regarding revised syllBE in Biomedical Engg_1 Syllabus Mumbai University


regarding revised syllBE in Biomedical Engg_1 Syllabus Mumbai University by munotes

Page 1

Page 2

Copy to : -
1. The Deputy Registrar, Academic Authorities Meetings and Services
(AAMS),
2. The Deputy Registrar, College Affiliations & Development
Department (CAD),
3. The Deputy Registrar, (Admissions, Enrolment, Eligibility and
Migration Department (AEM),
4. The Deputy Registrar, Research Administration & Promotion Cell
(RAPC),
5. The Deputy Registrar, Executive Authorities Section (EA),
6. The Deputy Registrar, PRO, Fort, (Publi cation Section),
7. The Deputy Registrar, (Special Cell),
8. The Deputy Registrar, Fort/ Vidyanagari Administration Department
(FAD) (VAD), Record Section,
9. The Director, Institute of Distance and Open Learni ng (IDOL Admin),
Vidyanagari,
They are requested to treat this as action taken report on the concerned
resolution adopted by the Academic Council referred to in the above circular
and that on separate Action Taken Report will be sent in this connection.

1. P.A to Hon’ble Vice -Chancellor,
2. P.A Pro -Vice-Chancellor,
3. P.A to Registrar,
4. All Deans of all Faculties,
5. P.A to Finance & Account Officers, (F.& A.O),
6. P.A to Director, Board of Examinations and Evaluation,
7. P.A to Director, Innovation, Incubation and Linkages,
8. P.A to Director, Board of Lifelong Learning and Extension (BLLE),
9. The Director, Dept. of Information and Communication Technology
(DICT) (CCF & UCC), Vidyanagari,
10. The Director of Board of Student Development,
11. The Director, Dep artment of Students Walfare (DSD),
12. All Deputy Registrar, Examination House,
13. The Deputy Registrars, Finance & Accounts Section,
14. The Assistant Registrar, Administrative sub -Campus Thane,
15. The Assistant Registrar, School of Engg. & Applied Sciences, Kalyan ,
16. The Assistant Registrar, Ratnagiri sub -centre, Ratnagiri,
17. The Assistant Registrar, Constituent Colleges Unit,
18. BUCTU,
19. The Receptionist,
20. The Telephone Operator,
21. The Secretary MUASA

for information.

Page 3


Page 4



AC : 23/07/2020
Item No.: 139

UNIVERSITY OF MUMBAI



Bachelor of Engineering
in
Biomedical Engineering
Second Year with Effect from AY 2020 -21
Third Year with Effect from AY 2021 -22
Final Year with Effect from AY 2022 -23
(REV - 2019 ‘C’ Scheme) from Academic Year 2019 – 20
Under
FACULTY OF SCIENCE &
TECHNOLOGY


(As per AICTE guidelines with effect from the academic year
2019 –2020)

Page 5

2



University of Mumbai, Biomedical Engineering, Rev 2020 -21



















Date


Dr. S. K. Ukarande Dr Anuradha Muzumdar
Associate Dean Dean
Faculty of Science and Technology Faculty of Science and Technology
University of Mumbai University of Mumbai Sr. No. Heading Particulars
1 Title of the Course Second Year B.E. Biomedical Engineering
2 Eligibility for Admission
After Passing First Year Engineering as per the
Ordinance 0.6242
3 Passing Marks 40%
4 Ordinances /
Regulations ( if any) Ordinance 0.6242
5 No. of Years / Semesters 8 semesters
6 Level P.G. / U.G. / Diploma / Certificate
(Strike out which is not applicable)
7 Pattern Yearly / Semester
(Strike out which is not applicable )
8 Status New / Revised
(Strike out which is not applicable )
9 To be implemented from
Academic Year With effect from Academic Year: 2020 -2021



















































































AC: 23/07/2020



Item No. : 139







Syllabus for Approval

Page 6

3



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Preamble
To meet the challenge of ensuring excellence in engineering education, the issue of quality needs to be
addressed, debated and taken forward in a systematic manner. Accreditation is the principal means of
quality assurance in higher education. The major emphasis of accreditation process is to measure the
outcomes of the program that is being accredited. In l ine with this Faculty of Science and Technology (in
particular Engineering)of University of Mumbai has taken a lead in incorporating philosophy of outcome
based education in the process of curriculum development.
Faculty resolved that course objectives and course outcomes are to be clearly defined for each course, so
that all faculty members in affiliated institutes understand the depth and approach of course to be taught,
which will enhance learner’s learning process. Choice based Credit and grading system enables a much -
required shift in focus from teacher -centric to learner -centric education since the workload estimated is
based on the investment of time in learning and not in teaching. It also focuses on continuous evaluation
which will enhance the quali ty of education. Credit assignment for courses is based on 15 weeks teaching
learning process, however content of courses is to be taught in 12 -13 weeks and remaining 2 -3 weeks to be
utilized for revision, guest lectures, coverage of content beyond syllabu s etc.
There was a concern that the earlier revised curriculum more focused on providing information and
knowledge across various domains of the said program, which led to heavily loading of students in terms
of direct contact hours. In this regard, facult y of science and technology resolved that to minimize the burden of
contact hours, total credits of entire program will be of 170, wherein focus is not only on providing knowledge but
also on building skills, attitude and self learning. Therefore in the pr esent curriculum skill based laboratories and mini
projects are made mandatory across all disciplines of engineering in second and third year of programs, which will
definitely facilitate self learning of students. The overall credits and approach of curri culum proposed in the present
revision is in line with AICTE model curriculum.
The present curriculum will be implemented for Second Year of Engineering from the academic year 2020 -
21. Subsequently this will be carried forward for Third Year and Final Year Engineering in the academic
years 2021 -22, 2022 -23, respectively.
Dr. S. K. Ukarande
Associate Dean
Faculty of Science and Technology
Member, Academic Council, RRC in Engineering
University of Mumbai

Page 7

4



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Incorporation and implementation of Online Contents fro m
NPTEL/ Swayam Platform

The curriculum revision is mainly focused on knowledge component, skill based activities and project
based activities. Self learning opportunities are provided to learners. In the revision process this time in
particular Revised syllabus of ‘C ‘ scheme wherever possible additional resource links of pl atforms such
as NPTEL, Swayam are appropriately provided. In an earlier revision of curriculum in the year 2012 and
2016 in Revised scheme ‘A' and ‘B' respectively, efforts were made to use online contents more
appropriately as additional learning material s to enhance learning of students.
In the current revision based on the recommendation of AICTE model curriculum overall credits are
reduced to 171, to provide opportunity of self learning to learner. Learners are now getting sufficient time
for self learning either through online courses or additional projects for enhancing their knowledge and
skill sets.
The Principals/ HoD’s/ Faculties of all the institute are required to motivate and encourage learners to use
additional online resources available on p latforms such as NPTEL/ Swayam. Learners can be advised to
take up online courses, on successful completion they are required to submit certification for the same. This
will definitely help learners to facilitate their enhanced learning based on their inte rest.

Dr. S. K. Ukarande
Associate Dean
Faculty of Science and Technology
Member, Academic Council , RRC in Engineering
University of Mumbai

Page 8

5



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Preface By BoS
Engineering is an innovative field, the origin of ideas leading to everything from automobile to aerospace,
skyscrapers to sonar. Biomedical Engineering focuses on the advances that improve human health and
health care at all levels . Biomedical engineering is an interdisciplinary field with application of the
principles of Basic Sciences, Mathematics, Engineering fundamentals and Biology for problem -solving.
The curriculum is designed to meet the challenges by include new age courses on Machine Learning,
Artificial Intelligence , Data Analytics and other emerging technologies , dismantl ing the walls between
engineering and scientific disciplines. The key to generat e a new paradigm shift for careers in Biomedical
Engineering for the next generation of talented minds lies in imparting high-quality education in
Engineering .
Every course in the curriculum lists the course objectives and course outcomes for the learners to understand
the skills that the lea rner will acquire after completing that course. Program outcomes are the skills and
knowledge that a student will acquire during the course of four years of this engineering program. In line
with this , Faculty of Technology of University of Mumbai has tak en a lead in incorporating the philosophy
of outcome based education in the process of curriculum development.
As the Chairman, Board of Studies in Biomedical Engineering of the University of Mumbai, I am happy to
state here that, the Program Educational O bjectives for undergraduate program were thoughtfully framed
by faculty members from different affiliated institutes of the university. They are Heads of Departments
and senior representatives from the Department of Biomedical Engineering.
The Program Edu cational Objectives for the undergraduate program in Biomedical engineering are listed
below;
1. To prepare the learner with a sound foundation in the Human Physiology, Mathematic s, Electronics,
Computer Programming and engineering fundamentals .

2. To motivate the learner for self-learning , logical & analytical thinking and use of modern tools for solving
real life problems .

3. To impart technical knowledge, competency skills, professional and ethical attitude, good leadership
qualities to contribute i n the field of healthcare.

4. To prepare the Learner for a successful career in healthcare industry such as sales & marketing, research
& development, hospital administration and also to venture into higher education and entrepreneurship.


Board of Studies in Biomedical Engineering
Dr. Manali J. Godse : Chairman
Dr. Prem C . Pandey : Member
Dr. Mita Bhowmick : Member
Dr. Mrunal R. Rane : Member
Dr. Vaibhavi A. Sonetha : Member




Page 9

6



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Program Structure for Second Year Engineering
Semester III & I V
UNIVERSITY OF MUMBAI
(With Effect from 2020 -2021 )
Semester I II
Course
Code Course Name Teaching Scheme
(Contact Hours) Credits Assigned
Theory Pract. Tut. Theory Pract . Tut. Total
BMC301 Engineering
Mathematics - III 3 -- 1 3 -- 1 4
BMC302 Human Anatomy and
Physiology for Engineers 3 -- 3 -- 3
BMC303 Medical Sensors 3 -- -- 3 -- -- 3
BMC304 Electronic Circuits
Analysis and Design 4 -- -- 4 -- -- 4
BMC305 Digital Electronics 3 -- -- 3 -- -- 3
BML3 01 Human Anatomy and
Physiology for Engineers
Lab -- 2 -- -- 1 -- 1
BML3 02 Medical Sensors Lab -- 2 -- -- 1 -- 1
BML3 03 Electronic Circuits
Analysis and Design Lab -- 2 -- -- 1 -- 1
BML304 Electronics Lab ( SBL) -- 4 -- -- 2 -- 2
BMM301 Mini Project – 1 A -- 4$ -- -- 2 -- 2
Total 16 14 1 16 07 1 24
Course
Code Course Name Examination Scheme
Theory
Term
Work Pract/
oral Total Internal
Assessment End
Sem.
Exam Exam.
Duration
(in Hrs) Test
1 Test
2 Avg.
BMC301 Engineering
Mathematics - III 20 20 20 80 3 25 -- 125
BMC3 02 Human Anatomy and
Physiology for Engineers 20 20 20 80 3 -- -- 100
BMC303 Medical Sensors 20 20 20 80 3 -- -- 100
BMC304 Electronic Circuits
Analysis and Design 20 20 20 80 3 -- -- 100
BMC305 Digital Electronics 20 20 20 80 3 -- -- 100
BML3 01 Human Anatomy and
Physiology for Engineers
Lab -- -- -- -- -- 25 -- 25
BML3 02 Medical Sensors Lab -- -- -- -- -- 25 25 50
BML3 03 Electronic Circuits
Analysis and Design Lab -- -- -- -- -- 25 25 50
BML304 Electronics Lab (SBL) -- -- -- -- -- 25 25 50
BMM301 Mini Project – 1 A -- -- -- -- -- 25 -- 25
Total -- -- 100 400 -- 150 75 725
$ indicates wor k load of Learner (Not Faculty), for Mini Project - 1 A.

Page 10

7



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Faculty Load :1 hour per week per 4 mini project groups.
Program Structure for Second Year Engineering
UNIVERSITY OF MUMBAI
(With Effect from 2020 -2021)
Semester IV
Course
Code Course Name Teaching Scheme
(Contact Hours) Credits Assigned
Theor
y Pract. Tut. Theory Pract . Tut. Total
BMC401 Engineering
Mathematics - IV 3 -- 1 3 -- 1 4
BMC4 02 Integrated Circuit Design 3 -- -- 3 -- -- 3
BMC403 Principles of Control
Systems 3 -- -- 3 -- -- 3
BMC404 Medical Imaging – I 3 -- -- 3 -- -- 3
BMC405 Biomaterials and
Artificial Organs 3 -- -- 3 -- -- 3
BML4 01 Integrated Circuit Design
Lab -- 2 -- -- 1 -- 1
BML4 02 Principles of Control
Systems Lab -- 2 -- -- 1 -- 1
BML4 03 Medical Imaging – I Lab -- 2 -- -- 1 -- 1
BML404 Computing Lab (SBL) -- 4 -- -- 2 -- 2
BMM401 Mini Project – 1 B -- 4$ -- -- 2 -- 2
Total 15 14 1 15 7 1 23
Course
Code Course Name Examination Scheme
Theory
Term
Work Pract/
oral Total Internal Assessment End
Sem.
Exam. Exam.
Duration
(in Hrs) Test
1 Test
2 Avg.
BMC401 Engineering
Mathematics - IV 20 20 20 80 3 25 -- 125
BMC4 02 Integrated Circuit Design 20 20 20 80 3 -- -- 100
BMC403 Principles of Control
Systems 20 20 20 80 3 -- -- 100
BMC404 Medical Imaging – I 20 20 20 80 3 -- -- 100
BMC405 Biomaterials and
Artificial Organs 20 20 20 80 3 -- -- 100
BML4 01 Integrated Circuit Design
Lab -- -- -- -- -- 25 25 50
BML4 02 Principles of Control
Systems Lab -- -- -- -- -- 25 -- 25
BML4 03 Medical Imaging – I Lab -- -- -- -- -- 25 25 50
BML404 Computing Lab (SBL) -- -- -- -- -- 25 25 50
BMM401 Mini Project – 1 B -- -- -- -- -- 25 25 50
Total -- -- 100 400 -- 150 100 750
$ indicates wor k load of Learner (Not Faculty), for Mini Project - 1 B.

