## SE BE Electrical Engineering Rev 2016 1 Syllabus Mumbai University by munotes

## Page 2

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 1

AC 11/05/2017

Item No. 4.183

UNIVERSITY OF MUMBAI

Revised syllabus (Rev - 2016) from Academic Year 2016 -17

Under

FACULTY OF TECHNOLOGY

Electrical Engineering

Second Year with Effect from AY 2017 -18

Third Year with Effect from AY 2018 -19

Final Year with Effect from AY 2019 -20

As per Choice Based Credit and Grading System

with effect from the AY 2016 –17

## Page 3

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 2

From Co -coordinator’s Desk:

To meet the challenge of ensuring excellence in engineering education, the issue of quality

needs to be addressed, debated, and taken forward in a systematic manner. Accreditation is the

principal means of quality assurance in higher education. The major emphasis of a ccreditation

process is to measure the outcomes of the program that is being accredited. In line with this Faculty

of Technology of University of Mumbai, has taken a lead in incorporating philosophy of outcome

based education in the process of curriculum d evelopment.

Faculty of Technology, University of Mumbai, in one of its meeting unanimously resolved that, each

Board of Studies shall prepare some Program Educational Objectives (PEO‟s) and give freedom to

affiliated Institutes to add few (PEO‟s), course o bjectives and course outcomes to be clearly defined

for each course, so that all faculty members in affiliated institutes understand the depth and approach

of course to be taught, which will enhance learner‟s learning process. It was also resolved that,

maximum senior faculty from colleges and experts from industry to be involved while revising the

curriculum. I am happy to state that, each Board of Studies has adhered to the resolutions passed by

Faculty of Technology, and developed curriculum accordingly. In addition to outcome based

education, Choice Based Credit and Grading System is also introduced to ensure quality of

engineering education.

Choice Based Credit and Grading System enable a much -required shift in focus from teacher -

centric to learner -centric education. Since the workload estimated is based on the investment of time

in learning, not in teaching. It also focuses on continuous evaluation which will enhance the quality

of education. University of Mumbai has taken a lead in implementing the system through its

affiliated Institutes. Faculty of Technology has devised a transparent credit assignment policy

adopted ten points scale to grade learner‟s performance. Choice Based Credit and Grading System

were implemented for First Year of Engineering (Undergraduate) from the academic year 2016 -

2017. Subsequently this system will be carried forward for Second Year of Engineering

(Undergraduate) in the academic year 2017 -2018 and s o on.

Dr. Suresh K. Ukarande

Coordinator,

Faculty of Technology,

Member - Academic Council

University of Mumbai, Mumbai

## Page 4

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 3

Preamble:

The overall technical education in our country is changing rapidly in manifolds. Now it is

very much challenging to maintain the quality of education with its rate of expansion. To meet

present requirement a systematic approach is necessary to build the strong technical base with the

quality. Accreditation will provide the quality assurance in higher education and to achieve

recognition of the institution or program meeting certain specified standards. The main -focus of an

accreditation process is to measure the program outcomes, essentially a range of skills and

knowledge that a student will have at the time of gradu ation from the program that is being

accredited. Faculty of Technology of University of Mumbai has taken a lead in incorporating

philosophy of outcome based education in the process of curriculum development.

I, as a Chairman, Board of Studies in Electrica l Engineering of University of Mumbai, happy to state

here that, Program Educational Objectives (PEOs) were finalized for undergraduate program in

Electrical Engineering, more than ten senior faculty members from the different institutes affiliated

to Univ ersity of Mumbai were actively participated in this process. Few PEOs and POs of

undergraduate program in Electrical Engineering are listed below;

Program Educational Objectives (PEOs)

Graduates will have successful career in industry or pursue higher stud ies to meet future

challenges of technological development.

Graduates will develop analytical and logical skills that enable them to analyze and design

Electrical Systems and their Controls .

Graduates will achieve professional skills to expose themselves b y giving an opportunity as

an individual as well as team .

Graduates will undertake research activities in emerging multidisciplinary fields.

Program Outcomes (POs)

Engineering knowledge : Apply the knowledge of mathematics, science, engineering

fundamentals, and an engineering specialization to the solution of complex engineering

problems.

