B.E. (Biomedical Engineering) Basic Electrical and Electronics Engineering Lab Syllabus - Mumbai University

Module 1: Basic safety precautions. Introduction and use of measuring instruments - voltmeter, ammeter, multi-meter, oscilloscope. Real List of Assignments / Tutorials life resistors, capacitors, and inductors

• To measure output voltage across load resistor/current through load resistor and verify the result using Mesh and Nodal analysisAssignment on Basic electrical safety practices 0302 Verification of Superposition Theorem.Numerical assignment on Mesh analysis and nodal analysis

Module 4: Verification Thevenin’s and Norton's theorem Numerical assignment on Thevenin, Norton, and maximum power

Module 3: Verification Maximum Power Transfer Theorem.transfer theorem

Module 4

• To find the resistance andNumerical assignment on series and parallel circuitsinduct ce of a coil connected in series

Module 6: with a pure resistance using the voltmeter methodAssignment on single-phase transformer

Module 6: To Assignment on DC and AC machine measure the relationship between phase and line, currents and

Module 7: voltages in threeAssignment on special purpose diodes-phase system (star & delta)

• 0808 To demonstrate cutAssignment on BJT and FET-out sections of the single -phase transformer.

Module 9: To demonstrate cut-out sections of the DC machine

Module 10: To plot Zener diode voltage regulation characteristics

Module 11: To demonstrate the application of LED in indicative and lighting display

Module 12: To demonstrate the application of BJT as a switch

Module 13: To demonstrate BJT/FET as an amplifier