Page 11

8



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Faculty Load :1 hour per week per 4 mini project groups.
Semester – III


Course
Code Teaching Scheme Credits Assigned

Course
Name (Contact Hours)



Theory Pract. Tut. Theory TW/Pract Tut. Total


BMC301 Engineering
Mathematics -III 03 - 01 03 - 01 04





Course
Code Course Name Examination Scheme

Theory
Term
Work Pract Oral Total
Internal Assessment
End
Sem
Exam



Test1
Test2 Avg of
Test 1
& 2










BMC301 Engineering
Mathematics -III 20 20 20 80 25 - - 125




Pre-requisite: Engineering Mathematics -I, Engineering Mathematics -II, Scalar and Vector Product:
Scalar and Vector product of three and four vectors.

Course Code Course Name Credits
BMC301 Engineering Mathematics - III 04
Course Objectives • To familiarize with the Laplace Transform, Inverse Laplace Transform
of various functions, and its applications.
• To acquaint with the concept of Fourier Series, its complex form and
enhance the problem solving skills
• To familiarize the concept of complex variables, C -R equations,
harmonic functions, its conjugate and mapping in complex plane.
• To understand the basics of Linear Algebra and its applications
• To use concepts of vector calculus to analyze and model engineering
problems.
Course Outcomes On successful completion of course learner will be able to :
• Apply the concept of Laplace transform to solve the real integrals in
engineering problems.
• Apply the concept of inverse Laplace transform of v arious functions in
engineering problems.
• Expand the periodic function by using Fourier series for real life
problems and complex engineering problems.
• Find orthogonal trajectories and analytic function by using basic
concepts of complex variables.
• Illustrate the use of matrix algebra to solve the engineering problems.
• Apply the concepts of vector calculus in real life problems.

Page 12

9



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Detailed Contents Hrs.
01 Module: Laplace Transform
1.1 Definition of Laplace transform, Condition of Existence of Laplace Transform.
1.2 Laplace Transform (L) of standard functions like 𝑒𝑎𝑡, 𝑠𝑖𝑛(𝑎𝑡), 𝑐𝑜𝑠(𝑎𝑡), 𝑠𝑖𝑛ℎ(𝑎𝑡),
𝑐𝑜𝑠ℎ(𝑎𝑡) and 𝑡𝑛,𝑛≥0.
1.3 Properties of Laplace Transform: Linearity, First Shifting Theorem, Second Shifting
Theorem, Change of Scale Property, Multiplication by t, Division by t, Laplace
Transform of derivatives and integrals (Properties without proof).
1.4 Evaluation of integrals by using Laplace Transformation.

Self-learning Topics: Heaviside’s Unit Step function, Laplace Transform of Periodic
functions, Dirac Delta Function. 7
02 Module: Inverse Laplace Transform
2.1 Inverse Laplace Transform, Linearity property, use of standard formulae to
find inverse Laplace Transform, finding Inverse Laplace Transform using
derivatives.
2.2 Partial fractions method to find inverse Laplace Transform.
2.3 Inverse L aplace Transform using Convolution theorem (without proof).

Self-learning Topics: Applications to solve initial and boundary value problems
involving ordinary differential equations. 6
03 Module: Fourier Series:
3.1 Dirichlet’s conditions, Definition of Fourier series and Parseval’s Identity
(without proof).
3.2 Fourier series of periodic function with period 2𝜋 and 2l.
3.3 Fourier series of even and odd functions.
3.4 Half range Sine and Cosine Series.

Self-learning Topics: Complex form of Fourier Series, Orthogonal and orthonormal set
of functions. Fourier Transform. 7
04 Module: Complex Variables:
4.1 Function f(z) of complex variable, limit, continuity and differentiability of
f(z)Analytic function, necessary and sufficient conditions for f(z) to be
analytic (without proof).
4.2 Cauchy -Riemann equations in cartesian coordinates (without proof).
4.3 Milne -Thomson method to determine analytic function f(z)when real part
(u) or Imaginary part (v) or its combination (u+v or u -v) is given.
4.4 Harmonic function, Harmonic conjugate and orthogonal trajectories.

Self-learning Topics: Conformal mapping, linear, bilinear mapping, cross ratio, fixed
points and standard transfor mations. 7
05 Module: Linear Algebra: Matrix Theory
5.1 Characteristic equation, Eigen values and Eigen vectors, Example based on
properties of Eigen values and Eigen vectors.(Without Proof).
5.2 Cayley -Hamilton theorem (Without proof), Examples based on verification of
Cayley - Hamilton theorem and compute inverse of Matrix.
5.3 Similarity of matrices, Diagonalization of matrices, Functions of square matrix.

Self-learning Topics: Appli cation of Matrix Theory in machine learning and google page
rank algorithms, derogatory and non -derogatory matrices . 6
06 Module: Vector Differentiation and Integra l
6.1 Vector differentiation : Basics of Gradient, Divergence and Curl (Without 6

Page 13

10



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Proof).
6.2 Properties of vector field: Solenoidal and Irrotational (conservative) vector
fields.
6.3 Vector integral: Line Integral, Green’s theorem in a plane (Without Proof),
Stokes’ theorem (Without Proof) only evaluation.

Self-learning Topics: Gauss’ divergence Theorem and applications of Vector calculus.


Term Work:
General Instructions:
1. Students must be encouraged to write at least 6 class tutorials on entire syllabus.
2. A group of 4 -6 students should be assigned a self -learning topic. Students should prepare a
presentation/problem solving of 10 -15 minutes. This should be considered as mini project in
Engineering mathematics. This project should be graded for 10 marks depending on the performance
of the students.

The distribution of marks for term work shall be as follows:
Class Tutorials on entire syllabus : 10 Marks
Mini project : 10 Marks
Attendance (Theory and Tutorial) : 5 Marks
Assessment :

Internal Assessment Test:
Assessment consists of two class tests of 20 marks each. The first -class test (Internal Assessment I) is
to be conducted when approximately 40% syllabus is completed and second class test (Internal
Assessment II) when additional 35% syllabus is completed. Duration of each test shall be one hour.

End Semester Theory Examination:
1. Question paper will comprise of tot al 06 questions, each carrying 20 marks.
2. Total 04 questions need to be solved.
3. Question No: 01 will be compulsory and based on entire syllabus wherein 4 sub -questions of 5 marks
each will be asked.
4. Remaining questions will be randomly selected from all the modules.
5. Weightage of each module will be proportional to number of respective lecture hours as mentioned in
the syllabus.
References: -
1. Advanced engineering mathematics, H.K. Das, S.Chand, Publications
2. Higher Engineering Mathematics, B. V. Ramana, Tata Mc -Graw Hill Publication
3. Advanced Engineering Mathematics, R. K. Jain and S. R. K. Iyengar, Narosa publication
4. Advanced Engineering Mathematics, Wylie and Barret, Tata Mc -Graw Hill.
5. Theory and Problems of Fourier Analysis with applications to BVP, Murray Spiegel, Schaum’s
Outline Series
6. Vector Analysis Murry R. Spiegel, Schaum’s outline series, Mc -Graw Hill Publication
7. Beginning Linear Algebra, Seymour Lipschutz, Schaum’s outline series, Mc -Graw Hill Publication
8. Higher Engineering Mathematics, Dr. B. S. Grewal, Khanna Publication

Page 14

11



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BMC302 Human Anatomy
and Physiology for
Engineers
(Abbreviated as
HAPE) Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03

Course
Code Course
Name Examination Scheme
Theory
Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Dura
tion
(hrs) Test 1 Test 2 Avg.
BMC302 Human
Anatomy
and
Physiology
for
Engineers
(Abbreviat
ed as
HAPE) 20 20 20 80 03 -- -- -- -- 100

Course Code Course Name Credits
BMC302 Human Anatomy and Physiology for Engineers 03
Course Objectives • To understand the anatomical structures of the human body and their
relationship to each other.
• To understand the different physiological processes taking place inside the
human body.
Course Outcomes Learners will be able to:
• Explain the organization of the human body, homeostasis and its maintenance,
structure and functions of a cell and basic tissues.
• Explain the components of blood and their functions.
• Explain the anatomical parts and physiological processes of the cardio vascular
system and respiratory system.
• Explain the anatomical parts and physiological processes of the alimentary
system and renal system.
• Explain the structure and functions of nervous system, eye and skin along with
the secretions and functions of all endocrine glands.








Page 15

12



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1. Introduction to the Human Body: Levels of structural organization; Characteristics of
living human organism; Homeostasis and its maintenance.
Cells and Tissues : Structure and functions of a cell; Transport across the plasma membrane;
membrane potentials; Tissues: epithelial, connective, muscle and nervous. 04
2. Cardiovascular System : Anatomy of the heart; Heart valves, systemic and pulmonary
circulation; Conduction system of the heart; Card iac action potential, electrocardiogram
(ECG); Cardiac cycle; Cardiac output; Blood pressure.
Respiratory System: Anatomy of respiratory system ; Pulmonary ventilation, lung volumes
and capacities; Gas laws - Dalton’s law and Henry’s law, external respiration, internal
respiration. 10
3. Blood: Composition of Blood, blood cells and their functions, haemoglobin; Blood
Grouping; Haemostasis. 04
4. Alimentary System: Anatomy of the alimentary system; Secretions of different organs of
the alimentary system and their main functions.
Renal System: Anatomy of the renal system; Functions of kidney (urine formation,
electrolyte balance and pH balance); composition of urine; Micturition. 10
5. Nervous System: Divisions of the nervous system (central and peripheral nervous system);
Structure and functions of the brain and spinal cord; Reflex actions and reflex arc; Functions
of sympathetic and parasympathetic nervous system; Nerve action potential and nerve
conduction. 05
6. Special Senses: Structure of the eye; Physiology of vision; Structure and functions of the
skin.
Endocrine System: All Glands of the endocrine system, their secretions and functions. 06

Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Books Recommended:

Text books:
1. Anatomy and Physiology in Health and Illness: Ross and Wilson. (ELBS Publication)
2. Essentials of Anatomy and Physiology: Elaine N Marieb. (Pearson Education)

Reference Books:
1. Physiology of Human Body: Guyton. (Prism Book)
2. Review of Medical Physiology: William Ganong. (Prentice Hall Int.)
3. Principles of Anatomy and Physiology: Tortora and Grabowski. (Harper collin Pub.)
4. Anatomy and Physiology: Elaine N Marieb. (Pearson Education)

NPTEL /Swayam Course:
Course : Animal Physiology by Prof. Mainak Das - IIT Kanpur
https://nptel.ac.in/courses/102/104/102104058/
https://swayam.gov.in/nd1_noc20_bt42/preview

Theory Examination:
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.

Page 16

13



University of Mumbai, Biomedical Engineering, Rev 2020 -21 3. Q.1 will be compulsory, based on entire syllabus wherein subquestions of 2 to 5 marks will be asked.
4. Remaining question will be randomly selected from all the modules.

Page 17

14



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BMC303 Medical Sensors
(Abbreviated as
MS) Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03


Course Code Course Name Credits
BMC303 Medical Sensors 03
Course Objectives • To provide the knowledge of basic concepts such as generalized medical
instrumentation system, input transducer properties, and instrument characteristics.
• To provide a thorough understanding of principle and working of transducers and
sensors used for measuring displacement, motion, force, pressure, temperature, bio -
potentials, biochemical concentrations.
• To study the medical applications of the above transducers and sensors.
• To perform experiments based on some of the above transducers and sensors.
Course Outcomes The learner will be able to :
• Explain different components of a generalized medical instrumentation system,
input transducer properties, an d instrument characteristics.
• Apply the knowledge of principles of various types of transducers and sensors
including motion, displacement, force, pressure sensors to different medical
applications.
• Apply the knowledge of principles of various types of tem perature sensors to
different medical applications.
• Apply the knowledge of the various biopotential electrodes for measuring different
types of biopotentials.
• Apply the principles of various chemical sensors for measuring concentration of
biochemical analytes.
• Explain the principles of various biosensors and their medical applications.
Course
Code Course
Name Examination Scheme
Theory
Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Dur-
ation
(hrs) Test
1 Test
2 Avg.


