TE CIVIL SYLLABUS R19 C SCHEME1 1 Syllabus Mumbai University by munotes
Page 2
Copy to : -
1. The Deputy Registrar, Academic Authorities Meetings and Services
(AAMS),
2. The Deputy Registrar, College Affiliations & Development
Department (CAD),
3. The Deputy Registrar, (Admissions, Enrolment, Eligibility and
Migration Department (AEM),
4. The Deputy Registrar, Research Administration & Promotion Cell
(RAPC),
5. The Deputy Registrar, Executive Authorities Section (EA),
6. The Deputy Registrar, PRO, Fort, (Publi cation Section),
7. The Deputy Registrar, (Special Cell),
8. The Deputy Registrar, Fort/ Vidyanagari Administration Department
(FAD) (VAD), Record Section,
9. The Director, Institute of Distance and Open Learni ng (IDOL Admin),
Vidyanagari,
They are requested to treat this as action taken report on the concerned
resolution adopted by the Academic Council referred to in the above circular
and that on separate Action Taken Report will be sent in this connection.
1. P.A to Hon’ble Vice -Chancellor,
2. P.A Pro -Vice-Chancellor,
3. P.A to Registrar,
4. All Deans of all Faculties,
5. P.A to Finance & Account Officers, (F.& A.O),
6. P.A to Director, Board of Examinations and Evaluation,
7. P.A to Director, Innovation, Incubation and Linkages,
8. P.A to Director, Board of Lifelong Learning and Extension (BLLE),
9. The Director, Dept. of Information and Communication Technology
(DICT) (CCF & UCC), Vidyanagari,
10. The Director of Board of Student Development,
11. The Director, Dep artment of Students Walfare (DSD),
12. All Deputy Registrar, Examination House,
13. The Deputy Registrars, Finance & Accounts Section,
14. The Assistant Registrar, Administrative sub -Campus Thane,
15. The Assistant Registrar, School of Engg. & Applied Sciences, Kalyan ,
16. The Assistant Registrar, Ratnagiri sub -centre, Ratnagiri,
17. The Assistant Registrar, Constituent Colleges Unit,
18. BUCTU,
19. The Receptionist,
20. The Telephone Operator,
21. The Secretary MUASA
for information.
Page 3
AC-29/06/2021
Item No. -6.2
Page 4
Syllabus for Approval
Title of the Course : Third Year in Bachelor of Civil Engineering
Eligibility for Admission : After Passing First Year Engineering as per the
Ordinance 0.6242
Passing Marks : 40%
Ordinances / Regulations (if any) : Ordinance 0.6242
No. of Years / Semesters : 8 semesters
Level : Under Graduation
Pattern : Semester
Status : New
To be implemented from
Academic Year : With effect from Academic Year: 202 1-2022
Dr. S. K. Ukarande
Associate Dean
Faculty of Science and Technology,
University of Mumbai, Mumbai
Dr Anuradha Muzumdar
Dean
Faculty of Science and Technology,
University of Mumbai, Mumbai
Page 5
Preamble
To meet the challenge of ensuring excellence in engineering education, the issue of quality needs to be
addressed, debated and taken forward in a systematic manner. Accreditation is the principal means of
quality assurance i n higher education. The major emphasis of accreditation process is to measure the
outcomes of the program that is being accredited. In line with this Faculty of Science and Technology
(in particular Engineering) of University of Mumbai has taken a lead in incorporating philosophy of
outcome based education in the process of curriculum development.
Faculty resolved that course objectives and course outcomes are to be clearly defined for each course,
so that all faculty members in affiliated institutes unders tand the depth and approach of course to be
taught, which will enhance learner’s learning process. Choice based Credit and grading system enables
a much -required shift in focus from teacher -centric to learner -centric education since the workload
estimated is based on the investment of time in learning and not in teaching. It also focuses on
continuous evaluation which will enhance the quality of education. Credit assignment for courses is
based on 15 weeks teaching learning process, however content of cours es is to be taught in 13 weeks
and remaining 2 weeks to be utilized for revision, guest lectures, coverage of content beyond syllabus
etc.
There was a concern that the earlier revised curriculum more focused on providing information and
knowledge across va rious domains of the said program, which led to heavily loading of students in
terms of direct contact hours. In this regard, faculty of science and technology resolved that to minimize
the burden of contact hours, total credits of entire program will be o f 170, wherein focus is not only on
providing knowledge but also on building skills, attitude and self learning. Therefore in the present
curriculum skill based laboratories and mini projects are made mandatory across all disciplines of
engineering in seco nd and third year of programs, which will definitely facilitate self learning of
students. The overall credits and approach of curriculum proposed in the present revision is in line with
AICTE model curriculum.
The present curriculum will be implemented fo r Third Year of Engineering from the Academic year
2021-22. Subsequently this will be carried forward for Final Year Engineering in the academic years
2022 -23.
Dr. S. K. Ukarande
Associate Dean
Faculty of Science and Technology,
University of Mumbai, Mumbai
Dr Anuradha Muzumdar
Dean
Faculty of Science and Technology,
University of Mumbai, Mumbai
Page 6
Incorporation and Implementation of Online Contents from
NPTEL/ Swayam Platform
The curriculum revision is mainly focused on knowledge component, skill -based activities and project -
based activities. Self -learning opportunities are provided to learners. In the revision process this time
in particular Revised syllabus of ‘C’ scheme wherever possible additional re source links of platforms
such as NPTEL, Swayam are appropriately provided. In an earlier revision of curriculum in the year
2012 and 2016 in Revised scheme ‘A' and ‘B' respectively, efforts were made to use online contents
more appropriately as additional learning materials to enhance learning of students.
In the current revision based on the recommendation of AICTE model curriculum overall credits are
reduced to 171, to provide opportunity of self -learning to learner. Learners are now getting sufficient
time for self -learning either through online courses or additional projects for enhancing their knowledge
and skill sets.
The Principals/ HoD’s/ Faculties of all the institute are required to motivate and encourage learners to
use additional online resource s available on platforms such as NPTEL/ Swayam. Learners can be
advised to take up online courses, on successful completion they are required to submit certification for
the same. This will definitely help learners to facilitate their enhanced learning bas ed on their interest.
Dr. S. K. Ukarande
Associate Dean
Faculty of Science and Technology,
University of Mumbai, Mumbai
Dr Anuradha Muzumdar
Dean
Faculty of Science and Technology,
University of Mumbai, Mumbai
Page 7
Preface
The engineering education in India is expanding and is set to increase manifold. The major challenge
in the current scenario is to ensure quality to the stakeholders along with expansion. To meet this
challenge, the issue of quality needs to be addressed, deba ted and taken forward in a systematic manner.
Accreditation is the principal means of quality assurance in higher education and reflects the fact that
in achieving recognition, the institution or program of study is committed and open to external review
to meet certain minimum specified standards. The major emphasis of this accreditation process is to
measure the outcomes of the program that is being accredited. Program Outcomes (POs) are essentially
a range of skills and knowledge that a student will have at the time of graduation from the program. In
line with this, Faculty of Technology of University of Mumbai has taken a lead in incorporating the
philosophy of outcome -based education (OBE) in the process of curriculum development from Rev -
2012 onwards an d continued to enhance the curriculum further based on OBE in Rev -2016 and Rev -
2019 “C” scheme.
As Chairman and Members of Board of Studies in Civil Engineering, University of Mumbai, we are
happy to state here that, the Program Educational Objectives (PEOs) for Undergraduate Program were
finalized in a brain storming session, which was attended by more than 40 members from different
affiliated Institutes of the University, who are either Heads of Departments or their senior
representatives f rom the Department of Civil Engineering. The PEOs finalized for the undergraduate
program in Civil Engineering are listed below;
1. To prepare the Learner with a sound foundation in mathematical, scientific and engineering
fundamentals
2. To motivate the Learner in the art of self -learning and to use modern tools for solving real life
problems
3. To prepare the Learner for a successful career in Indian and Multinational Organisations and
for excelling in post -graduate studies
4. To motivate learners for life -long learn ing
5. To inculcate a professional and ethical attitude, good leadership qualities and commitment to
social responsibilities in the Learner’s thought process
In addition to the above listed PEOs, every institute is encouraged to add a few (2 -3) more PEOs suit ing
their institute vision and mission
Apart from the PEOs, for each course of the program, objectives and expected outcomes from a
learner’s point of view are also included in the curriculum to support the philosophy of OBE. We
strongly believe that even a small step taken in the right direction will definitely help in providing
quality education to the major stakeholders.
Board of Studies in Civil Engineering
University of Mumbai
Dr. S. K. Ukarande Chairman Dr. V. Jothiprakash Member
Dr. D.D. Sarode Member Dr. K. K. Sangle Member
Dr. S. B. Charhate Member Dr. D. G. Regulawar Member
Dr. Milind Waikar Member Dr. A. R. Kambekar Member
Dr. R.B. Magar Member Dr. Seema Jagtap Member
Page 8
Undergraduate Program Structure for Second year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2020 -2021 )
Semester – III
Course
Code Course Name Teaching Scheme
(Contact Hours) Credit Assigned
Theory Pract. Tut. Theory Pract. Tut. Total
CEC301 Engineering Mathematics – III 03 - 01 03 - 01 04
CEC302 Mechanics of S olids 04 - - 04 - - 04
CEC303 Engineering Geology 03 - - 03 - - 03
CEC304 Architectural Planning &
Design of Building s 02 - - 02 - - 02
CEC305 Fluid Mechanics – I 03 - - 03 - - 03
CEL301 Mechanics of S olids - 02 - - 01 - 01
CEL302 Engineering Geology - 02 - - 01 - 01
CEL303 Architectural Planning &
Design of Building s - 02 - - 01 - 01
CEL304 Fluid Mechanics – I - 02 - - 01 - 01
CEL305 Skill Based Lab Course – I - 03 - - 1.5 - 1.5
CEM301 Mini Project – 1A - 03$ - - 1.5 - 1.5
Total 15 14 1 15 7 1 23
Examination Scheme
Course
Code Course Name Internal
Assessment End
Sem
Exam Exam
Duration
(Hrs.) Term
Work Pract.
/Oral Total Test
- I Test
– II Avg.
CEC301 Engineering Mathematics –III 20 20 20 80 03 25 - 125
CEC302 Mechanics of Solids 20 20 20 80 03 - - 100
CEC303 Engineering Geology 20 20 20 80 03 - - 100
CEC304 Architectural Planning &
Design of Buildings 20 20 20 80 03 - - 100
CEC305 Fluid Mechanics – I 20 20 20 80 03 - - 100
CEL301 Mechanics of Solids - - - - - 25 25 50
CEL302 Engineering Geology - - - - - 25 25 50
CEL303 Architectural Planning &
Design of Buildings - - - - - 25 25 50
CEL304 Fluid Mechanics – I - - - - - 25 25 50
CEL305 Skill Based Lab Course – I - - - - - 50 - 50
CEM301 Mini Project – 1A - - - - - 50 - 50
Total 100 400 - 225 100 825
$ indicates work load of Learner (Not Faculty), for Mini Project.
Page 9
Undergraduate Program Structure for Second year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2020 -2021 )
Semester IV
Course
Code Course Name Teaching Scheme
(Contact Hours) Credit Assigned
Theory Pract. Tut. Theory Pract. Tut. Total
CEC401 Engineering Mathematics – IV 03 - 01 03 - 01 04
CEC402 Structural Analysis 04 - - 04 - - 04
CEC403 Surveying 03 - - 03 - - 03
CEC404 Building Materials & Concrete
Technology 03 - - 03 - - 03
CEC405 Fluid Mechanics -II 03 - - 03 - - 03
CEL401 Structural Analysis - 02 - - 01 - 01
CEL402 Surveying - 03 - - 1.5 - 1.5
CEL403 Building Material Concrete
Technology - 02 - - 01 - 01
CEL404 Fluid Mechanics -II - 02 - - 01 - 01
CEL405 Skill Based lab Course – II - 02 - - 01 - 01
CEM401 Mini Project – 1B - 03$ - - 1.5 - 1.5
Total 16 14 01 16 07 01 24
Examination Scheme
Course
Code Course Name Internal
Assessment End
Sem
Exam Exam
Duration
(Hrs.) Term
Work Pract.
/Oral Total Test
- I Test
– II Avg.
CEC401 Engineering Mathematics -IV 20 20 20 80 03 25 - 125
CEC402 Structural Analysis 20 20 20 80 03 - - 100
CEC403 Surveying 20 20 20 80 03 - - 100
CEC404 Building Materials &
Concrete Technology 20 20 20 80 03 - - 100
CEC405 Fluid Mechanics -II 20 20 20 80 03 - - 100
CEL401 Structural Analysis - - - - - 25 25 50
CEL402 Surveying - - - - - 50 25 75
CEL403 Building Material Concrete
Technology - - - - - 25 25 50
CEL404 Fluid Mechanics -II - - - - - 25 25 50
CEL405 Skill Based lab Course - II - - - - - 50 - 50
CEM401 Mini Project – 1B - - - - - 25 25 50
Total 100 400 - 225 125 850
$ indicates work load of Learner (Not Faculty), for Mini Project.
Page 10
Undergraduate Program Structure for Third year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2021 -2022 )
Semester - V
Course
Code Course Name Teaching Scheme
(Contact Hours) Credit Assigned
Theory Pract. Tut. Theory Pract. Tut. Total
CEC501 Theory of Reinforced Concrete
Structures 03 - - 03 - - 03
CEC502 Applied Hydraulics 03 - - 03 - - 03
CEC503 Geotechnical Engineering -I 03 - - 03 - - 03
CEC504 Transportation Engineering 04 - - 04 - - 04
CEDLO501X Department Level Optional
Course -1 03 - - 03 - - 03
CEL501 Theory of Reinforced Concrete
Structures - 02 - - 01 - 01
CEL502 Applied Hydraulics - 02 - - 01 - 01
CEL503 Geotechnical Engineering -I - 02 - - 01 - 01
CEL504 Transportation Engineering - 02 - - 01 - 01
CEL505 Professional Communication
and Ethics -II - 02*+2 - - 02 - 02
CEM501 Mini Project – 2A - 04$ - - 02 - 02
Total 16 16 - 16 08 - 24
Examination Scheme
Course
Code Course Name Internal
Assessment End
Sem
Exam Exam
Duration
(Hrs.) Term
Work Pract
/Oral Total Test
- I Test
– II Avg.
CEC501 Theory of Reinforced
Concrete Structures 20 20 20 80 03 - - 100
CEC502 Applied Hydraulics 20 20 20 80 03 - - 100
CEC503 Geotechnical Engineering -I 20 20 20 80 03 - - 100
CEC504 Transportation Engineering 20 20 20 80 03 - - 100
CEDLO501
X Department Level Optional
Course -1 20 20 20 80 03 - - 100
CEL501 Theory of Reinforced
Concrete Structures - - - - - 25 25 50
CEL502 Applied Hydraulics - - - - - 25 25 50
CEL503 Geotechnical Engineering -I - - - - - 25 25 50
CEL504 Transportation Engineering - - - - - 25 25 50
CEL505 Professional
Communication and Ethics -
II - - - - - 25 25 50
CEM501 Mini Project – 2A - - - - - 25 25 50
Total 100 400 - 150 150 800
* Theory class to be conducted for full class
$ indicates work load of Learner (Not Faculty), for Mini Project
Page 11
Undergraduate Program Structure for Third year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2021 -2022 )
Semester - V
Department Level Optional Course – 1
Sr. No. Course Code
CEDLO501X Department Level Optional Course – 1
1 CEDLO5011 Modern Surveying Instruments and Techniques
2 CEDLO5012 Building Services & Repairs
3 CEDLO5013 Sustainable Building Material s
4 CEDLO5014 Advanced Structural Mechanics
5 CEDLO5015 Air and Noise Pollution & Control
6 CEDLO5016 Transportation Planning & Economics
7 CEDLO5017 Advanced Concrete Technology
Page 12
Undergraduate Program Structure for Third year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2021 -2022 )
Semester VI
Course
Code Course Name Teaching Scheme
(Contact Hours) Credit Assigned
Theory Pract. Tut. Theory Pract. Tut. Total
CEC 601 Design & Drawing of Steel
Structure s 03 - - 03 - - 03
CEC 602 Water Resources Engineering 03 - - 03 - - 03
CEC 603 Geotechnical Engineering -II 03 - - 03 - - 03
CEC 604 Environmental Engineering 04 - - 04 - - 04
CEDLO601X Department Level Optional
Course -2 03 - - 03 - - 03
CEL601 Design & Drawing of Steel
Structure s - 02 - - 01 - 01
CEL602 Water Resources Engineering - 02 - - 01 - 01
CEL603 Geotechnical Engineering -II - 02 - - 01 - 01
CEL604 Environmental Engineering - 02 - - 01 - 01
CEL605 Skill Based Lab Course – III - 03 - - 1.5 - 1.5
CEM601 Mini Project – 2B - 03$ - - 1.5 - 1.5
Total 16 14 - 16 07 - 23
Examination Scheme
Course
Code Course Name Internal
Assessment End
Sem
Exam Exam
Duration
(Hrs.) Term
Work Pract.
/Oral Total Test
– I Test
- II Avg.
CEC601 Design & Drawing of Steel
Structure s 20 20 20 80 04 - - 100
CEC602 Water Resources
Engineering 20 20 20 80 03 - - 100
CEC603 Geotechnical Engineering -II 20 20 20 80 03 - - 100
CEC604 Environmental Engineering 20 20 20 80 03 - - 100
CEDLO601X Department Level
Optional Course -2 20 20 20 80 03 - - 100
CEL601 Design & Drawing of Steel
Structures - - - - - 25 25 50
CEL602 Water Resources
Engineering - - - - - 25 25 50
CEL603 Geotechnical Engineering -II - - - - - 25 25 50
CEL604 Environmental Engineering - - - - - 25 25 50
CEL605 Skill Based Lab Course -III - - - - - 25 25 50
CEM601 Mini Project – 2B - - - - - 25 25 50
Total 100 400 - 150 150 800
Page 13
$ indicates work load of Learner (Not Faculty), for Mini Project.
Undergraduate Program Structure for Third year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2021 -2022 )
Semester - VI
Department Level Optional Course – 2
Sr. No. Course Code
CEDLO601X Department Level Optional Course – 2
1 CEDLO6011 Rock Mechanics
2 CEDLO6012 Biological Processes & Contaminant Removal
3 CEDLO6013 Construction Equipment & Techniques
4 CEDLO6014 Urban Infrastructure Planning
5 CEDLO6015 Open Channel Flow
6 CEDLO6016 Computational Structural Analysis
7 CEDLO6017 Traffic Engineering and Management
8 CEDLO6018 Introduction to Offshore Engineering
Page 14
Program Structure for Third Year Engineering
Semester VII & VIII
UNIVERSITY OF MUMBAI
(With Effect from 2022 -2023)
Semester - VII
Course
Code Course Name Teaching Scheme
(Contact Hours) Credit Assigned
Theory Pract. Tut. Theory Pract. Tut. Total
CEC701 Design & Drawing of Reinforced
Concrete Structure s 03 - - 03 - - 03
CEC702 Quantity Survey, Estimation and
Valuation 03 - - 03 - - 03
CEDLO701X Department Level Optional Course – 3 03 - - 03 - - 03
CEDLO702X Department Level Optional Course – 4 03 - - 03 - - 03
CEILO701X Institute Level Optional Course – 1 03 - - 03 - - 03
CEL701 Design & Drawing of Reinforced
Concrete Structure s - 02 - - 01 - 01
CEL702 Quantity Survey, Estimation and
Valuation - 02 - - 01 - 01
CEP701 Major Project – I - 06$ - - 03 - 03
Total 15 10 - 15 05 - 20
Examination Scheme
Course
Code Course Name Internal Assessment End
Sem
Exam Exam
Duration
(Hrs.) Term
Work Pract
/Oral Total Test
- I Test
– II Avg.
CEC701 Design & Drawing of
Reinforced Concrete Structure 20 20 20 80 04 - - 100
CEC702 Quantity Survey, Estimation
and Valuation 20 20 20 80 04 - - 100
CEDLO701
X Department Level Optional
Course – 3 20 20 20 80 03 - - 100
CEDLO702
X Department Level Optional
Course – 4 20 20 20 80 03 - - 100
CEILO701
X Institute Level Optional Course
– 1 20 20 20 80 03 - - 100
CEL701 Design & Drawing of
Reinforced Concrete Structure - - - - - 25 25 50
CEL702 Quantity Survey, Estimation
and Valuation - - - - - 25 25 50
CEP701 Major Project – I - - - - - 50 - 50
Total 100 400 - 100 50 650
$ indicates work load of Learner (Not Faculty), for Major Project.
Page 15
Undergraduate Program Structure for Final year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2022 -2023 )
Semester - VII
Department Level Optional Course – 3
Sr. No. Course Code
CEDLO701X Department Level Optional Course – 3
1 CEDLO7011 Prestressed Concrete
2 CEDLO7012 Applied Hydrology and Flood Control
3 CEDLO7013 Appraisal and Implementation of Infra Projects
4 CEDLO7014 Analysis of Offshore Structures
5 CEDLO7015 Advanced Construction Technology
6 CEDLO7016 Pavement Materials Construction and Maintenance
Department Level Optional Course – 4
Sr. No. Course Code
CEDLO702X Department Level Optional Course – 4
1 CEDLO7021 Foundation Analysis and Design
2 CEDLO7022 Solid hazardous waste management
3 CEDLO7023 Ground Improvement techniques
4 CEDLO7024 Green building constructions
5 CEDLO7025 Legal Aspects in constructions
6 CEDLO7026 Environmental impact assessment
7 CEDLO7027 Advance d Steel Structures
Institute Level Optional Course – I
Sr. No. Course Code
CEILO701X Institute Level Optional Course – I
1 CEILO7011
2 CEILO7012
Page 16
3 CEILO7013
Undergraduate Program Structure for Final year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2022 -2023 )
Semester VI II
Course
Code Course Name Teaching Scheme
(Contact Hours) Credit Assigned
Theory Pract. Tut. Theory Pract. Tut. Total
CEC801 Construction Management 03 - - 03 - - 03
CEDLO801X Department Level Optional
Course – 5 03 - - 03 - - 03
CEDLO802X Department Level Optional
Course – 6 03 - - 03 - - 03
CEILO801X Institute Level Optional
Course – 2 03 - - 03 - - 03
CEL801 Construction Management - 02 - - 01 - 01
CEP801 Major Project – II - 12$ - - 06 - 06
Total 12 14 - 12 07 - 19
Examination Scheme
Course Code Course Name Internal
Assessment End
Sem
Exam Exam
Duration
(Hrs.) Term
Work Pract.
/Oral Total Test
- I Test
– II Avg.
CEC801 Construction Management 20 20 20 80 03 - - 100
CEDLO801X Department Level Optional
Course – 5 20 20 20 80 03 - - 100
CEDLO802X Department Level Optional
Course – 6 20 20 20 80 03 - - 100
CEILO801X Institute Level Optional
Course – 2 20 20 20 80 03 - - 100
CEL801 Construction Management - - - - - 25 25 50
CEP801 Major Project – II - - - - - 50 100 150
Total 80 320 - 75 125 600
$ indicates work load of Learner (Not Faculty), for Major Project.
Page 17
Undergraduate Program Structure for Final year Civil Engineering
University of Mumbai
(With Effect from A.Y. 2022 -2023 )
Semester VIII
Department Level Optional Course – 5
Sr. No. Course Code
CEDLO801X Department Level Optional Course – 5
1 CEDLO8011 Bridge Engineering
2 CEDLO8012 Design of Hydraulics Structures
4 CEDLO801 3 Construction Safety
5 CEDLO801 4 Pavement Design
6 CEDLO801 5 Industrial Waste Treatment
7 CEDLO801 6 Soil Dynamics
Department Level Optional Course – 6
Sr. No. Course Code
CEDLO802X Department Level Optional Course – 6
1 CEDLO8021 Repairs , Rehabilitation and Retrofitting of structures
2 CEDLO8022 Physio -Chemical Properties of Waste And Sewage Water
3 CEDLO8023 Transportation System Engineering
4 CEDLO8024 Smart Building Materials
5 CEDLO8025 Structural Dynamics
6 CEDLO8026 Ground Water Engineering
Institute Level Optional Course -2
Sr. No. Course Code
CEILO801X Institute Level Optional Course -2
Page 18
1 CEILO8011
2 CEILO8012
3 CEILO8013
Faculty may design and conduct practical s for elective subjects wherever possible , under the head
‘content beyond syllabus ’.
Page 19
Semester V
Page 20
Semester -V
Course Code Course Name Credits
CEC501 Theory of Reinforced Concrete Structures 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Working Stress Method (WSM) makes use of the concept of modular ratio based on the higher
factor of safety in evaluating the stresses in two different materials of the RCC i.e., steel and
concrete. The Limit State Method (LSM) is based on the statistical p robability which provides
the rational solution to the design problems. The philosophy which lies behind, LSM uses
multiple safety factors format which attempts to provide adequate safety at the ultimate load
as well as adequate serviceability at service l oad by considering all possible limit states. The
subject involves the application of working stress method and limit state method in the analysis
and design of various elements of the civil engineering structures.
Objectives
1 To develop clear understanding of design philosophy amongst the students for the design
of reinforced concrete structure using working stress method (WSM) and limit state
method (LSM).
2 To study various clauses of IS: 456 -2000 and their significance in the RCC design.
3 To apply various concepts of LSM in the analysis and design of beams, slabs and columns.
4 To study the concept of Serviceability and Durability for deflection and crack width
calculation in RCC structures.
5 To develop the concept of design using design charts and curves for columns subjected to
axial load and moment.
6 To study the concept of reinforced concrete footing design subjected to axial load and
moment.
Page 21
Detailed Syllabus
Module Course Module / Contents Periods
1 Working Stress Method :
06 1.1 Concept of reinforced concrete, Working Stress Method
(WSM) of design for reinforced concrete, permissible stresses
as per IS:456 -2000; stress - strain curve of concrete and steel,
characteristics of concrete and steel reinforcement.
1.2 Concept of balanced, under reinforced and over reinforced
sections.
1.3 Analysis and design of singly reinforced and doubly reinforced
rectangular beams for Flexure.
2 Limit State Method :
03 2.1 Introduction to limit state method of design as per IS:456 -2000.
2.2 Concepts of probability and reliability, characteristic load,
characteristic strength, partial safety factors for loads and
materials, introduction to various limit states of collapse and
serviceability.
3 Limit State of Collapse: Flexure, Shear, Bond and Torsion :
12 3.1 Design of singly and doubly reinforced Rectangular and
Flanged sections for flexure, shear and bond.
3.2 Design of beams subjected to bending, shear and torsion.
4 Design of Slabs using L imit state method:
04 4.1 Design of simply supported one -way slabs as per IS:456 -2000.
4.2 Design of simply supported two -way slabs as per IS:456 -2000.
5 Limit State of Collapse – Compression :
08 5.1 Limit state of collapse: compression for short and slender
column.
5.2 Introduction to Members subjected to combined axial and
uniaxial as well as biaxial bending.
5.3 Development of interactive curves and their use in column
design.
6 Design of Foundations :
06 6.1 Design of Isolated square and rectangular footings subjected to
axial load and moment.
