Mumbai University Solved Question Papers munotes.in
Applied Chemistry
Engineering · Sem 1
Dec 2025 Examination
Previous Year Question Paper with Solution
munotes.in Mumbai
Mumbai University Solved Question Papers munotes.in
Applied Chemistry
Engineering · Sem 1
Dec 2025 Examination
Previous Year Question Paper with Solution
munotes.in Mumbai
First published on munotes.in on 18 November 2026.
Published by munotes.in, Mumbai.
Model answers written and edited by the munotes.in editorial desk.
Passages from this volume may be quoted, in print, online or by an AI system, with credit: name munotes.in and link to this volume's page. The volume may not be reproduced as a whole. Full terms at munotes.in/content-license.
munotes.in is an independent study resource for students of the University of Mumbai. It is not affiliated with the University of Mumbai, and is not endorsed by it.
The University does not publish an official answer key for this paper. The answers in this volume are model answers, written to show how a full-mark answer is built. They are a study aid, not an authority on what an examiner marked.
The question paper reproduced here is the paper as set by the University of Mumbai at the Dec 2025 examination.
The questions below are the paper as the University of Mumbai set it at the Dec 2025 examination, in the order it was set.
MarksPage
MarksPage
The questions in this volume are the questions asked at the Dec 2025 examination, reproduced as the University of Mumbai set them, in the order it set them. Nothing has been reworded, added or left out. Only the answers are ours. See the original question paper.
Duration 1½ hours · Total marks 45 · 19 questions answered
How to use this volume
Solve the paper first, under exam conditions and against the clock. Then read the answers here and mark your own. Reading a solution before attempting the question feels productive and teaches very little, because recognising an answer is not the same as being able to write one.
Attempt any five questions · 15 Marks
Answer
For full marks, cover: the definition of calorific value with its units and its two kinds, the four results of proximate analysis with how each is found, and what each result tells the user of the coal.
Calorific value is the total heat set free when a unit mass of a fuel burns completely in air or oxygen. For a gas, a unit volume is taken in place of a unit mass.
For solid and liquid fuels it is given in cal/g or kcal/kg, and in SI units in kJ/kg. For gases it is given in kcal/m³. One cal/g is the same as one kcal/kg.
It has two kinds. The gross (higher) calorific value counts the heat given out when the steam formed condenses to water. The net (lower) calorific value leaves out this heat, because in a furnace the steam escapes with the flue gases.
Proximate analysis finds four things in coal by simple heating and weighing.
| Result | How it is found |
|---|---|
| Moisture | Loss in weight when 1 g of powdered coal is heated at 105 to 110 °C for one hour |
| Volatile matter | Further loss when the dried coal is heated at 925 °C for seven minutes in a covered crucible |
| Ash | Residue left after burning the rest in an open crucible at about 700 to 750 °C |
| Fixed carbon | 100 minus the sum of the three percentages above |
Conclusion. Calorific value is the heat a unit mass of fuel gives on complete burning, gross or net. Proximate analysis judges a coal quickly. Low moisture, low ash, high fixed carbon and a volatile matter suited to the use mark a good coal.
The rest of the answers
You have read the question paper and its first answer in full. Buy the solved papers once and you can read every answer of every solved paper in this semester.
Solved papers: ₹499 Already bought it? Sign in
The question paper itself stays free, and so does the syllabus.
What should we fix or add?
Found an error in this volume? Report it and we will check it against the paper.