BMC303
Medical
Sensors
(Abbreviat
ed as MS) 20 20 20 80 03 -- -- -- -- 100

Page 18

15



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1. Introduction : Generalized medical i nstrumentation system; General p roperties of
input transd ucers; Static characteristics: A ccuracy, precision, resolution,
reproducibility, sensitivity, drift, hysteresis, linearity, input impedance and output
impedance; Dynamic characteristics: Transfer functions, first order and second order
systems, time delay; Design criter ia. 04
2. Displacement, Motion, Force and Pressure Sensors and their Medical
Applications : Displacement measurement: Potentiometers, strain gauges, bridge
circuits, inductive sensor – L.V.D.T., capacitive sensors; Acceleration and force
measurement: Piezo electric sensor, load cell; Pressure sensing elements:
Diaphragms, bellows, bourdon tubes. 08
3. Temperature Sensors and their Medical Applications: Temperature measurement:
Thermistor, thermocouple, resistive temperature detector; IC -based temperature
measurement; Radiation sensors: Thermal sensors, quantum sensors, and radiation
thermometry. 06
4. Biopotential electrodes : Electrode -electrolyte interface, half -cell potential,
polarization, polarizable and non -polarizable electrodes, calomel electrode; Electrode
circuit model, electrode -skin interface and motion artefacts; Body surface electrodes;
Internal electrodes: Needle and wire electrodes (different types); Microelectrodes:
Metal and supported metal micropipette (meta l filled glass and glass micropipette)
electrodes. 06
5. Chemical Sensors and their Medical Applications: Blood gas and acid - base
physiology ; pH, Pco 2, Po2 electrodes; ISFETs ; Transcutaneous arterial O2 and CO 2
tension monitoring.
Fiber optic Sensors and their Medical Applications : Principle of fiber optics; Fiber
optic sensor types - Temperature, chemical, and pressure. 07
6. Biosensors : Types of biosensors - electrochemical biosensors, optical biosensors,
piezoelectric biosensors; Biorecogni tion elements and their immobilization
techniques; Medical applications of biosensors. 08

Books Recommended:
Text Books:
1. Medical Instrumentation -Application and Design, John G. Webster, Wiley India Private Limited.
2. Instrument Transducers: An Introduction to Their Performance and Design, Hermann K. P. Neubert,
Oxford University Press.
3. Biomedical Sensors: Fundamentals and Applications, Harry N. Norton, Noyes Publications.
4. Biomedical Transducers and Instruments, Tatsuo Togawa, Toshiyo Tamura and P. Ake Öberg, CRC
Press.
5. Electronics in Medicine and Biomedical Instrumentation by Nandini K. Jog, Prentice -Hall of India Pvt.
Limited.
6. Biosensors: Fundamentals and Applications, Ban si Dhar Malhotra and Chandra Mouli Pandey, Smithers
Rapra Technology.

Reference Books:
1. Principles of Applied Biomedical Instrumentation, L.A. Geddes and L.E. Baker, Wiley India Pvt Ltd.
2. Biomedical Instrumentation and Measurements, Leslie Cromwell, Erich A. Pfeiffer and Fred J. Wiebell,
Prentice -Hall of India Pvt. Ltd.

Page 19

16



University of Mumbai, Biomedical Engineering, Rev 2020 -21 3. Principles of Biomedical Instrumentation and Measurement, Richard Aston, Merril Publishing
Company.
4. Measurement Systems, Application and Design, Ernest O. Doeblin, McGraw Hill Higher Education .
5. Handbook of Modern Sensors – Physics, Design and Application, Jacob Fraden, Springer Publishing
Company .
6. Transducers for Biomedical Measurements: Principles and Applications, Richard S. C. Cobbold, John
Wiley & Sons.

NPTEL /Swayam Course:
Course : Industrial Instrumentation by Prof. Alok Barua - IIT Kharagpur
https://nptel.ac.in/courses/108/105/108105064/


Assessment:
Internal Assessment consists of two tests out of which, one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Theory Examination:
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.
3. Q.1 will be compulsory, based on the entire syllabus whe rein sub questions of 2 to 5 marks will be
asked.
4. Remaining question will be randomly selected from all the modules.

Page 20

17



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BMC304
Electronic circuit
analysis and
design
(Abbreviated as
ECAD) Theory Pract. Tut. Theory Pract. Tut. Total
04 -- -- 04 -- -- 04

Course
Code Course
Name Examination Scheme
Theory
Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Dura
tion
(hrs) Test 1 Test 2 Avg.


BMC304 Electronic
Circuit
Analysis
and Design
(ECAD) 20 20 20 80 03 -- -- -- -- 100


Course Code Course Name Credits
BMC304 Electronic Circuit Analysis and Design 04
Course Objectives • To understand transfer characteristics of semiconductor devices and to analyse
basic application circuits.
• To make learners aware about the mathematical models of BJT and its use in
analysing the circuits.
• To make the learners aware abou t different types of coupling and the concept of
multistage amplifiers.
• Learners will be able to design power amplifier.
• To learn types and applications of MOSFET.
Course Outcomes Learner will be able to:
• Explain the transfer characteristics in analysing the electronic circuits which use
diode, BJT etc.
• Explain equivalent circuits of BJT and apply them to analyse and design BJT
based amplifier circuits
• Apply the knowledge of mathematical model to analyse multistage amplifiers.
• Design and analyse power amplifiers.
• Apply the concept of transfer characteristics, D.C. load line, A.C. load line to
analyse MOSFET amplifiers.

Page 21

18



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1. Basics of Diodes : Construction, Working, Characteristics, Current Equation &
Equivalent circuits of P -N Junction Diode as well as Zener Diode; Applications of
Diode: Clipper & Clamper . 06
2. Basics & DC analysis of BJT : Construction; Working and Characteristics of 3
different configurations of BJT; Quiescent point, DC load line, BJT Biasing techniques
(Fixed, Self, Voltage Divider, Collector to base, Collector to base self) and BJT as a
switch. 10
3. BJT as an Amplifier : A.C. Equivalent Model: r e model, h -parameter model (Exact and
Approximate) and Hybrid -π model; A.C. Analysis (Using any one model): A.C. load
line, A.C. analysis of CE, CB, CC amplifier configurations, Effects of R S & R L, Low
frequency and High frequency analysis of Single stage amplifiers; Design of single
stage amplifier using BJT. 10
4. Multistage Amplifier: Need of cascading; Types of coupling; D.C. and A.C. analysis
of CS -CE casca de configuration, Casco de amplifier, Darlington amplifier . 08
5. Power Amplifiers: Classes of Power amplifiers; Class -A Power Amplifiers (Direct
coupled and Transformer coupled), Class -B Power Amplifiers, Crossover distortion,
Harmonic distortion, Class -AB Push Pull and Complementary Symmetry Power
amplifier, Class -C Power Amplifier, Class A and B/AB Power amplifier design, Heat
Sinks and its design. 08
6. MOSFET: Comparison of BJT & FET, Classification, Characteristics, Biasing of
MOSFET, MOSFET as an amplifier & MOSFET as a switch. 10

Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Books Recommended:
Textbooks:
1. Electronics C ircuit . Anal ysis & Design, 2nd ed., Donald A. Neamen, McGraw Hill, 2001
2. Electr onics Devices & Circuits Theory, by by Robert L. Boylestad and Louis Nashelsky, Pearson Education.
3. Semiconductor Data Manual, BPB Publications.

Reference Books:
1. Electronic Principles, by Albert Paul Malvin o 6th edition , McGraw Hill
2. Electronic Devices and Circuits, by Jacob Milliman McGraw Hill .
3. Electronic Design , by Martin Roden, Gordon L.Carpenter, William Wieseman, Fourth ed ition,
Shroff Publishers & Distributors Pvt. Ltd. .
4. Electronic Circuits Discrete and Integrated, by Donald Schilling & Charles Belove, Third edition,
McGraw Hill.


NPTEL /Swayam Course:
Course : Analog Electronic Circuits by Prof. Pradip Mandal - IIT Kharagpur
https://nptel.ac.in/courses/108/105/108105158/

Theory Examination:
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.
3. Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be asked.
4. Remaining question will be randomly selected from all the modules.

Page 22

19



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BMC305
Digital
Electronics
(Abbreviated as
DE) Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03



Course Code Course Name Credits
BMC305 Digital Electronics 03
Course Objectives • To make learner aware of basics of Digital circuits, logic design, various Logic
Families and Flip -flops.
• Learner should be able to design various counters, registers and know their
applications.
• Learner should be able to design sequential circuits as a state machine.
Course Outcomes Learner will be able to:
• Describe various number systems, logic gates and logic families.
• Apply Boolean algebra, K -maps for Logic reduction and implementations in SOP
and POS form
• Develop combinational circuits such as code converter circuits, parity generato r
checker circuits and magnitude comparator circuits. Also, circuits using
multiplexers, de -multiplexers, and decoders.
• Design synchronous sequential circuits and asynchronous counters using flip flops
• Design various registers using flip flops.













Course
Code Course
Name Examination Scheme
Theory
Term
work Pract Oral Pract.
/ Oral Total Internal Assessment End
sem Dura
tion
(hrs) Test 1 Test 2 Avg
BMC305
Digital
Electronics
(DE) 20 20 20 80 03 -- -- -- -- 100

Page 23

20



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1. Fundamentals of Digital Design:
Introduction: Number system: Binary, Octal, Hexadecimal and other. Conversion
from One system to another.
Binary Codes: Weighted, Reflective, Sequential, Gray, Error detecting codes, Odd,
Even parity, Hamming Codes etc.
Logic Gates and Families: AND, OR, NOT, XOR, XNOR, operation NAND, NOR
used of the universal gate for performing different operations. TTL and CMOS logic
families. 04
2. Combinational Logic Design:
Boolean Algebra : Laws of Boolean algebra, De - Morgan’s theorems, Relating a Truth
Table to a Boolean Expression, Multilevel circuits.
Logic Reduction Techniques : K-MAPS and their use in specifying Boolean
Expressions, Prime -implicant, Minterm, Maxterm, SOP and POS Implementation.
Implementation of logic function using universal gates.
Application of gray code, Hazards in combinational circuits. 08
3. MSI Combinational Circuits:
Elementary Designs: Designing code converter circuits e.g. Binary to Gray, BCD to
Seven Segments, Parity Generator and Parity Checker (3 bit).
Binary Arithmetic Circuits : Binary Addition, Binary Subtraction (ones and twos
complemen t), (Half & Full) Adders, (Half & Full) Subtractors, BCD adder, BCD -
Subtractor (9’s complement method), Serial adder, Multiplier, Magnitude
Comparators, 7485 comparator, Arithmetic Logic Units.
Use of Multiplexers in Logic Design: Multiplexer (ULM) Shanno n’s theorem . De-
Multiplexers, Line decoders. 11
4. Fundamentals of Sequential Logic Circuits:
Flip-Flops: Comparison of Combinational & Sequential Circuits, Flip -Flops, SR, T,
D, JK, Master Slave JK, Converting one Flip -Flop to another
Counters: Modulus of a counter, Designing of synchronous and asynchronous
counter using flip flop, Concept of drawing state transition diagram & state transition
table. Minimum cost and m inimum risk approach in design. 08
5. Sequential Circuit Designs: State machine analysis, State machine design as Mealy
and Moore machines , basic design of sequence detector. 04
6. Sequential Logic Designs:
Registers: Serial input serial output, serial input parallel output, Left Right shift
register, Bidirectional shift register, Universal shift register. Ring Counter, Twisted
Ring Counter, Sequence generator. 04

Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Books Recommended:
Text Books:
1. Modern Digital Electronics, by R.P.Jain Tata McGraw Hill, 1984
2. Digital Design,by M Morris Mono Prentice Hall International -1984.
3. Digital Principal and Applications , by Malvino& Leach, Tata McGraw Hill, 1991.
4. Digital Electronics , by Malvino, Tata McGraw Hill, 1997.
5. Digital Logic: Applications and Design, by John Yarbourugh Cengage Learning
6. Fundamentals of Digital Circuits, by A. Anand Kumar, Prentice -Hall of India Pvt.Ltd;
7. Digital Design: Principles & Practices , by John F. Wakerly , Prentice Hall

Page 24

21



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Reference Books:
1. Digital Electronics, by James Bignell & Robert Donovan, Delmar, Thomas Learning,
2. Logic Circuits, by Jog N.K, 2nd edition, Nandu Publisher & Printer Pvt .Ltd. 1998.
3. Introduction to Logic Design , by Alan b. Marcovitz McGraw Hill Internation al 2002.

NPTEL /Swayam Course:
Course : 1. Digital Circuits by Prof. Santanu Chattopadhyay - IIT Kharagpur
https://nptel.ac.in/courses/108/105/108105113/
https://swayam.gov.in/nd1_noc20_ee70/preview
Course : 2. Switching Circuits and Logic Design by Prof. Indranil Sengupta - IIT Kharagpur
https://nptel.ac.in/noc/courses/noc20/SEM2/noc20 -cs67/
https://swayam.gov.in/nd1_noc20_cs67/preview

Theory Examination :
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.
3. Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be asked.
4. Remaining question will be randomly selected from all the modules

Page 25

22



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching Scheme Credit Assigned
BML301 Human Anatomy
and Physiology for
Engineers
(HAPE) Theory Pract. Tut. Theory Pract. Tut. Total
-- 02 -- -- 01 -- 01

Course
Code Course Name Examination Scheme
Theory Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Test 1 Test 2 Avg.
BML301 Human
Anatomy and
Physiology for
Engineers
(HAPE) -- -- -- -- 25 -- -- -- 25

Course Code Course Name Credits
BML301 Human Anatomy and Physiology for Engineers 01
Course Objective • To understand the anatomical structures of the human body and their relationship
to each other.
• To gain the knowledge of measurement of various physiological parameters of
the human body.
Course Outcome The learner will be able to :
• Demonstrate measurement of blood pressure using occlusive cuff method.
• Apply blood cell counting principles for measuring blood composition.
• Demonstrate the measurement of electrical activity of heart and the related
parameters.
• Demonstrate the measurement of various lung volumes and capacities.
• Appropriately utilize laboratory equipment, such as microscopes, general lab
ware, and virtual simulations.
• Locate and identify anatomical structures.

