B.E. (Automobile Engineering) Measurement and Engine Testing Lab Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Measurement and Engine Testing Lab
Objectives
- 1 To acquaint with the various methods for measurement of engine performance.
- 2 To analyse engine emissions.
- 3 To familiarise with latest developments in engine Technology
Outcomes: Learner will be able to…
- 1 Overhaul and Assemble engine components.
- 2 Perform load test/speed test on engine setup.
- 3 Calculate performance of multi cylinder engine.
- 4 Analyse engine performance and draw heat balance sheet.
- 5 Perform exhaust gas analysis.
- 6 Get acquainted with Calibration of sensors. Term work: Term work shall consist of minimum 8 exercises, from the list as per following details: a) 2 must be actual experiments from Part A. From Part A exercise 1 is compulsory. b) 4 must be actual experiments from Part B c) 2 must be actual experiments from Part C PART A: Dismantle and assemble the following:
- 1 2-Stroke/4-Stroke Engines
- 2 Carburettor
- 3 Ignition system
- 4 Fuel injection system PART B: Actual Test experiments:
- 1 Morse Test on Multi-cylinder S.I. engine
- 2 Speed Test on Spark Ignition or/and Compression Ignition engine
- 3 Load Test on Diesel engine.
- 4 Heat Balance Sheet on S.I. or C.I. engine.
- 5 Determination of Air fuel ratio and volumetric efficiency of the engine
- 6 Exhaust Gas/Smoke analysis of S.I./ C.I. engines PART C: Measurement Experiments:
- 1 Calibration of Tachometers.
- 2 Study of Pressure, Torque, Temperature, Flow Measurement Sensors in IC engine.
- 3 System Identification of any one of the sensors. University of Mumbai , Rev 2019 28 PART D: Topics for Case study of various models: I. Variable Valve Timing II. Twin and Triple Turbo charging III. Variable Compression Ratio Engine IV. Electronic MPFI with various modes V. Single overhead camshaft and double overhead camshaft VI. Engine Downsizing VII. Eco-boost Engine VIII. Turbocharging for S.I. Engine Term Work: The distribution of marks for term work shall be as follows:
- 1 Laboratory work (8 Exercises): 15 marks
- 2 Case study: 05 marks
- 3 Attendance: 05 marks Practical and Oral Examination: A. Pair of Internal and External Examiner should conduct practical/Oral exam. B. Distribution of marks for practical and oral examination shall be as follows: i. Practical performance 15 marks ii. Oral 10 marks C. Evaluation of practical examination to be done based on the experiment performed and the output of the experiment during practical examination. D. Student’s work along with evaluation report to be preserved till the next exam. University of Mumbai , Rev 2019 29
Reproduced from the University of Mumbai syllabus for B.E. (Automobile Engineering) under REV-2019 'C' Scheme, in force from the academic year 2021-22. Wording is as printed in that syllabus. The University sets no module list for this course; what she publishes is the objectives, outcomes and assessment guidelines reproduced above.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.