munotes®

Engineering Sem 2 Physics of Measurements and Sensors May 2026 Question Paper with Solutions

Mumbai University Solved Question Papers munotes.in

Physics of Measurements and Sensors

Engineering · Sem 2

May 2026 Examination

Previous Year Question Paper with Solution

munotes.in Mumbai

munotes.in

First published on munotes.in on 18 November 2026.

Published by munotes.in, Mumbai.

Model answers written and edited by the munotes.in editorial desk.

Passages from this volume may be quoted, in print, online or by an AI system, with credit: name munotes.in and link to this volume's page. The volume may not be reproduced as a whole. Full terms at munotes.in/content-license.

munotes.in is an independent study resource for students of the University of Mumbai. It is not affiliated with the University of Mumbai, and is not endorsed by it.

The University does not publish an official answer key for this paper. The answers in this volume are model answers, written to show how a full-mark answer is built. They are a study aid, not an authority on what an examiner marked.

The question paper reproduced here is the paper as set by the University of Mumbai at the May 2026 examination.

munotes.in ii
munotes.in iii
munotes.in iv
munotes.in v

The Paper as Set

The questions in this volume are the questions asked at the May 2026 examination, reproduced as the University of Mumbai set them, in the order it set them. Nothing has been reworded, added or left out. Only the answers are ours. See the original question paper.

Duration 1½ hours  ·  Total marks 45  ·  19 questions answered

How to use this volume

Solve the paper first, under exam conditions and against the clock. Then read the answers here and mark your own. Reading a solution before attempting the question feels productive and teaches very little, because recognising an answer is not the same as being able to write one.

munotes.in vi

Q.1

Attempt any five · 15 Marks

munotes.in 1

(a)Write 3 points as the difference between Precision and Accuracy for measurements.[3]

Answer

For full marks, cover: a one-line meaning of each term, three clear points of difference in a table, and an example that shows the two can differ.

Meaning

Accuracy is how close a measured value is to the true value of the quantity.

Precision is how close repeated measurements of the same quantity are to one another.

Differences

PointAccuracyPrecision
1. What it comparesThe measured value with the true valueRepeated readings with one another
2. What it showsFreedom from systematic error, such as a wrong zero or a wrong scaleFreedom from random error, that is, small scatter
3. How it is expressedBy the error or percentage error from the true valueBy the spread of readings, such as the standard deviation
munotes.in 2
PointAccuracyPrecision
4. Need of a true valueA known true or standard value is neededNo true value is needed
5. Effect of repeatingA single reading can be judgedOnly a set of repeated readings can be judged

Example

A voltmeter reads 5.20 V, 5.21 V and 5.20 V for a true voltage of 5.00 V. The readings are precise, as they agree closely. They are not accurate, since all are about 0.2 V too high. This points to a systematic error such as a zero error.

If another meter reads 4.8 V, 5.2 V and 5.0 V, the average is accurate, but the readings are not precise.

A good instrument is both accurate and precise.

Conclusion. Accuracy is closeness to the true value, and precision is closeness of repeated readings to each other. A set of readings can be precise without being accurate.

munotes.in 3

The rest of the answers

The first answer is free. The rest come with the F.E. (First Year Engineering) Semester 2 solved papers.

You have read the question paper and its first answer in full. Buy the solved papers once and you can read every answer of every solved paper in this semester.

Solved papers: ₹499 Already bought it? Sign in

The question paper itself stays free, and so does the syllabus.

Issue

Found an error in this volume? Report it and we will check it against the paper.

Done!