Syllabus: Same as that of BMC302, Human Anatomy and Physiology for Engineers.

Page 26

23



University of Mumbai, Biomedical Engineering, Rev 2020 -21 List of Laboratory Experiments: (Any Seven)
1. To measure blood pressure using sphygmomanometer.
2. To find the total red blood cell count using pre -prepared slides.
3. To find the total white blood cell count using pre -prepared slides.
4. To study the conduction system of the heart.
5. To study the twelve lead electrode scheme and operation of the ECG Machine.
6. To record ECG and measure its various parameters (amplitude, intervals/segment).
7. To record lung volumes and capacities using a spirometer.
8. Visit to the anatomy department of a hospital to view specimens (cardiovascular & respiratory
systems).
9. Visit to the anatomy department of a hospital to view specimen (alimentary & renal systems).
10. Visit to the anatomy department of a hospital to view specimen (nervous system).
11. Present a case study on a given disease/abnormality that requires medical instruments for
diagnosis/treatment.
12. Present case a study on a given disease/abnormality that requires medical instruments for
diagnosis/treatment.
Any other experiment/visit to the hospital/case study based on sy llabus which will help learner to
understand a topic/concept.

Assessment:
Term Work:
Term work shall consist of minimum 7 experiments.
The distribution of marks for term work shall be as follows:
Laboratory work (Experiments) : 10 Marks
Laboratory work (Journal) : 10 Marks
Attendance : 05 Marks
The final certification and acceptance of term work e nsures the satisfactory performance of laboratory work
and minimum passing in the term work.
Books Recommended:
Text books:
1. Anatomy and Physiology in Health and Illness: Ross and Wilson. (ELBS Pub.)
2. Essentials of Anatomy and Physiology: Elaine N Marieb. (Pearson Education)
Reference Books:
1. Physiology of Human Body: Guyton. (Prism Book )
2. Review of Medical Physiology: William Ganong. (Prentice Hall Int.)
3. Principles of Anatomy and Physiology: Tortora and Grabowski. (Harper Collin Pub.)
4. Anatomy and Physiology: Elaine N Marieb. (Pearson Education)

NPTEL /Swayam Course:
Course : Animal Physiology by Prof. Mainak Das - IIT Kanpur
https://nptel.ac.in/courses/102/104/102104058/
https://swayam.gov.in/nd1_noc20_bt42/preview

Page 27

24



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching Scheme Credits Assigned

BML302 Medical
Sensors
(Abbreviated
as MS) Theory Pract. Tut. Theory Pract. Tut. Total

--
02
--
--
01
--
01



Course
Code

Course Name Examination Scheme
Theory
Internal Assessment End
Sem Term
work Pract. Oral Pract.
/ Oral Total
Test
1 Test
2 Avg.

BML302 Medical
Sensors
(Abbreviated
as MS)
--
--
--
--
25
--
25
--
50

Course Code Course Name Credits
BML302 Medical Sensors 01
Course Objectives • To analyse the transient response of a first -order system.
• To measure displacement using various displacement sensors.
• To measure pressure using a pressure sensor.
• To measure force using a force sensor.
• To measure temperature using various temperature sensors.
• To measure pH of a solution using a pH electrode.
Course Outcomes The learner will be able to:
• Analyse step response of a first -order system.
• Demonstrate the measurement of displacement using various displacement
sensors.
• Demonstrate the measurement of force and pressure using a force sensor and a
pressure sensor respectively.
• Demonstrate the measurement of temperature using various temperature
sensors.
• Distinguish various biopotential electrodes.
• Demonstrate the measurement of pH of a solution using a pH electrode.

Syllabus: Same as that of BMC303 Medical Sensors.

Page 28

25



University of Mumbai, Biomedical Engineering, Rev 2020 -21 List of Laboratory Experiments: (Any seven)
1. To study the transient response of a first -order system.
2. To study the resistance versus temperature characteristics of a thermistor.
3. To study the thermistor linearization technique.
4. To study the characteristics of a light dependent resister.
5. To study the principle and working of a thermocouple.
6. To study principle and working of L.V.D.T.
7. To study principle and working of a capacitive sensor.
8. To study principle and working of a strain gage sensor.
9. To study principle and working of a p ressure sensor.
10. To study the principle and working of a force sensor.
11. To study the various biopotential electrodes.
12. To study the pH electrode.

Any other experiment/student presentation based on the syllabus which will help the learner to understand
a topi c/concept.

Books Recommended:

Text Books:
1. Medical Instrumentation -Application and Design, John G. Webster, Wiley India Private Limited.
2. Instrument Transducers: An Introduction to Their Performance and Design, Hermann K. P. Neubert,
Oxford University Press.
3. Biomedical Sensors: Fundamentals and Applications, Harry N. Norton, Noyes Publications.
4. Biomedical Transducers and Instruments, Tatsuo Togawa, Toshiyo Tamura and P. Ake Öberg, CRC
Press.
5. Electronics in Medic ine and Biomedical Instrumentation by Nandini K. Jog, Prentice -Hall of India Pvt.
Limited.
6. Biosensors: Fundamentals and Applications, Bansi Dhar Malhotra and Chandra Mouli Pandey, Smithers
Rapra Technology.
Reference Books:
1. Principles of Applied Biomedical Instrumentation, L.A. Geddes and L.E. Baker, Wiley India Pvt Ltd.
2. Biomedical Instrumentation and Measurements, Leslie Cromwell, Erich A. Pfeiffer and Fred J. Wiebell,
Prentice -Hall of India Pvt. Ltd.
3. Principles of Biomedica l Instrumentation and Measurement, Richard Aston, Merril Publishing
Company.
4. Measurement Systems, Application and Design, Ernest O. Doeblin, McGraw Hill Higher Education .
5. Handbook of Modern Sensors – Physics, Design and Application, Jacob Fraden, Springer Publishing
Company .
6. Transducers for Biomedical Measurements: Principles and Applications, Richard S. C. Cobbold, John
Wiley & Sons.

NPTEL /Swayam Course:
Course : Industrial Instrumentation by Prof. Alok Barua - IIT Kharagpur
https://nptel.ac.in/courses/108/105/108105064/




Page 29

26



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Assessment :

Term Work:
Term work shall consist of minimum 7 experiments.
The distribution of marks for term work shall be as follows:
Laboratory work (Experiments) : 10 Marks
Laboratory work (Journal) : 10 Marks
Attendance : 5 Marks
The final certification and acceptance of term work ensures the satisfactory performance of laboratory work
and minimum passing in the term work.
Oral examination will be based on suggested practical list and entire syllabus.

Page 30

27



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BML303 Electronic Circuit
Analysis and
Design Lab
(ECAD Lab) Theory Pract. Tut. Theory Pract. Tut. Total
-- 02 -- -- 01 -- 01

Course
Code Course Name Examination Scheme
Theory Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Test 1 Test 2 Avg.
BML303 Electronic
Circuit Analysis
and Design Lab
(ECAD Lab) -- -- -- -- 25 -- -- 25 50

Course Code Course Name Credits
BML303 Electronic Circuit Analysis and Design Lab 01
Course Objective • To practically verify characteristics of different electronic components like
diodes, BJT, MOSFET etc
• To practically verify outputs of few applications of diodes, BJT, MOSFET.
• To design and implement small signal amplifier.
Course Outcome Learner will be able to:
• Explain the transfer characteristics of basic semiconductor devices.
• Design and verify the outputs of various electronic circuits such as clipper,
clampers etc using bread boards and various lab equipments.
• Design amplifier circuits and plot its frequency response.

Syllabus: Same as that of BMC304 Electronic Circuit Analysis and Design.

List of Laboratory Experiments: (Any Eight)
1. To verify semiconductor diode and Zener diode characteristics.
2. To implement various clipper circuits and verify output.
3. To implement various clamper circuits and verify output.
4. To study line regulation and load regulation of voltage regulator using Zener diode.
5. To verify input and output characteristics of BJT.
6. To implement a switch using BJT.
7. To implementation different biasing circuit of BJT
8. To design and implement CE a mplifier.
9. To study frequency response of CE amplifier.
10. To verify input and output characteristics of MOSFET.
11. To implementation different biasing circuit of MOSFET
12. To Study frequency response of an MOSFET amplifier.
Any other experiment based on syllabus c an be included in the term work which will help learner to
understand topic/concept.


Page 31

28



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Assessment:
Term Work:
Term work shall consist of minimum 8 experiments.
The distribution of marks for term work shall be as follows:
Laboratory work (Experiments) : 10 Marks
Laboratory work (Journal) : 10 Marks
Attendance : 5 Marks
The final certification and acceptance of term work ensures the satisfactory performance of laboratory work
and minimum passing in the term work.
Books Recommended:
Textbooks:
1. Electronics C ircuit . Anal ysis & Design, 2nd ed., Donald A. Neamen, McGraw Hill, 2001
2. Electr onics Devices & Circuits Theory, by by Robert L. Boylestad and Louis Nashelsky, Pearson Education.
3. Semiconductor Data Manual, BPB Publications.

Reference Books:
1. Electronic Principles, by Albert Paul Malvin o 6th edition , McGraw Hill
2. Electronic Devices and Circuits, by Jacob Milliman McGraw Hill .
3. Electronic Design , by Martin Roden, Gordon L.Carpenter, William Wieseman , Fourth ed ition,
Shroff Publishers & Distributors Pvt. Ltd. .
4. Electronic Circuits Discrete and Integrated, by Donald Schilling & Charles Belove, Third edition,
McGraw Hill.


NPTEL /Swayam Course:
Course : Analog Electronic Circuits by Prof. Pradip Mandal - IIT Kharagpur
https://nptel.ac.in/courses/108/105/108105158/

Practical exam consists of performance of any one practical from the conducted experiments within
the semester and oral based on entire syllabus.





Page 32

29



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BML304 Electronics Lab
(Skill Based Lab) Theory Pract. Tut. Theory Pract. Tut. Total
-- 04 -- -- 02 -- 02

Course
Code Course Name Examination Scheme
Theory Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Test 1 Test 2 Avg.
BML304 Electronics Lab
(Skill Based Lab) -- -- -- -- 25 -- -- 25 50

Course Code Course Name Credits
BML304 Electronics Lab (Skill Based Lab) 02
Course Objective • To design and implement voltage regulator circuits.
• To design and implement digital circuits.
• To learn skills of soldering.
• To learn simulation of circuits using one of the simulation software.
Course Outcome Learner will be able to:
• Design and implement analog and digital electronic circuits on bread board and
verify the outputs.
• Learn one of the tools for simulating different circuits.
• Know the limitations of ideal environment of simulations and also importance of
simulation in desig ning the circuits.
• Learn soldering skills for implementing the circuits on PCB.

List of experiments from Analog electronics:
Skill 1 -Soldering the components on PCB (Any 4)
1. Implement diode as full -wave rectifier using centre tap transformer.
2. Implement diode as full -wave rectifier using bridge circuit.
3. Use of Filter components with rectifier circuit.
4. Implement voltage regulators using IC 79XXand/or IC 78XX
5. Implement voltage regulators using IC 317/IC 723
6. Implement of logic gates us ing diodes.
Skill 2 -Simulations using simulation software like Multisim, Pspice etc (Any 4)
1. Simulate CASCODE amplifier.
2. Simulate Darlington amplifier.
3. Simulate power Amplifier
4. Simulate DIAC for transfer characteristics.
5. Simulate TRIAC for transfer characteristics.
6. Simulate UJT for transfer characteristics.
List of experiments from Digital Electronics (Perform using Breadboard or Logisim S/W etc):
(Any 8)
1. A step in space vehicle checkout depends on FOUR sensors S1, S2, S3 and S4. Every circuit is w orking
properly if sensor S1 and at least two of the other three sensors are at logic 1. Implement the system using
NAND gates only, the output is connected to a red LED which must glow if the circuit is not working properly
and the output is connected to a green LED which must glow if the circuit is working properly.
2. To design binary to gray code converter and gray to binary converter.

Page 33

30



University of Mumbai, Biomedical Engineering, Rev 2020 -21 3. To design parity generator and parity checker circuits.
4. To design adder and subtractor circuits.
5. To design various circu its using multiplexers.
6. To design various circuits using de -multiplexer.
7. To design Asynchronous counter.
8. To design decade counter
9. To design Synchronous counter.
10. To implement shift register and ring counter using MSI shift register.
11. To implement Moore/ Meal y machine.
12. A given finite state machine has an input W and output Z. During four consecutive clock pulses a sequence
of four values of W signal is applied. Design a machine that produces Z = 1 when it detects either of sequence
W: 0010 or W: 1110 otherwis e Z=0. After the fourth clock pulse the machine has to be again in the reset
state ready for next sequence.
Any other experiment based on syllabus can be included in the term work which will help learner to understand
topic/concept.