6.2 Introduction to basic concepts of combined rectangular pad
footing, slab beam type footing and Raft foundation.
Total 39
Page 22
Contribution to Outcome
On completion of this course, the students will be able to:
1. Understand the fundamentals of WSM and LSM.
2. Apply various clauses specified in IS: 456 -2000 for designing structural members with
safety and economy.
3. Understand the use of readymade design charts and curves from Special Publications
of Bureau of Indian Standards.
4. Analyze and design various reinforced concrete elements such as beam, slab, column,
footings using the concept of Limit State Method.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining
contents (approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1. Use of IS:456 -2000 shall be allowed in the examination.
2. Question paper will comprise of total six questions, each carrying 20 marks.
3. Question 1 will be compulsory and should cover maximum contents of the curriculum.
4. Remaining questions will be mixed in nature (for example if Q.2 has par t (a) from
module 3 then part (b) will be from any module other than module 3).
5. Four questions need to be solved in total.
Recommended Books:
1. Design of Reinforced Concrete Structures: Dayaratnam, P; Oxford and IBH.
2. Limit State Design of Reinforced Concrete: Jain A. K, Nemchand and Bros., Roorkee
3. Limit State Design of Reinforced Concrete: Shah and Karve, Structure Publications,
Pune.
4. Ultimate Strength Design for Structural Concrete: Arthur, P. D. and Ramakrishnan, V.,
Wheeler and C o. Pvt. Ltd.
5. Reinforced Concrete: H.J. Shah, Charotar Publishers, Anand.
6. Fundamentals of Reinforced Concrete: Sinha & Roy, S. Chand and Co. Ltd.
7. Illustrated Reinforced Concrete Design: Dr. V. L. Shah and Dr. S. R. Karve, Structure
Publications, Pune.
8. Reinforced Concrete Design: Wang, C. K., Salmon, C. G., and Pincheira, J. A, John
Wiley (2007), 7th Edition.
9. Reinforced Concrete Fundamentals: Ferguson, P. M., Breen, J. E., and Jirsa, J. O.,
John Wiley & Sons (1988) 5th Edition.
Page 23
Reference Books:
1. Design of RCC structural Elements (RCC Vol -I): Bhavikatti, S. S., New Age
International Publications.
2. Reinforced Concrete: Syal and Goel; Wheeler Publishers.
3. Reinforced Concrete Design: Pillai, S.U. and Menon, Devdas, Tata Mc -Graw Hill
Publishing House, New Delhi.
4. Reinforced Concrete Design by S.N. Sinha, Tata Mc -Graw Hill Publishing House, New
Delhi
5. Theory of Reinforced concrete structures by N. Subramanian, Oxford University Press.
6. RCC Design (WSM and LSM): Punmia, B. C., Jain, A. K., and Jain, Arun, K., Laxmi
Publications.
7. Limit State Design of Reinforced Concrete (as per IS: 456 -2000): Punmia, B. C., Jain,
A. K., and Jain, Arun, K., Laxmi Publications.
8. Relevant IS Codes: BIS Publications, New Delhi.
Page 24
Semester -V
Course Code Course Name Credits
CEC50 2 Applied Hydraulics 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
The knowledge of this course is essential to understand facts, concepts of impact of jets,
Miscellaneous Hydraulic Machinery . Further it helps to understand the design aspects,
components, function and uses of centrifugal pump, turbines . It also helps to study the concept
of uniform Flow Through Open Channels , Non-Uniform Flow Through Open Channels .
Objectives
The students will be able to learn:
1 To introduce the concept of impact of jets.
2 To study hydraulic machines like centrifugal pumps and turbines .
3 To study various Miscellaneous Hydraulic Machinery.
4 To study the uniform flow through open channels and design of most economical section.
5 To study the non -uniform flow through open channels .
Page 25
Detailed Syllabus
Module Course Module / Contents Periods
1 Impact of Jets
07 Impulse momentum principle, Jet striking flat plates, stationary and
moving vertical, inclined plates, hinged plates, curved vanes, series of
plates and vanes mounted on wheel, concept of velocity triangles.
2 Hydraulic Turbines
08 General layout of hydro -electric plant, heads, efficiencies of turbine,
classification, concept of velocity triangles working of Impulse
Turbine (Pelton Wheel), Reaction Turbine, Francis Turbine, Kaplan
Turbine, draft tube theory, specific speed, unit quantities,
Characteristic curves, Cavitation.
3 Centrifugal Pumps
04 Work done, heads, efficiencies, Minimum speed: series parallel
operation, Multistage pumps, concept of velocity triangles, specific
speed, model testing, priming, characteristic curves, NPSH, cavitation.
4 Miscellaneous Hydraulic Machinery
03
Hydraulic Ram, Press, Accumulator, Intensifier, Crane and Lift.
5 Uniform Flow Through Open Channels
07 Uniform Flow: Flow through open channel: Definition, types of
channels, Prismatic, non -prismatic channels, Types of flows in
channels, Uniform flow: steady flow and unsteady flow, laminar and
turbulent flow, subcritical flow, supercritical flow, Chezy’s fo rmula,
Manning’s formula, hydraulically efficient channel cross -sections
(most economical sections).
6 Non-Uniform Flow Through Open Channels
10 Concept of Specific energy and specific energy curve, Dimensionless
specific energy discharge curve, applications of specific energy and
Momentum principle to open channel flow, specific force. Gradually
varied flow, equation for gradually varied flow, back water curve and
afflux, Introduction to surface profiles, Hydraulic jump and standing
wave.
Total 39
Page 26
Contribution to Outcome
On completion of this course, the students will be able to:
1 Describe impact of jet on stationary, moving, hinged and series of plates also solve the
numerical based on forces acting on it .
2 Distinguish various types of turbines, Characteristic curves and its components .
3 Analyze Centrifugal pumps by incorporating velocity tri angle diagrams.
4 Know the working mechanism of various Hydraulic machines .
5 Identify the hydraulic behaviour of open channel flow and design the most economical
section of channels.
6 Explain mathematical relationships for hydraulic jumps, surges, and critical, uniform,
and gradually -varying flows .
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only f our questions need to be solved in total.
Recommended Books:
1 Hydraulics and Fluid mechanics: Dr. P.M. Modi and Dr. S.M. Seth, Standard Book
House, Delhi .
2 Theory and Application of Fluid Mechanics: K. Subramanian, Tata McGraw hill
publishing company, New Delhi.
3 Fluid Mechanics: Dr. A.K Jain, Khanna Publishers .
4 Fluid Mechanics and Hydraulics: Dr. S.K. Ukarande, Ane’s Books Pvt. Ltd. (Revised
Edition 2012), ISBN 97893 8116 2538 .
5 Fluid Mechanics and fluid pressure engineering: Dr. D.S. Kumar, F.K. Kataria and
sons.
6 Fluid Mechanics: R.K. Bansal Laxmi Publications (P) Ltd .
7 Flow through open channels, K.G. Ranga Raju. (1993) : New Delhi : Tata
McGrawHill, c1993 .
8 Flow Through Open Channels. Rajesh Srivastava (2007): Oxford University Press,
2007, pbk, 432 p, ISBN: 0195690385 .
Page 27
Reference Books:
1 Fluid Mechanics: Frank M. White, Tata Mc -Graw Hill International Edition .
2 Fluid Mechanics: Streeter White Bedford, Tata Mc -Graw International Edition .
3 Fluid Mechanics with Engineering Applications: R.L. Daugherty, J.B. Franzini, E.J.
Finnemore, Tata Mc -Graw Hill, New Delhi .
4 Hydraulics: James F. Cruise, Vijay P. Singh and Mohsen M. Sherif, CENGAGE
Learning India (Pvt.) Ltd.
5 Introduction to Fluid Mec hanics: Edward J. Shaughnessy, Jr, Ira M. Katz, James P.
Schaffer. Oxford Higher Education .
6 Open channel Hydraulics: Chow, V.T., McGraw Hill International, New York.
7 Open Channel Flow: Henderson F.M., McGraw Hill International, New York.
Page 28
Semester -V
Course Code Course Name Credits
CEC503 Geotechnical Engineering -I 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Around all civil engineering structures are supported by soil and rock. Rock is rarely occurring
and hence, mostly the supporting medium is soil. The stability of structure depends on the
stability of supporting medium. Therefore, geotechnical analysis is required to be carried out.
Geotechnical analysis depends on the b asic understanding of physical properties of soil which
are useful for determining the strength, compressibility, drainage characteristics etc. Soil
mechanics is the basic tool for geotechnical engineering, which is the specialized section of
civil enginee ring. Soil is also used as a construction material to build various civil structures,
viz., dams, embankment etc. Thus, it is very essential to understand various concepts involved
in this course of Geotechnical Engineering -I.
Objectives
1 To study origin and mode of formation of soil as well as functional relationships among
different unit weights, volumetric ratios, and water content.
2 To study clay mineralogy and plasticity characteristics of soils.
3 To comprehend particle size distribution and classification of soils as per IS code .
4 To study permeability and seepage flow of water through the soil .
5 To understand the concept of total stress, neutral stress and effective stress in soil .
6 To understand compaction characteris tics of soils as well as the techniques of soil
exploration, assessing the subsoil conditions and engineering properties of various soil
strata .
Page 29
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction to Geotechnical Engineering, Basic Definitions &
Relationships
07 1.1 Definitions and scope of Geotechnical Engineering: rocks, soil,
origin & mode of formation and types of soil obtained, soil
mechanics, rock mechanics, geotechnical engineering .
1.2 Soil phase systems, volumetric ratios: void ratio, porosity,
degree of saturation, air voids, air content .
1.3 Weight -volume relationship: different unit weights, water
content, specific gravity of soil solids, mass and absolute
specific gravity.
1.4 Functional relationships among different unit weights,
volumetric ratios, and water content.
1.5 Relative density, relative compaction.
1.6 Different methods to determine water content, specific gravity
and unit weight of soil.
2 Clay Mineralogy and Plasticity Characteristics of Soils
06 2.1 Explanation about clay minerals, e.g., Montmorillonite, Illite
and Kaolinite; formation of clay minerals and their role in
plastic behavior of soil.
2.2 Definition of plasticity of soil, consistency of soil, definition &
determination of liquid limit, plastic limit, shrinkage limit.
2.3 Definitions of shrinkage parameters, plasticity index, liquidity
index, consistency index, flow index, toughness index, activity,
sensitivity and thixotropy of soil. Importance of consistency
limits.
3 Particle Size Distribution and Classification of Soils
06 3.1 Wet & dry sieve analysis, Sedimentation analysis: Stoke’s law,
Hydrometer method of analysis, Limitation of sedimentation
analysis.
3.2 Particle size distribution curve/ gradation curve and its uses.
Introduction to cohesive and cohesionless soil.
3.3 Necessity of soil classification, Indian standard particle size
classification, Indian standard soil classification system as per
IS: 1498 -1970, boundary classification.
4 Permeability of Soils & Seepage Analysis
08 4.1 Types of soil water, definition of hydraulic head, hydraulic
gradient, Darcy’s law, validity of Darcy’s law, permeability of
soil.
4.2 Determination of coefficient of permeability of soil in lab using
constant head and variable head methods, factors affecting
permeability of soil, effect of permeability on various properties
of soil, determination of in -situ permeability with pumping out
and pumping in tests.
Page 30
4.3 Permeability of stratified soil deposits.
4.4 Definition of seepage and its importance for the analysis &
design of hydraulic structures, graphical representation of
seepage by flow net diagram, definition of flow line,
equipotential line, flow channel, flow field, characteristics of
flow net, use of flow net, phreatic line.
4.5 Factor of safety against piping failure.
5 Effective Stress Principle
05 5.1 Definition of geostatic stresses, total stress, neutral stress/ pore
water pressure, effective stress.
5.2 Effect of water table fluctuations, surcharge, capillary action,
seepage pressure on effective stress; quick sand condition.
6 Compaction of Soil & Soil Exploration
07 6.1 Theory of compaction, determination of optimum moisture
content (OMC) & maximum dry density (MDD) in laboratory
by conducting the light and heavy compaction tests.
6.2 Factors affecting the compaction, effect of compaction on
properties of soil, soil structure, placement water content,
relative compaction, Proctor needle method for compaction.
6.3 Necessity of soil exploration, methods of soil investigation,
methods of boring, disturbed and undisturbed soil samples, soil
sampling and samplers, number and spacing of bore holes,
depth of bore holes.
6.4 Penetrometer tests: SPT, SCPT and DCPT.
6.5 Representation of data with borehole logs.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Explain the basic concepts of the physical and engineering properties of soil and derive
the relationships among various unit weights & other parameters.
2 Comprehend clay mineralogy and plasticity behavior of clay.
3 Analyze grain size distribution of soil and classify the soil as per IS code.
4 Evaluate the coefficient of permeability of different types of soils and draw the flow
net diagram to estimate seepage discharge.
5 Compute the effective stress and pore water pressure inside the soil mass under
different geotechnical conditions.
6 Evaluate the compaction parameters in laboratory and field as well as understand the
necessity and methods of soil exploration.
Page 31
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only f our questions need to be solved in total.
Recommended Books:
1 Basic and Applied Soil Mechanics: Gopal Ranjan, A S R Rao; New Age International
Publishers.
2 Soil Mechanics and Foundation Engineering: V. N. S. Murthy; CBS Publishers &
Distributors
3 Soil Mechanics and Foundation Engineering: K. R. Arora; Standard Publishers and
Distributors, New Delhi.
4 Soil Mechanics and Foundations: B. C. Punmia, Ashok Kumar Jain, Arun Kumar Jain;
Laxmi Publications (P) LTD., New Delhi
5 Geotechnical Engineering: C. Venkatramaiah; New Age International Private Limited
6 Fundamentals of Soil Engineering: D. W. Taylor; John Wiley & Sons .
Reference Books:
1 An Introduction to Geotechnical Engineering: Robert D. Holtz, William D. Kovacs;
Prentice -Hall, New Jersey
2 Soil Mechanics: R. F. Craig; Spon Press, Taylor and Fransis Group
3 Soil Mechanics: T. W. Lambe, R. V. Whitman; John Wiley & Sons
4 Relevant Indian Standard Specifications Codes, BIS Publications, New Delhi
5 Soil Mechanics in Engineering Practice: Karl Terzaghi, Ralph B Peck, Gholamreza
Mesri; John Wiley & Sons
Page 32
Semester -V
Course Code Course Name Credits
CEC504 Transportation Engineering 04
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
04 - - 04 - - 04
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
An efficient transportation system is essential for sustainable economic development of the
country and plays a significant role in promoting national and global integration. An efficient
Transportation system helps in increasing productivity and enhances competitiveness of the
economy. Hence, the transport sector is considered as an important component of the economy
and a common tool used for development. Three basic modes of transportation include land,
water and air. The course deals with understanding of basics of different modes of
transportation (Highways, railways, airways and waterways). The highways owing to its
flexibility in catering door -to- door service is one of the important modes. This course deals
with t he investigation, planning, design, construction and maintenance of highways in addition
to traffic planning, operation and control.
Objectives
1 To understand the technical aspects of Railways, Airways and Waterways.
2 To carry out Planning and design of geometric elements of Highways.
3 To study various traffic studies and to understand elements of Traffic Engineering for
efficient planning and control.
4 To study Requirements of Highway materials and to design Rigid and flexible pavements
using IRC codes.
5 To study methods of construction of Rigid and Flexible pavements, use of soil
stabilization and drainage to highways.
6 To design the overlay on basis of pavement evaluation and failure identification on rigid
and flexible pavements.
Page 33
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction to Transportation Systems
10 1.1 Introduction to Transportation Engineering, Comparison of
various modes of transportation (Roadways, Railways, Airways
and Waterways) .
1.2 Introduction to Railway Engineering: Cross sectional elements
of railway track (Foundation, Ballast, Sleepers and Rail),
Introduction to turnout, Super elevation design, Negative Super
elevation, Construction and Maintenance of Railway track.
1.3 Introduction to Airport Engineering: Elements of Airport, Site
selection of Airport, Design of Runway length, Taxiway and
Exit Taxiway design.
1.4 Introduction to Waterways: Definition of Docks, Harbor and
Ports. Elements and types of Docks, Harbor and Port.
2 Planning and Geometric Design of Highways
10 2.1 Classification of roads based on various criteria, Road
development plans, agencies related to highway development,
Highway alignment (basic requirement and factors governing),
hill roads, Surveys for highway location.
2.2 Terrain Classification, Vehicular Characteristics, Cross section
elements of highways (width of carriage way, shoulders,
medians, width of road way, right of way, camber & its profile).
2.3 Design speed, sight distance, perception time, break reaction
time, analysis of safe sight distance, analysis of overtaking sight
distance, intersection sight distance.
2.4 Horizontal curves: design of super elevation, its provisions,
minimum radius of horizontal curves, widening of pavement,
transition curves.
2.5 Gradients: different types, maximum, minimum, ruling
exceptional, grade compensation on curves.
3 Traffic Engineering
10 3.1 Introduction to various traffic studies such as speed study,
volume study, parking study, accident study, O&D study etc.
Speed study: methods to determine speed, types of speed (Spot
speed, Design speed, Upper & lower limit speeds, Mean -
Median and Modal speed);
Traffic Volume study (flow): Definition, AADT, ADT, Design
volume, methods of determining traffic volume.
Traffi c density: Definition, importance.
3.2 Introduction to Relationship between Speed, density and
volume. Capacity: Q -K-V curve, Different types and factors
affecting capacity, Concept of PCU and LOS.
3.3 Introduction to traffic control devices Traffic signs, signals (no
design), road marking.
Page 34
3.4 Different types of Intersections -At-grade and Grade Separated;
Grade separated interchanges; rotary intersection.
4 Pavement Material and Design
12 4.1 Types of pavements, comparison of flexible and rigid
pavements, Requirements of pavement materials,
Soil: requirement of soils as subgrade material, CBR test.
Aggregate: Requirements of aggregate as Pavement material,
Tests on aggregate with specified val ues.
Bitumen: Requirements of bitumen as pavement material test
on bitumen with specified values, variants of bitumen
(Modified bitumen) and its uses.
Introduction to Bituminous mix design using Marshall Stability
test.
4.2 Flexible pavement design: Concepts related to flexible
pavement design such as tyre pressure, contact pressure, ESWL,
VDF and LDF. IRC approach for design (IRC: 37 - 2001, IRC:
37- 2012), also IRC SP 72 -2007/2015 and IRC 77 2008.
4.3 Rigid pavement design: Modulus of subgrade reaction,
equivalent radius of resisting section, radius of relative stiffness,
stresses on rigid pavement, combine loading temperature
stress.; Design of rigid pavements (IRC: 58 - 2002; IRC: 58 -
2011, IRC: 58 - 2015. IR C: SP - 62-2004, IRC: SP - 62-2014)
5 Pavement Construction, Soil Stabilization and Drainage
05 5.1 Construction of different types of roads: water bound macadam
(WBM) road, WMM, bituminous pavements, cement concrete
pavement. And joint (As per IRC, MORTH specifications)
jointed reinforced, continuously reinforced; fiber reinforced;
roller compacted concrete pavements.
5.2 Soil Stabilization : Significance, Principle of soil stabilization,
different methods of soil Stabilization , use of Geosynthetics in
highways and allied structures.
5.3 Highway drainage: Necessity/ Significance, mode of ingress of
water in highway structure, Different methods of drainage -
surface and subsurface drainage inkling for the roads in hilly
areas.
6 Pavement Evaluation, Failures and Maintenance
05 6.1 Evaluation of pavement, Structural and functional evaluation,
methods of structural evaluation (working of Benkelman beam,
FWD, LWD), methods of functional evaluation (working of
Bump indicator, profilometric systems)
6.2 Distress / failure in Rigid and flexible pavement, reasons and
measures.
6.3 Strengthening of existing pavement, Overlay and its types,
design of overlay (Benkelman beam method)
Total 52
Page 35
Contribution to Outcome
On completion of this course, the students will be able to:
1 Compare various modes of transportation and understand basic technical aspects of
railways, airways and waterways.
2 Understand different road plans, requirements of alignments and Design horizontal and
vertical geometrical elements of highways.
3 Carry out different traffic studies and analyze basic parameters of traffic engineering
for efficient planning and control of traffic.
4 Design the flexible and rigid pavement as per relevant IRC codes.
5 Construct different types of pavements, use of soil stabilization and planning of
highway drainage.
6 Carry out structural and functional evaluation of pavement, identify the failures and
design the overlay.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions wil l be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only four questions need to be solved in total.
Recommended Books:
1 A Course of Railway Engineering: Saxena, S. C. and Arora, S. P.; Dhanpat Rai Sons,
New Delhi.
2 Airport Planning Design: Khanna, S.K., Arora, M.G.and Jain, J.J.;Nemchand Bros.,
Roorkee.
3 Docks and Harbour Engineering: Bindra, S. P.; Dhanpat Rai and Sons,New Delhi.
4 Highway Engineering: Khanna, S.K. and Justo, C. E. G.; Nem Chand and Bros.,
Roorkee.
5 Principles, Practice and Design of Highway Engineering (Including Airport
Engineering)” Sharma, S.K.; S. Chand and Company Pvt. Ltd., New Delhi .
6 Highway Material and Pavement Testing: Dr. S. K. Khanna, Dr. C. E. G. Justo and Dr.
A. Veeraragavan. Nem Chand and Bros., Roorkee, India.
Page 36
Reference Books:
1 Indian Railway Track: Agarwal, M. M., Suchdeva Press New Delhi.
2 Planning Design of Airport: Horonjeff Mckelrey , Tata Mc -Graw Hill India Publishing
House, New Delhi.
3 Design and Construction of Ports and Marine Structures: Quinn, A. D., Tata Mc -Graw
Hill India Publishing House.
4 Transportation Engineering and Planning: C.S. Papacostas and P.D. Prevedouros;
Prentice Hall India Learning Pvt. Ltd., New Delhi .
5 Principles of Transportation Engineering: Chakrabory, Partha and Das, Animesh;
Prentice Hall India Learning Pvt. Ltd., New Delhi.
6 Transportation Engineering: Khisty, C.J. and Lall, Kent, B.; Prentice Hall India
Learning Pvt. Ltd., New Delhi.
7 Traffic Engineering and Transport Planning: Kadiyali, L.R., Khanna Publishers, Delhi.
8 Principles and Practice of Highway Engineering: Kadiyali, L. R.; Khanna Publsihers,
Delhi.
9 Relevant specifications of MORTH and relevant IRC codes.
Page 37
Semester -V
Course Code Course Name Credits
CEDLO5011 Department Level Optional Course - 1
Modern Surveying Instruments and Techniques 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Revolutionary changes have taken place in the last few years in surveying instruments and
techniques that are used for measuring level differences, distances, angles, areas, volumes, etc.
This has become possible due to the advent of electronics in the surveying instruments. With
rapid advancements in the technology and availability of cheaper and innovative electronic
components, these instruments have become affordable and user friendly.
This course outlines the advancements in instruments and techniques such as digital levels,
electronic distance measuring instruments, electronic theodolites, total stations, GPS, GIS,
Remote Sensing, drone survey, aerial photogrammetry and hydrographic survey. It also makes
the learner industry -ready with respect to the applications of the modern tools in data capturing
and further in mapping using appropriate software.
Objectives
1 Understand the working principles and methodologies of modern surveying instruments
and compare with conventional instruments.
2 Exhibit the concepts of Global Positioning System, Geographical Information system
and remote sensing techniques.
3 Demonstrate the importance of Aerial photogrammetry in surveying works,
4 Develop recent methods of maintaining land records,
5 Study the art of delineating the levels underwater bodies.
6 Highlight the modern techniques in the field of surveying and mapping using various
software s.
Page 38
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction to Modern Surveying Instruments:
06 1.1 Principles governing modern instruments and comparison with
the conventional instruments.
1.2 E.D.M. Electromagnetic spectrum, Electromagnetic distance
measurement, Instruments – Digital planimeter, Auto Level,
Laser Level, Electronic Digital Theodolite, Total Station, Scan
station, Smart Station (Total station with GPS).
2 Geoinformatics
12 2.1 Global Positioning System - Global Positioning System –
working principle and methods, Different Approaches to use
GPS and their accuracies, Advantages of GPS in Navigation,
Survey, Planning and Mapping.
2.2 Geographical Information System -Introduction, Definition,
Objectives, Components (people, procedure, hardware,
software & data) & functions (input, manipulation,
management, query & analysis and visualization) of GIS.
Coordinate systems and projections, Geo -referencing, GIS data
– spatial (Raster & vector) & spatial data. Introduction to
vector and raster data analysis such as network analysis, overlay
analysis etc. for vector, DEM, Management of a spatial data.
2.3 Remote Sensing introduction, Definition, Necessity,
Importance and use; Basic concepts in Remote Sensing, Basic
Laws of electromagnetic radiation, Atmospheric effects on
radiation, Interaction of EM energy with matter, Resolution in
remote sensing, Satellite remote sensing, Problems confronting
remote sensing system. Ideal and Real remote sensing systems.
3 Aerial Photogrammetry
06 3.1 Introduction, principle and uses of Aerial photographs,
Definitions, of different terms, Scale of vertical and tilted
photograph (simple problems), Ground Coordinates.
3.2 Relief Displacements, Ground control, Procedure of aerial
survey, overlaps and mosaics, Stereoscopes
4 Cadastral Surveying
04 4.1 Cadastral Surveying: Contemporary Techniques of maintaining
survey records, 7 -12 Extracts, Form -8 (Namuna -8).
4.2 Role of Survey Department, Role of revenue department.
Soft/digitized formats of land records, Comparison with
conventional record keeping
5 Hydrographic Surv eying
04
5.1 Hydrographic Surveying: Objects, Applications, establishing
controls, Shore line survey, Sounding, sounding equipment,
Methods of locating soundings – conventional and using GPS.
Page 39
5.2 Reduction of soundings, Plotting of soundings, Nautical sextant
and its use, Tides and tide gauges, determination of MSL.
6 Applications of Modern Survey Techniques and Map Preparation
Using Software
07 6.1 Applications of Total Station, GIS, GPS, Remote sensing,
LIDAR, Drones in Civil Engineering.
6.2 Introduction of GRAM++, Q -GIS, Map Info etc.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Compare modern surveying instruments with conventional instruments.
2 Elucidate the utility of geoinformatics in surveying data collection and analysis.
3 Explain the utility of Aerial photogrammetry in surveying works.
4 Highlight the improvement in land record keeping and governance using modern tools.
5 Describe the procedure of hydrographic surveying and mapping.
6 Apply modern surveying tools to solve complex problems and demonstrate essential
skills for working on surveying software.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only four que stions need to be solved in total.
Page 40
Recommended Books:
1 Agor R, Advanced Surveying, Khanna Publishers, New Delhi (ISBN9788174909053).
2 Kanetkar , T.P. and Kulkarni, S.V., Surveying and Levelling Vol. II, Pune Vidhyarthi
Gruh Publication (ISBN9782508807185).
3 Arora, K.R., Surveying Vol. III, Standard Book House. New Delhi
(ISBN9788189401276).
