munotes®

Engineering Sem 1 Applied Physics Dec 2025 Question Paper with Solutions

Mumbai University Solved Question Papers munotes.in

Applied Physics

Engineering · Sem 1

Dec 2025 Examination

Previous Year Question Paper with Solution

munotes.in Mumbai

munotes.in

First published on munotes.in on 18 November 2026.

Published by munotes.in, Mumbai.

Model answers written and edited by the munotes.in editorial desk.

Passages from this volume may be quoted, in print, online or by an AI system, with credit: name munotes.in and link to this volume's page. The volume may not be reproduced as a whole. Full terms at munotes.in/content-license.

munotes.in is an independent study resource for students of the University of Mumbai. It is not affiliated with the University of Mumbai, and is not endorsed by it.

The University does not publish an official answer key for this paper. The answers in this volume are model answers, written to show how a full-mark answer is built. They are a study aid, not an authority on what an examiner marked.

The question paper reproduced here is the paper as set by the University of Mumbai at the Dec 2025 examination.

munotes.in ii
munotes.in iii
munotes.in iv

The Paper as Set

The questions in this volume are the questions asked at the Dec 2025 examination, reproduced as the University of Mumbai set them, in the order it set them. Nothing has been reworded, added or left out. Only the answers are ours. See the original question paper.

Duration 1½ hours  ·  Total marks 45  ·  19 questions answered

How to use this volume

Solve the paper first, under exam conditions and against the clock. Then read the answers here and mark your own. Reading a solution before attempting the question feels productive and teaches very little, because recognising an answer is not the same as being able to write one.

munotes.in v

1

Attempt any FIVE · 15 Marks

munotes.in 1

(a)Explain optical resonator in LASER?[3]

Answer

For full marks, cover: what the resonator is made of, how it sends the light back and forth through the active medium, why one mirror lets some light out, the condition for a standing wave, and what the resonator does for the beam.

What an optical resonator is

An optical resonator is the pair of mirrors placed at the two ends of the active medium of a laser. It is also called the resonant cavity. The mirrors face each other along one axis. They are either plane and exactly parallel, or curved with a common axis.

  1. Mirror M1 reflects almost all the light that falls on it.
  2. Mirror M2 reflects most of the light but lets a small part pass. This part is the output beam.

The figure, in words: the active medium, a rod or a gas tube, lies along the axis. M1 stands at the left end and M2 at the right end. The laser beam comes out through M2.

How it works

munotes.in 2
  1. Once population inversion is reached, a few atoms drop by spontaneous emission. Most of these photons go off sideways and are lost.
  2. Photons moving along the axis strike a mirror and are sent back into the medium.
  3. On every pass they cause more stimulated emission. So the light grows each time it crosses the medium.
  4. When the gain in one round trip is more than the loss, the light builds up into a strong beam. Part of it leaves through M2.

Condition for a standing wave

Only waves that fit a whole number of half wavelengths between the mirrors can build up:

L = m λ / 2, where L is the distance between the mirrors and m is a whole number.

Example quantityValue
Distance between the mirrors, L30 cm
Wavelength of a He-Ne laser, λ632.8 nm
munotes.in 3
Example quantityValue
Number of half waves, m = 2L / λabout 9.48 × 10⁵
Gap between allowed frequencies, c / 2L500 MHz

What the resonator does

It gives feedback, so the light is amplified many times over. It keeps only the light that moves along the axis, so the beam is highly directional. It allows only certain frequencies, so the beam is very monochromatic.

Conclusion. The optical resonator is a pair of mirrors at the two ends of the active medium, one fully and one partly reflecting. It sends the light back and forth so that stimulated emission builds it up. It makes the beam directional and monochromatic, and lets a part out as the laser beam.

munotes.in 4

The rest of the answers

The first answer is free. The rest come with the F.E. (First Year Engineering) Semester 1 solved papers.

You have read the question paper and its first answer in full. Buy the solved papers once and you can read every answer of every solved paper in this semester.

Solved papers: ₹499 Already bought it? Sign in

The question paper itself stays free, and so does the syllabus.

Issue

Found an error in this volume? Report it and we will check it against the paper.

Done!