Assessment:
Term Work:
Term work shall consist of minimum 8 experiments from Analog electronics and 8 experiments from digital
electronics.
The distribution of marks for term work shall be as follows:
Laboratory work (Lab work and journal):10 Marks
Soldering skills :05 Marks
Simulation skills :05 marks
Attendance :05 Marks
The final certification and acceptance of term work ensures the satisfactory performance of laboratory work
and minimum passing in the term work.
Books Recommended:
Text Books:
1. Op-Amps and linear integrated circuits – Ramakant Gayakwad , Prentice Hall
2. Electronics Devices & Circuits, by Boylestad Robert L., Louis Nashelsky, Pearson Education.
3. Modern Digital Electronics, by R.P.Jain, Tata McGraw Hill, 1984
4. Digital Design, M Morris Mono, Prentice Hall International -1984.
Reference Books:
1. Electronic Principles, by Albert Paul Malvino, 6/e, McGraw Hill
2. Semiconductor Data Manual, BPB Publications.
3. Electronic design, by Martin Roden, Gordon L. C arpenter, William Wieseman Fourth ed ition,
Shroff Publishers &Distributors Pvt. Ltd.
4. Digital Design, by M Morris Mono Prentice Hall International 1984


Practical exam consists of performance of any one practical from digital electronics experiments
conducted within the semester and oral based on digital electronics syllabus.

Page 34

31



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course code Course Name Credits
BMM301 Mini Project - 1 A 02

Course Code Course Name Credits
BMM301 Mini Project – 1 A 02
Course Objective • To acquaint with the process of identifying the needs and converting it into the
problem .
• To familiarize the process of solving the problem in a group .
• To acquaint with the process of applying basic engineering fundamental s to
attempt solutions to the problems.
• To inculcate the process of self -learning and research.
Course Outcome Learner will be able to:
• Identify problems based on societal /research needs.
• Apply Knowledge and skill to solve societal problems in a group.
• Develop interpersonal skills to work as member of a group or leader.
• Draw the proper inferences from available results through theoretical /
experimental/simulations .
• Analyse the impact of solutions in societal and environmental context for
sustainable de velopment.
• Use standard norms of engineering practices
• Excel in written and oral communication.
• Demonstrate capabilities of self -learning in a group, which leads to life long
learning.
• Demonstrate project management principles during project work.

Guidelines for Mini Project
• Students shall form a group of 3 to 4 students, while forming a group shall not be allowed less than
three or more than four students, as it is a group activity.
• Students should do survey and identify needs, which shall be conv erted into problem statement for
mini project in consultation with faculty supervisor/head of department/internal committee of
faculties.
• Students hall submit implementation plan in the form of Gantt/PERT/CPM chart, which will cover
weekly activity of mini project.
• A log book to be prepared by each group, wherein group can record weekly work progress,
guide/supervisor can verify and record notes/comments.
• Faculty supervisor may give inputs to students during mini project activity; however, focus shall be
on self -learning.
• Students in a group shall understand problem effectively, propose multiple solution and select best
possible solution in consultation with guide/ supervisor.
• Students sh all convert the best solution into working model using various c omponents of their
domain areas and demonstrate.

Page 35

32



University of Mumbai, Biomedical Engineering, Rev 2020 -21 • The solution to be validated with proper justification and report to be compiled in standard format
of University of Mumbai .
• With the focus on the self -learning, innovation, addressing societal problems an d entrepreneurship
quality development within the students through the Mini Projects, it is preferable that a single
project of appropriate level and quality to be carried out in two semesters by all the groups of the
students. i.e. Mini Project 1 in semes ter III and IV. Similarly, Mini Project 2 in semesters V and VI.
• However, based on the individual students or group capability, with the mentor’s recommendations,
if the proposed Mini Project adhering to the qualitative aspects mentioned above gets comple ted in
odd semester, then that group can be allowed to work on the extension of the Mini Project with
suitable improvements/modifications or a completely new project idea in even semester. This policy
can be adopted on case by case basis.
Guidelines for As sessment of Mini Project :
Term Work
• The review/ progress monitoring committee shall be constituted by head of departments of
each institute. The progress of mini project to be evaluated on continuous basis, minimum two
reviews in each semester.
• In continuous assessment focus shall also be on each individual student, assessment based on
individual’s contribution in group activity, their understanding and response to questions.
• Distribution of Term work marks for both semesters shall be as below;
o Mark s awarded by guide/supervisor based on log book : 10
o Marks awarded by review committee : 10
o Quality of Project report : 05
Review/progress monitoring committee may consider following points for
assessment based on either one year or half year pro ject as mentioned in general
guidelines.
One-year project:
• In first semester entire theoretical solution shall be ready, including components/system
selection and cost analysis. Two reviews will be conducted based on presentation given by
students group.
▪ First shall be for finalisation of problem
▪ Second shall be on finalisation of proposed solution of problem.
• In second semester expected work shall be procurement of component’s/systems, building of
working prototype, testing and validation of results bas ed on work completed in an earlier
semester.
▪ First review is based on readiness of building working prototype to be conducted.
▪ Second review shall be based on poster presentation cum demonstration of working
model in last month of the said semester.

Half -year project:
• In this case in one semester students’ group shall complete project in all aspects including,
o Identification of need/problem
o Proposed final solution
o Procurement of components/systems

Page 36

33



University of Mumbai, Biomedical Engineering, Rev 2020 -21 o Building prototype and testing
• Two reviews will be con ducted for continuous assessment,
▪ First shall be for finalisation of problem and proposed solution
▪ Second shall be for implementation and testing of solution.

Assessment criteria of Mini Project.

Mini Project shall be assessed based on following criteria;
1. Quality of survey/ need identification
2. Clarity of Problem definition based on need.
3. Innovativeness in solutions
4. Feasibility of proposed problem solutions and selection of best solution
5. Cost effectiveness
6. Societal impact
7. Innovativeness
8. Cost effectiveness and Societal impact
9. Full functioning of working model as per stated requirements
10. Effective use of skill sets
11. Effective use of standard engineering norms
12. Contribution of an individual’s as member or leader
13. Clarity in written and oral communication

• In one year, project , first semester evaluation may be based on first six criteria’s and remaining
may be used for second semester evaluation of performance of students in mini project .
• In cas e of half year project all criteria’s in generic may be considered for evaluation of performance
of students in mini project.
Guidelines for Assessment of Mini Project Practical/Oral Examination:
• Report should be prepared as per the guidelines issued by the University of Mumbai.
• Mini Project sh all be assessed through a presentation and demonstration of working model by the
student project group to a panel of Internal and External Examiners prefera bly from industry or
research organizations having experience of more than five years approved by head of Institution.
• Students shall be motivated to publish a paper based on the work in Conferences/students
competitions.
Mini Project shall be assessed based on following points;
1. Quality of problem and Clarity
2. Innovativeness in solutions
3. Cost effectiveness and Societal impact
4. Full functioning of working model as per stated requirements
5. Effective use of skill sets
6. Effective use of standard engine ering norms
7. Contribution of an individual’s as member or leader
8. Clarity in written and oral communicate

Page 37

34



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Seme ster - IV

Course
Code Course Name Teaching Scheme
(Contact Hours) Credits Assigned
Theory Pract. Tut. Theory TW/Pract. Tut. Total
BMC401 Engineering
Mathematics -IV 03 - 01 03 - 01 04

Course
Code Course Name Examination Scheme
Theory
Term
Work Pract. Oral Total Internal Assessment End
Sem
Exam Test 1 Test 2 Avg of
Test 1 &
2
BMC401 Engineering
Mathematics -IV 20 20 20 80 25 - - 125

Pre-requisite: Engineering Mathematics -I, Engineering Mathematics -II,
Engineering Mathematics -III, Binomial Distribution.

Course Code Course Name Credits
BMC 401 Engineering Mathematics – IV 04
Course Objectives • To study the line and contour integrals and expansion of complex valued
function in a power series.
• To understand the basic techniques of statistics for data analysis,
Machine learning and AI.
• To study the probability distributions and expectations.
• To acquaint with the concepts of vector spaces used in the field of
machine learning and engineering problems.
• To familiarize with the concepts of Quadratic forms and Singular value
decomposition.
• To learn the concepts of Calculus of Variations.
Course Outcomes On successful completion of course, learner will be able to:
• Use the concepts of Complex Integration for evaluating integrals,
computing residues & evaluate various contour integrals.
• Demonstrate the use of Correlation and Regression to t he engineering
problems in data science, machine learning and AI.
• Illustrate understanding of the concepts of probability and expectation for
getting the spread of the data and distribution of probabilities.
• Apply the concept of vector spaces and orthogo nalization process in
Engineering Problems.
• Use the concept of Quadratic forms and Singular value decomposition in
various Engineering applications.
• Find the extremals of the functional using the concept of Calculus of
variation.

Page 38

35



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Module Detailed Contents Hrs.
01 Module: Complex Integration
1.1 Line Integral, Cauchy’s Integral theorem for simple connected and multiply
connected regions (without proof), Cauchy’s Integral formula (without proof).
1.2 Taylor’s and Laurent’s series (without proof).
1.3 Definition of Singularity, Zeroes, poles of f(z), Residues, Cauchy’s Residue
Theorem (without proof).
Self-learning Topics: Application of Residue Theorem to evaluate real
integrations ,Z - Transform.




7
02 Module: Statistical Techniques
2.1 Karl Pearson’s Coefficient of correlation (r) .
2.2 Spearman’s Rank correlation coefficient (R) (repeated and non -repeated ranks)
2.3 Lines of regression.
2.4 Fitting of first and second degree curves.
Self-learning Topics: Covariance, fitting of exponential curve.

6
03 Module: Probability Distributions
2.1 Baye’s Theorem, Random variable: Probability distribution for discrete and
continuous random variables, Density function and distribution function.
3.2 Expectation, mean and variance.
3.3 Probability distribution: Poisson & normal distribution.
Self-learning Topics: Moments, Moment Generating Function, Applications of
Probability Distributions in Engineering.



7
04 Module: Linear Algebra: Vector Spaces: -
4.1 Vectors in n -dimensional vector space, norm, dot product, The CauchySchwarz
inequality (with proof), Unit vector.
4.2 Orthogonal projection, Orthonormal basis, Gram -Schmidt process for vectors.
4.3 Vector spaces over real field, subspaces.

Self-Learning Topics :- Linear combinations, linear Dependence and
Independence, QR decomposition.



6
05 Module: Linear Algebra: Quadratic Forms
5.1 Quadratic forms over real field, Linear Transformation of Quadratic form,
Reduction of Quadratic form to diagonal form using congruent transformation.
5.2 Rank, Index and Signature of quadratic form, Sylvester’s law of inertia, Value -
class of a qua dratic form -Definite, Semidefinite and Indefinite.
5.3 Reduction of Quadratic form to a canonical form using congruent
transformations.
5.4 Singular Value Decomposition.
Self-learning Topics: Orthogonal Transformations , Applications of Quadratic
forms an d SVD in Engineering.



7
06 Module: Calculus of Variations:
6.1 Euler - Lagrange equation (Without Proof), When F does not contain y, When F
does not contain x, When F contains x, y, y’.
6.2 Isoperimetric problems - Lagrange Method.
6.3 Functions involving higher order derivatives: Rayleigh -Ritz Method.

Self-Learning Topics: - Brachistochrone Problem, Variational Problem, Hamilton
Principle, Principle of Least a ction , Several dependent variables.



6

Page 39

36



University of Mumbai, Biomedical Engineering, Rev 2020 -21

Term Work:

General Instructions:
1. Batch wise tutorials are to be conducted. The number of students per batch should be as
per University pattern for practicals.
2. Students must be encouraged to write at least 6 class tutorials on entire syllabus.
3. A group of 4 -6 students should be assigned a self -learning topic. Students should prepare a
presentation/problem solving of 10 -15 minutes. This should be considered as mini project in
Engineering mathema tics. This project should be graded for 10 marks depending on the
performance of the students.

The distribution of marks for term work shall be as follows:
Class Tutorials on entire syllabus : 10 Marks
Mini project : 10 Marks
Attendance (Theory and Tutorial) : 5 Marks
Assessment :

Internal Assessment Test:
Assessment consists of two class tests of 20 marks each. The first -class test (Internal Assessment I) is
to be conducted when approx. 40% syllabus is completed and second class test (Internal Assessment II)
when additional 35% syllabus is completed. Duration of each test shall be one hour.

End Semester Theory Examination:
1. Question paper will comprise of total 06 questions, each carrying 20 marks.
2. Total 04 questions need to be solved.
3. Question No: 01 will be compulsory and based on entire syllabus wherein 4 sub -questions of
5 marks each will be asked.
4. Remaining questions will be randomly selected from all the modules.
5. Weightage of each module will be proportional to number of respective lecture hours as
mentioned in the syllabus.