Problem analysis : Identify, formulate, review research literature, and analyze complex

engineering problems reaching substantiated conclusions using first pr inciples of

mathematics, natural sciences, and engineering sciences.

Design/development of solutions : Design solutions for complex engineering problems and

design system components or processes that meet the specified needs with appropriate

consideration for the public health and safety, and the cultural, societal, and environmental

considerations.

## Page 5

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 4

Conduct investigations of complex problems : Use research -based knowledge and research

methods including design of experiments, analysis and interpretation of data, and synthesis of

the information to provide valid conclusions.

Modern tool usage : Create, select, and apply appropriate techniques, resources, and modern

engineering and IT too ls including prediction and modeling to complex engineering activities

with an understanding of the limitations.

The engineer and society : Apply reasoning informed by the contextual knowledge to assess

societal, health, safety, legal and cultural issues and the consequent responsibilities relevant

to the professional engineering practice.

Environment and sustainability : Understand the impact of the professional engineering

solutions in societal and environmental contexts, and demonstrate the knowledge o f, and need

for sustainable development.

Ethics : Apply ethical principles and commit to professional ethics and responsibilities and

norms of the engineering practice.

Individual and team work : Function effectively as an individual, and as a member or leader

in diverse teams, and in multidisciplinary settings.

Communication : Communicate effectively on complex engineering activities with the

engineering community and with society at large, such as, being able to comprehend and

write effective reports a nd design documentation, make effective presentations, and give and

receive clear instructions.

Project management and finance : Demonstrate knowledge and understanding of the

engineering and management principles and apply these to one‟s own work, as a m ember and

leader in a team, to manage projects and in multidisciplinary environments.

Life-long learning : Recognize the need for, and have the preparation and ability to engage in

independent and life -long learning in the broadest context of technological change.

Dr. S. R. Deore,

Chairman,

Board of Studies in Electrical Engineering,

Member - Academic Council

University of Mumbai

## Page 6

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 5

Program Structure for

SE Electrical Engineering

University of Mumbai

(With Effect from 2017 -18)

Scheme for Semester III

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Tutorial Theory Practical Tutorial Total

EEC301 Applied Mathematics - III 4 - 1 4 - 1 5

EEC302 Electronic Devices and Circuits 4 - - 4 - - 4

EEC303 Conventional and Non -Conventional

Power Generation 3 - 1 3 - 1 4

EEC304 Electrical and Electronics

Measurement 4 - - 4 - - 4

EEC305 Electrical Machine – I 4 - - 4 - - 4

EEL301 Electr ical and Electronic s

Measurement Lab - 2 - - 1 - 1

EEL302 Object Oriented Programming and

Methodology Lab - 4# - - 2 - 2

EEL303 Electronics Lab - I - 2 - - 1 - 1

EEL304 Electrical Machine Lab - I - 2 - - 1 - 1

Total 19 10 2 19 5 2 26

# Out of four hours, 2 hours theory shall be taught to entire class and 2 hours practical in batches

## Page 7

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 6

Examination Scheme for Semester III

Course

Code Course Name Examination Scheme

Total

Marks Theory

Term Work Practical

Oral

Pract. /Oral External

(UA) Internal

(CA)

Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks

EEC301 Applied Mathematics - III 80 32 20 8 25 10 - - - - - - 125

EEC302 Electronic Devices and Circuits 80 32 20 8 - - - - - - - - 100

EEC303 Conventional and Non -

Conventional Power Generation 80 32 20 8 25 10 - - - - - - 125

EEC304 Electrical and Electronics

Measurement 80 32 20 8 - - - - - - - - 100

EEC305 Electrical Machine –I 80 32 20 8 - - - - - - - - 100

EEL301 Electrical and Electronics

Measurement Lab - - - - 25 10 - - 25 10 - - 50

EEL302 Object Oriented Programming

and Methodology Lab - - - - 25 10 - - - - 50 20 75

EEL303 Electronics Lab - I - - - - 25 10 - - - - 25 10 50

EEL304 Electrical Machine Lab - I - - - - 25 10 - - - - 25 10 50

Total 400 - 100 - 150 - - - 25 - 100 - 775

## Page 8

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 7

Program Structure for

SE Electrical Engineering

University of Mumbai

(With Effect from 2017 -18)