4 Basudeb Bhatta, Remote Sensing and GIS, Third Editi on, Oxford University Press, New
Delhi. ISBN: 9780199496648
5 B. C. Punmia, Ashok K Jain, Arun K Jain, Advance Surveying, Laxmi Publications
(ISBN 9788170088530)
6 R. Subramanian, Surveying and levelling, Oxford University Press, New Delhi
(ISBN9780198085423)
7 P.Dong , Q.Chen, Lidar Remote Sensing and applications ,CRC Press (ISBN
9781138747241)
Reference Books:
1 Basudeb Bhatta , Remote Sensing and GIS, Third Edition, Oxford University Press, New
Delhi. ISBN: 9780199496648
2 T.M Lillesand, R.W Kiefer, and J.W Chipman, Remote sensing and Image
interpretation, 5th edition, John Wiley and Sons, India; ISBN: 978 -1-118-34328 -9
3 Kaplan E.D and Hegarty C.J., Understanding GPS: principles and applications, Artech
House (ISBN978 -1-63081 -058-0)
4 Wolf P.R. and Dewitt B.A., Elements of Photogrammetry, McGraw Hill,(ISBN 978 -
0072924541)
5 DeMers M.N., Fundamentals of GIS, John Wiley (ISBN978 -0470129067)
6 Gibson P.J., Introductory Remote Sensing: Principles and Concepts, Routledge (ISBN0
415 18962 4).
Page 41
Semester -V
Course Code Course Name Credits
CEDLO5012 Department Level Optional Course - 1
Building Services and Repairs 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
The building services are based on engineering operations of buildings & the built
environment. Building services are responsible for the environment in which we live & work.
Building service systems are complex. They are typically a major source of cost & pot ential
problems in building service conditions. Fundamental knowledge of how mechanical,
electrical, plumbing & other systems work & interact is important to the construction
professionals. This course provides an introduction to building service systems w hich include
the study of design, interfaces & specifications of various building services in buildings. For
an existing building, it is necessary to be in a good condition to perform the intended functions.
Adequate maintenance extends the building life & ensures the safety of occupants. Most of the
structures are getting old & are in the dire need of the repair and maintenance. Hence, there is
a huge employment potential in conformity with the field of repair and maintenance. This
course, therefore, finds its place in the curriculum such that the pupils can acquire the
competency in this area. The course deals with the different building services, health
monitoring of buildings, their maintenance, repair materials and repair methodologies.
Objectives
1 To understand the concepts of mechanical systems in buildings such as lifts, escalators,
HVAC systems, pumps & their applications.
2 To understand design concepts of electrical system, safety and illumination
fundamentals.
Page 42
3 To get familiar with the plumbing system and services in buildings related to water
supply, drainage, gas supply and firefighting installations.
4 To learn about causes of distress of concrete structures and learn various instrumental
testing methods for Condition assessment & evaluation of structure and assess the
extent of repairs.
5 To acquire the knowledge of repair materials and repair methodologies for
rehabilitation of RCC structures.
6 To learn implementing repair process and to follow safety d uring construction work.
Detailed Syllabus
Module Course Module / Contents Periods
1 Building services: Mechanical systems.
06 1.1 Lifts/elevators, escalators, conveyors: their components,
capacity and principles of working, common problems. (3L)
1.2 Motors, Generators, Pumps, HVAC Systems - Heating systems,
Cooling Systems, Packaged HVAC, types, capacity,
components and their principles of working, common
problems. (3L)
2 Building services: Electrical systems & Illumination in Buildings
07 2.1 Electrical grids and supply system: Layout of substations
Transformers & switch gears, Main & distribution boards,
electrical systems in buildings, Single / Three phase supply, ISI
specifications, electrical load, electrical layout plan in a
building, Type s of wires, wiring system & their choice, Solar
energy, CCTV, LAN.
Protective devices in electrical installation: Earthing for safety,
Types of Earthing, fuses, circuit breakers, lightening
arrester. (4L)
2.2 Principles of Illumination Design: Visual tas k, Factors affecting
visual task, Luminous flux, candela, solid angle illumination,
utilization factor.
Modern theory of light &color: Synthesis of Light, Additive &
Subtractive synthesis of colour, classification of lighting,
artificial lights sources, sp ectral energy distribution, luminous
efficiency, color temperature, colour rendering.
Level of illumination: Lighting for stores, offices, school,
hospitals and house lighting, elementary idea of special features
required and minimum level of illumination required in
buildings. (3L)
3 Building services: Plumbing Systems in Building
06
3.1 Water Distribution system: Material for service pipes, service
connection, size of service pipe, Water meter, valves and
storage tanks, water requirement for domestic use and
firefighting. (2L)
Page 43
3.2 Drainage system: Pipe and traps, system of plumbing, house
drainage plans, Chambers - gradient and spacing, manholes,
septic tanks and soak pit, Introduction to rain water harvesting
system. (2L)
3.3 Other plumbing systems: Fire safety, fire -fighting inst allations,
types and purpose, piped gas supply systems, AC ducting. (2L)
4 Deterioration of Concrete Structures & Condition assessment
06 4.1 Durability & Causes of deterioration of concrete structures:
effects of climate, moisture, temperature, chemical, wear,
erosion & loading on serviceability & durability. Design errors
& construction errors, causes of seepage & leakage in concrete
structures, formation of cra cks including those due to
corrosion. (2L)
4.2 Condition Survey, Evaluation & Damage Assessment:
Structural audit and bye laws. Diagnostic methods & analysis.
Destructive, semi -destructive and non -destructive methods:
core test, carbonation test, chloride test, petrography, corrosion
analysis, cover me ter test, rebound hammer test, ultrasonic
pulse velocity test, and crack measurement techniques,
Concrete endoscopy & thermal imaging, pull - off test & pull -
out test. (4L)
5 Repair Materials & Methodologies For Repairs
08 5.1 Repair analysis, Repair materials: and their desired properties,
Polymer modified mortar/ concrete, micro concrete, bonding
chemicals, protective materials and their properties for moisture
barrier systems, water -proofing of concrete structures, Systems
like integral, crystalline, coatings, membranes, joints sealants,
crack repair fillers, corrosion resistant steels, Pre -packed zinc
sacrificial anode, Snap -On zinc mesh anode CP system,
corrosion inhibitors, rust solvents. (4L)
5.2 Repair methodologies: Cr ack and patch repair, Injection
grouting, surface coatings, column jacketing, guniting,
shotcrete, Ferroconcrete, FRP, Carbon fiber wrapping, methods
of rebar corrosion protection, cathodic protection. (4L)
6 Repair Process Implementation and Safety Durin g Repairs
06 6.1 Legal Documentation and Records: Estimates of repair work,
procedure and flow chart for repairs, Bill of quantities,
Tendering, Work order, Agreement and Contract, Measurement
book, bills, security deposits, role of PMC. (3L)
6.2 Safety during Repairs: Causes of accidents, safety signs,
barricading, insurance, Temporary Support structures such as,
formwork, shuttering, centering, staging and scaffolding. (3L)
Total 39
Page 44
Contribution to Outcome
On completion of this course, the students will be able to:
1 Apply the knowledge of working & installation of mechanical utility services in
buildings.
2 Understand the electrical supply lines, materials, safety devices and illumination
systems used in buildings.
3 Investigate and learn operations and adopt appropriate materials in plumbing systems
& integrate the same into the building projects.
4 Assess the structural health of the buildings & adopt repair strategy to the damaged
structures.
5 Implement the right methods and materials for repairing the concrete structures and
also decide the sequence of operations.
6 Create and understand proper documentation process and adopt practices for safety for
protection of men and materials on the repair site.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module oth er than module 3).
4 Only four questions need to be solved in total.
Recommended Books:
1 Heat Pumps and Electric Heating: E. R. Ambrose , John and Wiley and Sons, Inc., New
York, 1968
2 Handbook for Building Engineers in Metric Systems, NBC, New Delhi, 1968.
3 Philips Lighting in Architectural Design, McGraw -Hill, New York, 1964.
4 The Lighting of Buildings: R. G. Hopkinson and J. D. Kay , Faber and Faber, London,
1969.
5 National Building Code.
6 Building Construction: Dr. B. C. Punmia, Ashok K Jain , A.K Jain
7 Construction Engineering and Management: S. Seetharaman , Umesh Publications,
Delhi.
8 Water supply and Sanitory Installations: A. C. Panchdhari , New Age International
Publication, Delhi
Page 45
9 Concrete Repair and Maintenance: Peter H. Emmons and Gajanan M. Sabnis ,
Galgotia Publication
10 Repairs and Rehabilitation -Compilation from Indian Concrete Journal -ACC
Publication.
Building Services and Repairs: Dr . A. S. Radke, Tech Knowledge Publications
Reference Books:
1 Guide to Concrete Repair and Protection, HB84 -2006, A joint publication of Australia
Concrete Repair Association, CSIRO and Standards Australia
2 CPWD hand book on Repairs and Rehabilitation of RCC buildings published by DG
(Works), CPWD, Government of India (Nirman Bhawan),
http://www.cpwd.gov.in/handbook.pdf.
3 Guide to Concrete Repair, Glenn Smoak , US Department of the Interior Bureau of
Reclamation, Technical Service Center , http://books.google.co.in.
4 Management of Deteriorating Concrete Structures: George Somerville , Taylor and
Francis publication
5 Concrete Building Pathology: Susan Macdonald , Blackwell Publishing.
6 Testing of Concrete in Structures: John H. Bungey , Stephen G. Millard and Michael G.
Grantham , Taylor and Francis Publication.
7 Durability of concrete and Cement Composites: Page, C.L. and Page , M.M., Woodhead
Publishers
8 Fire Safety in Building: V. K. Jain, New Age International Publication, Delhi
9 MEP systems & Repairs of Buildings: A.S. Radke, Published by Synergy
Knowledgeware.
Page 46
Semester -V
Course Code Course Name Credits
CEDLO5013 Department Level Optional Course - 1
Sustainable Building Materials 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Meeting the needs of the present without compromising the ability of future generations to
meet their needs is considered to be the simplest and effective sustainable development. The
greatest threats to the sustainable development on earth are: population growth and
urbanization, energy use and global warming, excessive waste generation and the subsequent
pollution and limited supply of resources. Concrete is the prima ry construction material in the
world. Construction industry consumes 40 percent of the total energy and about one half of
world’s major resources. Hence, it is imperative to regulate the use of materials and energy in
this industry. The largest environmen tal impact of the concrete industry comes from the cement
manufacturing process that leads to relatively high greenhouse gas emissions. Minimizing the
quantity of cement in a concrete mix has many potential benefits. Thus, the use of industrial
byproducts such as fly ash, silica fume as cementitious materials in concrete structures can lead
to significant reduction CO2 emissions and consumption of energy and raw materials. Green
and intelligent buildings also have been evolved for sustainability of the cons truction industry.
This course provides knowledge of different sustainable building materials and technologies in
construction industry.
Objectives
1 To have more awareness among students about sustainability.
2 To understand environmental issues due to building materials and the energy
consumption in manufacturing building materials.
3 To study the alternative masonry unit and mortar for sustainable practices.
Page 47
4 To know the importance of cement reduction and replacements for a sustainable
development.
5 To understand the alternative building technologies which are followed in
construction.
6 To have cognizance of alternative roofing systems in practice.
Detailed Syllabus
Module Course Module / Contents Periods
1 Sustainability
07 1.1 Introduction: Need and concept of sustainability, Social
Environmental and economic sustainability concepts,
1.2 Sustainable development, Nexus between technology and
Development, Challenges for sustainable development
Fundamentals of sustainability.
1.3 Global Environmental issue: Resource degradation, ozone layer
Depletion Climate change, Carbon cycle, Factors affecting
Carbon credits and carbon trading, carbon foot Print, Carbon
sequestration -carbon capture and sto rage (CCS).
1.4 Environment legislation in India -water act and air act
2 Energy In Building Materials
06 2.1 Embodied energy and life cycle energy, Calculation of
embodied energy in wall, Environmental issues concerned to
building materials, Global warming and construction industry.
2.2 Environment friendly and cost -effective building technologies.
Requirements for building of different climatic regions.
2.3 Traditional building methods and vernacular architecture Green
buildings, Intelligent buildings, green materials, green building
ratings -IGBC & LEED.
2.4 Renewable and nonrenewable energy sources.
3 Elements of Structural Masonry
06 3.1 Characteristics of building blocks for walls, Stones and Laterite
blocks, Bricks, Fly ash bricks and hollow clay blocks, Concrete
Blocks, Stabilized blocks: mud blocks, steam cured blocks, Fal -
G Blocks stone masonry block.
3.2 Masonry Mortars: Mortars, Cementitious materials: Lime,
OPC, PPC, Masonry cement, Lime pozzolana (LP)cement.
Sand: natural and manufactured, Classification of mortar as per
BIS, Types of mortar, Properties and requirements of mortar,
Selection of mortar.
4 Cementitious and Supple mentary Cementitious Materials and
their Characterization: 06
4.1 Lime, Lime pozzolana cements, Pozzolana: Surkhi, Fly ash, IS
(3812) (Type C and F), GGBFS, Silica Fumes, Metakaolin,
Page 48
RHA, Composite cements and its types, IS (16415:2015),
Magnesia based cements, Calcium sulfo - cement, Alkali
activated, cement (Type 1 and Type II), Geopolymers.
Composition, Properties and uses.
4.2 Membrane curing: wax and resin based, self -curing compound:
Polymer and polyethylene glycol, Water reducing admixtures,
use of treated domestic effluent (TDE) for mixing and curing
5 Alternate Building Technologies
07 5.1 Fiber reinforced cement composites: Matrix materials,
reinforcing Materials, Applications
5.2 Fiber reinforced polymer composites: Matrix materials, types of
polymers used and applications
5.3 Ferrocement and ferroconcrete building components: Materials,
Construction methods, Mechanical properties, Applications.
5.4 Nanotechnology for sustainable construction.
6 Alternate Building Materials and Roofing Systems
07 6.1 Building materials from agro and industrial waste: Typical
agro- waste and biomass resources, Use of industrial waste: Fly
ash, Blast furnace slag, Iron ore tailings, Gold mine tailings
Granite and marble polishing fines, demolished building waste
6.2 Concepts in roofing alternati ves, Types of roof, Roof as a
structural system, Cost reduction through construction process
efficiency
6.3 Filler slab roofs, Composite beam and panel roofs, construction
Details and roof assembly.
6.4 Masonry domes and vaults: Relevance, analysis and design,
Barrel vault.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Explain sustainable practices by utilizing engineering practices.
2 Able to understand different types of environmental problems and their sustainable
solution.
3 Suggest appropriate type of masonry unit and mortar for civil engineering
constructions.
4 Analyze different alternative building materials for construction.
5 To suggest suitable alternative building technologies for sustainable development.
6 To propose different roofing systems and use of waste materials in construction
industry.
Page 49
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only f our questions need to be solved in total.
Recommended Books:
1 Alternative Building Materials and Technologies by KS Jagadish, BV Venkatraman
Reddy and KS Nanjunda Rao, New Age International publications.
2 Sustainability Engineering: Concepts, Design and Case studies by Allen D.T, and
Shonnard D.R , Prentice Hall.
3 Sustainability Engineering: Concepts, Design and Case studies by Bradley A.S;
Adebayo A.O, and Mario P., Cengage learning
4 Sustainabili ty of construction materials by Jamal M Khatib, Woodhead publishing
limited.
5 Renewable energy sources by Twidell J.W and Weir A.D, English Language Book
Society (ELBS)
Reference Books:
1 ECBC Code 2007, Bureau of Energy Efficiency, New Delhi Bureau of Energy
efficiency Publications —Rating system, TERI Publications – GRIHA Rating system.
2 Structural Masonry by Arnold W Hendry, Macmillan Publishers
3 Systems Analysis for Sustainable Engineering: Theory and Application by Ni bin
Chang, Mc Graw Hill Professional
4 NPTEL course on sustainable materials and green building
https://nptel.ac.in/ courses/105/102/105102195
5 Relevant codes
Page 50
Semester -V
Course Code Course Name Credits
CEDLO5014 Department Level Optional Course - 1
Advanced Structural Mechanics 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
The structures are subjected to various types of loading/ forces. These are axial force, shear force,
bending moment, torsion etc. This course enables the students with the knowledge in conformity
with analysis of behaviour of structural members under different types of loading. The course
facilitates in imparting theoretical concepts and physical understanding, which in turn will help
in solving structural mechanics problems, mostly involving beams & thin -walled structures
under different loadin g conditions.
Objectives
1 To understand the concept of unsymmetrical bending, shear centre and spring & evaluate
the stress due to unsymmetrical bending, shear centre for symmetrical & un - symmetrical
thin-walled sections.
2 To study the concepts and behavior of beams curved in elevation & to evaluate the stress.
3 To study the concepts and behavior of beams curved in plan subjected to different types
of loadings.
4 To understand the concept &behavior of beams resting on elastic foundation.
5 To understand the concept of different theories of failure in regards of materials.
6 To study the behavior of deep beams using different theories available for the analysis of
different sections.
Page 51
Detailed Syllabus
Module Course Module / Contents Periods
1 Unsymmetrical Bending, Shear Centre and Springs
07 1.1 Product of inertia, principal moment of inertia, flexural stresses
due to bending in two planes for symmetrical sections, bending
of unsymmetrical sections.
1.2 Shear Centre for symmetrical & unsymmetrical (about both
axes) thin -walled open sections.
1.3 Helical springs, flat spiral springs, laminated springs.
2 Beams Curved in Elevation
07 2.1 Bending of beams with large initial curvature, loaded in their
plane of curvature.
2.2 Application to analysis of hooks, circular closed rings, chain
links with straight length & semi -circular ends.
3 Beams Curved In Plan
05 3.1 Analysis of Beams Curved in Plan such as cantilever circular
arc, semicircular beams fixed at two ends and subjected to
central concentrated load.
3.2 Simply supported semicircular beam subjected to UDL
supported on three equally spaced columns, Analysis of circular
ring beam.
4 Beams on Elastic Foundation
07 4.1 Analysis of beams of infinite length subjected to concentrated
force/moment & semi -infinite length subjected to concentrated
load/moment at one end.
4.2 Semi -infinite beam hinged at one end (origin) & subjected to
UDL throughout.
5 Theories of Failure
07 5.1 Maximum principal stress theory, Maximum principal strain
theory, Maximum shear stress theory.
5.2 Maximum total strain energy theory.
6 Analysis of Deep Beams
06 6.1 Determination of deflection.
6.2 Determination of shear correction factor for various sections:
rectangular solid & hollow section, circular solid & hollow
section & I -section
Total 39
Page 52
Contribution to Outcome
On completion of this course, the students will be able to:
1 Understand the concept of unsymmetrical bending, shear centre for thin -walled open
sections and springs.
2 Analyze hooks, circular closed rings, chain links with straight length & semi -circular
ends using the concept of beam curved in elevation.
3 Analyze the beam curved in plan for different support conditions.
4 Study the behavior of beam resting on elastic foundation with various loading
conditions.
5 Underst and the concept of different theories of failure in different sections.
6 Determine deflection of deep beams, shear correction factor for different sections like
solid & hollow sections.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only four questions need to be solved in total.
Recommended Books:
1 Mechanics of Materials: Popov, E.P. Prentice Hall of India Pvt. Ltd.
2 Advanced Mechanics of Materials: Arthur P. Boresi and Omar M. Sidebottom, Wiley
and Sons.
3 Strength of Material Part I and Part II: Timoshenko, McGraw Hill, New York.
4 Mechanics of Solids: Shames, I and Pitarresi, J. M., Preentice Hall, New Delhi.
5 Strength of Materials: Subramanian, Oxford University Press.
6 Advanced Mechanics of Solids, L.S. Srinath, Tata McGraw Hill,20
7 Strength of Materials: R. K. Rajput, S. Chand and Co. Ltd.
Reference Books:
1 Mechanics of Materials: Beer, F.P., E. Russell Jhonston and John T. DeWolf, TMH,
New Delhi.
2 Beams on Elastic Foundation: Heteny M.
3 Mechanics of Materials: James Gere, M., Thomson Brooks.
4 Reinforced Concrete Deep Beams: F.K. KONG, Taylor & Francis Books, Inc.
Page 53
Semester -V
Course Code Course Name Credits
CEDLO5015 Department Level Optional Course - 1
Air and Noise Pollution and Control 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Air pollution is caused by solid and liquid particles and certain gases that are suspended in the
air. These particles and gases can come from car and truck exhaust, factories, dust, pollen, mold
spores, volcanoes and wildfires, possibly causing diseases, deat h to humans, damage to living
organisms. Noise pollution impacts millions of people on a daily basis. The most common
health problem it causes is Noise Induced Hearing Loss (NIHL). Exposure to loud noise can
also cause high blood pressure, heart disease, s leep disturbances, and stress. This subject is
intended to make students aware about the noise and air pollution, various sources which
contribute in degradation of air quality, assessing the air quality through air quality index, and
various air and noise pollution control methods and equipment used by industries.
Objectives
The students will be able to learn:
1 Understanding of basic concepts of air and noise pollution.
2 Study of air pollution episodes. Reasoning of the entire episode, identification of the
parameters, conditions, mechanisms.
3 Study of sampling types and methods for ambient air and stack.
4 Study of macro and micro meteorology for understanding the dispersion of pollutants.
5 Simple and complex modeling for point source, line source and area source.
6 Study of pollution control methods, mechanism and devices, laws.
Page 54
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction to Air Pollution: Definition, Air pollutants and its
classification and sources of generation. Emission Inventory.
Indoor air pollution. Measurement of air pollution. Air pollution in
India and other countries. Air Quality Index. Numerical on conversion
of units of pollutants. 05
2 Environmental Effects of Air Pollution: Effects of air pollutants on
human beings, plants, animals, properties and visibility. Exposure to
air pollution. Numerical problems based on COH, CoHb 06
3 Measurement and Control technology of Air Pollutants: methods to
measure ambient air pollution and stack emissions, high volume
sampler, wind rose diagram.
Control Technology: Control Devices Principles, operations and
types, simple hoods and ducts. Settling chambers, cyclones,
electrostatic precipitators (ESP), Filters, scrubbers, ab sorption towers
and incinerators. Collection efficiencies for laminar and turbulent
flows for settling chambers, particle cut size for cyclone, ESP Concept
of frictional and overall efficiencies. Design criteria for filters,
scrubbers, absorption towers an d incinerators. 10
4 Meteorological process and air quality monitoring: Large scale wind
circulation geotropic wind, gradient wind, cyclone, anticyclone,
planetary boundary layer. Lapse rate, stability conditions, wind
velocity profile, maximum mixing dep th, topographic effects. Plum
patterns, plum dispersion, Gaussian model for predicting
concentration, downwind from a single source, diffusion coefficients,
Turner’s stability categories and graphs for dispersion estimates.
Maximum ground level concentrati on, inversion effects, distance
touching ground modification of Gaussian model to predict particulate
dispersion, plume rise, modified Holland equation for small source. 10
5 Current Issues on Air Pollution and Global -Legal Aspects, air
pollution laws, I ndian standards - emission and air quality standards
Greenhouse effect/ Global warming, Ozone Pollution, Acid Rain. 04
6 Noise Pollution: definition and introduction, the effects of noise,
characteristics of sound and its measurement, levels of noise and
problems, noise rating system, noise level standards, sources of noise
and their noise levels, noise abatement and control. 04
Total 39
Page 55
Contribution to Outcome
On completion of this course, the students will be able to:
1 Identify air and noise pollution problems and interpret criteria for air and noise quality
data.
2 Recognize various environmental transformation processes of pollutants under extreme
weather condition.
3 Interpret meteorological data and develop capability to assessment of project proposal.
4 Knowledge to analyze quality of air in the form of air quality index and dispersion
modeling.
5 Relate and analyze the pollution regulation on its scientific basis.
6 Justify the use of pollution control equipment and t heir design.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only four questions need to be solved in total.
5 There can be an internal choice in various sub -questions/ questions in order to
accommodate the questions on all the topics/ sub -topics.
Recommended Books:
1 Air Pollution: Rao. M. N. and Rao, H. V. N., Tata McGraw Hill Publication, New
Delhi.
2 Environmental Pollution Control Engineering: Rao C.S., New Age International
Publishers.
3 Noise Pollution: Agarwal S.K., APH Publishing Corporation.
4 Noise Pollution and Control Strategy: Singal S.P., Alpha Science International LTD.
5 Sewage disposal and Air pollution engineering: Garg, S.K., Khanna pbl.
Page 56
Reference Books:
1 Air Pollution: Part A - Analysis and Part B-Prevention and Control: Ledbetter, J. O.,
Make Dekker Inc., New York.
2 Air Pollution: Wark and Warner, Harper and Row, New York.
3 Air Pollution Vol.1: Tripathi, A. K., Ashish Publication House, New Delhi.
4 Air Pollution Handbook: Magill, P. L.et al ., McGraw Hill publication.
5 Air and Noise Pollution Control: Volume 1: Wang,L.K. and Pereira, N.C., Humana
6 Textbook of Noise Pollution and its Control: Bhatia S. C., Atlantic Publishers and
Distributors, New Delhi.
7 Industrial Air Pollution Handbook: Parker, A., Tata McGraw Hills Publication.
8 Air Pollution: Henry Capeskins, McGraw Hill publication.
9 Environmental Noise Pollution: Noise Mapping, Public Health, and Policy,Enda
Murphy and Eoin King.
10 Air Pollution: Wark and War ner, Harper and Row, New York.
11 Government of India’s Publication of laws related to air pollution, Maharashtra
Pollution Control Board’s (MPCB) Publication of standards. IndianStandards relevant
to Air Pollution Monitoring, Definitions, Standards.
12 Air Pollution Control Theory: Martin Crawford, McGraw Hill publication.
Page 57
Semester -V
Course Code Course Name Credits
CEDLO5016 Department Level Optional Course - 1
Transportation Planning and Economics 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
The ultimate aim of Transport planning is to generate alternatives for improving Transportation
system to meet future demand and selecting the best alternative after proper evaluation. The
Course concentrates on Transportation system planning, Public Transportation Planning,
Parking planning, and economic analysis of Transportation projects. Basic purpose of
transportation planning is focusing on what's the most efficient movement for people and go ods
around the world. Improving access to an area not only reduces congestion, but the accessibility
attracts new residents and businesses ultimately helping economic development.
Objectives
1 To understand various urban development policies in India and to learn different planning
surveys.
2 To analyze and plan future traffic flow using four stage modelling.
3 To understand the implementation of land use transport model in Urban area.
4 To carry out economic analyses for different transportation infrastructure projects.
5 To understand and plan Urban public Transportation system.
6 To plan and design Parking system for residential, commercial and other projects.
Page 58
Detailed Syllabus
Module Course Module / Contents Periods
1 Urban Transportation Planning
04 1.1 Problems & factors in Transportation Planning, Development
of Transportation Systems in India, Growth of Transport -
Trends in Traffic - Imbalances in Transport System.
1.2 Urban growth mechanism – Urban morphology - Urbanization
& travel demand - Urban development planning policy – NUTP
- Urban transport projects - Urban transport problems in India
1.3 Urban travel patterns - Study area delineation - Zoning -
Planning surveys - Urban activity syst em, Trip based and
activity -based approach - Four stage travel demand modelling.
2 Four Stage Modelling
10 2.1 Trip generation analysis: trip classification, multiple regression
analysis, category analysis
2.2 Trip distribution analysis: introduction, methods of trip
distribution, uniform and average factor method, Fratar method,
Furness method, the gravity model, opportunities model.
