B.E. (Automobile Engineering) Machine Design Lab Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Machine Design Lab
Objectives
- 1 To study basic principles of machine design
- 2 To familiarize with the use of design data books & various codes of practice
- 3 To identify potential failures associated with a machine component by using DFMEA.
Outcomes: Learner will be able to…
- 1 Design Knuckle Joint and cotter joint
- 2 Design shaft under various conditions.
- 3 Design rigid and flexible flange couplings.
- 4 Design helical compression spring and leaf spring.
- 5 Use design data books in designing various components.
- 6 Report uncertainties associated with potential failure modes inherited from the component design. Term Work: (Comprises part A, B & C) A) Term work - Shall consist of (minimum 3) design exercises from the list which may include computer-aided drawing on A3 size sheets.
- 1 Knuckle Joint/cotter joint
- 2 Rigid/ Flexible flange couplings
- 3 Leaf springs
- 4 C-clamps along with the Frame B) Assignment: Design exercises in the form of design calculations with sketches and/ or drawings on the following machine elements.
- 1 Bolted and welded joints
- 2 Combined stresses problem using the theories of failure.
- 3 Shaft design with/ without the use of ASME Code.
- 4 Design against fluctuating loads (For finite and infinite life)
- 5 Design of Gears C) Case Study: A case study should be given to either individual or a group of two students to report uncertainties associated with potential failure modes inherited from a component design using the DFMEA approach. The distribution of marks for term work shall be as follows: • Part A: 10 marks. • Part B: 05 marks. • Part C: 05 marks • Attendance: 05 Marks. University of Mumbai , Rev 2019 30
Reproduced from the University of Mumbai syllabus for B.E. (Automobile Engineering) under REV-2019 'C' Scheme, in force from the academic year 2021-22. Wording is as printed in that syllabus. The University sets no module list for this course; what she publishes is the objectives, outcomes and assessment guidelines reproduced above.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.