Scheme for Semester IV

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Tutorial Theory Practical Tutorial Total

EEC401 Applied Mathematics - IV 4 - 1 4 - 1 5

EEC4 02 Power System - I 3 - 1 3 - 1 4

EEC 403 Electrical Machines – II 4 - - 4 - - 4

EEC4 04 Electromagnetic Field and wave

Theory 3 - 1 3 - 1 4

EEC4 05 Analog and Digital Integrated Circuits 3 - - 3 - - 3

EEC406 Electrical Network 3 - 1 3 - 1 4

EEL4 01 Simulation Lab - I - 2 - - 1 - 1

EEL4 02 Electrical Machines Lab - II - 2 - - 1 - 1

EEL4 03 Electronics Lab - II - 2 - - 1 - 1

EEL4 04 Electrical Workshop - 2 - - 1 - 1

Total 20 8 4 20 4 4 28

## Page 9

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 8

Examination Scheme for Semester IV

Course

Code Course Name Examination Scheme

Total

Marks Theory

Term Work Practical

Oral

Pract./Oral External

(UA) Internal

(CA)

Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks

EEC401 Applied Mathematics - IV 80 32 20 8 25 10 - - - - - - 125

EEC402 Power System - I 80 32 20 8 25 10 - - - - - - 125

EEC403 Electrical Machines - II 80 32 20 8 - - - - - - - - 100

EEC404 Electromagnetic Field and wave

Theory 80 32 20 8 25 10 - - - - - - 125

EEC405 Analog and Digital Integrated

Circuits 80 32 20 8 - - - - - - - - 100

EEC406 Electrical Network 80 32 20 8 25 10 - - - - - - 125

EEL401 Simulation Lab - I - - - - 25 10 - - 25 10 - - 50

EEL402 Electrical Machines Lab - II - - - - 25 10 - - - - 25 10 50

EEL403 Electronics Lab - II - - - - 25 10 - - - - 25 10 50

EEL404 Electrical Workshop - - - - 25 10 - - 25 10 - - 50

Total 480 - 120 - 200 - - - 50 - 50 - 900

## Page 10

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 9

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC301 Applied Mathematics -III

(abbreviated as AM -III) 4 1 4 1 5

Course

code Course Name Examination Scheme

Theory

Term

Work Total Internal Assessment End

Sem.

Exam Exam

Duration

(Hrs.) Test 1 Test 2 Avg.

EEC301 Applied

Mathematics -III 20 20 20 80 3 25 125

Course

Objectives To Develop knowledge and skill based foundation in Mathematics

amongst students needed for the field of Electrical Engineering

To provide students with mathematics fundamentals nec essary to

formulate, solve and analyses complex engineering problems.

To prepare student to apply reasoning informed by the contextual

knowledge to Electrical E ngineering practice.

To prepare students to work as part of teams on multi -disciplinary

projects.

Course

Outcomes Students will be able

To demonstrate basic knowledge of Laplace Transform, Fourier series,

Bessel Functions, Vector Algebra and Complex Variable.

To identify and Model the problems of t he field of Electrical

Engineering and solve it.

Module Contents Hours

1 Laplace Transform

Laplace Transform (LT) of Standard Functions: Definition of

Laplace transform, Condition of Existence of Laplace transform,

Laplace transform of

Heaviside unit step function, Dirac -delta function, Laplace transform

of Periodic function

Properties of La place Transform: Linearity, first shifting theorem,

second shifting theorem, multiplication by ,Division by t, Laplace

Transform of derivatives and integrals, change of scale, convolution

theorem, Evaluation of integrals using Laplace transform. 07

2 Inverse Laplace Transform & its Applications:

Partial fraction method, Method of convolution, Laplace inverse by

derivative.

Applications of Laplace Transform: Solution of ordinary

differential equations, Solving RLC circuit differential equation of 06

## Page 11

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 10

first order and second order with boundary condition using Laplace

transform (framing of differential equation is not included).