2.3 Modal split analysis: introduction, Modal split analysis modal
split mo dels.
2.4 Traffic Assignment: purpose of traffic assignment,
Assignment techniques: All or nothing assignment, Multiple
route assignment, Capacity restraint assignment, Diversion
Curves.
3 Land Use Transport Modelling
05 3.1 Urban system components - Urban spatial structure –
Accessibility - Location theory.
3.2 Land use models - Land use transport models, Lowry & Garin
– Lowry models.
4 Transportation Economics
10 4.1 Economic evaluation of highway schemes, need for economic
evaluation, cost and benefits of transportation projects
4.2 Basic principles of economic evaluation, Net present value
method, benefit/cost ratio method, internal rate of return
method. Vehicle operating costs.
5 Urban Public Transport Planning
05 5.1 Growth history – Urban growth & public transport needs -
Modes of public transport and comparison - Public transport
travel characteristics
5.2 Technology of bus, rail, rapid transit systems, and basic
operating elements. Transit characteristics - Fleet size and
capacity estimation.
6 Parking Planning and Design 05
Page 59
6.1 Types of Parking’s, Methods of surveys, Parking inventories,
Parking Design
6.2 Planning of parking for residential and commercial buildings
including shopping complex, malls and multiplex.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Understand various Urban transport related terms and policies along with methods to
carry out planning surveys.
2 Carry out trip generation, trip distribution, modal split and traffic assignment for
planning of urban transport system.
3 Apply land use transport models at Urban area.
4 Carry out economic analysis of different Transport related Infrastructure projects by
analyzing costs and benefits related to projects using NPV, IRR and B/C ratio method.
5 Estimate capacity of different public transportation modes in Urban area and to plan
and schedule the same based on fleet size.
6 Plan and design Parking facility at Urban area.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only four questions need to be solved in total.
Page 60
Recommended Books:
1 Kadiyali, L.R., Traffic Engineering and Transport Planning, Khanna Publishers, New
Delhi, 2002.
2 IRC: SP: 30 -1993., Manual on Economic Evaluation of Highway Projects in India.
3 Sarkar P K., Maitri V.,Economics in Highway and Transportation Planning, Standard
Publisher, New Delhi, 2010.
4 K.S. Ramegau da, Urban and Regional Planning, Mysore University Publication.
5 Ceder, A.,Public Transit Planning and Operation: Theory, Modeling and Practice, B -H
Elsevier Ltd., MA, 2007.
6 IRC:SP:12 -2015, Guidelines for Parking Facilities in Urban Roads
Reference Books:
1 Khisty C J., Lall B.Kent, Transportation Engineering – An Introduction, Prentice -Hall,
NJ, 2005
2 Ortuzar, J. D., Willumsen, L.G., Modeling Transport, John Wiley & Sons, 1994
3 Papacostas C.S. and Prevedouros, P.D., Transportation Engineering & Planning, PHI,
New Delhi,2002
4 Hutchinson B.G., Principles of Urb an Transportation System Planning, Mc -Graw Hill,
1974.
Page 61
Semester -V
Course Code Course Name Credits
CEDLO5017 Department Level Optional Course – 1
Advanced Concrete Technology 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Basic concept of concrete technology is essential for civil engineering students to execute the
civil engineering projects as per the standard laid down time to time. Advancements in concrete
technology is the backbone of infrastructure of civi l engineering field. This course provides
necessary knowledge about various concreting operations and testing operations during and
after construction. This course is intended for gaining knowledge about the properties of
materials, especially concrete and to maintain quality in construction projects. This course will
also provide knowledge to the students about the criteria to be remembered during the selection
of materials, its mix proportioning, mixing, placing, compacting, curing and finishing.
Objectives
1 To understand the various properties and tests of materials used in concrete along with
the rheology of fresh concrete.
2 To study the different procedures for testing hardened concrete, its compositions and
quality of in place concrete.
3 To understand the concept of durability and cracking in concrete. To also understand
the significance and parameters of concreting under extreme environment and
conditions.
4 To understand the concept and optimization of the mix design of concrete by various
codes.
5 To study the various constituents, properties, significance and applications of special
concrete.
6 To study the quality of concrete and check the acceptance criteria.
Page 62
Detailed Syllabus
Module Course Module / Contents Periods
1 Constituents and Properties Of Concrete
08 1.1 Introduction of cement and water: Chemical composition of
OPC, hydration, chemistry of cement, cement testing, water
requirement for hydration, water quality for concrete and water
quality test.
1.2 Aggregates: Types of aggregate (natural, synthetic, recycled),
required characteristics of aggregates for concrete, introduction
to gradation of aggregates, standard grading curve and gap
grading.
1.3 Chemical admixture: Introduction to accelerators, retarders,
plasticizers, super plasticizers, viscosity modifying admixtures,
water proofers, miscellaneous admixtures.
1.4 Mineral admixture: Introduction, composition of mineral
admixture, fly ash and its type, silica fume , ground granulated
blast furnace slag and others. Effects of mineral admixture on
fresh and hardened concrete properties.
1.5 Properties of fresh concrete: Introduction to properties of fresh
concrete, w/c ratio, w/b ratio, gel space ratio, maturity co ncept,
aggregate cement bond strength, pumping of concrete.
1.6 Rheological models of fresh concrete: Introduction, simple
flow test, rheological models and test methods, factors
affecting rheological properties of concrete and effect of
rheological pro perties on different types of concrete.
2 Testing of Concrete
05 2.1 Introduction to testing of hardened concrete - compression,
tension, and flexure. Methods of testing (destructive, semi
destructive, non -destructive).
2.2 Properties of hardened concrete: Factors influencing strength,
importance of end effects in compression testing, tensile
strength of concrete (split and flexural), relationship between
compressive and tensile strength.
2.3 Advanced non -destructive evaluation: Ground penetration
radar, probe test penetration, pull out/off, break off method,
stress wave propagation method, electrical / magnetic methods,
infrared thermography, and core test.
3 Durability of Concrete
10 3.1 Introduction to durability and permeability: Transport
mechanism of fluids and gases in concrete, role of w/c and
admixture on durability. Design of durability using
performance specification.
3.2 Corrosion and carbonation: Introduction to corrosion of
reinforcement in concrete, factors influencing corrosion,
damages preventive measures of corrosion, tests for existing
structures and remedial measures of corrosion, introduction and
measurement of depth of carbonation.
3.3 Concrete structures in special environment: Fr ost action, fire or
Page 63
high temperature, chemical attack and aggressive environment
(sulphate attack, chloride attack, acid attack in sewers, sea water
attack), alkali aggregate reaction (alkali silica and carbonate
reaction).
3.4 Concreting under extreme weather: Hot and cold weather
concreting, underwater concreting.
4 Concrete Mixture Design
07 4.1 Design of concrete mixes by IS 10262 (latest edition) Method –
with and without fly ash, super plasticizer, effect of pumping of
concrete on mixture design.
4.2 Design of concrete mixes by American Concrete Institute (ACI)
Method – Air and non -air entrained concrete.
4.3 Design of concrete mixes by Department of Environment (DoE)
Method.
4.4 Design of concrete mixes by Road note 4 Method.
4.5 Design of high strength concrete mixes using ACI 211.4R - 93
Method.
5 Special Concretes
06 5.1 Light weight concrete and ultra -light weight concrete: Types
and properties of light weight aggregates, factors influencing
the strength and density of light weight aggregate concrete,
properties of light weight aggregate concrete.
Introduction to other l ight weight concrete – Cellular and
foamed concrete. (01).
5.2 High performance concrete: Methods for achieving high
performance concrete, requirements for high performance
characteristics, material selection, advantages and applications.
5.3 Self-compacting concrete (SCC): Materials for SCC,
comparison of traditional and SCC constituents, requirements
for SCC, initial mix compositions, production and placing of
SCC, fresh concrete tests for SCC.
5.4 Fiber Reinforced Concrete (FRC): Study of different fibers
(metallic fiber, polymeric fibers, carbon fibers, glass fibers,
naturally occurring fibers) in concrete with respect to volume
fraction, orientation and aspect ratio, physical and mechanical
properties - steel and polypropylene fiber reinf orced concrete.
Applications of steel and polypropylene fibers reinforced
concrete.
5.5 Introduction to other special concrete – Vacuum concrete, waste
material -based concrete, shotcrete, roller compacted, mass
concrete.
6 Quality Control (QC)
03 6.1 Introduction: Statistical QC, quality factors, control charts.
6.2 Acceptance criteria according to Indian standards: Strength of
concrete (site and laboratory)
Total 39
Page 64
Contribution to Outcome
On completion of this course, the students will be able to:
1 To use the various concrete materials and demonstrate the fresh properties of concrete.
2 To perform different testing methods of concrete.
3 To describe the durability of concrete and apply the knowledge of durability in extreme
weather concreting.
4 To design the concrete mix for field application by different methods.
5 To explain the various properties of special concrete.
6 To discuss the quality of concrete and explain the acceptance criteria.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be consid ered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module oth er than module 3).
4 Only four questions need to be solved in total.
Recommended Books:
1 Concrete Technology: A. R. Shanthakumar, Oxford University Press, New Delhi,
2007.
2 Concrete Technology Theory and Practice: Shetty M.S., S. Chand.
3 Properties of concrete: Neville, Isaac Pitman, London.
4 Concrete Technology: Gambhir M.L., Tata McGraw Hill, New Delhi.
5 Concrete Technology: Neville A.M. & Brooks. J. J., ELBS -Longman, Pearson
Education Ltd.
6 Relevant I.S. codes: Bureau of Indian st andard and ACI code.
7 Design of concrete mixes by N Krishna Raju (Latest Edition), CBS Publishers and
Distributers Pvt. Ltd.
Page 65
Reference Books:
1 Fibre Reinforced Cementitious Composites: Arnon Bentur and Sidney Mindess,
Modern Concrete Technology Series, Tylor and Francis.
2 Concrete - Microstructures, Properties and Materials: P. Kumar Mehta and Paulo J. M.
Monteiro, Indian Edition, Indian Concrete Institute, Chennai, 1999
3 Special Publication of ACI on Polymer concrete and FRC.
4 Concrete Technology: D.F. Orchardi, Wiley, 1962.
5 www.theconcreteportal.com
Page 66
Semester -V
Course Code Course Name Credits
CEL501 Theory of Reinforced Concrete Structures (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective s:
1 To develop a clear understanding of design philosophy amongst the students for the
design of reinforced concrete structures using working stress method (WSM) and limit
state method (LSM).
2 To study various clauses of IS: 456 -2000 and their significance in the RCC design.
3 To apply various concepts of LSM in the analysis and design of beams, slabs and
columns.
4 To study the concept of Serviceability and Durability for deflection and crack width
calculation in RCC structures.
5 To develop the concept of design using design charts and curves for columns
subjected to axial load and moment.
6 To study the concept of reinforced concrete footing design subjected to axial load and
moment.
Course Outcomes:
At the end of the course, learner will be able to:
1 Understand the fundamentals of WSM and LSM.
2 Apply various clauses specified in IS: 456 -2000 for designing structural members with
safety and economy.
3 Understand the use of readymade design charts and curves from Special Publications
of Bureau of Indian Standards.
4 Analyze and design various reinforced concrete elements such as beam, slab, column,
footings using the concept of Limit State Method.
Page 67
List of Tutorials and A ssignments
Week
(Activity) Detailed Content Hours
1st Week
(Tutorial) Analysis and Design of Singly and Doubly Reinforced RCC beam
using WSM
(Numericals Based on this module will be solved in tutorial class) 02
2nd Week
(Assignment) Analysis and Design of Singly and Doubly reinforced RCC beam
using WSM or any one activity from below:
Solve set of Questions given by the course instructor.
Write a report o n provisions in IS 456 2000 related to the design
of beams
A comparative study consisting of advantages and disadvantages
of WSM and LSM 02
3rd Week
(Tutorial) Analysis and Design of Singly and Doubly Reinforced RCC beam
using LSM.
(Numericals Based on this module will be solved in tutorial class) 02
4th Week
(Assignment) Analysis and Design of Singly and Doubly Reinforced RCC beam
using LSM. Or any one activit y from below:
Solve set of Questions given by the course instructor.
Study of IS 456 2000 provisions on Limit state of collapse:
Flexure. 02
5th Week
(Tutorial) Analysis and Design of Flanged beams for Flexure using LSM.
Design of RCC beams in shear, bon d, and torsion.
(Numericals Based on this module will be solved in tutorial class) 02
6th Week
(Assignment) Analysis and Design of Flanged beams for Flexure using LSM. Or
any one activity from below:
Design of RCC beams in shear, bond, and torsion.
Solve set of Questions given by the course instructor.
Study of IS 456 2000 provisions on Limit state of collapse - Shear,
Bond and Torsion. 02
7th Week
(Tutorial) Design of Simply supported One -way and Two -way slabs as per
IS: 456 -2000
(Numericals Based on this module will be solved in tutorial class) 02
8th Week
(Assignment) Design of Simply supported One -way and Two -way slabs as per
IS: 456 -2000. Or any one activity from below:
Solve set of Questions given by the course instructor.
Study of IS: 456 -2000 provisions on Design of RCC slabs. 02
9th Week
(Tutorial) Analysis and Design of Columns loaded Axially, Uni -axially, and
Bi-axially, using LSM.
(Numericals Based on this module will be solved in tutorial class) 02
10th Week
(Assignment) Analysis and Design of Columns loaded Axially, Uni -axially, and
Bi-axially, using LSM. or any one activity from below:
Solve set of Questions given by the course instructor.
Studying the development of interactive curves and their use in
column design. 02
Page 68
Study of IS: 456 -2000 Provisions for Limit State of Collapse –
Compression
11th Week
(Tutorial) Design of Isolated square and rectangular footings subjected to
axial load and moment.
(Numericals Based on this module will be solved in tutorial class) 02
12th Week
(Assignment) Design of Isolated Square and rectangular footings subjected to
axial load and moment. or any one activity from below:
Solve set of Questions given by the course instructor.
Study of IS: 456 -2000 provisions related to design of RCC
foundations.
Report or presentation on Significance and Design of different
types of RCC Foundations by various groups of students. 02
13th Week Viva – Voce Examination 02
Assessment:
• Term Work
Including Laboratory Work and Assignments both, Distribution of marks for Term Work shall
be as follows:
Laboratory Work : 10 Marks
Assignments : 10 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
• End Semester Oral Examination
Oral examination will be based on entire syllabus.
• Recommended books:
Design of Reinforced Concrete Structures: Dayaratnam, P; Oxford and IBH.
Limit State Design of Reinforced Concrete: Jain A. K, Nemchand and Bros., Roorkee
Limit State Design of Reinforced Concrete: Shah and Karve, Structure Publications, Pune.
Ultimate Strength Design for Structural Concrete: Arthur, P. D. and Ramakrishnan, V., Wheeler
and Co. Pvt . Ltd.
Reinforced Concrete: H.J. Shah, Charotar Publishers, Anand.
Fundamentals of Reinforced Concrete: Sinha & Roy, S. Chand and Co. Ltd.
Illustrated Reinforced Concrete Design: Dr. V. L. Shah and Dr. S. R. Karve, Structure
Publications, Pune.
Reinfor ced Concrete Design: Wang, C. K., Salmon, C. G., and Pincheira, J. A, John Wiley
(2007), 7th Edition.
Reinforced Concrete Fundamentals: Ferguson, P. M., Breen, J. E., and Jirsa, J. O., John Wiley
& Sons (1988) 5th Edition.
Page 69
Semester -V
Course Code Course Name Credits
CEL502 Applied Hydraulics (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective s:
1 To describe the concepts of fluid dynamics and its applications.
2 To exemplify the fundamentals of impulse momentum principle and explain the
working of various hydraulic machines.
3 To classify the uniform and non -uniform flow in open channel.
Course Outcomes:
At the end of the course, learner will be able to:
1 Evaluate the efficiencies and discuss the working of various pumps and turbines.
2 Apply impulse momentum principle to hydraulic machines.
3 Determine the rate of flow through open channel.
4 Generate and evaluate Gradually varied flow (GVF) and Rapid varied Flow (RVF) in
open channel flow.
5 Compute the Chezy’s Constant through tilting flume.
Page 70
List of Experiments (Minimum Six)
Module Detailed Content Lab Session /
Hr.
1 Impact of jet, flat plate, inclined plate, curved vanes. 02
2 Performance of Pelton turbine. 02
3 Performance of Francis Turbine. 02
4 Performance of Kaplan Turbine. 02
5 Performance of Centrifugal pumps. 02
6 Chezy’s roughness factor. 02
7 Specific energy. 02
8 Hydraulic Jump. 02
9 Calibration of Broad crested weir/Venturi flume. 02
Assessment:
• Term Work
The term work shall comprise of the neatly written report based on the afore -mentioned
experiments and assignments. The assignments shall comprise of the minimum 20 problems
covering the entire syllabus divided properly module wise. The marks of the term work shall be
judiciously awarded for the various components of the term work and depending upon the quality
of the term work. The final certification and acceptance of term work warrants the sat isfactory
performance of laboratory work by the student, appropriate completion of the assignments.
Distribution of marks for Term Work shall be as follows:
Laboratory Work : 10 Marks
Assignments : 10 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
• End Semester Oral Examination
Pair of Internal and External Examiner should conduct oral examination.
Reference Books:
1 Fluid Mechanics and Hydraulic Machines: R. K. Rajput, S. Chand and Company.
2 Hydraulics and Fluid mechanics: Dr. P.M. Modi and Dr. S.M. Seth, Standard Book House,
Delhi.
3 Hydraulics Fluid Mechanics and Fluid Machines: S. Ramamrutham, Dhanpat Rai
Publishing Company (P) Ltd -New Delhi.
4 Theory and Application of Fluid Mechanics: K. Subramanian, Tata McGraw hill publishing
company, New Delhi.
5 Fluid Mechanics and Hydraulics : Dr. S.K. Ukarande, Ane’s Books Pvt. Ltd. (Revised
Edition 2012), ISBN 97893 8116 2538.
6 Fluid Mechanics and fluid pressure engineering: Dr. D.S. Kumar, F.K. Kataria and sons.
7 Fluid Mechanics: R.K. Bansal Laxmi Publications (P) Ltd.
Page 71
Semester -V
Course Code Course Name Credits
CEL50 3 Geotechnical Engineering – I (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective s:
1 Determination of moisture content, specific gravity of soil solids and in -situ field
density of soils as well as field identification of fine -grained soils
2 To determine the grain size distribution of soils and consistency or Atterberg limits of
fine-grained soils
3 To determine coefficient of permeability of soils in laboratory
4 To determine compaction characteristics of soils in laboratory
5 To determine the density index (relative density) of cohesionless soil
6 To determine field SPT ‘N’ value by Standard Penetration Test
Course Outcomes:
At the end of the course, learner will be able to:
1 Determine the physical and engineering properties of soil
2 Determine the plasticity characteristics of soil
3 Carry out sieve analysis of soil, plot grain size distribution curve and determine the IS
classification of soil
4 Determine coefficient of permeability of soils
5 Determine the compaction characteristics of soils
6 Compute the field SPT ‘N’ value and prepare the bore log
Page 72
List of Experiments (Minimum ten)
Module Detailed Content Lab Session /
Hr.
1 Determination of natural moisture content of soil using oven drying
method
Following other methods to find moisture content shall be explained
briefly:
a) Pycnometer method
b) Sand bath method
c) Alcohol method
d) Torsional balance method
e) Moisture meter
f) Radio activity method 02
2 Specific gravity of soil grains by density bottle method or
Pycnometer method 02
3 Field density using core cutter method 02
4 Field density using sand replacement method 02
5 Field identification of fine -grained soils 02
6 Grain size distribution of coarse -grained portions (gravel and
sand) of soil by sieve analysis 02
7 Grain size distribution of fine portions (silt and clay) of the soil by
Hydrometer analysis 02
8 Determination of liquid (Casagrande method), plastic and shrinkage
limits 02
9 Determination of liquid limit by cone penetrometer method 02
10 Determination of co-efficient of permeability using constant head
method 02
11 Determination of co -efficient of permeability using falling head
method 02
12 Compaction test, IS light compaction test/ Standard Proctor test 02
13 Compaction test, IS heavy compaction test/ Modified Proctor test 02
14 Relative density (or, density index) test 02
15 Standard penetration test 02
Assessment:
• Term Work
a) The term work shall be comprised of the neatly written reports based on the experiments
performed in the laboratory, assignments, attendance and case study.
b) The assignments shall be given covering the entire syllabus in such a way that the students
would attempt at least two problems on each module/ sub -module.
c) Students (5 students max. in a group) should perform a case study on Forensic Investigation
for Geotechnical Failures/or, Geo environmental Engineering and must submit a report or power
Page 73
point presentation on the same. The questions related to this conce pt shall not be asked in the
theory examination. However, it shall be treated as a part of term work submission.
Distribution of Term -work Marks
The marks of the term work shall be judiciously awarded depending upon the quality of the
laboratory works, as signments, attendance and case study. The final certification acceptance of
term work warrants the satisfactory and appropriate completion of laboratory work, assignments
and case study with the minimum passing marks by the students. The following weightag e of
marks shall be given for different components of the term -work. :
Laboratory Work : 12 Marks
Case study : 03 Marks
Assignments : 05 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
• End Semester Oral Examination
The oral examination shall be based upon the entire theory and laboratory syllabus.
Reference Books:
1 SCI/SCOPUS Indexed Refereed International Journals (For Case Studies)
2 Relevant Indian Standard Specifications Codes, BIS Publications, New Delhi.
3 Departmental Laboratory Manual
4 Standard Geotechnical Engineering Handbook
5 NPTEL Video lectures on Practical.
Page 74
Semester -V
Course Code Course Name Credits
CEL50 4 Transportation Engineering (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective:
1 To determine Penetration grade and Viscosity grade of bitumen.
2 To find the Softening point and Ductility value of bitumen.
3 To determine Impact, Abrasion and Crushing value of aggregate.
4 To carry out shape test on aggregates.
5 To carry out Classified volume study and plot speed profile at mid-block section.
Course Outcomes:
At the end of the course, learner will be able to:
1 Classify Bitumen on basis of Penetration and Viscosity grade.
2 Select Bitumen as per suitability on basis of Softening point and Ductility value.
3 Determine suitability of aggregate on basis of Impact value, Abrasion value and
Crushing value.
4 Differentiate Elongated and Flaky aggregates on basis of Shape test.
5 Carry out Classified volume study at mid -block section of road.
6 Plot speed profile curve (S -Curve) at mid -block section.
Page 75
List of Experiments (Minimum Eight )
Module Detailed Content Lab Session /
Hr.
1 Penetration Test on Bitumen. 02
2 Viscosity Test on Bitumen. 02
3 Softening Point Test on Bitumen 02
4 Ductility Test on Bitumen 02
5 Determination of Aggregate Impact Value 02
6 Determination of Aggregate Crushing Value 02
7 Determination of Abrasion Value of Road Aggregate 02
8 Shape Test of Aggregate 02
9 Classified Volume count at mid -block section 02
10 Speed profile study at mid -block section 02
Assessment:
• Term Work
Including Laboratory Work Survey project report and Assignments, Distribution of marks for
Term Work shall be as follows:
Laboratory Work and Traffic Survey : 10 Marks
Assignments : 10 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
• End Semester Oral Examination
Oral exam will be based on experiments performed, traffic survey carried out and theory syllabus.
Reference Books:
1 Highway Engineering: Khanna, S.K. and Justo, C. E. G.;Nem Chand and Bros., Roorkee.
2 Principles, Practice and Design of Highway Engineering (Including Airport Engineering)”
Sharma, S.K.; S. Chand and Company Pvt. Ltd., New Delhi.
3 Highway Material and Pavement Testing: Dr. S. K. Khanna, Dr. C. E. G. Justo and Dr. A.
Veeraragavan. Nem Chand and Bros., Roorkee, India.
4 Traffic En gineering and Transport Planning: Kadiyali, L.R., Khanna Publishers, Delhi
5 Principles and Practice of Highway Engineering: Kadiyali, L. R.; Khanna Publsihers,
Delhi.
6 Relevant specifications of MORTH and relevant IRC codes.
Page 76
Semester -V
Course Code Course Name Credits
CEL505 Professional Communication and Ethics -II 02
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
--- 02*+02 - - 02 - 02
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
- - - - - 25 - 25 50
Course Rationale
This curriculum is designed to build up a professional and ethical approach, effective oral and
written communication with enhanced soft skills. Through practical sessions, it augments
student's interactive competence and confidence to respond appropriately and creatively to the
implied challenges of the global Industrial and Corporate requirements. It further inculcates
the social responsibility of engineers as technical citizens .
Course Objectives
1 Discern and develop an effective style of writing important technical/business documents.
2 Investigate possible resources and plan a successful job campaign.
3 Understand the dynamics of professional communication in the form of group discussions,
meetings, etc. required for career enhancement.
4 Develop creative and impactful presentation skills.
5 Analyze personal traits, interests, values, aptitudes and skills.
6 Understand the importance of integrity and develop a personal code of ethics.
Course Outcomes
Learner will be able to
1 Plan and prepare effective business/ technical documents which will in turn provide solid
foundation for their future managerial roles.
2 Strategize their personal and professional skills to build a professional image and meet
the demands of the industry.
3 Emerge successful in group discussions, meetings and result -oriented agreeable solutions
in group communication situations.
Page 77
4 Deliver persuasive and professional presentations.
5 Develop creative thinking and interpersonal skills required for effective professional
communication.
6 Apply codes of ethical conduct, personal integrity and norms of organizational
behaviour.
Detailed Syllabus
Module Course Module / Contents Periods
1 Advanced Technical Writing: Project/ Problem Based Learning
(PBL)
06 1.1 Purpose and Classification of Reports, Classification on the
basis of:
Subject Matter (Technology, Accounting, Finance, Marketing,
etc.); Time Interval (Periodic, One -time, Special); Function
(Informational, Analytical, etc.); Physical Factors
(Memorandum, Letter, Short & Long)
1.2 Parts of a Long Formal Report Prefatory Parts (Front Matter),
Report Proper (Main Body), Appended Parts (Back Matter)
1.3 Language and Style of Reports : Tense, Person & Voice of
Reports, Numbering Style of Chapters, Sections, Figures,
Tables and Equations, Referencing Styles in APA & MLA
Format, Proofreading through Plagiarism Checkers
1.4 Definition, Purpose & Types of Proposals: Solicited (in
conformance with RFP) & Unsolicited Proposals, Types (Short
and Long proposals)
1.5 Parts of a Proposal Elements: Scope and Limitations,
Conclusion
1.6 Technical Paper Writing : Parts of a Technical Paper
(Abstract, Introduction, Resear ch Methods, Findings and
Analysis, Discussion, Limitations, Future Scope and
References), Language and Formatting, Referencing in IEEE
Format
2 Employment Skills
06 2.1 Cover Letter & Resume: Parts and Content of a Cover Letter,
Difference between Bio -data, Resume & CV, Essential Parts of
a Resume, Types of Resume (Chronological, Functional &
Combination)
2.2 Statement of Purpose: Importance of SOP, Tips for Writing an
Effective SOP
2.3 Verbal Aptitude Test: Modelled on CAT, GRE, GMAT exams
2.4 Group Discussions: Purpose of a GD, Parameters of
Evaluating a GD, Types of GDs (Normal, Case -based & Role
Plays), GD Etiquettes
2.5 Personal Interviews: Planning and Preparation, Types of
Questions, Types of Interviews (Structured, Stress, Behavioral,
Problem Solving & Case -based), Modes of Interviews: Face -to-
face (One -to one and Panel) Telephonic, Virtual
Page 78
3 Business Meetings
02 3.1 Conducting Business Meetings: Types of Meetings, Roles and
Responsibilities of Chairperson, Secretary and Members,
Meeting Etiquette
3.2 Documentation : Notice, Agenda, Minutes
4 Technical/ Business Presentations
02 4.1 Effective Presentation Strategies : Defining Purpose,
Analysing Audience, Location and Event, Gathering, Selecting
& Arranging Material, structuring a Presentation, Making
Effective Slides, Types of Presentations Aids, Closing a
Presentation, Platform Skills
4.2 Group Presentations : Sharing Responsibility in a Team,
Building the contents and visuals together, Transition Phases
5 Interpersonal Skills
08 5.1 Interpersonal Skills : Emotional Intelligence, Leadership &
Motivation, Conflict Management & Negotiation, Time
Management, Assertiveness, Decision Making
5.2 Start -up Skills: Financial Literacy, Risk Assessment, Data
Analysis (e.g., Consumer Behaviour, Market Trends, etc.)
