munotes®

B.E. (Chemical Engineering) Process Calculations Lab Syllabus - Mumbai University 2026

The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.

Process-Calculations-Lab.pdf
Semester 3 · Second Year BE Chemical

Loading syllabus...

Syllabus for Process Calculations Lab

Semester 3 · Second Year BE Chemical

Module 1: Evaluation of unknown Normality / Molarity / Molality of solutions printed in the syllabus as Module List of Experiments

  • using titrimetric analysis.

Module 2: Material balance over different unit operations. printed in the syllabus as Module List of Experiments

Module 3: Limiting reactant and excess reactant for chemical reaction. printed in the syllabus as Module List of Experiments

Module 4: Material balance Calculation of Recycle in EXCEL. printed in the syllabus as Module List of Experiments

Module 5: Material balance Calculation of Purge in EXCEL. printed in the syllabus as Module List of Experiments

Module 6: Energy balance over different unit operations. printed in the syllabus as Module List of Experiments

Module 7: Heat of reaction and Hess’s law of heat summation. printed in the syllabus as Module List of Experiments

Module 8: To calculate the heat of reaction. printed in the syllabus as Module List of Experiments

Module 9: To calculate the heat of combustion. printed in the syllabus as Module List of Experiments

Module 10: Measurement of Dew Point Temperature. printed in the syllabus as Module List of Experiments

Module 11: Estimation of properties of Water and Steam from Psychrometric printed in the syllabus as Module List of Experiments

  • Chart.

Module 12: Excess air calculation in hydrocarbon fuel oil fired furnace. printed in the syllabus as Module List of Experiments

Module 13: Calculating boiler and process thermal heater efficiency by input- printed in the syllabus as Module List of Experiments

  • output and heat loss method in EXCEL

Module 14: Material and energy balance calculation over the binary distillation in printed in the syllabus as Module List of Experiments

  • EXCEL.

Reproduced from the University of Mumbai syllabus for B.E. (Chemical Engineering) under NEP 2020, in force from the academic year 2025-26. Wording is as printed in that syllabus. Modules are numbered in sequence here; in the syllabus itself, Module 1 is printed as Module List of Experiments; Module 2 is printed as Module List of Experiments; Module 3 is printed as Module List of Experiments; Module 4 is printed as Module List of Experiments; Module 5 is printed as Module List of Experiments; Module 6 is printed as Module List of Experiments; Module 7 is printed as Module List of Experiments; Module 8 is printed as Module List of Experiments; Module 9 is printed as Module List of Experiments; Module 10 is printed as Module List of Experiments; Module 11 is printed as Module List of Experiments; Module 12 is printed as Module List of Experiments; Module 13 is printed as Module List of Experiments; Module 14 is printed as Module List of Experiments. The PDF above is the syllabus's own page, unaltered.

The complete syllabus

This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.

PDF Revised Syllabus for B.E. (Chemical Engineering), Semester I & II - the whole circular REV-2019 'C' Scheme syllabus Read full PDF Read
PDF B.E. (Chemical Engineering), Semester III & IV - the whole circular REV-2019 'C' Scheme syllabus Read full PDF Read
PDF B.E. (Chemical Engineering), Semester V & VI - the whole circular REV-2019 'C' Scheme syllabus Read full PDF Read
PDF Revised Syllabus for B.E. Final Year Chemical Engineering, Semester VII & VIII - the whole circular REV-2019 'C' Scheme syllabus Read full PDF Read
Report or request
Done!