B.E. (Automation and Robotics) Digital Electronics Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Digital Electronics
Prerequisite:
- Logic gates- Basic gates- AND, OR and NOT, Universal Gates- NAND and NOR, Derived Gates- EX-OR and EX-NOR
Module I: Number Systems & Boolean Algebra:
- Decimal, binary, octal, hexadecimal number system and conversion, binary weighted codes, signed numbers, 1s and 2s complement codes, Binary arithmetic Binary logic functions, Boolean laws, truth tables, associative and distributive properties, De-Morgans theorems, realization using logic gates.
Module II: Combinational Logic
- Switching equations, canonical logic forms, sum of product & product of sums, Karnaugh maps two, three and four variable, simplification of expressions, don’t care conditions K-map, Quine McCluskey minimization technique, mixed logic combinational circuits, multiple output functions.
Module III: Analysis & design of Combinational Logic:
- Adders, Subtractors, Code conversion, Parity checker, BCD adder, Multiplexer, Demultiplexer, Encoder and Decoder. Implementation of combinational logic circuits using Multiplexer and Demultiplexer. Hazards in logic circuits and its elimination.
Module IV: Sequential Logic:
- Flip flops- SR, JK, D, T and Master slave JK, Realization of one flip flop using other flip flops, Shift registers, Universal Shift Register, Asynchronous & Synchronous counters, Modulus of counters.
Module V: Digital integrated circuits:
- Logic levels, propagation delay time, power dissipation fan-out and fan-in, noise margin, logic families and their characteristics TTL, CMOS and ECL integrated circuits and their performance comparison, open collector and tristate gates and buffers.
Module VI: Memory and programmable logic devices:
- PROM / EPROM / EEPROM / EAPROM Programmable Logic Devices – Programmable Logic Array (PLA), Programmable Array Logic (PAL), Introduction to Complex Programmable Logic Device (CPLD), Introduction and basic concepts of FPGA, VHDL and Verilog – Implementation of AND, OR, Adders using VHDL and Verilog Total Hours
Text Books
- 1 A.S. Sedra & K.C.Smith, Microelectronics Circuits, Oxford University Press (1997)
- 2 A.P. Malvino, Electronic Principles, Tata Mcgraw Hill Publications
- 3 Robert L. Boylestad & Louis Nashelsky, Electronic Devices & Circuit Theory
- 4 William Kleitz, Digital Electronics, Prentice Hall International Inc.
- 1 M. S. Tyagi, Introduction to Semiconductor Materials and Devices, John Wiley & Sons Inc.
- 2 Michael Shur, Introduction to Electronic Devices, John Wiley & Sons Inc., 2000.
- 3 R. T. Howe and C. G. Sodini, Microelectronics: An Integrated Approach, PrenticeHall Inc. 1997.
- 4 Jacob Millman, and C.C. Halkias, “Electronic devices and circuits”, TMH Publications.
- 5 Ben G. Streetman, Solid State Electronic Devices, PHI, 5th Ed, 2001.3.
Reproduced from the University of Mumbai syllabus for B.E. (Automation and Robotics) under NEP 2020, in force from the academic year 2025-26. Wording is as printed in that syllabus. Module numbering is as printed there too.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.