B.E. (Computer Engineering) Basic Electrical and Electronics Engineering Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Basic Electrical and Electronics Engineering
Module 0: Prerequisite
- Resistance, inductance, capacitance, series and parallel connections of resistance, concepts of voltage, current, power and energy and its units. Magnetic circuits, MMF, Magnetic field strength, reluctance.
Module I: 01
- DC Circuits: (Only independent sources) Kirchhoff’s Laws, Ideal and Practical Voltage and Current Sources, Source Transformation, Mesh and Nodal Analysis (no super node and super mesh) Star-Delta / Delta-Star Transformations, Superposition Theorem, Thevenin’s Theorem, Norton’s Theorem and Maximum Power Transfer Theorem.
Module II: 02
- AC Circuits: Generation of alternating voltage, basic definitions, average and RMS values, phasor and phase difference, sums on phasors, Single-phase ac series and parallel circuits consisting of R, L, C, RL, RC, RLC combinations, definitions - real, reactive and apparent power, admittance (Y), Series and parallel resonance (only theory). Generation of Three-Phase Voltages, voltage & current relationships in Star and Delta Connections.
Module III: 03
- Single Phase Transformer: (Numerical are not expected) Working principle of single-phase transformer, types of single- phase transformer, transformation ratio, actual (practical) and ideal transformer, Transformer losses, efficiency, applications of transformer.
Module IV: 04
- Electrical Machines: (Numerical are not expected) principle of operation, constructional details, classification and applications of DC Motor, three phase induction motor, Single-Phase induction motors and BLDC motor
Module V: 05
- Special Purpose Diodes: (Numerical are not expected) Characteristics and operation of Zener Diode and application as a voltage regulator. Basic and structure of LED. Application of LED in indicative and lighting displays.
Module VI: 06
- Introduction to Transistors: (Numerical are not expected) structure and operation of BJT. BJT configurations (only common emitter). FET structure and operation. Application of BJT and FET in amplification, switching and oscillators.
Text Books
- 1 V. N. Mittal and Arvind Mittal “Basic Electrical Engineering” Tata McGraw Hill, (Revised Edition)
- 2 Vincent Del Toro “Electrical Engineering Fundamentals”, PHI Second edition, 2011
- 3 Edward Hughes “Hughes Electrical and Electronic Technology”, Pearson Education (Tenth edition)
- 4 D P Kothari and I J Nagrath “Theory and Problems of Basic Electrical Engineering”, PHI 13th edition 2011.
- 5 M. Naidu,S. Kamakshaiah “Introduction to Electrical Engineering” McGraw-Hill Education, 2004.
- 6 B.R Patil “Basic Electrical Engineering” Oxford Higher Education,
- 7 Electronic Devices and Circuit Theory" by Robert L. Boylestad and Louis Nashelsky
- 1 B.L. Theraja “Electrical Engineering “ Vol-I and II
- 2 S.N. Singh, “Basic Electrical Engineering” PHI , 2011Book
Reproduced from the University of Mumbai syllabus for B.E. (Computer Engineering) under NEP 2020, in force from the academic year 2024-25. Wording is as printed in that syllabus. Module numbering is as printed there too.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.