References:

1. Complex Variables and Applications, Brown and Churchill, McGraw -Hill education.
2. Probability, Statistics and Rand om Processes, T. Veerarajan, McGraw -Hill education.
3. Advanced engineering mathematics H.K. Das, S . Chand, Publications.
4. Higher Engineering Mathematics B. V. Ramana, Tata Mc -Graw Hill Publication
5. Advanced Engineering Mathematics, R. K. Jain and S. R. K. Iyengar, Narosa publication
6. Advanced Engineering Mathematics Wylie and Barret, Tata Mc -Graw Hill.
7. Beginning Linear Algebra Seymour Lipschutz Schaum’s outline series, Mc -Graw Hill Public ation
8. Higher Engineering Mathematics, Dr. B. S. Grewal, Khanna Publication

Page 40

37



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BMC402
Integrated
Circuit Design
(Abbreviated as
ICD) Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03



Course Code Course Name Credits
BMC402 Integrated Circuit Design 03
Course Objectives • To provide concepts of operational amplifier (Op -Amp) with their applications and
design methodology.
• To cover analysis of circuits using various ICs.
• To design and develop various circuits for biomedical applications and to develop
analytical thinking of students .
Course Outcomes Learner will be able to:
• Demonstrate basics of operational amplifiers.
• Analyse different types of Op-Amp based circuits.
• Analyse and design operational amplifier to perform mathematical operations.
• Design operational amplifier based oscillators.
• Learn various waveform generation ICs and their applications to use effectively in
projects .
• Apply the knowl edge of various special function ICs and special purpose diodes for
designing practical applications.

Course
Code Course
Name Examination Scheme
Theory
Term
work Pract Oral Pract.
/ Oral Total Internal Assessment End
sem Dura
tion
(hrs) Test 1 Test 2 Avg.
BMC402 Integrated
Circuit
Design
(Abbreviate
d as ICD) 20 20 20 80 03 -- -- -- -- 100

Page 41

38



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1. Introduction to Operational Amplifier (Op -Amp): Introduction to Differential
Amplifier; Introduction to an Ideal Operational Amplifier, Block Diagram, DC & AC
Characteristics and Equivalent circuit of Op -amp; Op -amp IC 741 characteristics,
frequency response and concept of virtual ground. 05
2. Linear Application of Op -Amp: Adder, Subtractor /differential Amplifier, Voltage
follower, Integrator (Ideal and practical), Differentiator (Ideal and practical),
Instrumentation amplifier and Instrumentation amplifier IC (AD620); Voltage to
Current and Current to Voltage converters. 05
3. Non-Linear Applications of operational Amplifier: Voltage comparators, zero
crossing detector and Schmitt Trigger (Regenerative comparator); Active Half wave
rectifiers, Active Full wave rectifier, Clipper, Clampers, Log and Antilog amplifiers,
Sample & hold circuits, Peak detector, Peak to Peak detector and Generalized
Impedance Convertor; Introduction to additional Op -Amp ICs and their features:
CA3140E, TL081CN, TL061CP, TL071CP, MC33171N , TL 0xx, MCP601 and
OPA602. 10
4. Oscillators using Operational Amplifier: Concepts of feedback, types of feedback
and various topologies of negative feedback; Concepts of Oscillation and Barkhausen’s
criteria for an oscillator; Types of oscillators: RC Phase shift Oscillator, Wien Bridge
oscillator, Colpitt’s Oscillator, Hartley Oscillator, Crystal Oscillator and Clapp
Oscillator (For all the above oscillators; working, Frequency of oscillation, condition
for sustained oscillation and design of each oscillator). 09
5. Special Function ICs - 1: IC 555 Functional Block diagram and Circuit diagram; IC
555 in Astable Multivibrator(AMV) functional diagram, circuit diagram with
applications; IC 555 in Monostable Multivibrator (MMV) functional diagram, ci rcuit
diagram with applications. 05
6. Special Function ICs – 2: Function Generator (IC 8038 or equivalent) Circuit diagram
and its applications; VCO (IC 566) Circuit diagram and applications; F -V convertors
and V -F convertors; Circu it diagram and its applications; Introduction to PLL 05

Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Books Recommended:
Textbooks:
1. Integrated Circuits K.R. Botkar
2. Design with Operational Amplifiers and Analog Integrated Circuits, by Sergio Franco, McGraw Hill, 2002
3. Op -Amps and linear integrated circuits by Ramakant . Gayakwad Prentice Hall
4. Linear Integrated Circuit s, by D Choudhury Roy, New Age International Publishers

Reference Books:
1. Analog Integrated Circuit Design, by, Tony Chan Carusone, David Johns, Kenneth William Martin Wiley, 2012
2. Op-amps and linear integrated circuits, Theory and Applications - James Fiore, Delmar Thomson Learning, 2001

NPTEL/Swayam Link:
Course: Integrated Circuits, MOSFETs, Op -Amps and their Applications by Prof. Hardik Jeetendra Pandya - IISc
Bangalore
https://nptel.ac.in/courses/108/108/108108111/

Theory Examination:
5. Question paper will comprise of 6 questions, each carrying 20 marks.
6. Total four questions need to be solved.
7. Q.1 will be comp ulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be asked.
8. Remaining question will be randomly selected from all the modules.

Page 42

39



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Course
Code Course Name Teaching scheme Credit assigned
BMC403 Principles
Control System
(Abbreviated as
PCS) Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03



Course Code Course Name Credits
BMC403 Principles of Control Systems 3
Course Objectives • To make the learner aware of fundamental concepts of Control systems and
mathematical modelling of the system.
• To make learner study the state variable representation of control system
• To make learner know the concept of time response and frequency response of the
system.
• The learner should be able to do stability analysis of the system and aware of PID
controllers

Course Outcomes • To describe basic concepts of control system such as open loop, closed loop,
feedback and feed forward systems
• To develop the mathematical model of different type of systems
• To analyze systems using state space techniques
• To analyse stability in time domain using root locus and BIBO stability
• To examine correlation between stability analysis of systems in time and
frequency domain
• To analyse effect o f PID controller in control design


Course
Code Course
Name Examination Scheme
Theory
Term
work Pract Oral Pract.
/ Oral Total Internal Assessment End
sem Dura
tion
(hrs) Test 1 Test 2 Avg.
BMC403 Principles
Control
System
(Abbreviate
d as PCS) 20 20 20 80 03 -- -- -- -- 100

Page 43

40



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module
No. Contents Hours
1 Introduction to Control System Analysis:
Open loop and closed loop systems; Feedback and feed forward control structure;
Examples of control systems. 03

2 Mathematical Model ling of Systems:
Transfer function models of systems , Models of electrical systems, Block diagram
reduction; Signal flow graph and the Mason’s gain rule. Standard test signals;
Transient and steady state behaviour of first and second order systems; Type and
order of feedback control systems and steady state error analysis 08

3 State Variable Models :
State variable models of systems. Concept of state transition matrix; Properties of
state transition matrix; Solution of homogeneous systems. Concept of
controllability and observability; Controllability & Observability analysis of LTI
systems using Kalman approach. 08

4 Stability Analysis in Time Domain:
Concept of absolute, Relative and robust stability; Ro uth Hurwitz stability
criterion; Root -locus concepts; General rules for constructing root -locus; Root
locus analysis of control systems. 08

5 Stability Analysis in Frequency Domain:
Frequency domain specifications; Response peak and peak resonating frequency;
Relationship between time and frequency domain of systems; Stability margins.
Magnitude and phase plot; Method of plotting Bode plot; Stability margins on the
Bode plots; Stability analysis using Bode plot. 09

6 Concept of feedback controllers: Concept of proportional, PI and PID
Controllers 03

Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.
Books Recommended:
Text Books:
1. Modern Control Engineering : D.Roy Choudhury, PHI
2. Modem Control Engineering : K. Ogata , PHI
3. Control Systems Engineering: I.J. Nagrath, M. Gopal, Third Edition, New Age International
Publishers.
4. Control Systems: Principle and design, by M. Gopal Tata McGra w Hill, First Edition, 1998
5. Automatic Control Systems – Kuo
6. Modern Control System, Pearson, Richard C. Dorf and Robert H. Bishop, Eleventh Edition, 2013.

Reference Books:
1. Modern Control Technology, Components & Systems – Kilian
2. Analog And Digital Control System Design – Chen
3. Linear Control System Analysis and Design – Sheldon
4. Schaum's Outline of Theory and Problems - Schaum's
5. Automated Continuous Process Control and Multivariable Control – Smith
6. Robust Control System Design State Space Method – Tsui

Page 44

41



University of Mumbai, Biomedical Engineering, Rev 2020 -21
NPTEL /Swayam Link:
Course 1: Control systems by Prof. C.S.Shankar Ram - IIT Madras
https://nptel.ac.in/courses/107/106/107106081/
https://swayam.gov.in/nd1_noc20_ee90/preview
Course 2: Control Engineering by Prof. Ramkrishna Pasumarthy - IIT Madras
https://nptel.a c.in/courses/108/106/108106098/
https://swayam.gov.in/nd1_noc20_ee62/preview

Theory Examination :
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.
3. Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be asked.
4. Remaining question will be randomly select ed from all the modules

Page 45

42



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Course
Code Course Name Teaching scheme Credit assigned

BMC404
Medical Imaging -I
(Abbreviated as
MI-I)
Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03



Course Code Course Name Credits
BMC404 Medical Imaging -I 03
Course Objectives
• To familiarize the learners with the various Imaging modalities in medicine,
their operating principles and quality control aspects.
• To keep the learners abreast with the technological developments in the field
of Medical Imaging.

Course Outcomes Learner will be able to:
• Discuss different parts of a X -Ray Equipment and outline process of X -Ray
Interaction with matter.
• Explain concepts of Radiography techniques such as Computed Radiography
(CR), Digital Radiography (DR) and Mammography with focus on it s
clinical applications.
• Explain working principle of Fluoroscopic Imaging and Digital Subtraction
Angiography and outline its clinical applications.
• Describe system configuration of Computed Tomography, Apply CT Image
Reconstruction Algorithms and enlist its clinical applications.
• Highlight the key advancements in CT Technology and demonstrate its
application in area of Clinical angiography and Cardiac CT

Course
Code Course
Name Examination Scheme
Theory
Term
work Pract Oral Pract.
/ Oral Total Internal Assessment
End
sem Dur
a
tion
(hrs) Test 1 Test 2 Avg.


BMC404
Medical
Imaging -I
(Abbreviate
as MI -I)
20 20 20 80 03 -- -- -- -- 100

Page 46

43



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1. X- Ray Imaging: Properties of X -Rays, Production of X -Rays, X -Ray
interaction with matter, Attenuation of X -Rays. Total Radiographic System: X –
Ray tubes, Rating of X -Ray tubes, X -Ray generators, Filters, Grids, Beam
Restrictors, Control Panel and X -Ray Films. 12
2. Radiography Techniques & Applications: Principle and w orking of Computed
Radiography, Digital Radiography and Mammography with its clinical
applications. 06
3. Fluoroscopic Imaging: X-Ray Image Intensifier, Principle and Working of
C-Arm, Digital Subtraction Angiography and its clinical applications. 04
4. Principle of Computed Tomography: Scanner Configurations/Generations, CT
System: Scanning unit(gantry), Detectors, CT Number, Data Acquisition
System. Spiral CT: Technology and clinical applications, CT artifacts and
Clinical applications of CT 08
5. CT Reconstruction Techniques : Radon Transform, Iterative, Filtered Back
Projection and Fourier reconstruction. 04
6. Advancements in CT: Multi -Detector Computed Tomography (MDCT), Flat
Panel Detectors, Contrast agents in CT, CT -Angiography & Cardiac CT. 05

Internal Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Books Recommended:
Textbooks:
1. Christensen’s Physi cs of Diagnostic Radiology: Thomas Curry, James Dowdey, Robert Murry
(Publisher - Lea & Febiger)
2. Medical Imaging Physics: William R. Hendee (Publisher - Wiley -Blackwell)
3. The Physics of Diagnostic Imaging: David Dowsett (Publisher - CRC Press)

Reference Books:
1. Biomedical Technology and Devices: James Moore, Duncan Maitland (Publisher - CRC Press)
2. The Biomedical Engineering Handbook: Ed. Joseph D. Bronzino (Publisher -CRC Press LLC)
3. Encyclopedia of Medical Devices and Instrumentation: John G. Webs ter. Vol. I, II, III, IV (Marcel
Dekkar Pub).

Theory Examination :
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.
3. Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 t o 5 marks will be asked.
4. Remaining question will be randomly selected from all the modules.

Links:
Course 1: *Introduction to Biomedical Imaging*
https://www.edx.org/course/introduction -to-biomedical -imaging
Course 2: *Fundamentals of Biomedical Imaging: Ultrasounds, X -ray, positron emission tomography
(PET) and applications*
https://www.edx.org/course/fundamental s-of-biomedical -imaging -ultrasounds -x-r

Page 47

44



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned

BMC405 Biomaterials and
Artificial Organs
(Abbreviated as
BMAO) Theory Pract. Tut. Theory Pract. Tut. Total
03 -- -- 03 -- -- 03



Course Code Course Name Credits
BMC405 Biomaterials and Artificial Organs 03
Course Objectives • To understand the fundamentals of biomaterials used for manufacturing implants that
has wide application in healthcare industry.
• To understand design considerations and materials used for manufacturing of various
artificial organs.
Course Outcomes Learners will be able to
• Classify various biomaterials and select biomaterials for specific application
• Explain biological, mechanical and physio -chemical tests conducted on biomaterials
before implantation in the human body.
• Explain properties and applications of metals and ceramic biomaterials.
• Explain properties and applications of polymeric, degradable and composite
biomaterials.
• Explain design aspects and materials used in the fabrication of artificial organs.

