B.E. (Chemical Engineering) Process Calculations Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Process Calculations
Module 1: Material Balance without Chemical Reactions printed in the syllabus as Module Detailed Content
- Introduction, general material balance equation, degree of freedom analysis for individual units, solving material balance problems for various unit operations under steady and unsteady state conditions.
Module 2: Material Balance with Chemical Reactions printed in the syllabus as Module Detailed Content
- Concept of limiting and excess reactants, conversion and yield, selectivity and degree of completion of reaction.
Module 3: Recycle, Bypass and Purge Operations printed in the syllabus as Module Detailed Content
- Material Balance calculations for both with and without chemical reactions.
Module 4: Energy Balance printed in the syllabus as Module Detailed Content
- Heat capacity, sensible heat, latent heat, calculation of enthalpy changes. General energy balance equation. Energy balances for process involving chemical reaction including adiabatic reactions.
Module 5: Combustion printed in the syllabus as Module Detailed Content
- Combustion theory and equations, Theoretical excess air and equivalence ratio, Proximate and ultimate analysis of coal, Numerical related to calorific values of fuel from composition, air requirement and composition of flue gases. Introduction of humidification, theory of wet bulb and dry bulb temperature.
Module 6: Combined Material and Energy Balance printed in the syllabus as Module Detailed Content
- Material and energy balance for binary distillation.
Text Books
- 1 Narayan, K. V. and Lakshmikutty, B. “Stioichiometry and Process Calculations”, 1st edition,
- 2 Bhatt, B. I. and Thakore, S. B., “Stoichimetry, 5th edition, Tata McGraw Hill Education Private Limited, New Delhi
- 3 Ch. Durga Prasad Rao and D. V. S. Murthy, “Process Calculations for Chemical
- 4 O. A. Hougen, K. M. Watson, and R. A. Ragatz., “Chemical process principles-part 1, Material and
- 1 Himmelblau, D. M. and Riggs, J. B., “Basic Principles and Calculations in Chemical Engineering, 7th edition, Prentice Hall of India Pvt. Ltd., New Delhi (2009)
- 1 https://archive.nptel.ac.in/courses/103/103/103103165/ NPTEL: BASIC PRINCIPLES AND CALCULATIONS IN CHEMICAL ENGINEERING
Reproduced from the University of Mumbai syllabus for B.E. (Chemical Engineering) under NEP 2020, in force from the academic year 2025-26. Wording is as printed in that syllabus. Modules are numbered in sequence here; in the syllabus itself, Module 1 is printed as Module Detailed Content; Module 2 is printed as Module Detailed Content; Module 3 is printed as Module Detailed Content; Module 4 is printed as Module Detailed Content; Module 5 is printed as Module Detailed Content; Module 6 is printed as Module Detailed Content. The PDF above is the syllabus's own page, unaltered.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.