munotes®

Engineering Sem 2 Elements of Civil Engineering May 2026 Question Paper with Solutions

Mumbai University Solved Question Papers munotes.in

Elements of Civil Engineering

Engineering · Sem 2

May 2026 Examination

Previous Year Question Paper with Solution

munotes.in Mumbai

munotes.in

First published on munotes.in on 18 November 2026.

Published by munotes.in, Mumbai.

Model answers written and edited by the munotes.in editorial desk.

Passages from this volume may be quoted, in print, online or by an AI system, with credit: name munotes.in and link to this volume's page. The volume may not be reproduced as a whole. Full terms at munotes.in/content-license.

munotes.in is an independent study resource for students of the University of Mumbai. It is not affiliated with the University of Mumbai, and is not endorsed by it.

The University does not publish an official answer key for this paper. The answers in this volume are model answers, written to show how a full-mark answer is built. They are a study aid, not an authority on what an examiner marked.

The question paper reproduced here is the paper as set by the University of Mumbai at the May 2026 examination.

munotes.in ii
munotes.in iii
munotes.in iv

The Paper as Set

The questions in this volume are the questions asked at the May 2026 examination, reproduced as the University of Mumbai set them, in the order it set them. Nothing has been reworded, added or left out. Only the answers are ours. See the original question paper.

Duration 2 hours  ·  Total marks 60  ·  18 questions answered

Instructions printed on the paper

  • N.B. 1. Q 1 is compulsory. Attempt any three out of the remaining questions. 2. Figures to the right indicates full marks.

How to use this volume

Solve the paper first, under exam conditions and against the clock. Then read the answers here and mark your own. Reading a solution before attempting the question feels productive and teaches very little, because recognising an answer is not the same as being able to write one.

munotes.in v

Q 1

Q 1

compulsory · 15 Marks

munotes.in 1

aFor determining the alignment, width & thickness of a road, knowledge of which branch of Civil engineering is required ?[2]

Answer

For full marks, cover: the branch by name, and how it decides each of the three things asked.

Answer

The branch needed is transportation engineering, in particular its part called highway engineering.

  1. Alignment: highway engineers choose the route of the road by surveys. They balance a short length, easy gradients, low earthwork, safety and cost.
  2. Width: geometric design fixes the width of the carriageway, shoulders and right of way. It depends on the expected traffic and the number of lanes.
  3. Thickness: pavement design fixes the thickness of each layer (sub-base, base and surface). It depends on the traffic load and the strength of the soil below.

Highway engineering also takes help from geotechnical engineering, which tests the subgrade soil, and from surveying, which gives levels along the route.

Conclusion. Transportation (highway) engineering decides the alignment, width and thickness of a road.

munotes.in 2

The rest of the answers

The first answer is free. The rest come with the F.E. (First Year Engineering) Semester 2 solved papers.

You have read the question paper and its first answer in full. Buy the solved papers once and you can read every answer of every solved paper in this semester.

Solved papers: ₹499 Already bought it? Sign in

The question paper itself stays free, and so does the syllabus.

Issue

Found an error in this volume? Report it and we will check it against the paper.

Done!