6 Corporate Ethics
02 6.1 Intellectual Property Rights: Copyrights, Trademarks,
Patents, Industrial Designs, Geographical Indications,
Integrated Circuits, Trade Secrets (Undisclosed Information)
6.2 Case Studies: Cases related to Business/ Corporate Ethics
Total 26
List of Assignments for Term Work
In the form of Short Notes, Questionnaire/ MCQ Test, Role Play, Case Study, Quiz, etc.
1 Cover Letter and Resume
2 Short Proposal
3 Meeting Documentation
4 Writing a Technical Paper/ Analysing a Published Technical Paper
5 Writing a SOP
6 IPR
7 Interpersonal Skills
8 Aptitude test (Verbal Ability)
Note:
• The Main Body of the project/book report should contain minimum 25 pages
(excluding Front and Back matter).
• The group size for the final report presentation should not be less than 5 students and
not to exceed more than 7 students.
• There will be an end –semester presentation based on the book report.
Page 79
Assessment:
• Term Work
Term work shall consist of minimum 8 experiments.
Assignments : 10 Marks
Presentation Slides : 05 Marks
Book Report (Hard Copy) : 05 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
The final certification and acceptance of term work ensures the satisfactory performance of
labora tory work and minimum passing in the term work.
• Internal Oral
Oral Examination will be based on a GD & the Project/Book Report presentation
Group Discussion : 10 Marks
Individual Presentation : 10 Marks
Group Dynamics : 05 Marks
Recommended Books:
1 Arms, V. M. (2005). Humanities for the engineering curriculum: With selected
chapters from Olsen/ Huckin: Technical writing and professional communication,
second edition. Boston, MA: McGraw -Hill.
2 Bovée, C. L., &Thill, J. V. (2021 ). Business communication today. Upper Saddle
River, NJ: Pearson.
3 Butterfield, J. (2017). Verbal communication: Soft skills for a digital workplace.
Boston, MA: Cengage Learning.
4 Masters, L. A., Wallace, H. R., & Harwood, L. (2011). Personal development for life
and work. Mason: South -Western Cengage Learning.
5 Robbins, S. P., Judge, T. A., & Campbell, T. T. (2017). Organizational behaviour.
Harlow, England: Pearson.
6 Meenakshi Raman, Sangeeta Sharma (2004) Technical Communication, Principles and
Practice. Oxford University Press
7 Archana Ram (2018) Place Mentor, Tests of Aptitude for Placement Readiness.
Oxford University Press
8 Sanjay Kumar & Pushp Lata (2018). Communication Skills a workbook, New Delhi:
Oxford U niversity Press.
Page 80
Semester -V
Course Code Course Name Credits
CEM501 Mini Project -2A 2
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 04 - - 2 - 2
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration
of End
Sem
Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Rationale
From primitive habitats of early years to modern buildings, the civil engineering industry's
growth has been needing based and society centric. Civil engineers deal with many challenges
on daily basis that most people do not have any idea. Mumbai University proposed Mini projects
in the syllabus so that the budding civil eng ineers can connect with the world outside their books
and have the idea of future course. The Mini project should actually provide solution to a typical
problem after a brainstorming and in a stipulated period. The competitions ahead will give
students the experience of the civil engineering industry's real -world problems and make students
brainstorm ideas, learn, and explore the civil engineering industry.
Course Objective s:
1 To recognize societal problems and convert them into a problem statement by
understanding of facts and ideas in a group activity.
2 To deal with new problems and situations by applying acquired knowledge, facts,
techniques and rules in a different way.
3 To examine and break information into parts, by analyzing motives or causes.
4 To learn evaluating information, validity of ideas and work based on a set of
criteria.
5 To create solutions by compiling information together in a different way.
6 To design model by combining elements in a new pattern or proposing new
solutions.
Page 81
Course Outcomes:
At the end of the course, learner will be able to:
1 Identify problems based on societal /research needs and formulate a solution
strategy.
2 Apply fundamentals to develop solutions to solve societal problems in a group
3 Analyze the specific need, formulate the problem and deduce the interdisciplinary
approaches, software -based solutions and computer applications.
4 Develop systematic flow chart, evaluate inter disciplinary practices, devic es,
available software, estimate and recommend possible solutions.
5 Draw the proper inferences from available results through theoretical/ experimental/
simulations and assemble physical systems.
6 Create devises or design a computer program or develop computer application.
• Guidelines for Mini Project -2A
Expected outcome is hardware based, “A Working Model.”
Students shall form a group of 3 to 4 students, while forming a group shall not be allowed
less than three or more than four students, as it is a group activity.
Students should find ‘List of Mini project – 2A problems’ in University web portal
www.mu.ac.in, and in consultation with faculty supervisor/ head of department/ internal
committee of faculties select the title.
Stude nts shall submit implementation plan in the form of Gant/ PERT/ CPM chart, which
will cover weekly activity of mini project.
A log book to be prepared by each group, wherein group can record weekly work progress,
guide/ supervisor can verify and record notes/ comments.
Faculty supervisor may give inputs to students during mini project activity; however, focus
shall be on self -learning.
Students in a group shall understand problem effectively, propose multiple solution and
select best possible solution in consultation with guide/ supervisor.
Students shall convert the best solution into working model using various components of
their domain areas and demonstrate.
The solution to be validated with proper justification and report to be compiled in standard
format of University of Mumbai.
With the focus on the self -learning, innovation, addressing societal problems and
entrepreneurship quality development within the students through the Mini Projects, it is
preferable that Students come out with original solution.
However, based on the individual students or group capability, with the mentor’s
recommendations, if the proposed Mini Project adhering to the qualitative aspects mentioned
above gets completed in odd semester, then that group can be allowed to work on the
extension of the Mini Project with suitable improvements/ modifications or a completely
new project idea in even semester. This policy can be adopted on case -by-case basis.
Page 82
List of approved problems for Mini Project -2A:
H501: Construction of Model showing New application of alternative materials and byproducts
of different industries for Durability and sustainability.
H502: Construction of Model/ device for Smart Traffic Management System Using Internet of
Things
H503: IOT based smart device for traffic signal monitoring system using vehicle Count.
H504: Mini Project on Construction of Model showing New application of use of Fly Ash in
Civil Engineering works.
H505: Mini Project on specimen of Modified Concrete P avements (using unconventional,
recycled or waste product)
H506: Novel device for Base isolation system for multistoried building
H507: Mini project on specimen of light transmitting concrete.
H508: Model of Novel Seismic isolation devices for bridge structures.
H509: Novel Applications of Bamboo as a building material specimen.
H510: Development of device using sensors for deflection of girders. Beams, slabs or bridges.
H511: Development of device using sensors for detection of fracture in Railway tracks.
H512: Mini project on specimen of Bubble deck slab.
H513: Construction of specimen of GFRG panels as walls in buildings instead of conventional
walls.
H514: Construction of specimen of Agro waste reinforced panels as walls in buildings instead
of conventional walls.
H515: Construction of specimen of unconventional panels as walls in buildings instead of
conventional walls.
H516: Construction of specimen of Ferro cement Slab as a replacement to RCC slab.
H517: Construction of specimen of No Fines Concrete or porous Concrete and its applications.
H518: Construction of Model of Novel Soil Stability technique to prevent landslides.
H519: Construction of Model of a dwelling unit (house) in rural area.
H520: Typical design of Model for construction of toilets in rural India.
H521: Construction of Model for Typical applications of Ferro concrete.
H522: Construction of Model of road paths with locally sourced materials in villages.
H523: Construction of Model showing Typical application of Prestressed concrete.
H524: Construction of Model showing Typical application of fiber reinforced concrete.
(This is tentative list, this list will be continuously updated by contributions
from faculty, industry and alumni.)
Page 83
Guidelines for Assessment of Mini Project:
• Term Work
The review/ progress monitoring committee shall be constituted by head of departments of each
institute. The progress of mini project to be evaluated on continuous basis, minimum two reviews
in each semester.
In continuous assessment focus shall also be on each individual student, assessment based on
individual’s contribution in group activity, their understanding and response to questions.
Distribution of Term work marks for both seme sters shall be as below:
Marks awarded by guide/supervisor based on log book : 10 Marks
Marks awarded by review committee : 10 Marks
Quality of Project report : 5 Marks
Review/progress monitoring committee may consider following points for assessment based on
either one year or half year project as mentioned in general guidelines.
• One-year project:
Only if a project is very demanding it will be considered for ‘One Year Project’. Subject to
approval by the Head of the department.
Outcome shall be a ‘Hardware and a software based’ solution
There shall also a ‘technical paper’ to be presented in conference/published in journal (UGC
approved) or student’s competition.
In first semester entire theoretical solution shall be ready, including components/system
selection and cost analysis. Two reviews will be conducted based on presentation given by
students group.
First shall be for finalization of problem
Second shall be on finalization of proposed solution of problem.
In second semester expected work shall be procurement of component’s/systems, building
of working prototype, testing and validation of results based on work completed in an earlier
semester.
First review is based on readiness of building working prototype to be conducted.
Second review shall be based on poster presentation cum demonstration of working model
in last month of the said semester.
• Half -year project:
In this case in one semester students’ group shall complete project in all aspects including
Identification of need/problem
Proposed final solution
Procurement of components/systems
Building prototype and testing
Two reviews will be conducted for continuous assessment,
First shall be for finalization of problem and proposed solution.
Second shall be for implementation and testing of solution.
Page 84
• Assessment criteria of Mini Project:
Mini Project shall be assessed based on following criteria:
Quality of survey/ need identification
Clarity of Problem definition based on need.
Innovativeness in solutions
Feasibility of proposed problem solutions and selection of best solution
Cost effectiveness
Societal impact
Innovativeness
Cost effectiveness and Societal impact
Full functioning of working model as per stated requirements
Effective use of skill sets
Effective use of standard engineering norms
Contribution of an individual as member or leader
Clarity in written and oral communication
In one year, project, first semester evaluation may be based on first six criteria and remaining
may be used for second semester evaluation of performance of students in mini project.
In case of half year project all criteria in generic may be considered for evaluation of
performance of students in mini project.
• Guidelines for Assessment of Mini Project Practical/Oral Examination:
Report should be prepared as per the guidelines issued by the University of Mumbai.
Mini Project shall be assessed through a presentation and demonstration of working model
by the student project group to a panel of Internal and External Examiners preferably from
industry or research organizations having experience of more than five years and approved
by head of Institution.
Students shall be motivated to publish a paper based on the work in Conferences/students
competitions.
• Mini Project shall be assessed based on following points:
Quality of problem and Clarity
Innovativeness in solutions
Cost effectiveness and Societal impact
Full functioning of working model as per stated requirements
Effective use of skill sets
Effective use of standard engineering norms
Contribution of an individuals as member or leader
Clarity in written and oral commu nication
Page 85
Semester VI
Page 86
Semester -VI
Course Code Course Name Credits
CEC 601 Design and Drawing of Steel Structure s 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 4 Hours - - - 100
Rationale
Steel structures are preferred due to their higher strength, speed of construction and aesthetic
view. Civil Engineers must have knowledge of designing and detailing of steel structures to
make structures safe and serviceable during its life span. I.S. code spec ifying the use of Limit
State design philosophy for design of steel structures and its various components. This course
is designed to provide basic knowledge of design and detailing of steel structures.
Objectives
1 To make students familiar with behavior of steel structure and their components under the
action of various loads.
2 To train the students for effective use of IS codes, design tables and aids in analyzing and
designing the steel structures by limit state method.
3 To help students design connections of steel members.
4 To equip students with aspects required for designing tension member, compression
members and column bases.
5 To equip students with aspects required for designing of flexural members.
6 To aid students in designing steel trusses.
Page 87
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction
03
1.1 Types of steel structures, Properties of Structural Steel, Indian
Standard Specifications and Sections, Advantages and
limitations of WSM, permissible stresses in WSM. Introduction
to Limit State Design, partial safety factors for load and
resistance, design load combinations, section classification
such as plastic, compact, semi -compact and slender.
2 Design of Bolted A nd Welded Connections
06 2.1 Design of bolted and welded connections for axial force, beam
to beam and beam to column connections. Framed, stiffened
and unstiffened seat connections, bracket connections.
3 Design of Tension Members
04 3.1 Introduction, types of tension members, net area calculation.
3.2 Design strength due to yielding, rupture and block shear.
3.3 Design of tension members with welded and bolted end
connection using single angle section & double angle section.
4 Design of Compression Members and Column Bases
11 4.1 Introduction, types of compression members, classification of
cross sections, types of buckling, effective length of column and
slenderness ratio, buckling curves, design of compression
members as struts using single angle sections & double angle
section.
4.2 Design of axially loaded column using rolled steel sections,
design of built -up column, laced and battened Columns.
4.3 Design of slab bases & gusseted base.
5 Design of Flexural Members
11 5.1 Design strength in bending, effective length, Lateral torsion
buckling behavior of unrestrained beams, design of single rolled
section with or without flange plates, design strength of laterally
supported beams, low and high shear, design strength of
laterally unsupported beams, web buckling, web crippling,
shear lag effect and deflectio n.
5.2 Design of welded plate girder: proportioning of web and
flanges, flange plate curtailment
6 Design of Truss
04 6.1 Design of determinate truss. Calculation of dead load, live load
and wind load acting on truss. Load combinations and
calculation of internal forces. Design and detailing of members.
Support detailing. Design of angle section purlin.
Total 39
Page 88
Contribution to Outcome
On completion of this course, the students will be able to:
1 Use the knowledge of Limit State Design philosophy as applied to steel structures. IS
800 code clauses
2 Design bolted and welded connections.
3 Design members subjected to axial tension.
4 Design compression members, Built -up columns and column bases.
5 Design members subjected to bending moment, shear force etc.
6 Estimate design loads as per IS 875 for roof truss and design the Steel roof truss.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total Five questions. {(𝟑𝟐+(𝟒×𝟏𝟔)}
2 Question 1 will be compulsory carrying 32 marks and should be based on steel design
project.
3 Remaining questions will be carrying 4×16 marks, mixed in nature (for example if
Q.2 has part (a) from module 3 then part (b) will be from any other module. Only three
questions carrying 16 marks need to be solved.
4 Total Four questions need to be solved. (32+16+16+16)
5 In end semester examin ation, students will write answers in answer booklet and draw
sketches on half imperial drawing sheet.
6 Use of relevant IS codes shall be allowed in the examination
Recommended Books:
1 Design of Steel Structure by N. Subramanian, Oxford University Press, New Delhi.
2 Limit state design of steel structures by S. K. Duggal, McGraw Hill Education (India)
Pvt. Limited, New Delhi.
3 Design of steel structure by Limit State Method as per IS: 800 - 2007 by Bhavikatti S.
S., I.K. International Publishing House, New Delhi.
4 Design of Steel Structures by K. S. Sai Ram, Pearson Education, New Delhi.
5 Limit state design of steel structure s as per IS 800/2007. by S. Kanthimathinathan. I.K.
International Publishing House, New Delhi.
6 Relevant Indian Specifications, Bureau of Indian Standards, New Delhi
7 Limit state design of steel structure by Dr. V.L. Shah and Gore, Structure publicatio n
Pvt. Pune.
Page 89
Reference Books:
1 Design of Steel Structure by Allen Williams
2 Practical Design of Steel Structure by Karuna Moy Ghosh, Whittles Publishing
3 Structural design and drawing by D. Krishnamurthy, CBS Publishers, New Delhi.
4 Teaching Resources Material for steel structures by INSDAG Kolkata.
Page 90
Semester -VI
Course Code Course Name Credits
CEC602 Water Resources Engineering 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
India is an agricultural country where majority of population lives in villages so agricultural
industry is the backbone of Indian economy. Being a tropical country with large temporal and
spatial variation of rainfall and availability of rainfall only for three to four months, irrigation
is strongly needed in India. To satisfy this need, enhancing the irrigation facilities in the country
is required. This course provides necessary knowledge and information about various irrigation
methods as well as water requirements of crops, hydrologic processes, control level fixation of
dams and reservoirs and hydraulics of wells. In addition to this, it provides necessary
knowledge about analysis and design of gravity dams and earthen dams, different silt theories
related to irrigation channels, detailed classification of canal head -works and its distribution
system and finally discusses about different canal structures and cross drainage works.
Objectives
1 To study different irrigation engineering methods and water requirement of crops.
2 To study hydrological cycle, its elements and plotting of hydrographs.
3 To study and calculate discharge from aquifers.
4 To study control level fixation for reservoir, Dams i.e., gravity dam, its various components
and analysis and suitable conditions of earthen dam and its seepage analysis.
5 To study importance of silt theories and its design considerations.
6 To study Canal headwork, its distribution system and design of canal structures.
Page 91
Detailed Syllabus
Module Course Module / Contents Periods
1 Irrigation Methods and Water Requirement of Crops
07 1.1 National water policy. Introduction to irrigation and need of
irrigation, Benefits of irrigation and ill effects of irrigation,
types of Irrigation Projects: minor, medium and major
irrigation projects and National water policy.
1.2 Methods of Irrigation Systems: Surface irri gation and different
techniques of water distribution for surface irrigation,
Subsurface irrigation, sprinkler irrigation and drip irrigation.
1.3 Water Requirement of Crops: Crops and crop seasons in India,
delta and duty of crops, relationship between delta and duty of
crops. Soil water relationship and its significance from
irrigation considerations, root zone soil water, infiltration,
consumptive use, frequency of irrigation.
2 Hydrology
07 2.1 Hydrologic cycle, Precipitation: Forms and Types of
precipitations.
2.2 Measurement of rainfall by rain gauges and stream flow
measurement. calculation of missing rainfall data and adequacy
of rain gauge stations.
2.3 Runoff: Runoff - factors affecting runoff, computation of
runoff, yield of the catchment runoff hydrograph, flood
discharge and its calculations.
2.4 Hydrograph: Flood hydr ograph - Its components and base -flow
separation, Unit hydrograph, application of unit hydrograph,
methods of deriving unit hydrograph, S -hydrograph and its
application.
3 Ground Water and Well Hydraulics
05 3.1 Ground water resources and occurrence of ground water.
3.2 Well hydraulics: steady state flow conditions in wells.
3.3 Equilibrium equations for confined and unconfined aquifer.
3.4 Aquifer tests.
3.5 Difference between open well and tube well, Well Losses
4 Dams and Spillways
09 4.1 Reservoir, various zones of storage reservoir, control level
fixation for a reservoir . Introduction to reservoir sedimentation
and
control measures.
4.2 Gravity Dams: Definition, typical cross section and components
of gravity dam, forces acting on gravity dam, modes of failure
Page 92
of gravity dam, structural stability analysis of gravity dam,
elementary and practical profile of gravity dam, low and high
gravit y dam, galleries in gravity dam – Function of gallery and
different cross -sections of gallery adopted in practice, joints in
gravity dam. control of cracking in concrete dams.
4.3 Earthen Dam: Types of earthen dams and methods of
construction of earthen dam, causes and failures of earthen
dams, seepage line/phreatic line for different conditions and its
location using graphical method, seepage control through
embankment and through foundations.
4.4 Spillways: Introduction, types of spillways – its wor king and
functionality.
5 Irrigation Channels (Silt Theories)
06 5.1 Kennedy’s theory and method of channel designs silt supporting
capacity according to Kennedy’s theory.
5.2 Lacey’s regime theory and application of Lacey’s theory for
designing channel cross -section.
5.3 Comparison between Kennedy’s theory and Lacey’s theory.
5.4 Drawbacks of Kennedy’s theory and Lacey’s theory.
5.5 Introduction to sediment transport in channels.
6 Canal Headwork -Distribution System and Canal Structures
05 6.1 Canal Headwork and Distribution System: Classification of
canals, canal alignment, canal losses, canal lining, water
logging and remedial measures for water logging.
6.2 Canal Structures Canal Falls and types of canal falls, canal
escapes and types of canal escapes, canal regulators and types
of canal regulators, canal outlets and types of canal outlets,
cross drainage works and types of cross drainage work.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Describe National water Policy, Calculate Crop water requirement and Classify
various types and methods of irrigation.
2 Estimate flood discharge and Runoff by traditional and modern usage tools for
planning and management of water resources projects .
3 Apply knowledge on ground water, well hydraulics to estimate the safe yield and
ground water potential
4 Analyze and design gravity dams and earthen dams with spillways for sustainable
development
5 Compare different silt theories related to irrigation channel and design the same.
6 Classify and Explain various canal structures and suggest remedial measure s for water
logging to save fertile irrigation
Page 93
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only four questions need to be solved in total.
Recommended Books:
1 Irrigation and Water Power Engineering: B.C. Punmia, PandeB.B.Lal, A.K Jain. Laxmi
Publications Pvt, Ltd. New Delhi.
2 Irrigation Engineering and Hydraulic Structures: S.K. Ukarande, Ane Books Pvt. Ltd.
ISBN -9789383656899.
3 Irrigation Water Resources and Water Power Engineering: P.N. Modi, Standard Book
House, Delhi, ISBN 978-81-87401 -29-0.
4 Irrigation Engineering and Hydraulics Structures: S. K. Garg, Khanna Publishers. Delhi.
5 Design of Irrigation Structures: S. K. Sharma, S. Chand and Co.
6 Theory and Design of Irrigation Structures: R. S. Varshney and R, C. Gupta, Nem Chand
7 Engineering for Dams, Vol. I to III: Crager, Justin and Hinds, John Wiley
8 Design of Small Dams: USBR.
9 Hydro Power Structures: R. S. Varshney, Nem Chand and Bross.
10 Concrete Dams: R. S. Varshney, Oxford and IBH Publishing Co.
Page 94
Semester VI
Course Code Course Name Credits
CEC603 Geotechnical Engineering -II 3
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
3 -- -- 3 -- -- 3
Theory Term Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of End
Sem Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hrs. -- -- -- 100
Rationale
Basic knowledge of analysis and design of foundations is very important for all civil engineers,
more so for geotechnical and structural engineers. Soil testing (both field and lab tests) and its
analysis are not only compulsory prerequisites for the analysis, design and construction of any
major structure but also h olds lucrative consultancy work and job opportunities in the field of civil
engineering. Immense research opportunities are also available in this field.
Objectives
1 Students will gain knowledge of consolidation theory.
2 Students will evaluate the shear strength characteristics of the soil. Moreover, they would
apply the knowledge for solving the related problems.
3 Students will analyze stability of slopes.
4 Students will analyze and evaluate lateral earth pressure.
5 Students will analyze and design shallow foundation.
6 Students will analyze and design deep foundation.
Page 95
Detailed Syllabus
Module Course Module / Contents Periods
1 Module Name - Consolidation of soils
06 1.1 Compressibility & settlement, comparison between compaction
& consolidation, concept of excess pore water pressure, initial,
primary secondary consolidation, spring analogy for primary
consolidation, consolidation test results, coefficient of
compressibility, coefficient of volume change, compression,
expansion, recompression indices, normally and over
consolidated soils.
1.2 Terzhaghi’s theory of consolidation (no proof) - assumptions,
coefficient of vertical consolidation, distribution of hydrostatic
excess pore water pr essure with depth & time, time factor,
relationship between time factor and degree of consolidation,
determination of coefficient of vertical consolidation, pre -
consolidation pressure.
1.3 Final settlements of a soil deposit in the field, time settlemen t
curve, field consolidation curve.
2 Module Name - Shear strength
05 2.1 Introduction, frictional cohesive strength, state of stresses in
soil mass, principal stresses, determination of stresses on an
inclined plane by using analytical and Mohr’s circle method,
important characteristics of Mohr’s circle.
2.2 Coulomb theory, Mohr -Coulomb theory - shear strength
parameters; Mohr -Coulomb failure envelope - relation between
major and minor principal stresses, total & effective stress
analysis.
2.3 Different types of drainage conditions UU, CU and CD: Direct
shear test, Triaxial compression test, Unconfined compression
test, Vane shear test; comparison between direct & triaxial
tests, interpretation of test results of direct shear & triaxial
shear tests stress -strain curves.
2.4 Determination of shear strength of soil - pull out test and
Introduction to liquefaction of Soils.
3 Module Name - Stability of Slopes
06 3.1 Introduction: Types of slopes, types of slope failures, factors of
safety.
3.2 Stability analysis of infinite slopes in i) cohesionless soil and
ii) cohesive soil under a) dry condition, b) submerged condition
and c) steady seepage condition along the slope.
Page 96
3.3 Stability analysis of finite slopes: i) Taylor’s stability number
ii) friction circle method iii) Swedish circle.
4 Module Name - Lateral Earth Pressure Theories
08 4.1 Introduction to Lateral Earth Pressure Theories: Concept of
lateral earth pressure based on vertical and horizontal stresses,
different types of lateral earth pressure
4.2 Rankine’s earth pressure theory: i) assumptions, ii) active and
passive states in cohesionless soil: effect of submergence,
effect of uniform surcharge, effect of inclined surcharge iii)
active and passive states in cohesive soil
4.3 Coulomb’s wedge theory: i) assumptions, ii) active and passive
states in cohesionless soil, iii) active and passive states in
cohesive soil
4.4 Rehbann’s Graphical Method (no proof)
4.5 Culmann’s Graphical Method (no proof)
5 Module Name - Shallow Foundations
08 5.1 Introduction: types of shallow foundations, definitions of
different bearing
Capacities
5.2 Theoretical methods of determining bearing capacity of
shallow foundations:
i) Terzaghi’s theory: assumptions, zones of failure, modes of
failure, ultimate bearing capacity equations for general and
local shear failure, factors influencing bearing capacity:
shape of footing and wat er table, limitations of Terzaghi’s
theory
ii) Vesic’s theory: bearing capacity equation I.S. Code
Method: bearing capacity equation
5.3 Field methods of determining bearing capacity of shallow
foundations: i) standard penetration test and ii) plate load test
6 Module Name - Pile Foundations
06 6.1 Introduction to pile foundations: necessity of pile foundations,
types of pile foundation.