3 Fourier Series:

Introduction: Orthogonal and orthonormal set of functions,

Introduction of Dirichlet‟s conditions, Euler‟s form ulae.

Fourier Series of Functions: Exponential, trigonometric functions of

any period =2L, even and odd functions, half range sine and cosine

series

Complex form of Fourier series, Fourier integral representation,

Fourier Transform and Inverse Fourier tran sform of constant and

exponential function. 11

4 Vector Algebra & Vector Differentiation:

Review of Scalar and Vector Product : Scalar and vector product of

three and four vectors, Vector differentiation, Gradient of scalar point

function, Divergence and Curl of vector point function.

Properties: Solenoidal and irrotational vector fields, conservative

vector field. 07

5 Vector Integral

Line integral, Green‟s theorem in a plane, Gauss‟ divergence theorem

and Stokes‟ theorem 06

6 Complex Variable & Bessel Functions:

Analytic Function: Necessary and sufficient conditions (No Proof),

Cauchy Reiman equation Cartesian form (No Proof) Cauchy Reiman

Equation in polar form (with Proof), Milne Thomson Method and it

application, Harmonic function, orthogonal traject ories.

Mapping: Conformal mapping, Bilinear transformations, cross ratio,

fixed points

Bessel Functions: Bessel‟s differential equation, Properties of Bessel

function of order +1/2 and

-1/2, Generating function, expression of

cos(xsin ), sin (x sin ) in term of Bessel functions 11

Books Recommended:

Text books:

1. H.K. Das, “Advanced engineering mathematics”,S . chand , 2008

2. A. Datta, “Mathematical Methods in Science and Engineering”, 2012

3. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publication

Reference Books:

1. B. V. Ramana, “Higher Engineering Mathematics”, Tata Mc -Graw Hill Publication

2. Wylie and Barret, “Advanced Engineering Mathematics”, Tata Mc -Graw Hill 6th

Edition

3. Erwin Kreysizg, “Advanced Engineering Mathematics”, John Wiley & Sons, Inc

4. Murry R. Spieget, “Vector Analysis”, Schaum‟s outline series, Mc -Graw Hill

Publication

## Page 12

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 11

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project

Term work:

Term work shall consist of minimum eight tutorials and assignments (minimum 2) .

The distribution of marks for term work shall be as follows:

Tutorials :15 marks

Assignments :05 marks

Attendance (Theory and Tutorial) :05 marks

The final certification and acceptance of term work ensures minimum passing in the term work.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be

asked.

4: Remaining quest ion will be randomly selected from all the modules.

## Page 13

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 12

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC302 Electronic Devices and

Circuits

(abbreviated as EDC) 4 - 4 - 4

Course

Code Course Name Examination Scheme

EEC302 Electronic

Devices and

Circuits Theory

Term

Work Total Internal Assessment End

Sem.

Exam Exam.

Duration

(Hrs.) Test 1 Test 2 Avg.

20 20 20 80 3 - 100

Course

Objectives To teach the basic concept of various electronic devices, circuits and

their application

To develop ability among students for problem formulation, system

design and solving skills

Course

Outcomes Students will be able

To Identify the different types of diodes and their applications in

electronic circuits

To a nalyze the dc and ac parameters of BJT JFET, and differential

amplifiers

To demonstrate and analyze the effects of various parameters on

performance of BJT and JFET amplifier.

To analyze the effects o f negative feedback in BJT and JFET amplifiers.

To identify the effects of cascading in BJT and JFET amplifiers.

To analyze the different types of oscillators.

Module Contents Hours

1 Diode:

Basic construction, Operation and characteristics of diode,

Application of diode as clipper and clampers, Construction,

Principle of operation and application of special diode – 1) Zener,

2) LED, 3) Schottky, 4) Photodoide. Full Wave Bridge Rectifier

with and without Filter, Analysis: specification of the devices and

components required for C, LC, CLC filter. 08

2 Bipolar Junction Transistor:

Construction and Characteristics of various configurations of 14

## Page 14

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 13

BJT. Biasing Circuits: Types, dc circuit analysis, load line,

thermal runaway, stability factor analysis, thermal stabilization

and Compensation.

