B.E. (Chemical Engineering) Software Application in Chemical Engineering Lab Syllabus - Mumbai University 2026
The University has moved this degree onto NEP 2020 one year at a time. The first and second years are NEP 2020 syllabi; the third and fourth years are still examined on the REV-2019 'C' Scheme, which is what the University sets for them this year.
Loading syllabus...
Syllabus for Software application in Chemical Engineering Lab
Module 1 printed in the syllabus as Module List of Experiments (minimum eight)
- Experiment Details of Experiment Lab Hours No. Simulation of Pipe Network (Pressure drop, Friction factor 1 Head Losses, Pump Power, NPSH) Simulation of Heat Transfer Equipment’s (Heater and Cooler 2 ,Double Pipe or Shell and Tube Heat exchangers, Plate Type Heat Exchanger )
Module 2 printed in the syllabus as Module List of Experiments (minimum eight)
- Simulation of Chemical Reactors (Plug Flow or Continuous Stirred Tank Reactor, Bubble Column Reactor ) Simulation of distillation Column (Separation of Butanol and
Module 3 printed in the syllabus as Module List of Experiments (minimum eight)
- 4 Water system) Simulation of Pressure Swing Azeotropic Distillation
Module 4 printed in the syllabus as Module List of Experiments (minimum eight)
- 5 (Methanol and Acetone) Simulation of Advanced Divided Distillation Column
Module 5 printed in the syllabus as Module List of Experiments (minimum eight)
- 6 (Benzene-Toluene-Xylene) Simulation of Thermodynamic cycles (Rankin cycle or Vapor
Module 6 printed in the syllabus as Module List of Experiments (minimum eight)
- 7 Compression Cycle ,Vapor Absorption cycle) Simulation of Extractive Distillation (Methyl Cyclo
Module 8 printed in the syllabus as Module List of Experiments (minimum eight)
- Simulation of Absorption and Desorption Column
Module 9 printed in the syllabus as Module List of Experiments (minimum eight)
- Simulation of any hydrogenation process
Module 10 printed in the syllabus as Module List of Experiments (minimum eight)
- Students should be able to simulate process models using computer program or chemical
Module 11 printed in the syllabus as Module List of Experiments (minimum eight)
- engineering software such as COCOO/DWSIM/Unisim,/ CWsim, /ChemCAD,/Hysys/ Aspen
Module 12 printed in the syllabus as Module List of Experiments (minimum eight)
- Plus /CFD or any simulator.
Reference Book
- 1 William Y.Luyben, Process Modelling simulation and control for chemical Engineer,
- 2 Process Engineering and Design: Shuchen B. Thakore, Bharat I Bhatt, Second Ed.,
Reproduced from the University of Mumbai syllabus for B.E. (Chemical Engineering) under R-2019 'C' Scheme, in force from the academic year 2022-23. Wording is as printed in that syllabus. Modules are numbered in sequence here; in the syllabus itself, Module 1 is printed as Module List of Experiments (minimum eight); Module 2 is printed as Module List of Experiments (minimum eight); Module 3 is printed as Module List of Experiments (minimum eight); Module 4 is printed as Module List of Experiments (minimum eight); Module 5 is printed as Module List of Experiments (minimum eight); Module 6 is printed as Module List of Experiments (minimum eight); Module 8 is printed as Module List of Experiments (minimum eight); Module 9 is printed as Module List of Experiments (minimum eight); Module 10 is printed as Module List of Experiments (minimum eight); Module 11 is printed as Module List of Experiments (minimum eight); Module 12 is printed as Module List of Experiments (minimum eight). The PDF above is the syllabus's own page, unaltered.
The complete syllabus
This subject is cut from the University circular for its year. Open a document here if you want the whole thing rather than a single subject.