munotes®

Engineering Sem 2 Digital Electronics May 2026 Question Paper with Solutions

Mumbai University Solved Question Papers munotes.in

Digital Electronics

Engineering · Sem 2

May 2026 Examination

Previous Year Question Paper with Solution

munotes.in Mumbai

munotes.in

First published on munotes.in on 18 November 2026.

Published by munotes.in, Mumbai.

Model answers written and edited by the munotes.in editorial desk.

Passages from this volume may be quoted, in print, online or by an AI system, with credit: name munotes.in and link to this volume's page. The volume may not be reproduced as a whole. Full terms at munotes.in/content-license.

munotes.in is an independent study resource for students of the University of Mumbai. It is not affiliated with the University of Mumbai, and is not endorsed by it.

The University does not publish an official answer key for this paper. The answers in this volume are model answers, written to show how a full-mark answer is built. They are a study aid, not an authority on what an examiner marked.

The question paper reproduced here is the paper as set by the University of Mumbai at the May 2026 examination.

munotes.in ii
munotes.in iii
munotes.in iv

The Paper as Set

The questions in this volume are the questions asked at the May 2026 examination, reproduced as the University of Mumbai set them, in the order it set them. Nothing has been reworded, added or left out. Only the answers are ours. See the original question paper.

Duration 2 hours  ·  Total marks 60  ·  16 questions answered

How to use this volume

Solve the paper first, under exam conditions and against the clock. Then read the answers here and mark your own. Reading a solution before attempting the question feels productive and teaches very little, because recognising an answer is not the same as being able to write one.

munotes.in v

1.

Q.1 15 Marks

munotes.in 1

(a)Compare TTL and CMOS logic families.[3]

Answer

For full marks, cover: what each family is built from, and a comparison table on at least eight points: supply, speed, power, noise margin, fan-out, unused inputs, static, cost and use.

The two families

  1. TTL (transistor-transistor logic) is built from bipolar junction transistors. The standard family is the 74 series, such as the 7400 quad 2-input NAND.
  2. CMOS (complementary metal oxide semiconductor) is built from pairs of p-channel and n-channel MOSFETs. The common family is the 4000 series, and the 74HC series is high-speed CMOS.

Comparison

PointTTL (standard 74 series)CMOS (4000 series)
Basic devicebipolar transistorsp- and n-channel MOSFETs
Supply voltagefixed 5 V (4.75 to 5.25 V)wide, 3 V to 15 V
munotes.in 2
PointTTL (standard 74 series)CMOS (4000 series)
Propagation delayabout 10 ns, fastlonger in the 4000 series; 74HC is about as fast as TTL
Power dissipationabout 10 mW per gatevery small when not switching (nanowatts); rises with frequency
Noise margin0.4 Vlarger, about 1.5 V at a 5 V supply
Fan-out1050 or more
Unused inputsact as HIGH if left opennever left open; tied to VDD or ground
Static chargenot sensitivedamaged easily; handled with care
Packing densitylowervery high, used in VLSI
Typical usefast circuits, older boardsbattery devices, microprocessors, memories

Conclusion. TTL is fast and sturdy but uses more power, while CMOS uses very little power, works over a wide supply range and has a better noise margin and fan-out, so most modern ICs are CMOS.

munotes.in 3

The rest of the answers

The first answer is free. The rest come with the F.E. (First Year Engineering) Semester 2 solved papers.

You have read the question paper and its first answer in full. Buy the solved papers once and you can read every answer of every solved paper in this semester.

Solved papers: ₹499 Already bought it? Sign in

The question paper itself stays free, and so does the syllabus.

Issue

Found an error in this volume? Report it and we will check it against the paper.

Done!