Modeling: Small signal analysis of CE configurations with

different biasing network using h -parameter model. Introduction

to re-model and hybrid -pi model.

Amplif ication derivation of expression for voltage gain, current

gain, input impedance and output impedance of CC, CE

amplifiers, Study of frequency response of BJT amplifier.

3 Field Effect Transistor:

Types, construction and their characteristics, Biasing circuits for

FET amplifiers, FET small signal analysis, derivation of

expressions for voltage gain and output impedance of CS

amplifiers.

MOSFET - Types, construction and their characteristics 08

4 Feedback Amplifier:

Introduction to positive and negative feedback, negative feedback

-current, voltage, Series and Shunt type. It‟s effect on input

impedance, output impedance, voltage gain, current gain and

bandwidth 07

5 Cascade amplifiers:

Types of coupling, effect of coupling on performance of BJT and

JFET amplifiers, Darlington -pair 03

6 Oscillators:

Positive feedback oscillators, frequency of oscillation and

condition for sustained oscillations of a) RC phase shift, b)Wien

bridge, c)Hartley/ Colpitts with derivations, crystal Oscillator,

UJT relaxation oscillator 08

Books Recommended:

Text Books:

1. Robert Boylestad and Louis Nashelsky, Electronic Devices and Circuits ,

Prentice -Hall of India.

2. Millman and Halkias, „ Electronic Devices and Circuits ‟, Tata McGraw -Hill.

3. David Bell, Electronic Devices and Circuits , Oxford University Press

Reference Books:

1. Thomas Floyd, „ Electronic Devices‟ , Prentice -Hall of India

2. Ramakant A. Gayakwad, Op-Amps and Linear Integrated Circuits

3. Neamen D.A., Electronic Circuit Analysis and Design , McGraw Hill

International.

4. S. Salivahanan, N. Suresh Kumar, “ Electronic Devices and Circuits” TMH

Assessment:

## Page 15

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 14

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test o r assignment on live problems or

course project.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questio ns of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 16

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 15

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits assigned

Theory Tutorial Theory Tutorial Total

EEC303 Conventional and Non -

Conventional

Power Generation

(abbreviated as CNCPG) 3 1 3 1 4

Course

Code Course Name Examination Scheme

Theory

Term

work Total Internal Assessment End

Sem.

Exam Exam

Duration

(Hrs.) Test 1 Test 2 Avg.

EEC303 Conventional and

Non-conventional

Power Generation 20 20 20 80 03 25 125

Course

Objectives To impart the knowledge of basics of different types of power generation &

power plants in detail so that it helps them in industry oriented learning

Course

outcomes Students will be able

To analyse the economics of power generation

To illustrate, the operation of thermal power plant

To describe, the classification of hydro power plant and significance of

hydrograph

To illustrate, the operation of nuclear power plant

To compare the operation of Diesel and Gas Turbine power plant.

To illustrate operation of various Non -Conventional Energy sources

Module Contents Hours

1

Conventional and Non - Conventional sources of energy

Present energy scenario worldwide and Indian perspective.