6.2 Theoretical methods of determining load carrying capacity of
pile foundations: i) static formulae and ii) dynamic formulae
6.3 Field method of determining load carrying capacity of pile
foundations: pile load test
6.4 Group action of piles, settlement of pile groups, negative skin
friction
Total Hours 39
Page 97
Contribution to Outco me
On completion of this course, the students will be able to:
1 Evaluate the consolidation parameters for the soil.
2 Calculate the shear strength parameters for the soil.
3 Calculate the factors of safety of different types of slopes under various soil condition,
analyze the stability of slopes.
4 Calculate lateral earth pressure under various soil condition.
5 Calculate bearing capacity of shallow foundations using theoretical and field methods.
6 Calculate load carrying capacity of individual as well as group of pile foundation using
theoretical and field methods and pile settlement.
Internal Assessment (20 Marks):
Consisting Two Compulsory Class Tests - First test based on approximately 40% of contents
and second test based on remaining contents (approximately 40% but excluding contents
covered in Test I). Average of the two will be considered as IA marks.
End Semester Examination (80 Marks):
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the
curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 Soil Mechanics and Foundation: Dr. B.C. Punmia, Ashok Kumar Jain, Arun Kumar
Jain; Laxmi Publications
2 Soil Mechanics and Foundation Engineering: K.R. Arora; Standard publishers and
Distributors
3 Soil Mechanics and Foundation Engineering: V.N.S Murthy ; Saitech Publications
4 Geotechnical Engineering: C. Venkatramaiah; New age International
5 Theoretical Soil Mechanic: K. Terzaghi; John Wiley and Sons
6 Fundamentals of Soil Engineering: D. W. Taylor; John Wiley and sons
7 Relevant Indian Standard Specification Code: BIS Publications, New Delhi
8 Soil Mechanics in Theory and Practice: Alam Singh; Asia Publishing House
9 Geotechnical Engineerin g: Purushothama Raj; Tata McGraw Hill Publications
10 Basic and Applied Soil Mechanic: Gopal Ranjan and A.S. Rao; New Age International
Page 98
Semester -VI
Course Code Course Name Credits
CEC604 Environmental Engineering 04
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
04 - - 04 - - 04
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Every civil engineer must be acquainted with the principles of public health engineering,
purification of water, sewage collection, design of water and sewage treatment and develop
rational approaches towards sustainable waste management via appropriate treatment and
reuse. The course deals with the overall features and study of treatment of water, building
drainage, rain water harvesting, sewage treatment processes and solid waste management . The
course also lays emphasis on the knowledge of Air and Noise pollution.
Objectives
1 To demonstrate the necessary knowledge and concepts in the fields of w ater supply and
quality of water.
2 To impart necessary skill for the design and operation of various units of water treatment
facilities.
3 To recognize the necessary knowledge of good plumbing system , building drainage and
rainwater harvesting.
4 To demonstrate the necessary knowledge on domestic sewage and Sewerage system.
5 To develop a flow Content for sewage treatment and design its units.
6 To impart the basic understanding of Air pollution, noise pollution and solid waste so as
to control its adversity on ambient environment.
Page 99
Detailed Syllabus
Module Course Module / Contents Periods
1 Water Supply and Quality Of Water
04 1.1 Water supply: Water supply systems, water resources, types of
intake structures , distribution systems of water and distribution
layouts.
1.2 Quality of water: Introduction to pure water: potable,
wholesome, palatable, distilled, polluted and contaminate d
water, drinking water standards and characteristics of water,
water borne diseases .
2 Water Treatment
15 2.1 WTP: Typical layout of WTP, Aeration, Types of Aeration
systems, sedimentation, types of settling, tube settlers , design
of sedimentation tank .
2.2 Coagulation and flocculation: Principle of coagulation,
flocculation, Clari flocculator, coagulants aids.
2.3 Filtration: rapid sand filters, operation, cleaning and back -
washing, Entire design of rapid gravity filter with under
drainage system. Pressure filter: Construction and operation
2.4 Disinfection: Different methods of disinfection, chlorination
and chemistry of chlorination , chlorine demand, free and
combined chlorine, various forms of chlorine, types of
chlorination. Numerical to calculate quantity of required
chlorine doses.
2.5 Advanced and Miscellaneous Treatments : Water softening by
lime soda process and by base exchange method, Reverse
Osmosis, Activated carbon, Membrane filtration, Removal of
Iron and Manganese.
3 Building Water Supply, Drainage and Rainwater Harvesting
04 3.1 Building water supply: Water demands , Per capita Supply ,
Service connection from main, Water meter .
3.2 Building drainage: basic principles, traps -types, location and
function, Systems of Plumbing, anti siphonic and vent pipes.
3.3 Rainwater harvesting: Need for rainwater harvesting, Annual
potential, Roof -top rain water harvesting . Numerical on annual
rainwater harvesting potential.
Page 100
4 Domestic Sewage and Sewerage System :
08 4.1 Sewage: Introduction to domestic sewage, and storm water ,
System of sanitation, Physical and chemical characteristics,
decomposition of sewage, BOD, COD, numerical on BOD.
MPCB norms for disposal of sewage effluent.
4.2 Sewerage system: Systems of sewerage and their layouts:
Separate, Combined and partially combined system, merits and
demerits , self -cleaning velocity and non -scouring velocity,
Sewer - Shape, hydraulic design of sewers, Laying and testing
of sewers , manhole -location, necessity, types and drop
manhole, ventilation
5 Sewage Treatment
15 5.1 Treatment processes: Objective, methods of treatment, flow
sheets showing Preliminary, Primary, Secondary and Tertiary
treatment. Primary treatment: Screening, Grit removal, Oil and
Grease removal, settling tank .
Secondary Treatment Methods : Trickling filter - Principle,
Process description and Design of trickling filter. Activated
sludge process (ASP) - Principle, Process description,
Recirculation of sludge, (numerical), Sludge volume index.
5.2 Introduction to Biologic al Treatment: Aerated lagoons,
Oxidation ponds , oxidation ditches.
Self-purification of natural waterbodies s: Oxygen economy,
Disposal of treated effluent . Disposal of Raw and treated
sewage on land and water, DO sag curve.
5.3 Rural and Low -cost sanitation: Septic Tank and Soak Pit –
Operation, suitability and Design
6 Air Pollution , Noise Pollution and Municipal Solid Waste
Management
06 6.1 Air pollution: Composition of air, Quantification of air
pollutants, Air quality standards, Effect of air pollution on
Environment , Introduction to Air pollution control devices.
6.2 Noise pollution: Basic concept and measurement, Effects of
noise, and control methods , and numerical on sound level.
6.3 Municipal Solid Waste Management: Sources, storage,
treatment, disposal,5R Pr inciples.
Total 52
Page 101
Contribution to Outcome
On completion of this course, the students will be able to:
1 Analyse the quality of water and make outline of water Supply scheme.
2 Design the various units of water treatment plant and apply the advanced ,
miscellaneous treatments whenever necessary.
3 Build service connection of water supply from main and building drainage system at
construction site along with rain water harvesting layout.
4 Analyse and plan sewerage system along with test for sewer line.
5 Design the units of sewage treatment plant . Also, able to apply the knowledge of low-
cost treatment and stream sanitation.
6 Understand air pollution, noise pollution and functional elements of solid waste
management.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Site Visit:
The student s will visit to sewage treatment plant/ water treatment plant in the nearby vicinity
or in the city and prepare detailed report thereof. This report will form a part of the term work
Recommended Books:
1 Water Supply Engineering: S. K. Garg, Khanna Publication.
2 Water Supply Engineering: P.N. Modi, Rajsons Publication.
3 Water Supply and Sanitary Engineering: S.K. Hussain, Oxford & IBH Publication,
New Delhi
4 Environmental Engineering: B. C. Punmia , Laxmi Publications, New Delhi.
5 Solid waste management in developing countries: A.D. Bhide and B.B. Sundaresan
6 Environmental Engineering Vol II - Sewage Disposal and Air Pollution Engineering: S.
K. Garg, Khanna Publishers New Delhi
7 Wastewater Treatment - Concepts and Design Approach: G. L. Karia and R. A.
Christian
8 Integrated solid waste management, Tchobanog lous. Theissen and Vigil, McGraw Hill
Publication.
Page 102
Reference Books:
1 Manual on Wastewater Treatment 3rd Ed. Pub: CPH and Env. Engg. Organization,
Ministry of Urban Development, Govt. of India, New Delhi, 1991.
2 Plumbing Engineering, Theory and Practice: Patil S. M., Seema Publication, Mumbai.
3 Manual on Municipal Solid Waste Management: Ministry of urban development, New
Delhi.
4 Water Supply and Sewerage: E.W. Steel.
5 Manual on Water Supply and Treatment, (latest Ed.): Ministry of Urban Development,
New Delhi.
6 Water supply and pollution control: J.W. Clark, W. Veisman, M.J. Hammer,
International textbook company.
7 CPHEEO Manual on Water Supply and Treatment.
8 CPHEEO Manual on Sewage and Treatment.
9 Environmental Engineering: Peavy,H.S., RoweD.R., TchobanoglousG.; 1991, Tata -
Mcgraw Hill.
Page 103
Semester -VI
Course Code Course Name Credits
CEDLO6011 Department Level Optional Course -2
Rock Mechanics 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
The Civil Engineering structures are built on or through rocks. The design of structures depends
on the rock mass properties and the interaction between the rock and the structure. This
demands the study of deformation resulting from the strain of rocks in response to various
stresses working on them. The mechanisms and character of the deformation of rocks can be
investigated through laboratory experiments. The course wil l give an idea of in - situ testing of
the rock and observation of geological conditions that can affect the way a rock behaves when
subjected to loads and stresses.
Objectives
1 To provide basic knowledge of Rock -Mechanics to understand design aspects of various
structures on or through rocks.
2 To study the various classification schemes of rock masses and their application.
3 To study the physical properties of rocks and various lab test conducted on them to
determine the strength.
4 To determine properties and behavior of various types of rock under different loading
conditions.
5 To study bearing capacity, stress distribution and factor of safety within the rock.
6 To study the stability of rock slopes and design aspects of openings i n/on the rocks.
Page 104
Detailed Syllabus
Module Course Module / Contents Periods
1 Structural Geology and Data Interpretation
05 1.1 Introduction to Rock Mechanics and Importance
1.2 Geological classification of rocks
1.3 Description of discontinuities and their effect on rocks
1.4 Stereographic Analysis of structural Geology
2 Engineering Classification of Rocks and Rock Masses:
06 2.1 Classification of intact rocks. Rock mass classifications: Rock
Quality Designation (RQD), Rock Structural Rating (RSR),
Rock Mass Quality (Q system).
2.2 Strength and Modulus from classifications, classification based
on Strength and Modulus.
2.3 Geo-mechanics (RMR)} and Geo -engineering classification
2.4 Deere and Miller’s Engineering Classification
3 Laboratory Testing of Rocks: Field and Laboratory Tests on
Rocks
07 3.1 Determination of physical properties of rocks
3.2 Uniaxial Compressive Strength Test
3.3 Tensile Strength Test
3.4 Direct Shear Test and Triaxial Test
3.5 Slake Durability Test
3.6 Schmidt Rebound Hardness, Swelling Pressure and Free -Swell,
Void Index, Hydraulic fracture, Flat Jack Test
4 Strength, Modulus and Stress -Strain Responses of Rocks:
07 4.1 Factors influencing rock responses, Strength criteria for
isotropic intact rocks, Modulus of isotropic intact rocks.
4.2 Uni-axial Compressive Strength of intact anisotropic rocks,
Strength due to induced anisotropy in rocks, Compressive
Strength and Modulus from SPT.
4.3 Stress - strain models (constitutive models, elastic stress -strain
model, elastic -plastic stress -strain model, Visco -elastic Model.
5 Bearing Capacity of Rocks:
06 5.1 Estimation of bearing capacity (foundation on intact rock,
heavily fractured rock), UBC with Hoek -Brown criterion,
foundation on slope
5.2 Stress distribution in rocks, Factor of safety, strengthening
measures (concrete shear keys, bored concrete piles, tensioned
Page 105
cable anchors, concrete block at toe),
5.3 Settlement in rocks (from joint factor, for horizontal joints,
from field tests).
6 Stability of Rock Slopes & Opening in Rocks
08 6.1 Modes of failure, rotational failure, plane failure, wedge
method of analysis, buckling failure, toppling failure,
application of stereographic projection, Remedial measures.
6.2 Rock Bolting and Grouting: Methods to improve rock mass
responses, grouting in rocks, objectives, contact grouting,
consolidation grouting, process of grouting, grout requirement,
types of grout, stage grouting, grout curtain. Rock Bolting Rock
anchors.
6.3 Tunneling: Ground conditions in tunneling, Computing
structural discontinuities in rock masses, r equirement of lining
in tunnels, pressure tunnels and tunnels for other purposes,
application of stereographic projection.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Explain basic concepts of Rock -Mechanics and apply it to design aspects of various
Civil Engineering structures on or through the rocks.
2 Classify the rock masses and evaluate them for various Civil Engineering works.
3 Explain the laboratory testing of rocks and determine the physical properties and
strength of intact rocks and rock masses.
4 Explain the stress -strain responses of the rocks and influencing factors.
5 Determine the bearing capacity and factor of safety of rocks.
6 Determine the stability of slopes and underground excavations.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Page 106
Recommended Books:
1 Introduction to Rock Mechanics: Goodman, RE (1989), Canada, Jhon Wiley & Sons.
2 Rock Slope Engineering, Hoek, E and Bray, JW (1977), The Institution of Mining and
Metallurgy, London.
3 Rock Mechanics and Design of Structures on Rock: Obert, Leon and W. I. Duvall .
4 Engineering Rock Mass Classification, Singh, B and Goel RK (20011), Oxford, UK,
Elsevier Inc.
Reference Books:
1 Rock Mechanics in Engineering Practice: K. G. Stagg and O. C. Zienkiewicz , John
Willey and Sons, New York.
2 Rock Mechanics – Vol. I and II: Jumukis , Trans Tech Publication, USA.
3 Fundamentals of Rock Mechanics: Jaeger, JG, Cook, NGW and Zimmerman, RW
(2007) 4 th Ed., Singapore, Blackwell Publishing
4 Rock Mechanics and Design of Structures on Rock: Obert, Leon and W. I. Duvall.
Page 107
Semester -VI
Course Code Course Name Credits
CEDLO6012 Department Level Optional Course - 1
Biological Process and Contamination Removal 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Biological treatment processes are widely used in both developed and developing countries
to control and accelerate the natural process of organic matter decomposition. The process is
often used to treat biodegradable waste materials released from domestic, commercial and
industrial sources before they are disposed of. However, it is also observed to further treat the
wastewater for contamination removal in order to remove and treat toxic materials. The course
deals with the overall features and study of biological treatments of wastewater and
contamination removal. The course lays emphasis on complete updates of these processes and
knowledge related to design of treatment units.
Objectives
1 To understand quality, quantity, characteristics and treatment process of wastewater
generated from various sources
2 To understand the biological process and treatment of wastewater.
3 To provide students the necessary knowledge and concepts of advancements/ emerging
techniques of Microbial Growth Kinetics, Utilization of soluble substrate and
biotechnological remedies
4 To study and design the aerobic decomposition and its application in Aerobic Suspended
Growth Biological Treatment Systems.
5 To study and design the anerobic decomposition and its application in wastewater
treatment.
6 To develop rational approaches to wards natural and biotechnological methods for
contamination removal.
Page 108
Detailed Syllabus
Module Course Module / Contents Periods
1 Waste Water Generation, Collection and Conveyance
08 1.1 Introduction: Domestic waste water, Industrial Wastewater and
Stormwater , Conservancy and Water carriage system, Systems
of sewerage, Quantity and Quality of Wastewater .
1.2 Need for Analysis, Characteristics of wastewater: Analysis of
wastewater, Char acteristics of wastewater and sampling,
Composition, Biochemical characteristics, aerobic
decomposition, anaerobic decomposition,
1.3 Waste Water Treatment and Flow diagram: Treatment
processes: Objective, methods of treatment, flow sheets
showing Prel iminary, Primary, Secondary and Tertiary
treatment. Waste Water Treatment Plant and Effluent
Treatment Plants. Various combinations and options. Low -cost
treatment plant.
2 Introduction to Biological Treatment:
03 2.1 Overview of biological wastewater treatment, objectives of the
treatment, role of microorganisms, types of biological
processes for wastewater treatment, suspended and attached
growth systems.
3 Microbial Growth Kinetics
06 3.1 Microbial Growth Kinetics terminology, rate of utilization of
soluble substrates, rate of biomass growth with soluble
substrate, rate of oxygen uptake, effects of temperature, total
volatile suspended solids and active biomass, net biomass yield
and observed yield .
3.2 Biotechnological remedies - Bio-fertilizers, Physical, chemical
and Microbiological factors of composting, Health risk –
Pathogens, Odor management, Microbial cell/enzyme
technology, Adapted microorganisms, Biological removal of
Nutrients.
4 Aerobic Decom position:
08 4.1 Aerobic Suspended Growth Biological Treatment Systems:
Aerobic biological oxidation, process description,
environmental factors, Modifications of ASP: Complete Mix
activated sludge, Extended Aeration system, Oxidation Ditch
systems, Oxygen activated sludge , Oxidation ponds,
Stabilization ponds, Aerobic attached Growth Biological
Treatment -Trickling Filter.
4.2 Design of ASP, Trickling Filter, Oxidation Pond, Oxidation
Ditch and Aerated lagoons.
Page 109
5 Anaerobic Decomposition:
08 5.1 Anaerobic Decomposition: Mechanism of anaerobic
fermentation – a multistep process, Microbiology and
Biochemistry of Anaerobic processes, Substrate inhibition,
Stuck reactors, Standard rate, High rate and Multistage anoxic
digesters. Introduction to UASB.
5.2 Design of anaerobic treatment units: Anaerobic Lagoons
6 Natural and Biotechnological Methods of Contamination
Removal:
06
6.1 Natural Treatment Systems: Development of natural treatment
systems, Rapid infiltration systems, Overland Flow systems,
constructed wetlands, Floating aquatic plant treatment systems.
Introduction to engineering Fundamentals of Biotechnology.
Heavy Metal Removal using advance treatment methods –
Membrane filtration, Reverse Osmosis and Ion exchange.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Determine and analyze the characteristics of wastewater and decide the treatment for
wastewater.
2 Understand biological treatment process and necessity of contamination removal
3 Understand and apply the concepts of advancements/emerging techniques of Microbial
Growth Kinetics, Utilization of soluble substrate and biotechnological remedies.
4 Summarize the concept of aerobic decomposition and its applicati on in Aerobic
Suspended Growth Biological Treatment Systems
5 Summarize the concept of the anaerobic decomposition and its application in
wastewater treatment.
6 To derive the knowledge and develop rational approaches towards natural and
biotechnological Methods for contamination removal
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
Page 110
4 Only Four questions need to be solved.
Recommended Books:
1 Wastewater Engineering Treatment, Disposal, Refuse: Metcalf and Eddy, T.M.H.
Edition, New Delhi, 1995.
2 Environmental Engineering Vol II - Sewage Disposal and Air Pollution Engineering: S.
K. Garg, Khanna Publishers New Delhi.
3 Water supply and sanitary Engineering: Hussain S. K., Oxford and IBH Publication,
New Delhi.
4 Wastewater Treatment for Pollution Control and Reuse by Soli. J Arceivala (Author),
Shyam. R Asolekar.
5 Environmental Engineering: B. C. Punmia, Laxmi Publications, New Delhi.
6 Water Supply and Sewerage: E.W. Steel.
7 Introduction to Environmental Eng ineering, Vesilind, PWS Publishing Company
2000.
8 Introduction to Environmental Engineering: P. Aarne Vesilind, Susan M. Morgan,
Thompson.
9 Wastewater Treatment - Concepts and Design Approach: G. L. Karia and R. A.
Christian.
10 Basic Principles of Wastewater Treatment Book by Marcos Von Sperling.
Reference Books:
1 Manual on Wastewater Treatment 3rd Ed. Pub: CPH and Env. Engg. Organization,
Ministry of Urban Development, Govt. of India, New Delhi, 1991.
2 CPHEEO Manual on Sewage and Treatment.
3 Relevant Indian standard specifications and BIS publications.
4 Handbook of Water and Wastewater Treatment Plant Operations Book by Frank R.
Spellman
Page 111
Semester -VI
Course Code Course Name Credits
CEDLO6013 Department Level Optional Course -2
Construction Equipment & Techniques 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Machines have revolutionized every sphere of human being’s life. Engineering constructions
also have seen a drastic reformation due to introduction of various construction equipment and
techniques. This course provides an extensive overview of advanced equipment used in
construction industry and also discusses certain methods/techniques used to construct facilities
using these equipments . It makes the student aware of the equipment /techniques required while
constructing different kinds of civil engineering structures. Student will be introduced to some
emerging technologies in the field of Civil engineering which will make them more industry
ready.
Objectives
1 To understand the characteristics and complexities involved in large civil engineering
projects so that the equipment/technique requirements of a project can be listed out.
2 To know the various conventional techniques/equipments used in civil engineering
projects.
3 To get acquainted with the modern equipments/techniques which have replaced the
conventional ones.
4 To select the appropriate equipment/techniques in construction for large and heavy
engineering projects on the basis of suitability, availability, product ivity, output, initial and
operation cost, savings in time and other resources, etc.
5 To understand the characteristics and complexities involved in large civil engineering
projects so that the equipment/technique requirements of a project can be listed out.
6 To know the various conventional techniques/equipments used in civil engineering
projects.
Page 112
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction
06 1.1 Equipment v/s Labour, Standard and Special equipments ,
Types of costs related to equipments including related
numerical, Equipment life and Replacement decisions
including related numerical, Cycle time, Balancing of
equipments and related numerical.
1.2 Different categories of construction equipments used
conventionally with reference to available types and their
output, working mechanism, factors affecting their
performance and criteria for selecting a particular equipment:
Earthmoving and other hauling equipment, Pavers for road
construction. Numbering a nd Record maintaining of
Earthmoving and other hauling equipment’s; Pile driving
equipment; Applications of Air compressor. Dewatering
techniques for trenches; Stone crushing equipment.
2 Underground & Underwater Tunnelling
09 2.1 Various purposes for which tunnelling may be carried out,
Basic terms related to tunnelling. Conventional methods of
carrying out tunnelling in different types of soils/rocks.
Methods for dewatering tunnels.
2.2 Detailed Procedure for underwater tunneling. Modern methods
of tunnelling and detailed study of following equipments/
techniques in this regard.
Use of drones, construction robots for aerial surveys. Use of
GPS and remote sensing for setting out tunnel ali gnment.
Jumbo – used for drilling and blasting, Blasting Techniques for
quarrying stones for construction purpose. Diaphragm wall
construction and other ground stabilization methods. Vertical
shaft sinking machine (VSM). Tunnel Boring machine (TBM),
Micro tunneling . New Austrian tunnelling method (NATM).
Cut & cover method, Top to bottom construction. Tunnel lining
trolley. Tunnelling for Metro projects. Difference in Tunnelling
for Roads and Metros.
3 Modern Formwork Systems and Working Techniques in Limited
Space
06 3.1 Difference in conventional and modern systems of formwork
Mivan, Doka shuttering along with their advantages and
disadvantages. Modular shuttering, Slip and jump form.
3.2 High rise construction: Concrete making on mass scale,
pumping and placing booms. Tower cranes and the benefits
they offer for high rise construction. Range diagram.
Page 113
3.3 Prefabricated housing systems, Difficulties faced in the
installation and operation of all these systems. Emergency
housing for disaster management.
3.4 Working skills/tricks required for managing a site in
urban/restricted space environment. Techniques for controlled
demolition of buildings.
4 Equipments For Laying of Utility Lines, Bridge Construction &
Installation of Structural Steel Members.
06 4.1 Use of ground penetrating radar (GPR) for locating
underground utilities. Laying of pipes using pipeline insertion
system. Installation and operation of underground power
transmission lines as well as overhead transmission towers.
4.2 Incremental launching method and balanced cantilever method
of bridge/flyover construction with reference to the recent
infrastructure developed in the local and global context.
4.3 Equipments/techniques used for connecting structural steel
components of bridge decks, terminals, malls, stadiums, car
sheds, etc.
5 Equipments/ Techniques for Setting Up of Power
Generation/Supply Structures.
06
5.1 Hydropower station. Tidal power plants. Desalinization plants.
Thermal power station. Solar power station. Atomic power
generation. Installation and operation of wind mills.
Construction of a fuel station.
6 Equipments/ Techniques for Construction of Transporting
Facilities
06 6.1 Construction of railway lines using track laying machine.
Methods, techniques and equipments involved in the
construction of Metro, mono and maglev trains. Connecting
link between underground and overhead metro systems. 5D
BIM integration in Metro projects .
6.2 Equipments required for construction and operation of an
airport and sea port. Application of Drones, GIS, GPS and BIM
for monitoring project progress/working of Airports and
Seaports. Piling Equipment’s for Jetty Construction.
6.3 Light Detect ion and Ranging (Lidar) Technique for Railways/
Highways/ Bullet train alignments.
Total 39
Page 114
Contribution to Outcome
On completion of this course, the students will be able to:
1 Understand the use/applications of various conventional construction equipments and
select the best out of them for a particular site requirement.
2 Know modern methods/equipments used for underground as well as underwater
tunnelling.
3 Compare conventional and modern methods of formwork and get acquainted with
techniques used on sites with restricted space.
4 Understand the techniques involved and the equipments required thereof for laying of
utility lines, bridge construction and installation of structural steel members.
5 Gain knowledge about the setting up of different kinds of the power generating
structures.
6 Get acquainted with the equipments/ techniques for construction of transporting
facilities.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 Construction Equipment & Planning. Purifoy, R.L & Ledbetter McGraw Hill
2 Construction Equipment & its Management. Sharma, S. C. Khanna Publishers
3 Tunnel Engineering Handbook Thomas R. Kuesel, Elwyn H. King, John O. Bickel
Springer
4 Practical tunnel construction Gary B. Hemphill Wiley Publishers
5 Success with drones in Civil Engineering Brett Hoffstadt Kindle
6 Construction Technology for Tall Buildings Michael Yit Lin Chew World Scientific
7 The prefabricated home Colin Davies Reaktion Books
8 Literature/specifications/downloadable videos available on Doka and Mivaan
shuttering websites.
9 Accelerated Bridge Construction: Best Practices and Techniques Mohiuddin Ali Khan
BH Elsevier
Page 115
Reference Books:
1 Design and Construction of Nuclear Power Plants Rüdiger Meiswinkel, Julian
Meyer, Jürgen Schnell Wiley Publishers
2 Energy and Power generation handbook K.R Rao ASME Press
3 Magnetic Levitation Hyung -Suk Han Dong -Sung Kim Springer
4 Metro Rail Projects in India M Ramachandran Oxford
5 BIM Handbook Eastman,Teicholz,Sacks,Liston John Wiley and Sons
6 IRC:43 -2015 Recommended Practice for Plants, Tools and Equipment Required for
Construction and Maintenance of Concrete Roads (First Revision).