Course
Code Course
Name Examination Scheme
Theory
Term
work Pract Oral Pract.
/ Oral Total Internal
Assessment End
sem Dur-
ation
(hrs) Test
1 Test
2 Avg.


BMC405 Biomaterials
and
Artificial
Organs
(Abbreviated
as BMAO) 20 20 20 80 03 -- -- -- -- 100

Page 48

45



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Module Contents Hours
1. Introduction to Biomaterials and Surface Properties of Biomaterials:
Introduction of biomaterials: Classification of biomaterials, general applications;
Corrosion and wear of biomaterials; Biocompatibility : Definition, interaction of
tissues with biomater ials; Surface properties of biomaterials ; Surface
characterization techniques : Electron spectroscopy for chemical analysis (ESCA),
secondary ion mass spectrometry (SIMS), infrared spectroscopy, contact angle
method. 06
2. Testing of Biomaterials:
Mechanical Testing; Physiochemical Testing; Biological Testing: In -vitro testing,
In-vivo testing of Biomaterials. 06
3. Metallic Biomaterials: Properties, applications and biocompatibility of stainless
steel, titanium, titanium based alloys and cobalt – chromium alloys in fabrication of
bio-devices and implants. 04
4. Ceramic Biomaterials: Classification of ceramic biomaterials; Properties,
applications and biocompatibility of alumina, zirconia, bioglass, calcium phosphate
and tricalcium phosphate in fabrication of biodevices and implants. 04
5. Polymeric Biomaterials: Classification of polymeric biomaterials, Thermoplastic
and Thermosetting plastics; Properties and applications of polyurethanes, PTFE,
polyethylene, polypropylene, polyacrylates, PMMA, PHEMA, hydrogel, silicone
rubber, d egradable p olymeric biomaterials (PGA and PLA) and b iopolymer in
fabrication of biodevices and implants.
Composite Biomaterials: Classification, properties, and applications of composite
biomaterials in fabrication of biodevices and implants. 09
6. Artificial Organs: Design considerations and biomaterials involved in
development of artificial heart and cardiac assist devices, heart valves, vascular
grafts, peritoneal dialysis, artificial lungs, artificial liver, artificial pancreas,
artificial blood , artificial skin; 3D bioprinting for manufacturing of artificial skin,
cornea, collagen. 10

Assessment:
Internal Assessment consists of two tests out of which; one should be compulsory class test (on minimum 02
Modules) and the other is either a class test or assignment on live problems or course project.

Books Recommended:
Text Books:
1. Biomaterial Science and Engineering: J.V. Park (Plenum Press - New York)
2. Fundaments of Biomedical Engineering: G S. Sawhney (New Age International Publication)
3. Biomaterial Science: An Introduction to Materials in Medicine: Ratner & Hoffmann (Elsevier
Publi cations)
4. The Biomedical Engineering HandBook: Ed. Joseph D. Bronzino (CRC Press LLC)
5. Artificial Organs: Gerald E. Miller (Morgan and Claypool)
6. 3D Printing in Medicine: Deepak M Kalaskar (Woodhead Publishing)
Reference Books:
1. Encyclopedia of Medical Devices and Instrumentation: John G. Webster. Vol. I, II, III, IV (Marcel
Dekkar Pub).
2. Encyclopedia – Handbook of Biomaterials and Bioengineering: Part -A: Materials Vol I, II Part – B:
Applications Vol. I, II. (Marcel Dekkar Pub)
3. Design Enginee ring on Biomaterials for medical devices: David Hill (John Willey Publication)
4. Biological Performance of Materials, 2nd Edition – Jonathan Black (Marcel Dekker Inc.)

Page 49

46



University of Mumbai, Biomedical Engineering, Rev 2020 -21
NPT EL/Swayam Links:
Course: Medical Biomaterials by Prof. Mukesh Doble - IIT Madras
https://nptel.ac.in/courses/102/106/102106057/

Theory Examination :
1. Question paper will comprise of 6 questions, each carrying 20 marks.
2. Total four questions need to be solved.
3. Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be asked.
4. Remaining question will be randomly select ed from all the modules.

Page 50

47



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BML401 Integrated Circuit
Design Lab
(ICD Lab) Theory Pract. Tut. Theory Pract. Tut. Total
-- 02 -- -- 01 -- 01

Course
Code Course Name Examination Scheme
Theory Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Test 1 Test 2 Avg.
BML401 Integrated
Circuit Design
Lab
(ICD Lab) -- -- -- -- 25 -- -- 25 50

Course Code Course Name Credits
BML401 Integrated Circuit Design Lab
01
Course Objective • To study op -amp parameters and understand the data sheet.
• To provide designing methodologies for basic circuits like amplifiers, filters,
oscillators etc. using operational amplifiers.
• To implement the circuits on bread boards for verifying the outputs and obtain
frequency response.
Course Outcome Learner will be able to:
• Read the data sheet of different ICs, compare the parameters to select
appropriate IC.
• To design and implement var ious building blocks of different biomedical
instruments.


Syllabus: Same as that of BMC403 Linear Integrated Circuits

List of Laboratory Experiments: (Any seven)
1. To study op -amp parameters.
2. To design and verify outputs of inverting amplifier, noninverting amplifier and voltage follower.
3. Design and verify the outputs of adder and subtractor.
4. To design and verify output of instrumentation amplifier.
5. To study frequency response of an integrator
6. To study frequency response of differentiator.
7. To study peak detector circuit.
8. To study half wave rectifier and full wave rectifier.
9. To study RC -phase shift oscillator.
10. To study Wein bridge oscillator.
11. To study comparators and zero crossing detector.
12. To design and study band pass filter using op -amp
13. To design and study notch filter.
14. To study monostable multivibrator using IC 555
15. To study astable multivibrator using IC555
16. To verify outputs of IC 8038

Page 51

48



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Any other experiment based on syllabus which will help learner to understand topic/conce pt

Assessment:
Term Work:
Term work shall consist of minimum 10 experiments.
The distribution of marks for term work shall be as follows:
Laboratory work (Experiments) : 10 Marks
Laboratory work (Journal) : 10 Marks
Attendance : 5 Marks
The final certification and acceptance of term work ensures the satisfactory performance of laboratory work
and minimum passing in the term work.
Books Recommended:
Textbooks:
1. Integrated Circuits K.R. Botkar
2. Design with Operational Amplifiers and Analog Integrated Circuits, by Sergio Franco, McGraw Hill, 2002
3. Op -Amps and linear integrated circuits by Ramakant . Gayakwad Prentice Hall
4. Linear Integrated Circuit s, by D Choudhury Roy, New Age International Publishers

Reference Books:
1. Analog Integrated Circuit Design, by, Tony Chan Carusone, David Johns, Kenneth William Martin Wiley, 2012
2. Op-amps and linear integrated circuits, Theory and Applications - James Fiore, Delmar Thomson Learning, 2001


NPTEL/Swayam Link:
Course: Integrated Circuits, MOSFETs, Op -Amps and their Applications by Prof. Hardik Jeetendra Pandya - IISc
Bangalore
https://nptel.ac.in/courses/108/108/108108111/

Practical exam consists of performance of any one practical from the conducted experiments within
the semester and oral based on entire syllabus.


















Page 52

49



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course
Code Course Name Teaching scheme Credit assigned
BML402 Principles of
Control Systems
Lab
(PCS) Theory Pract. Tut. Theory Pract. Tut. Total
-- 02 -- -- 01 -- 01

Course
Code Course Name Examination Scheme
Theory
Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Test
1 Test
2 Avg.
BML402 Principles of
Control Systems
Lab
(PCS) -- -- -- -- 25 -- -- -- 25


Course Code Course Name Credits
BML402 Principles of Control Systems Lab 01
Course Objectives • To make the learner aware of fundamental concepts of Control systems and
mathematical modelling of the system.
• To make learner study the state variable representation of control system
• To make learner know the concept of time response and frequency response of
the system.
• The learner should be able to do stability analysis of the system and aware of
PID controllers

Course Outcomes • To describe basic concepts of control system such as open loop, closed
loop, feedback and feed forward systems
• To develop the mathematical model of different type of systems
• To analyse systems using state space techniques
• To analyse stability in time domain using root locus and BIBO stability
• To examine correlation between stability analysis o f systems in time and
frequency domain
• To analyse effect of PID controller in control design



List of Experiments: Any 7

1. Time response of first and second order RLC Circuits and systems
2. Frequency response of first and second order system
3. Plotting transient response by varying damping ratio using MATLAB/SCILAB
4. Type of a system and error coefficients
5. Design of standard test signal generators
6. Effect of adding Poles/Zeros in transient response and stability using MATLAB/SCILAB
7. Plot of Root loc us using MATLAB/SCILAB

Page 53

50



University of Mumbai, Biomedical Engineering, Rev 2020 -21 8. To determine frequency response of a second order system and evaluation of frequency domain
specifications.
9. Frequency response of Lag and lead compensators
10. Bode Plot and stability using MATLAB/SCILAB
11. Checking Controllability and observability using MATLAB/SCILAB
12. Transient response/Solution of state equation of state space model using MATLAB/SCILAB
13. To study the effect of P, PI, PD and PID controller on step response of a feedback control system
14. PID Controller using SIMULINK
Students can perform any other experiment/Mini project based on the theory syllabus

Assessment:
Term Work :
Term work shall consist of minimum 7experiments.
The distribution of marks for term work shall be as follows:
Laboratory work (Experiments performance): 10 Marks
Laboratory work (Journal/Mini project): 10 Marks
Attendance :5 Marks

The final certification and acceptance of term work ensures the s atisfactory performance of laboratory work
and minimum passing in the term work.
Oral examination will be based on suggested practical list and entire syllabus.

Books Recommended:
Text Books:
1. Modern Control Engineering : D.Roy Choudhury, PHI
2. Modem Control Engineering : K. Ogata , PHI
3. Control Systems Engineering: I.J. Nagrath, M. Gopal, Third Edition, New Age International
Publishers.
4. Control Systems: Principle and design, by M. Gopal Tata McGraw Hill, First Edition, 1998
5. Automatic Control Systems – Kuo
6. Modern Control System, by Richard C. Dorf and Robert H. Bishop Pearson, Eleventh Edition, 2013.

Reference Books:
1. Modern Control Technology, Components & Systems – Kilian
2. Analog And Digital Control System Design – Chen
3. Linear Control System Analysis and Design – Sheldon
4. Schaum's Outline of Theory and Problems - Schaum's
5. Automated Continuous Process Control and Multivariable Control – Smith
6. Robust Control System Design State Space Method – Tsui

NPTEL /Swayam Link:
Course 1: Control systems by Prof. C.S.Shankar Ram - IIT Madras
https://nptel.ac.in/courses/107/106/107106081/
https://swayam.gov.in /nd1_noc20_ee90/preview
Course 2: Control Engineering by Prof. Ramkrishna Pasumarthy - IIT Madras
https://nptel.ac.in/courses/108/106/108106098/
https://swayam.gov.in/nd1_noc20_ee62/preview




Page 54

51



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Course
Code Course Name Teaching scheme Credit assigned

BML403
Medical Imaging -I
(Abbreviated as
MI-I)
Theory Pract. Tut. Theory Pract. Tut. Total
-- 02 -- -- 01 -- 01



Course Code Course Name Credits
BML403 Medical Imaging -I 01
Course Objectives
• To familiarize the learners with the various Imaging modalities in medicine,
their operating principles and quality control aspects.
• To keep the learners abreast with the technological developments in the field
of Medical Imaging.

Course Outcomes Learner will be able to:
• Discuss different parts of a X -Ray Equipment and outline process of X -Ray
Interaction with matter.
• Explain concepts of Radiography techniques such as Computed Radiography
(CR), Digital Radiography (DR) and Mammography with focus on it s clinical
applications.
• Explain working principle of Fluoroscopic Imaging and Digital Subtraction
Angiography and outline its clinical applications.
• Describe system configuration of Computed Tomography, Apply CT Image
Reconstruction Algorithms and enlist its clinical applications.
• Highlight the key advancements in CT Technology and demonstrate its
application in area of Clinical angiography and Cardiac CT


Syllabus: Same as that of BMC404 Medical Imaging – I (Abbreviated as MI -I)
Course
Code Course
Name Examination Scheme
Theory
Term
work Pract Oral Pract.
/ Oral Total Internal Assessment
End
sem Dur
a
tion
(hrs) Test 1 Test 2 Avg.

