munotes®
Sign in
Home / Syllabus / B.E. (Artificial Intelligence and Data Science) / FY BE AI and DS / Semester 2 / Engineering Graphics

B.E. (Artificial Intelligence and Data Science) Engineering Graphics Syllabus - Mumbai University

This is the FY BE AI and DS syllabus under NEP 2020, in force from the academic year 2024-25. The third and fourth years of this degree are still taught on the earlier CBCS REV-2019 'C' Scheme, because the University has published no NEP syllabus for Semesters V to VIII of any engineering branch.

Engineering Graphics.pdf
Semester 2 · FY BE AI and DS · NEP 2020

Loading syllabus...

Syllabus for Engineering Graphics

Semester 2 · FY BE AI and DS · NEP 2020

Module 0: Prerequisite 01 hours

  • 1.To draw basic geometric shapes like pentagon, hexagon and square (in different orientation). 2. Divide a line into equal number of parts. 3. Divide a circle into equal number of parts. Comment (Prerequisite syllabus should not be considered for paper setting)

Module I: Introduction to Engineering Drawing 03 hours

  • 1.1 Introduction to Engineering Graphics and its significance in Engineering domain. Types of Lines, Dimensioning Systems as per IS conventions. 1.2 Introduction to plain and diagonal scales. 1.3 Engineering Curves: Basic construction of Cycloid, Involutes and Helix (cylinder only).

Module II: Projections of Points, Lines and Planes 06 hours

  • 2.1 Projections of Points Projections of points in any quadrants as well as resting on planes. 2.2 Projections of Lines Projections of lines inclined to both the reference planes (Excluding Traces of lines). Simple application based problems on projection of lines. 2.3 Projections of Planes Projections of planes (Triangular, Square, Rectangular, Pentagonal, Hexagonal and Circular) inclined to both the Reference Planes. (Exclude composite planes).

Module III: Projections of Solids 06 hours

  • Projections of solids with the axis inclined to one and both reference planes. (prism, pyramid, cylinder and
  • cone only). Triangular to hexagonal prism and pyramids to be considered. Exclude Spheres, Composite, hollow solids and frustum of solids). Use change of position or Auxiliary plane method.

Module IV: Sections of Solids and Development of Surfaces 08 hours

  • 4.1 Sections of Solids Sections of Prism, Pyramid, Cylinder, & Cone cut by plane perpendicular to at least one reference plane (Exclude Curved Section Plane). Use change of position or Auxiliary plane method. 4.2 @Development of Surfaces Development of lateral surface (only) of prism and pyramid only.

Module V: Orthographic Projections 09 hours

  • 5.1 Orthographic Projections Fundamentals of orthographic projections like concept of quadrants, observer position, horizontal, vertical and profile plane, symbol etc. Different orthographic views, First and Third angle method of projection. Views of a simple machine part as per the first angle projection method recommended by I.S. 5.2 Sectional Orthographic Projections Fundamentals of sectional projections like concept of section plane, its representation, section lines and its features, need of sectional views, rib and web in section. Types of section and its representation. Different views of a simple machine part as per the first angle projection.

Module VI: Isometric Views 07 hours

  • Basic concept of isometric projection like why it is called isometric, what does it represents, its need, isometric and non-isometric lines, isometric axes and isometric scale. Difference between isometric projection and isometric views. Conversion of orthographic views to isometric views (Excluding sphere).
  • @ only in Term Work and to be considered for lab course (i.e.; Questions will not be asked in any examination).

Text Books

  • 1 N.D. Bhatt, "Engineering Drawing (Plane and solid geometry)", Charotar Publishing House Pvt. Ltd.
  • 2 N.D. Bhatt & V.M. Panchal, "Machine Drawing", Charotar Publishing House Pvt. Ltd.

References

  • 1 Narayana, K.L. & P Kannaiah (2008), Textbook on Engineering Drawing, Scitech Publisher.
  • 2 Prof. Sham Tickoo (Purdue University) & Gaurav Verma, "(CAD Soft Technologies).
  • 3 Auto CAD 2012 (For engineers and Designers)", Dreamtech Press New Delhi.
  • 4 Dhananjay A Jolhe, "Engineering Drawing" Tata McGraw Hill.

Online References

  • Sr. No. Website Name
  • 1 https://archive.nptel.ac.in/courses/112/105/112105294/
  • 2 https://nptel.ac.in/courses/112103019
  • 3 https://archive.nptel.ac.in/courses/112/102/112102304/

Reproduced from the University of Mumbai syllabus for B.E. (Artificial Intelligence and Data Science), item 7.7 (R-A), under NEP 2020, in force from the academic year 2024-25. Wording, module numbering and hours are as printed in that syllabus.

The complete syllabus

This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.

PDF B.E. Artificial Intelligence and Data Science - First Year, Semester I and II - NEP 2020 - Item 7.7 (R-A) NEP 2020, Semesters I and II, in force from 2024-25 Read full PDF Read
PDF B.E. Artificial Intelligence and Data Science - Second Year, Semester III and IV - NEP 2020 - Item 6.20 (N) NEP 2020, Semesters III and IV, in force from 2025-26 Read full PDF Read
PDF B.E. Artificial Intelligence and Data Science - Third Year, Semester V and VI - CBCS REV-2019 C Scheme - Item 6.42 (R) CBCS REV-2019 'C' Scheme, Semesters V and VI, in force from 2022-23 Read full PDF Read
PDF B.E. Artificial Intelligence and Data Science - Fourth Year, Semester VII and VIII - CBCS REV-2019 C Scheme - Item 6.12 (N) CBCS REV-2019 'C' Scheme, Semesters VII and VIII, in force from 2023-24 Read full PDF Read
Report or request
Done!