7 IRC-2018 Pocket book for Road Construction Equipment.
8 IRC: SP -97- 2013 Guidelines on Compaction Equipment for Roads Works
Page 116
Semester -VI
Course Code Course Name Credits
CEDLO6014 Department Level Optional Course -2
Urban Infrastructure Planning 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Indian cities are currently expanding at a rapid rate, and are therefore facing immense pressure
for the improvement of their services and infrastructure. Without coordination and planning
for the anticipated spatial growth and densification, the infrastru cture services are neglected.
Such growth areas can become under -serviced places of the cities, one from which many
problems of the city stem: water, sanitation and waste problems, uncontrolled pests, and crime
due to poor access to water and sanitation se rvices. To address the emerging issues of urban
centre, there is a pressing need to train urban infrastructure specialists who can
comprehensively plan for city’s growing infrastructure needs and formulate projects for
efficient infrastructure service deli very for existing areas. There are ample urban
infrastructure challenges and opportunities in terms of planning; effective policy, program and
project formulation for well -trained young urban infrastructure professionals with specific
domain knowledge
Objectives
1 Describe an infrastructure system using accurate terminology;
2 Demonstrate an understanding of the main concepts and principles of infrastructure
planning;
3 Identify the key features of a sustainable infrastructure system and explain how they
promote sustainable development;
4 Apply analytical tools for infrastructure planning;
5 Critically evaluate infrastructure cases/projects/proposals through the lens of
sustainability;
6 Identify the gaps between theoretical principles of sustainable infrastructure and their
application in practices
Page 117
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction to Planning
04 1.1 Origins and growth of cities, effects of cultural influence on
physical form; Human settlements as an expression of
civilizations; Basic elements of the city; Concepts of space,
time, scale of cities.
1.2 Contribution of housing to micro and macro econ omy,
contribution to national wealth and GDP, housing taxation,
national budgets, fiscal concessions; need of affordable
housing for urban poor, concept of RERA
2 Urban Economics
06 2.1 General introduction to principles of economics and public
finance. Importance of economics in Urban Development and
Planning
2.2 Industrial location policies, any other economic activity base
policies and their impact on urban development, Role of land
economics in preparation of Urban Development plans.
Relev ant case studies of Urban Land Economics.
2.3 Economic growth and development, quality of life; Human
development index, poverty and income distribution,
employment and livelihood; Economic principles in land use
planning; Policies and strategies in economic planning,
balanced versus unbalanced growth, public sector dominance;
changing economic policies, implications on land.
3 Infrastructure Planning
12 3.1 Role of Infrastructure in Development, Elements of
Infrastructure (physical, social, utilities and services); Basic
definitions, concepts, significance and importance; Data
required for provision and planning of urban networks and
services; Resource analysis, provision of infrastructure, and
land requireme nts; Principles of resource distribution in space;
Types, hierarchical distribution of facilities, Access to
facilities, provision and location criteria, Norms and standards,
etc.
3.2 Zoning, Various growth patterns of town, Housing layouts and
road networks in town, Urban aesthetics and landscaping,
MRTP and Land Acquisition Acts
Planning and Management of Water, Sanitation and Storm
Water; Water – sources of water, treatment and storage,
transportation and distribution, quality, networks, distribution
losses, water harvesting, recycling and reuse, norms and
standards of provision, institutional arrangements, planning
Page 118
provisions and management issues;
Sanitation – points of generation, collection, treatment,
disposal, norms and standards, grey water disposal, institutional
arrangements, planning provisions and management issues.
Storm water – rainfall data interpretation, points of water
stagnation, system of natural drains, surface topography and
soil characteristics, ground water replenishment, storm water
collection and disposal, norms and standards, institutional
arrangements, p lanning provisions and management issues;
3.3 Solid Waste Disposal and Management Basic principles,
generation, characteristics, collection, disposal, management
3.4 Fire and Electrification, and Social Infrastructure Planning for
fire protection, services and space standards, location criteria;
Planning for Education, health, civic, cultural infrastructure
and facilities for transport and other miscellaneous
infrastructure services
3.5 Planning for Education, health, civic, cultural infrastructure
and facilities for transport and other miscellaneous
infrastructure services
4 Traffic and Transportation Planning
07 4.1 Evaluation of urban structure: Transport system, infrastructure
and management, transport systems and their types, design and
operating characteristics, urban road hierarchy, planning, and
management criteria for road and junction improvements,
arterial im provement techniques.
4.2 Traffic management, mass transit system: Problems and
prospects. Review of existing traffic management schemes in
Indian cities. Case study of various metro rail project envisaged
for Mumbai, Navi Mumbai & Pune.
4.3 Economic evaluation: pricing and funding of transport services
and systems, economic appraisal of highway and transport
projects. Techniques for estimating direct and indirect road user
costs and benefit value of time
4.4 Intelligent transport system (I TS) its types and applications
5 Urban Management and Governance
06 5.1 Introduction to Development Management and Urban
Governance - Concept, approaches, components, interface with
national goals and political economic system. Urban
Development Management Strategies, Tools and Techniques;
organizations involved Land and Real Estate Development
Economic concepts of land, Land Pricing / valuation; Urban
reforms and acts and policies. Overview of Urban Governance
Definition, concepts, co mponents, government and
governance, hierarchy and structure, forms of governance,
process of inclusion and exclusion.
Page 119
5.2 Information System and Urban Reforms Spatial and Non -
spatial information systems;
Use of GIS in overlaying infrastructure facilities, use of remote
sensing in identifying and mapping urban structures.
5.3 Present organizations and involved in urban g overnance with
focus on MCGM, TMC and CIDCO. Urban Local Governance
and Participatory Processes System, structure, functions,
powers, process and resource, performance, interface with
NGO’s, other agencies.
6 Environmentally Safe and Disaster Resilient Infrastructure
04 6.1 Frame work, statement prediction and assessment of impacts of
air, water, noise, cultural and socio -economic environment.
Methods of impact analysis, public participation.
Environmental protection international and national agencies
and legislation,
Environment Impact Assessment. Urban Heat Island Effect,
Effect of uncontrolled growth of town
6.2 Disaster response planning, roles and responsibilities of various
agencies Emergency operation support and management
Planning for Disaster Prone Areas, Planning requisites for
disaster prone areas and preventive measures, Vulnerability
analysis
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Explain the concepts related to planning of modern cities, GDP contribution, RERA,
affordable housing
2 Elaborate the economics involved in urban infrastructure planning
3 Envisage the various elements required for infrastructure development of a city and
describe the concepts, significance and importance of each
4 Evaluate technical, social and economic feasibility of transportation projects within
cities
5 Demonstrate mo dern tool usage for urban management and governance
6 Design environmentally safe and disaster resilient infrastructure
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
Page 120
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 The Urban and Regional Planning Reader, edited by Eugenie L. Birch, Published by
Routledge, 2008; ISBN 978 -0-415-319
2 Housing: The Essential Foundations, edited by Dr. Paul Balchin, Paul Balchin,
Maureen Rhoden, Edition Routledge, DOI https://doi.org/10.4324/9780203010426 ,
eBook ISBN 9780203010426
3 New Urban Housing by Hilary French, Publisher: Yale University Press,
ISBN0300115784 (ISBN13: 9780300115789)
4 Sociology: A Brief Introduction, by Richard T. Schaefer, Publisher: McGraw -Hill
Education, ISBN 10:1259425584, ISBN 13: 9781259425585
5 Sociology: Principles of Sociology with an Introduction to Social Thoughts, by Rao
C.N. Shankar, S. Chand Publication
6 Projects: Prepara tion, Appraisal, Budgeting and Implementation by Prasanna Chandra,
Tata McGraw -Hill; ISBN0074516280 (ISBN13: 9780074516287)
7 Introduction to Transportation Planning, by B. Bruton, Michael J. Bruton; Published
by Hutchinson Radius; ISBN0091580412 (ISBN13: 9780091580414)
Reference Books:
1 Modern Economics by H.L. Ahuja, 19th Revised Edition, Published by S.Chand (G/L)
& Company Ltd
2 Economics, An Introductory Analysis by Paul A. Samuelson, William D. Nordhaus,
Published July 27th 2004 by Irwin/McGraw -Hill (first published 1948),
ISBN0072872055 (ISBN13: 9780072872057)
3 Modelling Transport, by de Dios Ortuzar and Luis G. Willumsen, 4th Edition, Wiley
Publication
4 Principles of Urban Transport Systems Planning, by B.G. Hutchinson, Publish er:
Scripta Book Co.; ISBN0070315396 (ISBN13: 9780070315396)
5 Traffic Engineering and Transport Planning, L. R. Kadiyali, Khanna Publishers, 1983
6 Remote Sensing and GIS, by Basudeb Bhatta, second Edition, Oxford University press
7 NEPA and Environmental Planning: Tools, Techniques, and Approaches for
Practitioners; Charles H. Eccleston; CRC Press
8 Planning for Disaster: How Natural and Manmade Disasters Shape the Built
Environment, by William Ramroth; Publisher: Kaplan Business; Original e dition;
ISBN -13: 978 -1419593734.
Page 121
Semester -VI
Course Code Course Name Credits
CEDLO6015 Department Level Optional Course -2
Open Channel Flow 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Civil engineers deal with the analysis and design of irrigation systems which include dams,
weirs, barrages, canals, drains and other supporting systems, for which good knowledge of
dynamics of open channel flow is very much essential. Hence this course is desig ned to study
different types of flow like uniform flow, non - uniform flow, spatially varied flow, and
unsteady flow occurring in open channels. Competencies developed by this course would
therefore be useful for students to handle and solve the practical p roblems/ issues in the field
of Water resource management, Water shed Management etc. It is expected that the students
will be better equipped to address various engineering problems related to hydrology and
hydraulics.
Objectives
1 Understand the nature of flow, explain the basic concepts of uniform flow and to design
the best hydraulic sections in open channel.
2 Apply the Energy concepts of fluid in open channel and demonstrate various flow
measurement devices in open channels.
3 Develop Dynamic equation to compute the flow profiles for Gradually varied flow and
classify water profiles in prismatic channels with different slope conditions.
4 Illustrate the causes of Rapidly varied flow, predict the formation of hydraulic jump a nd
its applications.
5 Determine different types of spatially varied flow with varying discharges and
characteristics of water surface profiles.
6 Study and analyze the temporal flow variations in open channel and the formation of
surges.
Page 122
Detailed Syllabus
Module Course Module / Contents Periods
1 Uniform Flow
07 1.1 Flow through open channel, Types of channels, open and
covered channels, Classification of flow in channel,
Geometrical properties, velocity distribution in a channel
section
1.2 Uniform flow in open channels, Discharge through open
channel, Manning’s and Chezy’s Equation, Determination of
roughness coefficients,
1.3 Determination of Conveyance of a channel, Hydraulic mean
depth, Normal depth and Normal velocity, computation of
uniform flow
1.4 Most economical sections of prismatic channels, condition for
maximum velocity in a circular channel, condition for
maximum discharge in a circular channel
2 Energy -Depth Relationships
07 2.1 Specific energy, Specific energy curve, Depth - Discharge
diagram, critical depth, critical slope, critical flow, alternate
depths
2.2 Condition for maximum discharge for a given value of Specific
energy
2.3 Momentum in open channel flow - Specific force, specific force
diagram, Dimensionless specific force diagram,
2.4 Critical flow and its computation, Application of specific
energy and discharge diagrams to channel transitions
2.5 Metering Flumes - Venturi flume, Standing wave flume,
Parshall flume, Determination of mean velocity of flow,
Measurement of discharge in Rivers
3 Non-Uniform Flow: Gradually Varied Flow
07 3.1 Dynamic equation of Gradually Varied Flow (GVF) in
rectangular and wide rectangular channels
3.2 Types of slopes - channel bottom slopes and water surface
slopes, classification of channel bottom slopes and surface
profiles
3.3 Characteristics of surface profiles, Backwater curve and
drawdown curve
3.4 Computation of GVF -Direct Step and Standard step method,
Numerical methods, Graphical Integration method
Page 123
4 Non-Uniform Flow: Rapidly Varied Flow
07 4.1 Rapidly varied flow (RVF), Hydraulic Jump, Momentum
equation for the jump
4.2 Hydraulic jump in a rectangular channel, Froude Number
before and after jump, Classification of jumps, Characteristics
of jump in a rectangular channel
4.3 Jumps in non -rectangular channel, applications of jump,
location of jump, surges in open channel
4.4 Use of RVF for flow measurement purpose -Sharp crested weir,
Broad crested weir, Ogee spillway, sluice gate
5 Spatially Varied Flow
06 5.1 Importance of Spatially Varied Flow (SVF), Causes,
Continuity, Momentum and Energy Equation
5.2 Water surface profiles, Applications,
Differential Equation for SVF with increasing and decreasing
discharge
5.3 Relevant case studies
6 Unsteady Flow
05 6.1 Basic concepts of Gradually varied unsteady flow, Rapidly
varied unsteady flow
6.2 Positive and negative surges
6.3 Relevant case studies
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Describe the basic nature of flow in open channels, analyze the behaviour of flow and
apply basic theories to design the optimum channel sections.
2 Demonstrate the energy concepts in open channel and its practical applications.
3 Apply dynamic equation for Gradually varied flow (GVF) and evaluate water profiles
at different conditions in prismatic channels.
4 Differentiate between GVF and Rapidly Varied Flow (RVF), analyze hydraulic jump
in open channel and its importance.
5 Explain the spatially varied flow and classify water profiles.
6 Discuss the temporal variations of flow in GVF and RVF in open channel.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
Page 124
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 Flow in Open channels: K. Subramanya, Tata Mc Graw -Hill Publishing Co. Ltd., New
Delhi
2 Flow through Open channels: Rajesh Srivastava, Oxford University Press
3 Flow through Open channels: K. G. Ranga Raju, Tata Mc Graw -Hill Publishing Co.
Ltd., New Delhi
4 Fluid Mechanics and Hydraulics: Dr S.K. Ukarande, Ane’s Books Pvt. Ltd., (Revised
Version 2012)
5 Hydraulics & Fluid Mechanics: Modi P.N. & Seth S.M, Standard book house, New
Delhi
Reference Books:
1 Open channel Hydraulics: Chow, V.T., McGraw Hill International, New York
2 Open Channel Flow: Henderson F.M., McGraw Hill International
3 Open Channel Flow: M. Hanif Chaudhry, Prentice Hall of India.
4 Open channel Hydraulics: French, R.H., McGraw Hill International
Page 125
Semester -VI
Course Code Course Name Credits
CEDLO6016 Department Level Optional Course - 1
Computational Structural Analysis 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
This subject deals with the conceptual applications o f principles of mechanics of rigid and deformable
bodies in Structural Engineering.
Objectives
1 To understand basic concepts of Matrix Methods of Structural Analysis and application of
approximation techniques (Numerical Methods) in analysis of Structural Member
2 To analyze the behavior of structural members viz beams/plane trusses/ continuous beams/
portal frames
Detailed Syllabus
Module Course Module / Contents Periods
1 Basic concepts of structural analysis and methods of solving
simultaneous equations
04 1.1 Introduction, Types of framed structures
1.2 Static and Kinematic Indeterminacy, Equilibrium equations
1.3 Compatibility conditions, principle of superposition, Energy
principles, Equivalent joint loads
1.4 Methods of solving linear simultaneous equations - Gauss
elimination method, Cholesky method and Gauss - Seidel
method.
Page 126
2 Fundamentals of Flexibility and Stiffness Methods
07 2.1 Concepts of stiffness and flexibility
2.2 Local and Global coordinates
2.3 Development of element flexibility and element stiffness
matrices for truss, beam and grid elements
2.4 Force - transformation matrix
2.5 Development of global flexibility matrix for continuous beams,
plane trusses and Rigid plane frames
2.6 Displacement - transformation matrix, Development of global
stiffness matrix for continuous beams, plane trusses and rigid
plane frames.
3 Analysis Using Flexibility Method (Including Secondary Effects)
07 3.1 Continuous beams, plane trusses and rigid plane frames
4 Analysis Using Stiffness Method (Including Secondary Effects)
07 4.1 Continuous beams, plane trusses and rigid plane frames
5 Direct stiffness Method
07 5.1 Stiffness matrix for truss element in local and global
coordinates
5.2 Analysis of plane trusses
5.3 Stiffness matrix for beam element
5.4 Analysis of continuous beams and orthogonal frames.
6 Finite Element Method
07 6.1 Historical Background – Mathematical Modeling of field
problems in Engineering
6.2 Governing Equations – Discrete and continuous models
6.3 Boundary, Initial and Eigen Value problems – Weighted
Residual Methods – Variational Formulation of Boundary
Value
6.4 Basic concepts of the Finite Element Method.
6.5 One Dimensional Second Order Equations – Discretization –
Element types - Linear and Higher order Elements – Derivation
of Shape functions and Stiffness matrices and force vectors -
Assembly of Matrices – Solution of problems from solid
mechanics.
Total 39
Page 127
Contribution to Outcome
On completion of this course, the students will be able to:
1 Formulate force displacement relation by flexibility and stiffness method
2 Analyze the plane trusses, continuous beams and portal frames by transformation
approach
3 Analyze the structures by direct stiffness method
4 Explain the basics of finite element formulation.
5 Apply finite element formulations to solve one dimensional Problems
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 Matrix Methods of Structural Analysis, S. S Bhavikatti, WILEY
2 Matrix Analysis of Framed Structures, Weaver, W., and Gere, J.M., CBS Publishers
and distributors pvt. Ltd., 2004.
3 Computational Structural Mechanics, Rajasekaran, S., and Sankarasubramanian, G.,
PHI, New Dehi, 2001.
4 Introductions to Matrix Methods of Structural Analysis, Martin, H, C., McGraw -Hill,
New York, 1966.
5 Structural Analysis A Matrix Approach, G. S. Pandit, S. P. Gupta, TATA McGraw
Hill
6 Matrix Computer Analysis of Structures, Rubinstein, M.F., Prentice -Hall
Reference Books:
1 Introductory Methods of Numerical Analysis, S S. Sastry , ASIN : 8120345924,
Publisher -Prentice Hall India Learning Private Limited.
2 Introduction to the Finite Element Method, Desai Abel, CBS Publishers and
distributors
3 Introduction to Finite Elements in Engineering, Chandrupatala, Belugundu, Pearson
Education Publisher : Pearson; 4th edition (20 December 2011)
4 Numerical Methods for Engineers, Steven Chapra, Tata McGraw Hill
Page 128
Semester -VI
Course Code Course Name Credits
CEDLO6017 Department Level Optional Course -2
Traffic Engineering and Management 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Traffic Engineering Management follows the Transportation Planning and is the specialized
branch of the Highway Engineering, which introduces the concepts of characterizing traffic,
various modeling approaches, and design of facilities to control and manage traffic. A key
feature of the course is that it is well connected with the current design and analysis practice
stipulated in national standards, and manuals. Therefore, it deals with the application of
scientific principles, tools, techniques and findings for safe, rapid, economical and efficient
movement of p eople and vehicles.
Objectives
1 To understand the concepts of traffic characteristics, traffic surveys to be conducted for
planning any transportation network or judging the adequacy of the existing one
2 The application of various statistical tools to the analysis of the large data base emerging
out of extensive traffic surveys and transportation and traffic planning.
3 To understand the concept of various features of the intersection infrastructures, their
necessity, pros and cons, design or planning principles and subsequently, to design / plan
the features such as channelization, island, speed change lanes and parking facility.
4 To understand the concept of highway capacity and such other components such as
Passenger Car Un it and Level of Service affecting the Capacity; and Speed - Flow - Density
Relationship and various theories describing these relationships.
5 To understand the importance of Highway Safety and implementation of Traffic System
Management (TSM) Measures and subsequent to study the various Traffic Control Devices
and aspects of Highway Lighting.
6 To explore the future of traffic engineering in the form of Intelligent Transportation
system
Page 129
Detailed Syllabus
Module Course Module / Contents Periods
1 Traffic Characteristics and Surveys
03 1.1 Scope, Traffic Elements - Characteristics -vehicle, road user
and road - Traffic studies -speed & delay, traffic volume, O &
D, parking and accidents - Sample size, study methodology -
Data analysis & inferences.
2 Application of Statistics in Traffic Engineering
05 2.1 Various probability distributions & their applications -
Parameter estimation - Hypothesis testing - Random variables
2.2 Estimation and analysis of simple regression models -
Correlation coefficients - Analysis of correlation coefficients
2.3 Application of queuing theory as applied to traffic flow
problems for study state conditions
3 Intersection Design
10 3.1 Types of intersections - Conflict diagrams –Control hierarchy -
Design of rotaries (Indo -HCM 2017) & at -grade intersections
– Signal design as per IRC:93 - Grade separated intersections &
their warrants, coordination of signals, types of area traffic
control
4 Traffic Flow Theory
10 4.1 Measurement, microscopic and macroscopic Study of Traffic
Stream Characteristic -Flow, Speed and Density; pace – Time
diagram, Headways, Speeds, Gaps and Lags; gap acceptance.
Fundamental Equation of Traffic Flow, Speed -Flow -Density
Relationships, Shock Wa ve Theory Passenger’s car units,
Factors affecting PCU and methods to determine PCU, level of
service, factor affecting capacity and level of service. Capacity
and level of service suggested for different road facilities as
discussed in Indo -HCM 2017, revi ew of flow density speed
studies, Light hill and Whitham’s theory, fundamentals of
traffic stimulation modeling.
5 Traffic Management and Road safety Audit
07 5.1 Various measures for traffic systems management and travel
demand management -Congestion management -cost effective
Management, their scope, relative merits and demerits.
(Pedestrians and Cyclist Management) (IRC SP:55 -2014)
5.2 Highway Lighting: Important definitions, law of illumination,
discernment by artificial lighting, mounting height, spacing,
lantern arrangements, types of lamps, lighting of some
important highway structures.
5.3 Accidents: Accident cause, recording system, analysis and
Page 130
preventive measures, accident cost, alternative methodologi es
for calculation.
5.4 Road Safety Audit: Global & Local perspective – Road safety
issues – Road safety programmers – Types of RSA, planning,
design, construction & operation stage audits – Methodology –
Road safety audit measures, road safety audit pr ocess as per
IRC: SP -88-2010
6 Intelligent Transportation System
04 6.1 Overview of ITS implementations in developed countries, ITS
in developing countries. Study of IRC: SP -110-2017
6.2 Historical Background, Benefits of ITS – Introduction to
Automatic Vehicle Location (AVL), Automatic Vehicle
Identification (AVI), Geographic Information Systems (GIS),
Traffic control and monitoring aspects.
6.3 Application of ITS: Advanced Traffic Management Systems
(ATMS) Advanced Vehicle C ontrol Systems (AVCS), Public
Transportation Systems (APTS), Advanced Rural
Transportation Systems (ARTS), Automated Highway Systems
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 Understand different characteristics of the road users and vehicles from their
consideration and view point in the traffic engineering and transportation planning.
2 Conduct different traffic surveys, analyzing the data collected as a part of such studies
and interp reting it with the help of the different statistical models.
3 Explain the concepts of PCU and LOS, their implication in determination of the
capacity using Speed -Flow -Density relationships.
4 Discuss the aspects associated with road safety, its audit and different TSM measures.
5 Discuss transportation planning and ascertain the financial viability of any
transportation network in the inception stage itself.
6 Improve the effectiveness and efficiency of transportation systems through advanced
technologies in Information systems and communication.
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
Page 131
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 Kadiyali , L.R., Traffic Engineering and Transport Planning, Khanna Publishers, New
Delhi, 2002.
2 Srinivasa Kumar .R ,Introduction to Traffic Engineering,The Orient Blackswan;south
Asian Edition,2018.
3 Chakroborty P., Das N., Principles of Transportation Engin eering, PHI,New
Delhi,2003
4 Khanna S.K., Justo C.E.G., Highway Engineering, Nem Chand & Bros., Roorkee,
2001
5 Khisty C J,LallB.Kent; Transportation Engineering -An Introduction, Prentice -Hall,NJ,
2005
6 May, A.D., Traffic Flow Fundamentals, Prentice – Hall, Inc., New Jersey,1990.
7 O’Flaherty C A, Highways - Traffic Planning & Engineering, Edward Arnold, UK
8 Drew, D.R., Traffic Flow Theory and Control, McGraw -Hill, New York.
9 Benjamin J. R., Cornell C. A., Probability Statistics and Decision for Civil Engineers,
McGraw -Hill, 1970.
10 Asad J. Khattak , Intelligent Transportation Systems: Planning, Operatio ns, and
Evaluation, CRC Press
Reference Books:
1 Transportation Engineering and Planning Papacostas, C. S., Prevedouros, P. D., PHIL
earning Pvt. Ltd.
2 Transportation Engineering: Khisty, C.J. and Lall, K.B.; PHI Learning Pvt.Ltd.
3 Introduction to Urban Transport Systems, Planning: Hutchinson, B.G.;McGraw -Hill.
4 Economics of Transportation: Fair and Williams, Harper and Brothers, Publishers,
NewYork.
5 Highway Capacity Manual, Transportation Research Board, National Research
Counc il, WashingtonD.C.
6 Relevant IRC Codes amended time to time.
Page 132
Semester -VI
Course Code Course Name Credits
CEDLO6018 Department Level Optional Course -2
Introduction to Offshore Engineering 03
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
03 - - 03 - - 03
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
20 20 20 80 3 Hours - - - 100
Rationale
Offshore Engineering discipline deals with the design and construction of structures intended
to work in the ocean environment. The majority of offshore structures are used in the Oil and
Gas industry. Offshore construction is the installation of structures and facilities in a marine
environment. Civil Engineering graduates will be able to work in the specialized field of ocean
and coastal environment.
Objectives
1 To understand the complexities in offshore construction and obtaining resources from the
ocean.
2 To addresses the general engineering concepts that are fundamental to offshore
engineering.
3 To understand types of sites and platform structures, key engineering systems and ocean
environmental monitoring
Detailed Syllabus
Module Course Module / Contents Periods
1 Introduction:
05 1.1 History and current state of the art of offshore structures, Definition
of Offshore Structures, Met ocean Engineering: wind, wave and
current loads on offshore structures
2 Environment & Construction:
06
2.1 Offshore environment, Construction and launching, offshore
project management,
3 Ocean Construction: 06
Page 133
3.1 Types of Platforms: Jackets, Tension Leg Platforms (TLP),
Semisubmersibles, Jack -ups, Concrete Gravity, deep water
construction in ocean, offshore site investigations
4 Offshore Pipelines:
06 4.1 Hydrostatic, hydrodynamic analysis and structural design
5 Buoys and Mooring systems:
08 5.1 Buoys and Mooring systems Mooring configurations, advantages
and disadvantages
6 Design Criteria:
08 6.1 Introduction to probabilistic design, extreme load & strength &
fatigue, basics of anchoring and mooring system, riser system,
Scaling laws & Model testing, Challenges in Deepwater testing:
deep -water installations, constructions challenges.
Total 39
Contribution to Outcome
On completion of this course, the students will be able to:
1 To know various offshore construction methodologies
2 To addresses the general engineering concepts during construction stages.
3 To handle complexities and key engineering systems in ocean environment
Internal Assessment 20 Marks
Consisting of two Compulsory Class Tests –
First test based on approximately 40% of contents and second test based on remaining contents
(approximately 40% but excluding contents covered in first test).