BML403
Medical
Imaging -I
(Abbreviate
d as MI -I) -- -- -- -- -- 25 -- 25 -- 50

Page 55

52



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Suggested List of Laboratory Experiments (Any Seven)
1. Study of X -Ray tube & Tube Housing
2. Prototype of X -Ray Generator Circuits
3. Design of X -Ray Timer
4. Comparative study of modern X -Ray machines manufactured by different companies
5. Simulation of Digital Subtra ction Angiography using MATLAB
6. Comparative study of CT Machines manufactured by different companies
7. Case study on any disease/abnormality which require imaging modality for diagnosis
8. To perform CT windowing on an Image using MATLAB
9. To perform back projecti on on an Image using MATLAB
10. To generate pseudo colour image using MATLAB
11. Hospital Visit may be conducted to Radiology Department (Report by student is expected)
12. Technical paper review on the advanced topic (Report by student is expected)
13. Seminar talk by experts from industries (Report by student is expected)

Any other experiment based on syllabus which will help students to understand topic/concept.

Mandatory Activity: Group Presentations on the Latest Technology and Improvements in Medical Imaging
(Report by student is expected)

Assessment:
Term Work:
Laboratory work shall consist of minimum 7 experiments. The distribution of marks for term work shall be as
follows:
Laboratory work (Experiments & Journal): 10 Marks
Assignments: 05 Marks
Presentation: 05 Marks
Attendance: 05 Marks
Total: 25Marks

The fi nal certification and acceptance of term work ensures the satisfactory performance of laboratory work
and minimum passing in the term work.

Books Recommended:
Textbooks:
1. Christensen’s Physics of Diagnostic Radiology: Thomas Curry, James Dowdey , Robert Murry
(Publisher - Lea & Febiger)
2. Medical Imaging Physics: William R. Hendee (Publisher - Wiley -Blackwell)
3. The Physics of Diagnostic Imaging: David Dowsett (Publisher - CRC Press)

Reference Books:
1. Biomedical Technology and Devices: James Moore, Duncan Maitland (Publisher - CRC Press)
2. The Biomedical Engineering Handbook: Ed. Joseph D. Bronzino (Publisher -CRC Press LLC)
3. Encyclopedia of Medical Devices and Instrumentation: John G. Webster. Vol. I, II, III, IV (Marcel
Dekkar Pub).




Page 56

53



University of Mumbai, Biomedical Engineering, Rev 2020 -21
Course
Code Course Name Teaching scheme Credit assigned
BML404 Computing Lab
(Skill Based Lab) Theory Pract. Tut. Theory Pract. Tut. Total
-- 04 -- -- 02 -- 02

Course
Code Course Name Examination Scheme
Theory Term
work Pract. Oral Pract.
/ Oral Total Internal Assessment End
sem Test 1 Test 2 Avg.
BML404 Computing Lab
(Skill Based Lab)
-- -- -- -- 25 -- -- 25 50

Course Code Course Name Credits
BML404 Computing Lab (Skill Based Lab) 02
Course Objective • To understand basic concepts of Python programming language.
• To understand decision controls and functions
• To understand the utilization of various libraries in Python
Course Outcome Learner will be able to:
• Describe Numbers, Strings, Lists, Tuples, Dictionaries, Array and Math
functions in Python
• Express different Decision Making statements and Functions
• Illustrate different file handling operations
• Interpret object oriented programming in Python
• Develop proficiency in handling Python librar ies

Page 57

54



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Module Contents Hours
1 Introduction to Python
Installation and resources; Introduction of the Python object types: Numbers,
Strings, Lists, Tuples, Dictionaries, Arrays; Numeric types; Assignments;
Expressions; Print statements and formats. 08
2 Decision Control Statements and Functions: if and else statement, if -elif-else
statement, Loop Statement: While loops, for loops, Break, Continue, and Pass,
Functions: Defining and calling functions, Return statements, Passing the
arguments, Lambda Functions, Recursive functions. 10
3 Files Handling: Types of Files in Python, Opening a File, Closing a File. Writing
Text Files, Knowing Whether a File Exists or Not, Working with Binary Files,
Appending Text to a File, Reading Text Files, File Exceptions,
The with Statement 10
4 Object Oriented Programming: Introduction to OOP: Classes and Objects,
Public and Private Members, Class Declaration and Object Creation, Object
Initialization, Class Variables and methods, Accessing Object and Class Attributes;
Inheritance; Const ructors ; Exception handling. 08
5 Numpy , Matplotlib :
Introduction to Numpy: Creating and Printing Ndarray, Class and Attributes of
Ndarray , Basic operation, Copy and view, Mathematical Functions of Numpy.
Introduction to Matplotlib library: Line properties, Plo ts and subplots, Types of
Plots. 10
6 Pandas, Seaborn :
Introduction to Pandas: Understanding Dataframe, View and Select Data, Missing
Values, Data Operations, File read and write operation.
Introduction to Seaborn. 06

List of experiments
1. Write python programs to understand expressions, variables, quotes, basic math operation.
2. Write a Python program to remove elements from the list.
3. Write a Python program to understand concept of tuple and dictionary. (creating, accessing elements
and deleting elements)
4. Write a Python program to demonstra te if-else, for loop and while loop.
5. Write a Python program to demonstrate continue, break and pass statement.
6. Write a Python program to read, write and copy write from a file.
7. Write a Python program to perform different file handling functions
8. Write a Python program to demonstrate working of classes and objects and members.
9. Write a Python program to demonstrate class method & static method.
10. Write a Python program to demonstrate constructors.
11. Write a Python program to demonstrate inheritance.
12. Write a Py thon program to demonstrate sorting in numpy.
13. Write a Python program to perform merging, joining and concatenating using Panda.
14. Write a Python program to plot the data using matplotlib

Any other experiment based on syllabus which will help students to und erstand topic/concept
Assessment:
Term Work:
Term work shall consist of minimum 12 experiments.

The distribution of marks for term work shall be as follows:
Laboratory work (Experiments) : 10 Marks

Page 58

55



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Laboratory work (Journal) : 10 Marks
Attendance : 5 Marks
The final certification and acceptance of term work ensures the satisfactory performance of laboratory work
and minimum passing in the term work.

Books Recommended:

Text Books:
1. Introduction to computing and problem solving using python, E Balagurusamy, McGraw Hill Education
2. Core Python Programming, Dr. R. Nageswara Rao, Dreamtech Press
3. John Grayson, “Python and Tkinter Programming”, Manning Publications (1 March 1999).
4. Dusty Phillips, “Python 3 object -oriented Programming”, Second Edition PACKT Publisher August
2015.
5. Yashavant Kanetkar, “Let us Python: Python is Future, Embrace it fast”, BPB Publications; 1
edition (8 July 2019).
6. Beginning Python: Using Python 2.6 and Python 3.1. James Payne, Wrox publication

Reference Books:
1. Python Cookbook: Recipes for Mastering Python 3, by David Beazley, Brian K. Jones O'Reilly Media; 3
edition (10 May 2013).
2. Learn Python the Hard Way: A Very Simple Introduction to the Terrifyingly Beautiful World of
Computers and Code , by Zed A. Shaw Addison Wesley; 3 edition (1 October 2013).
3. Introduction to Machine Learning with Python , by Andreas C. Mueller O′Reilly; 1 edition (7 October
2016)
4. Python Crash Course A hands -on, Project Based Introduction to programmin g, by Eric Matthes No Starch
Press; 1 edition (8 December 2015).
5. Tkinter GUI Application Development Blueprints: Master GUI programming in Tkinter as you design,
implement, and del iver 10 real world application, by Bhaskar Chaudhary Packt Publis hing (November 30,
2015)
6. Head First Python , by Paul Barry O′Reilly; 2 edition (16 December 2016)

NPT EL/Swayam Links:
Course: Programming, Data Structures and Algorithms using Python by Prof. Madhavan Mukund -IIT Madras
https://nptel.ac.in/courses/106/106/106106145/

Page 59

56



University of Mumbai, Biomedical Engineering, Rev 2020 -21 Course code Course Name Credits
BMM401 Mini Project - 1 B 02

Course Code Course Name Credits
BMM401 Mini Project – 1 B 02
Course Objective • To acquaint with the process of identifying the needs and converting it into the
problem .
• To familiarize the process of solving the problem in a group .
• To acquaint with the process of applying basic engineering fundamental s to
attempt solutions to the problems.
• To inculcate the process of self -learning and research.
Course Outcome Learner will be able to:
• Identify problems based on societal /research needs.
• Apply Knowledge and skill to solve societal problems in a group.
• Develop interpersonal skills to work as member of a group or leader.
• Draw the proper inferences from available results through theoreti cal/
experimental/simulations .
• Analyse the impact of solutions in societal and environmental context for
sustainable development.
• Use standard norms of engineering practices
• Excel in written and oral communication.
• Demonstrate capabilities of self -learni ng in a group, which leads to life long
learning.
• Demonstrate project management principles during project work.

Guidelines for Mini Project
• Students shall form a group of 3 to 4 students, while forming a group shall not be allowed less than
three or more than four students, as it is a group activity.
• Students should do survey and identify needs, which shall be converted into problem statement for
mini project in consultation with faculty supervisor/head of department/internal committee of
faculties.
• Students shall submit implementation plan in the form of Gantt/PERT/CPM chart, which will cover
weekly activity of mini project.
• A log book to be prepared by each group, wherein group can record weekly work progress,
guide/supervisor can verify and record notes/comments.
• Faculty supervisor may give inputs to students during mini project activity; however, focus shall be
on self -learning.
• Students in a group shall understand problem effectively, propose multiple solution and select best
possibl e solution in consultation with guide/ supervisor.
• Students sh all convert the best solution into working model using various components of their
domain areas and demonstrate.

Page 60

57



University of Mumbai, Biomedical Engineering, Rev 2020 -21 • The solution to be validated with proper justification and report to be compile d in standard format
of University of Mumbai .
• With the focus on the self -learning, innovation, addressing societal problems and entrepreneurship
quality development within the students through the Mini Projects, it is preferable that a single
project of a ppropriate level and quality to be carried out in two semesters by all the groups of the
students. i.e. Mini Project 1 in semester III and IV. Similarly, Mini Project 2 in semesters V and VI.
• However, based on the individual students or group capability, with the mentor’s recommendations,
if the proposed Mini Project adhering to the qualitative aspects mentioned above gets completed in
odd semester, then that group can be allowed to work on the extension of the Mini Project with
suitable improvements/modif ications or a completely new project idea in even semester. This policy
can be adopted on case by case basis.
Guidelines for Assessment of Mini Project :
Term Work
• The review/ progress monitoring committee shall be constituted by head of departments of
each institute. The progress of mini project to be evaluated on continuous basis, minimum two
reviews in each semester.
• In continuous assessment focus shall also be on each individual student, assessment based on
individual’s contribution in group activity, their understanding and response to questions.
• Distribution of Term work marks for both semesters shall be as below;
o Marks awarded by guide/supervisor based on log book : 10
o Marks awarded by review committee : 10
o Quality of Project repo rt : 05
Review/progress monitoring committee may consider following points for
assessment based on either one year or half year project as mentioned in general
guidelines.
One-year project:
• In first semester entire theoretical solution shall be rea dy, including components/system
selection and cost analysis. Two reviews will be conducted based on presentation given by
students group.
▪ First shall be for finalisation of problem
▪ Second shall be on finalisation of proposed solution of problem.
• In second semester expected work shall be procurement of component’s/systems, building of
working prototype, testing and validation of results based on work completed in an earlier
semester.
▪ First review is based on readin ess of building working prototype to be conducted.
▪ Second review shall be based on poster presentation cum demonstration of working
model in last month of the said semester.

Half -year project:
• In this case in one semester students’ group shall complete project in all aspects including,
o Identification of need/problem
o Proposed final solution
o Procurement of components/systems

Page 61

58



University of Mumbai, Biomedical Engineering, Rev 2020 -21 o Building prototype and testing
• Two reviews will be conducted for continuous assessment,
▪ First shall be for finalisation of problem and proposed solution
▪ Second shall be for implementation and testing of solution.

Assessment criteria of Mini Project.

Mini Project shall be assessed based on following criteria;
1. Quality of survey/ need identification
2. Clarity of Problem definition based on need.
3. Innovativeness in solutions
4. Feasibility of proposed problem solutions and selection of best solution
5. Cost effectiveness
6. Societal impact
7. Innovativeness
8. Cost effectiveness and Societal impact
9. Full functioning of working model as per stated requirements
10. Effective use of skill sets
11. Effective use of standard engineering norms
12. Contribution of an individual’s as member or leader
13. Clarity in written and oral communica tion

• In one year, project , first semester evaluation may be based on first six criteria’s and remaining
may be used for second semester evaluation of performance of students in mini project .
• In case of half year project all criteria’s in generic may be co nsidered for evaluation of performance
of students in mini project.
Guidelines for Assessment of Mini Project Practical/Oral Examination:
• Report should be prepared as per the guidelines issued by the University of Mumbai.
• Mini Project sh all be assess ed through a presentation and demonstration of working model by the
student project group to a panel of Internal and External Examiners preferably from industry or
research organisations having experience of more than five years approved by head of Institu tion.
• Students shall be motivated to publish a paper based on the work in Conferences/students
competitions.
Mini Project shall be assessed based on following points;
1. Quality of problem and Clarity
2. Innovativeness in solutions
3. Cost effectiveness and Societal impact
4. Full functioning of working model as per stated requirements
5. Effective use of skill sets
6. Effective use of standard engineering norms
7. Contribution of an individual’s as member or leader
8. Clarity in written and oral communica tion