B.E. (Biomedical Engineering) Applied Electronics for BME Lab Syllabus - Mumbai University 2026
This is the Second Year Biomedical NEP 2020 syllabus under NEP 2020, in force from the academic year 2025-26. The University also publishes a REV-2019 'C' Scheme syllabus for these same two semesters, which is what ATKT candidates of the earlier batches sit. Check which scheme your examination form names before you revise.
Loading syllabus...
Syllabus for Applied Electronics for BME Lab
Module 1
- Use electronic lab instruments for testing and troubleshooting electronic circuits. Read the data sheet of different ICs, compare the parameters to select appropriate IC. To design and implement various building blocks of different biomedical instruments. List of Experiments
Module 6: To verify outputs of various linear circuits using op-amps.
Module 7: To verify outputs of various nonlinear circuits using op-amps.
Module 8: To generate sine wave using RC phase shift oscillator using 2 different op amp ICs
Module 9: To generate sine wave using Wein bridge oscillator
Module 10: Design and implement monostable multivibrator using IC 555
Module 11: Design and implement astable multivibrator using IC 555
Module 12: Verify various outputs of IC 4047
Module 13: To verify output of PLL
Module 14: Implement any one Biomedical application
Module 15: To design regulated power supply.
Reproduced from the University of Mumbai syllabus for B.E. (Biomedical Engineering) under NEP 2020, in force from the academic year 2025-26. Wording is as printed in that syllabus. Module numbering is as printed there too.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.