B.E. (Automobile Engineering) Mechanical Measurements and Controls Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Mechanical Measurements and Controls
principles and definition, Standards of measurement, Errors in measurements, International standardization.
- 1.2 Limits, fits and tolerances of interchangeable manufacture, Elements of interchangeable system, Hole based and shaft based systems, Tolerance grades, Types of fits, General requirements of Go & No go gauging, Taylor’s principle, Design of Go & No go gauges.
Module 2
- 2.1 Principles of interference, Concept of flatness, Flatness testing, Optical flats, Optical Interferometer and Laser interferometer.
- 2.2 Surface texture measurement: importance of surface conditions, roughness and waviness, surface roughness standards specifying surface roughness parameters - Ra, Ry, Rz, RMS value etc., Surface roughness measuring instruments.
- 2.3 Screw Thread measurement: Two wire and three wire methods, Floating carriage micrometer.
- 2.4 Gear measurement: Gear tooth comparator, Master gears, Measurement using rollers and Parkinson’s Tester.
Module 3
- 3.1 Significance of Mechanical Measurements, Classification of measuring instruments, generalized measurement system, types of inputs: Desired, interfering and modifying inputs.
- 3.2 Static characteristics: Static calibration, Linearity, Static Sensitivity, Accuracy, Static error, Precision, Reproducibility, Threshold, Resolution, Hysteresis, Drift, Span & Range etc. University of Mumbai , Rev 2019 10
Reproduced from the University of Mumbai syllabus for B.E. (Automobile Engineering) under REV-2019 'C' Scheme, in force from the academic year 2021-22. Wording is as printed in that syllabus. Module numbering is as printed there too.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.