B.E. (Biomedical Engineering) Engineering Workshop I Syllabus - Mumbai University
This is the First Year Biomedical NEP 2020 syllabus under NEP 2020, in force from the academic year 2024-25. The University still sets the earlier Choice Based papers alongside it for ATKT candidates, so check which scheme your exam form names before you revise.
Loading syllabus...
Syllabus for Engineering Workshop-I
Lab Objectives
- 1 To impart training to help the students develop engineering skill sets.
- 2 To inculcate respect for physical work and hard labor.
- 3 To get exposure to the interdisciplinary engineering domain.
Lab Outcomes: Learners will be able to…
- 1 Develop the necessary skill required to handle/use different fitting tools.
- 2 Develop skill required for hardware maintenance.
- 3 Able to install an operating system and system drives.
- 4 Able to identify the network components and perform basic networking and crimping.
- 5 Able to prepare the edges of jobs and do simple arc welding.
- 6 Develop the necessary skill required to handle/use different plumbing tools and simple job. Sr. No. LO Detailed Content Hrs. Mapping Note: Trade 1 and 2 are compulsory. Select any ONE trade topics out of the topic at trade 3 to 5. Demonstrations and hands on experience to be provided during the periods allotted for the same. Report on the demonstration including suitable sketches is also to be included in the term work CO-1 is related to Trade-1 CO-2 to CO-4 is related to Trade-2 CO-5 is related to Trade-3 CO-6 is related to Trade-4 CO-7 is related to Trade-5 CO evaluation is to be done according to the opted Trades in addition to Compulsory Trades. Fitting (Compulsory):
- Use and setting of fitting tools for chipping, cutting, filing, marking, center punching, drilling, tapping. 04 LO1 Trade-1
- Term work to include one job involving following operations : filing to size, one simple male- female joint, drilling and tapping 58 Hardware and Networking: (Compulsory)
- Dismantling of a Personal Computer (PC), Identification of LO2, Components of a PC such as power supply, motherboard, LO3, processor, hard disk, memory (RAM, ROM), CMOS battery, CD LO4 drive, monitor, keyboard, mouse, printer, scanner, pen drives, 06 disk drives etc. Assembling of PC, Installation of Operating Trade-2 System (Any one) and Device drivers, Boot-up sequence. Installation of application software (at least one) Basic troubleshooting and maintenance Identification of network components: LAN card, wireless card, switch, hub, router, different types of network cables (straight cables, crossover cables, rollover cables) Basic networking and crimping. NOTE: Hands on experience to be given in a group of not more than four students Welding:
- Edge preparation for welding jobs. Arc welding for different job LO5 06 Trade-3 like, Lap welding of two plates, butt welding of plates with simple cover, arc welding to join plates at right angles. Plumbing:
- Use of plumbing tools, spanners, wrenches, threading dies, 04 LO6 Trade 4 demonstration of preparation of a domestic line involving fixing of a water tap and use of coupling, elbow, tee, and union etc. Machine Shop: 06 Trade-5 ● At least one turning job is to be demonstrated and simple job to LO6 be made for Term Work in a group of 4 students. Term Work: Term Work shall consist of at least 3 Trade based on the above list. Also, Term work. Term Work Marks: 25 Marks (Total marks) = 2 0 Marks (Workshop Experiment) + 5 Marks (Attendance)
Reproduced from the University of Mumbai syllabus for B.E. (Biomedical Engineering) under NEP 2020, in force from the academic year 2024-25. Wording is as printed in that syllabus. The University sets no module list for this course; what she publishes is the objectives, outcomes and assessment guidelines reproduced above.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.