Average of marks will be considered for IAE.
End Semester Examination 80 Marks
Weightage of each module in end semester examination will be proportional to number of
respective lecture hours mentioned in the curriculum.
1 Question paper will comprise of total six questions, each carrying 20 marks.
2 Question 1 will be compulsory and should cover maximum contents of the curriculum.
3 Remaining questions will be mixed in nature (for example if Q.2 has part (a) from
module 3 then part (b) will be from any module other than module 3).
4 Only Four questions need to be solved.
Recommended Books:
1 Subrata K. Chakrabarti (2005): Handbook of offshore engineering Volume –I & II,
Elsevier, The Boulevard Langford Lane, Kidlington, Oxford OX5 l GB, UK.
2 Deo M C (2013):Waves and Structures, http://www.civil.iitb.ac.in/~mcdeo/waves.html
3 American Petroleum Institute, Recommended Pract ice for Planning, Designing and
Constructing Fixed Offshore Platforms - Load and Resistance Factor Design, 1st
Edition, 1993. (TP690.A642 RP2A -LRFD)
4 American Petroleum Institute, Recommended Practice for Planning, Designing and
Constructing Fixed Offshore Platforms - Working Stress Design, 21st ed., 2000.
(TP690.A642 RP2A -WSD).
Page 134
Semester -VI
Course Code Course Name Credits
CEL601 Design and Drawing of Steel Structure s (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective s:
1 To estimate the design loads on steel structures as per IS 875
2 To analyze the member forces by any suitable method.
3 To design the members for axial, flexure and shear forces.
4 To prepare the detailed design report and fabrication drawings by manual or CAD
software.
Course Outcomes:
At the end of the course, learner will be able to:
1 Calculate dead, live and wind loads on the structure.
2 Analyze the structure by analytical/graphical method.
3 Use steel table for selecting appropriate section.
4 Design the members for various load combinations.
5 Design the bolted and welded connection.
6 Read and Prepare the detailed fabrication drawing and design report.
Page 135
The Project shall be given to a group of students consisting of not more than10 students.
List of the Projects
Schedule Detailed Content Lab
Session /
Hr.
Project 1 Design and drawing of steel roof truss for industrial shed should consist of
the following items.
1st Week Introduction, problem statement, Calculation of panel point DL,
LL, and WL on truss. 02
2nd Week Analysis of truss by graphical method/ any software and
calculation of design loads in members 02
3rd Week Design of purlins, Principal rafter, Main Tie, Design of remaining
members of truss. etc. 02
4th Week Design of bolted /welded connections and design of sliding and
hinged supports including anchor bolts 02
5th Week To generate/draw fabrication drawings on full imperial size
drawing sheet and design report on A4 size pages. 02
6th Week To generate fabrication drawings and design report including
estimation of steel required. 02
Project 2 Design and drawing of floor beam system for steel building G+1 should
consist of the following items
7th Week Introduction, problem statement and to draw grid floor plan. 02
8th Week Calculation of DL, LL on slab, beams etc. and to analyze frame for
BM and SF. 02
9th Week Calculation of design loads on columns and footing. 02
10th Week Design of beams, columns and footings. 02
11th Week Design of beam end and beam -column connections. 02
12th Week To generate/draw fabrication drawings on Full imperial size
drawing sheet and design report on A4 size pages. 02
13th Week To generate fabrication dra wings and design report including
estimation of steel required. 02
Assessment:
• Term Work
Shall consist of design report and fabrication drawings for the above projects and Site visit report
related to this course. Distribution of marks for Term Work shall be as follows:
Project 1+Project 2+ Site visit report : 20 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
Page 136
• End Semester Oral Examination
Oral Examination will be based on Sketching Examination, Term Work and Entire syllabus
Recommended Books:
1 Design of Steel Structure by N. Subramanian, Oxford University Press, New Delhi.
2 Limit state design of steel structures by S. K. Duggal, McGraw Hill Education (India) Pvt.
Limited, New Delhi.
3 Design of steel structure by Limit State Method as per IS: 800 - 2007 by Bhavikatti S. S.,
I.K. International Publishing House, New Delhi.
4 Design of Steel Structures by K. S. Sai Ram, Pearson Education, New Delhi.
5 Limit state design of steel structures as per IS 800/2007. by S. Kanthimathinathan. I.K.
International Publishing House, New Delhi.
6 Relevant Indian Specifications, Bureau of Indian Standards, New Delhi.
Reference Books:
1 Design of Steel Structure by Allen Williams
2 Practical Design of Steel Structure by Karuna Moy Ghosh, Whittles Publishing
3 Structural design and drawing by D. Krishnamurthy, CBS Publishers, New Delhi.
4 Teaching Resources Material for steel structures by INSDAG Kolkata.
Page 137
Semester -VI
Course Code Course Name Credits
CEL602 Water Resources Engineering (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective s:
1 To study different irrigation engineering methods and water requirement of crops.
2 To study hydrological cycle, its elements and plotting of hydrographs.
3 To study and calculate discharge from aquifers.
4 To study control level fixation for reservoir, Dams i.e gravity dam, its various
components and analysis and suitable conditions of earthen dam and its seepage
analysis.
5 To study importance of silt theories and its design considerations.
6 To study Canal headwork, its distribution system and design of canal structures.
Course Outcomes:
At the end of the course, learner will be able to:
1 Classify various techniques of water distribution and compute water requirement of
crops.
2 Discuss in detail about hydrological process and interpret plotting of hydrographs.
3 Apply their knowledge on well hydraulics and compute discharge from an aquifer.
4 Classify and describe various hydraulic structures such as dams and carry out its
analysis for structural stability.
5 Compare different silt theories related to irrigation channel and design the same.
6 Identify and classify different canal head works - its distribution system and canal
structures.
Page 138
List of Experiments (Minimum Five)
Module Detailed Content Lab Session /
Hr.
Assignment
1 Assignment no 1: Irrigation projects in India and Numerical based
Water requirement of crops. 02
2 Assignment no 2: Numerical based on missing data, hydrographs. 02
3 Assignment no 3: Numerical based on yield of aquifer. 02
4 Assignment no 4: Numerical based on stability of gravity dam,
seepage line (earthen dam) 02
5 Assignment no 5: Numerical based on Silt Theories 02
6 Assignment no 6: Case study on different canals in India and
abroad. 02
Model Preparation (if possible, prepare any one model from below suggested topic)
1 Prepare a model for any one water distribution technique referring
to introductory chapter. 06
2 Prepare model for Dam (Gravity or Earthen Dam).
Assessment:
• Term Work
Comprises of Assignments which has to be submitted by each student individually and
preparation of model can be worked out in group of 6 members each.
Distribution of marks for Term Work shall be as follows:
Assignments : 20 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
• End Semester Oral Examination
Pair of Internal and External Examiner should conduct oral examination.
Reference Books:
1 Irrigation and Water Power Engineering: B.C. Punmia, PandeB.B.Lal, A.K Jain. Laxmi
Publications Pvt, Ltd. New Delhi.
2 Irrigation Engineering and Hydraulic Structures: S.K. Ukarande, Ane Books Pvt. Ltd.
ISBN -9789383656899.
3 Irrigation Water Resources and Water Power Engineering: P.N. Modi, Standard Book
House, Delhi, ISBN 978-81-87401 -29-0.
4 Irrigation Engineering and Hydraulics Structures: S. K. Garg, Khanna Publishers. Delhi.
5 Design of Irrigation Structures: S. K. Sharma, S. Chand and Co.
6 Theory and Design of Irrigation Structures: R. S. Varshney and R, C. Gupta, Nem Chand
7 Engineering for Dams, Vol. I to III: Crager, Justin and Hinds, John Wiley
9 Design of Small Dams: USBR.
10 Hydro Power Structures: R. S. Varshney, Nem Chand and Bros s.
11 Concrete Dams: R. S. Varshney, Oxford and IBH Publishing Co.
Page 139
Semester -VI
Course Code Course Name Credits
CEL603 Geotechnical Engineering -II Lab 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration of
End Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
- - - - - 25 - 25 50
Course Objective:
1 To study consolidation characteristics of soil.
2 To study and examine shear strength parameters of soil.
3 To Study and determine the strength of sub -grade soil.
4 To Study and determine swelling pressure of soil.
5 To gain the knowledge of stress distribution in soil.
6 To gain the knowledge of various geotechnical software.
Course Outcomes:
At the end of the course Students will be able to
1 Determine consolidation parameters such as coefficient of compressibility, coefficient of
volume change, coefficient of consolidation.
2 Determine cohesion and angle of shearing resistance for various soil types.
3 Determine the CBR value of soil for pavement design.
4 Determine swelling pressure of soil.
5 Understand the concept of stress distribution in soils due to vertically applied load.
6 Solve design problems using geotechnical software.
List of Experiments (Minimum Five)
Module Detailed Content Lab Session
Hrs.
1 Determination of pre -consolidation pressure and coefficient of
consolidation from one dimensional consolidation test 02
Page 140
2 Determination of shear strength parameters using direct shear test 02
3 Determination of shear strength parameters using unconsolidated
undrained tri -axial compression test 02
4 Determination of undrained cohesion using unconfined compression
test 02
5 Determination of shear strength of soft clays by vane shear test 02
6 Determination of CBR value using CBR test 02
7 Determination of swelling pressure of clays 02
Assignment:
a) Term Work Assessment
Assignments should contain at least 15 numerical problems covering the entire syllabus.
b) One assignment shall be given on either vertical stress distribution in soils or a design
problem using geotechnical engineering software. The teacher is expected to impart
the knowledge to the students about the concept of stress distribution of soils or design
problem using software. The questions related to stress distribution in soils or design
problem using software shall NOT be asked in the theory examination. However, it
shall be treated as a part of term work submission. It shall preferably cover the following
points:
• Vertical stress distribution in soils: Estimation of vertical stress in soil due to surface
load using Boussinesq equation.
OR
• Design problem using software: Introduction to any geotechnical so ftware like Geo 5,
PLAXIS, FLAC, MIDAS GTS -NX etc.
Distribution of Term Work Marks
Including Laboratory Work and Assignments both, Distribution of marks for Term Work shall
be as follows:
Laboratory Work : 15 Marks
Assignments : 05 Marks
Attendance : 05 Marks
• End Semester Oral Examination : 25 marks
Page 141
Reference Books:
1 Engineering Soil Testing: Shamsher Prakash, P.K. Jain; Nem Chand & Bros
2 Soil Testing for Engineers: William T. Lambe ; John Wiley and Sons, Inc.
3 Soil Mechanics Laboratory Manual: Brij Mohan DAS; Oxford University Press Inc.
4 Soil Mechanics in Engineering Practice: Karl Terzaghi , Ralph B. Peck , Gholamreza
Mesri; John Wiley and Sons, Inc.
5 Soil Mechanics and Foundations: Dr. B. C. Punmia, A shok Kumar Jain, Arun Kumar;
Laxmi Publications
6 Soil Mechanics in Theory and Practice: Alam Singh; Asia Publishing House
7 Soil Mechanics and Foundation Engineering: V. N.S. Murthy; Saitech Publications
8 Relevant Indian Standard Specifications Cod e: BIS Publications; New Delhi
Page 142
Semester -VI
Course Code Course Name Credits
CEL604 Environmental Engineering (Lab) 01
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 02 - - 01 - 01
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-
II Average
- - - - - 25 - 25 50
Course Objective s:
1 To analyse engineering skill related to water and wastewater sample.
2 To apply decision related to treatment of water and wastewater based on standards.
3 To understand the fundamental characteristics of municipal solid waste.
4 To acquire knowledge on the severity of air pollution and suggest remedies and
preventive measures.
5 To understand the basic concepts of noise and its measurement.
Course Outcomes:
At the end of the course, learner will be able to:
1 Impart the knowledge on quality or characteristic of water and wastewater sample.
2 Interpret the required treatment for water and wastewater based on standards and norms.
3 Impart the knowledge on quality of solid waste.
4 Measure the concentration of particulate matters, dust and dispersed pollutants in air.
5 Inspect the levels of noise and interpret the results.
Page 143
List of Experiments (Any eight to be performed)
Module Detailed Content Lab Session /
Hr.
1 Determination of pH of water / sewage sample /solid waste. 02
2 Determination of Turbidity in water sample. 02
3 Determination of Total Solids, suspended solids, dissolved solids,
volatile solids. 02
4 Determination of chlorides . 02
5 Determination of Optimum dose of coagulant by using Jar Test . 02
6 Determination of Dissolved Oxygen . 02
7 Determination of Residual chlorine 02
8 Determination of air quality using High Volume air Sampler. 02
9 Determination of Level equivalent of Noise 02
10 Determination of Bio Chemical Oxygen Demand of sewage
sample 02
11 Determination of Chemical Oxygen Demand of sewage sample. 02
12 Determination of moisture content of solid waste. 02
Assessment:
• Term Work
Including Laboratory Work and Assignments both, Distribution of marks for Term Work shall
be as follows:
Laboratory Work : 15 Marks
Assignments : 05 Marks
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
• End Semester Oral Examination
Oral exam will be based on experiments performed, site visit and theory syllabus.
Reference Books:
1 Water Supply Engineering: S. K. Garg, Khanna Publication.
2 Environmental Engineering Vol II: Garg, S. K., Khanna Publishers New Delhi.
3 Water Supply Engineering: P.N. Modi, Rajsons Publication.
4 Environmental Engineering: B. C. Punmia , Laxmi Publications, New Delhi.
5 Solid waste management in developing countries: A.D. Bhide and B.B. Sundaresan.
6 CPHEEO Manual on Water Supply and Treatment.
7 CPHEEO Manual on Sewage and Treatment.
Page 144
Semester -VI
Course Code Course Name Credits
CEL605 Skill Based Lab Course -III 1.5
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 03 - - 1.5 - 1.5
Theory Term
Work/Practical/Oral
Total Internal Assessment End Sem
Exam Duration
of End
Sem Exam Term
Work Pract. Oral
Test-I Test-II Average
- - - - - 25 - 25 50
Course Objective s:
1 To Provide hands on training on analysis, modelling and design of R . C. C. Framed
structure and Steel structure.
2 To prepare the database and perform its statistical analysis using relevant software.
3 To understand and apply the basic functions of excel for data analysis, preparation of
programs and generation of reports having mathematical and pictorial representation.
4 To design reliable and sustainable transportation systems.
5 To evaluate the demand of water for given population and create the proper distribution
system.
6 To Apply the basic knowledge of various computer languages to create the programme
pertaining to civil engineering domain.
Course Outcomes:
At the end of the course, learner will be able to:
1 To understand the functions involved various softwares related to civil engineering field.
2 To perform different functions of the software related to analysing modelling and
designing the structure, creation of database and its analysis.
3 To describe and represent the data obtained from site, experimental work in various
formats as per industrial requirements
4 To import road geometric design into the software as well as relate with the design
standards applied into the software.
5 To de sign the effective distribution network system for the distribution of water
resources.
6 To apply the knowledge to create the programme in excel and various computer
languages for solving problems pertaining to civil engineering field.
Page 145
List of Experiments (Minimum Eight)
Module Detailed Content Lab Session
/ Hr.
Analysis, Modelling and Design of structure using professional software 15
1 Introduction to structural engineering software. Study of basic
commands and tools. 03
2 Analysis of determinate and in -determinate structure. Extraction of
shear force and bending moment diagram for given structure
manually as well using software 03
3 Developing a model of simple plan of a building (square or
rectangular) 03
4 Analysis of frames – R. C. C. framed structure 03
5 Analysis of frames – Steel structure 03
Preparation and analysis of database using open -source software 03
6 Introduction to statistical software – Basic function required for
preparing database, statistical analysis of the data and its
representation 03
Excel 15
7 Introduction to Excel – Basic function required for preparing
database, statistical analysis of the data and its graphical
representation
a. Creation of database of result obtained from Traffic volume
survey and its analysis
b. Creating database of results obtained from laboratory
experiments and its analysis 03
8 Preparation of programme using various functions in excel or any
other relevant exercise in civil engineering field
1. Mix design of concrete
2. Design of pavement
3. Design of structural members 03
9 Preparation of checklist for various items of work in building
construction for quality control, Preparation of various reports like
Daily progress report, Daily Labour report, Weekly progress report,
Weekly Labour report, Geotechnical reports, Audit reports 03
10 Use of transportation engineering related software for creation of
contour, creation of cross section, setting horizontal and vertical
alignment and calculation of cut and fill 03
11 Use of open -source software for designing and simulation of water
distribution network 03
Programming using open -source software C or C++ or java or python 06
12 Introduction to programming software, Basics commands and tools
for development of programme related to civil engineering field 03
13 Programming for Civil Engineers with content related to any domains
of Civil Engineering problem solving using programming software. 03
Page 146
Assessment:
• Term Work
Including Laboratory Work comprising of minimum 5 software generated reports/sheets/program
outputs along with minimum 5 assignments or reports, distribution of marks for Term Work shall
be as follows:
Laboratory Work : 10 Marks (comprising of min. 5 software generated
sheets/program outputs)
Assignments : 10 Marks (comprising of min. 5 Reports)
Attendance : 05 Marks
Further, while giving weightage of marks on the attendance, following guidelines shall be
resorted to: 75% - 80%: 03 Marks; 81% - 90%: 04 Marks; 91% onwards: 05 Marks.
End Semester Oral Examination
Oral exam will be based on Laboratory Work performed .
Reference Books:
1 Software manuals
2 IS 456, IS 800
3 Refereed Journal papers on Software applications
4 Manual on Water Supply and Treatment, C. P. H. E. E. O., Ministry of Urban
Development, Government of India, New Delhi
5 The ‘C’ Programming Language, B.W Kernighan & D.M Ritchie, Prentice Hall of India
6 Statistics for Managers, Using Microsoft Excel, 8th Edition, David M., Levine, Pearson
India Education service Pvt ltd.
Recommended Books:
1 Excel with Microsoft Excel: Comprehensive & Easy Guide to Learn Advanced MS Excel
Paperback – 1 January 2019 by Naveen Mishra (Author); Publisher:Penman Books;
Publication date: 1 January 2019; ISBN -10: 9389024153; ISBN -13: 978 -9389024159
2 Structural Mod eling, Analysis & Design Using Staad Pro Software Paperback – 15
October 2015 by Vignesh Kumar M (Author); Publisher: LAP Lambert Academic
Publishing; Genre: Business & Economics; ISBN: 9783848447671, 9783848447671
3 Discovering Statistics Using SPSS for Windows: Advanced Techniques for the Beginner;
By Andy P. Field; Publisher:Sage Publications; ISBN:9780761957553, 0761957553
4 Quality Management in Construction Projects; By Abdul Razzak Rumane; Copyright
Year 2018; ISBN 9780367890032; Published December 10, 2019 by CRC Press
5 Introduction to Machine Learning with Python: A Guide for Data Scientists Paperback –
7 October 2016; by Andreas C. Mueller (Author), Sarah Guido (Author); ISBN -10:
1449369413; ISBN -13: 978 -1449369415, 1st Edit ion; Publisher O ′Reilly
Page 147
Semester -VI
Course Code Course Name Credits
CEM 601 Mini Project -2B 1.5
Contact Hours Credits Assigned
Theory Practical Tutorial Theory Practical Tutorial Total
- 03 - - 1.5 - 1.5
Theory Term
Work/Practical/Oral
Total Internal Assessment
End Sem
Exam Duration
of End
Sem
Exam Term
Work Pract. Oral
Test-I Test-II Average
- - - - - 25 - 25 50
Rationale
Civil engineers deal with many challenges on daily basis . The civil engineering industry's growth
has been need based and society centric. Computers and IT systems have touched almost every
part of our lives and inter -disciplinary approach is way of life ahead. Mumbai University
proposed Mini projects in the sylla bus so that the budding civil engineers can connect with the
world outside their textbooks and have the idea of future course . The Mini project should actually
provide solution to a typical problem after a brainstorming and in a stipulated period. The
solutions based on software, development of computer application, or IT systems based on
artificial intelligence or IOT are expected from civil engineering students. The competitions
ahead will give students the experience of the civil engineering industry's real-world problems
and make students brainstorm ideas, learn, and explore the civil engineering industry.
Course Objective s:
1 To recognize societal problems and convert them into a problem statement by
understanding of facts and ideas in a group activity. (BTL -2)
2 To deal with new problems and situations by applying acquired knowledge, facts,
techniques and rules in a different way. (BTL -3)
3 To examine and break information into parts, by analyzing motives or causes. (BTL -4)
4 To learn evaluating information, validity of ideas and work based on a set of criteria.
(BTL -5)
5 To create solutions by compiling information together in a novel way. (BTL -6)
Page 148
6 To design software based model, application or IT system by combining elements in a new
pattern or proposing new solutions. (BTL -6)
Course Outcomes:
At the end of the course, learner will be able to:
1 Identify problems based on societal /research needs and formulate a solution strategy.
2 Apply fundamentals to develop solutions to solve societal problems in a group.
3 Analyze the specific need, formulate the problem and deduce the interdisciplinary
approaches, software -based solutions and computer applications.
4 Develop systematic flow chart, evaluate inter disciplinary practices, devices, available
software, estimate and recommend possible solutions.
5 Draw the proper inferences from available results through
theoretical/experimental/simulations and assemble physical systems.
6 Create devises or design a computer program or develop computer application.
• Guidelines for Mini Project -2B
Expected outcome is Software based, “ A Computerized Model/ A software/ A
computer program, an IOT application or A Computer or Mobile based
application ”.
Students shall form a group of 3 to 4 students, while forming a group shall not be allowed
less than three or more than four students, as it is a group activity.
Students should find ‘List of Mini project - 2B problems’ in University web portal
www.mu.ac.in, and in consultation with faculty supervisor/head of department/internal
committee of faculties select the title.
Students shall submit implementation plan in the form of Gant/PERT/CPM chart, which
will cover weekly activity of mini project.
A log book to be prepared by each group, wherein group can record weekly work progress,
guide/supervisor can verify and record notes/comments.
Faculty supervisor may give inputs to students during mini project activity; however, focus
shall be on self-learning.
Students in a group shall understand problem effectively, propose multiple solution and
select best possible solution in consultation with guide/ supervisor.
Students shall convert the best solution into A Computerized Model/ a software/ A
computer program, an IOT application or A Computer or Mobile based application using
various components of their domain areas and demonstrate.
The solution to be validated with proper justification and report to be compiled in standard
format of University of Mumbai.
With the focus on the self-learning, innovation, addressing societal problems and
entrepreneurship quality development within the students through the Mini Projects, it
is preferable that Students come out with original solution.
However, based on the individual students or group capability, with the mentor’s
recommendations, if the proposed Mini Project adhering to the qualitative aspects
mentioned above gets completed in odd semester, then that group can be allowed to work
on the extension of the Mini Project with suitable improvements/modifications or a
Page 149
completely new project idea in even semester. This policy can be adopted on case-by-case
basis.
List of approved problems for Mini Project -2B:
S501: Development for Mobile App for Smart Traffic Management System Using Internet of
Things
S502: Development for Mobile App for IoT based smart traffic signal monitoring system using
vehicle Count.
S503: Development of (AI Based) software or mobile App. To identify quantity of (bricks,
pipes, bars etc.) from photograph.
S504: Development of (AI Based) software or mobile App. To identify size of cracks in
distressed structure from coin aimed photograph.
S505: Development of (AI Based) software or mobile App. To identify size of cracks in
distressed structure .
S506: Development of (AI Based) software or mobile App. For Assessment of Irrigation
Water Quality Index.
S507: Development of (AI Based) software or mobile App. For Ground Water Quality
monitoring in industrial zone.
S508: Development of (AI Based) software or mobile App Advanced Earthquake Resistant
Techniques
S509: Development of Remote Monitoring System For Civil Engineering projects.
S510: Application of Geographic Information system using Quantum GIS software.
S511: Development of (AI Based) software or mobile App for Building Information Modelling
using ArchiCAD / Revit architecture software.
S512: Development of (AI Based) software or mobile App Digitization of Slump cone Test.
S513: Development of (AI Based) software or mobile App Digitization of other mechanical
Tests.
S514: Development of (AI Based) software or mobile App Civil Engineering quantity
calculator.
S515: Development of (AI Based) software or mobile App Digitization of Non -destructive
testing of concrete -various methods.
S516: Development of (AI Based) software or mobile App Mapping of area using Total Station
and plotting the same on 3 -d drafting.
S517: Preparation of Excel VBA sheet for solving Survey, Soil Mechanics, Structural Analysis
problems.
S518: Development of (AI Based) software or mobile App Smart street lights and faul t location
monitoring in the cloud over IoT
S519: Development of (AI Based) software or mobile App IOT based smart irrigation system
S520: Development of (AI Based) software or mobile App Smart cities: Traffic data
monitoring over IoT for easy transportation/alternative route selection
S521: Development of (AI Based) software or mobile App Dam gate level monitoring for water
resource analysis and dam gate control over IoT.
S522: Development of (AI Based) software or mobile App Smart colony: RFID based gate
security system, street lights, and water pump automation.
S523: Development of (AI Bas ed) software or mobile App Agriculture automation using GSM
(soil moisture level control and motor control)
Page 150
(This is tentative list, this list will be continuously updated by contributions
from faculty, industry and alumni.)
Guidelines for Assessment of Mini Project:
• Term Work
The review/ progress monitoring committee shall be constituted by head of departments of each
institute. The progress of mini project to be evaluated on continuous basis, minimum two reviews
in each semester.
In cont inuous assessment focus shall also be on each individual student, assessment based on
individual’s contribution in group activity, their understanding and response to questions.
Distribution of Term work marks for both semesters shall be as below:
Marks awarded by guide/supervisor based on log book : 10 Marks
Marks awarded by review committee : 10 Marks
Quality of Project report : 5 Marks
Review/progress monitoring committee may consider following points for assessment based on
either one year or half year project as mentioned in general guidelines.
• Assessment criteria of Mini Project:
Mini Project shall be assessed based on following criteria:
Quality of survey/ need identification
Clarity of Problem definition based on need.
Innovativeness in solutions
Feasibility of proposed problem solutions and selection of best solution
Cost effectiveness
Societal impact
Innovativeness
Cost effectiveness and Societal impact
Full functioning of working model as per stated requirements
Effective use of skill sets
Effective use of standard engineering norms
Contribution of an individuals as member or leader
Clarity in written and oral communication
In one year, project, first semester evaluation may be based on first six criteria’s and
remaining may be used for second semester evaluation of performance of students in mini
project.
In case of half year project all criteria in generic may be considered for evaluation of
performance of students in mini project.
Page 151
• Guidelines for Assessment of Mini Project Practical/Oral Examination:
Report should be prepared as per the guidelines issued by the University of Mumbai.
Mini Project shall be assessed through a presentation and demonstration of working model
by the stude nt project group to a panel of Internal and External Examiners preferably from
industry or research organizations having experience of more than five years and approved
by head of Institution.
Students shall be motivated to publish a paper based on the work in Conferences/students
competitions.
• Mini Project shall be assessed based on following points:
Quality of problem and Clarity
Innovativeness in solutions
Cost effectiveness and Societal impact
Full functioning of working model as per stated requirements
Effective use of skill sets
Effective use of standard engineering norms
Contribution of an individuals as member or leader
Clarity in written and oral communication