.7 (R-A), under NEP 2020, in force from the academic year 2024-25. Wording, module numbering and hours are as printed in that syllabus.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.