Economics of the power plant

Load curve, load duration curve, various factors and effects of fluctuating

load on operation and methods of meeting fluctuating load. Selection of

generating equipment, depreciation of plant, cost of electrical energy -

Fixed and operating cost of different plants, effect of load factor on unit

cost. Role of load di versity in power system economy and basic tariff

methods (*Numerical ). 05

## Page 17

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 16

2 Thermal power plant

Law of Thermodynamics. Analysis of steam cycle -Carnot, Rankine. PV

and TS diagram, Rehe at cycle and Regenerative cycle . Layout of power

plant. Selection of site, Lay out of Coal handling Plant, pulverized coal

handling, Fluidized bed combustion, Ash handling, Dust collection,

Forced draught and induced draught fans, Water t ube Boiler and Fire tube

boiler. Impulse turbine and reaction turbine. Accessories: Feed pump,

injector , economizer, air preheater , super heater, steam separator, Direct

conta ct condensers and Surface condenser, and cooling towers. 09

3 Hydro power plant

Rainfall, run off and its measurement hydrograph, flow duration curve,

mass curve, reservoir storage capacity, layout of hydroelectric power

plant, Selection of site, classification of hydro power plant, construction

and working of turbine -Pelton, Kaplan, Francis. (*Numerical) 05

4 Nuclear power plant

Introduction of nuclear engineering, fission, fusion, nuclear materials,

thermal fission reactor, layout of nuclear power plant, Selection of site,

PWR, BWR, reactor control, introduction to liquid metal, fast breeder

reactors and plasma technology. 06

5 Gas turbine and Diesel power plant

Brayton cycle operation, Layout of gas turbine power plant, types of gas

turbine power plant. Diesel cycle, Principle of Diesel power plant, layout,

significance of components of diesel power plant. Comparison with gas

turbine power plants in terms of advantages and disadvantages 04

6 Power Generation using non -conventional energy sources

Solar Energy

Solar Flat plate collectors, Solar concentrators, Dish and Parabolic trough

concentrating generating systems, Central tower solar thermal power

plants.

Basic princi ple of power generation in a PV cell, Band gap and efficiency

of PV cells solar cell characteristics.

Wind Energy

Basic component of WEC, Types of wind turbine -HAWT, VAWT,

Performance parameters of wind turbine, Power in wind, Wind electric

generators and site selection.

Fuel Cell

Introduction to fuel cell, principle of operation of fuel cell, Types of fuel

cell

Other sources

Basics of power generation: Biomass, geothermal and tidal energy sources

and OTEC. 07

Note: * Numerical should be covered in tutorials.

## Page 18

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 17

Books Recommended:

Text Books:

1. MV Deshpande , Elements of Power station design, Tata McGraw Hill

2. DH Bacon , Engineering Thermodynamics, London Butterworth

3. PK Nag , Power Plant Engineering -Steam & Nuclear, Tata McGraw Hill

Reference Books:

1. Fredrick T Morse , Power Plant Engineering, East-West Press Pvt Ltd

2. Mahesh Verma , Power Plant Engineering, Metrolitan Book Co Pvt Ltd

3. RK Rajput , A Text Book of Power System engineering, Laxmi Publication

4. George W Sutton -(Editor) , Direct Energy Conversion, Lathur University, Electronic Series

Vol 3, McGraw Hill

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project.

Term work:

Term work shall consist of minimum two group assignments followed by seminar, report on

power plant visit and four tutorials based on the syllabus. The distribution of ma rks for term

work shall be as follows:

Tutorial and Visit :10 marks

Assignments and Seminar :10 marks

Attendance (Theory and Tutorial ) :05 marks

The final certification and acceptance of term work ensures minimum passing in the term work.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 19

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 18

University of Mumbai

Course

code Course Name Teaching scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC304 Electrical and

Electronics

Measurement

(abbreviated as EEM ) 4 - 4 - 4

Course

Code Course Name Examination Scheme

Theory

Term

work Total Internal Assessment End

Sem.

Exam Exam

Duration

(Hrs.) Test 1 Test 2 Avg.

EEC304 Electrical and

Electronics

Measurement 20 20 20 80 03 - 100

Course

Objectives Students should be able to understand working principles of various analog

and digital i nstruments & devic es used for measurement of the various

electrical parameters .

To understand the measurement of physical parameters using sensors.

Course

Outcomes Students will be able

To illustrate the working principle of measurement instruments .

To analyse the working of various analog and digital instruments in

electrical measurements.

To analyse the concept of extension of range of meters used in electrical

measurements.

To a nalyse the performance of bridges used in electrical measurement

process.

To illustrate the need for calibration process in instruments.

To analyse the performance of transducers involved in electrical

measurement.

Module Content Hours

1 Principles of Analog Instruments :

Errors in Measurement, Difference between Indicating and Integrating

Instruments. Moving coil and Moving iron Instruments, Ammeters

Shunts & Voltmeter Multiplier . Extension of ranges by using shunt,

Multipliers, Dynamometer type Wattmeter & Power Factor meters.

Reed Moving Coil type Frequency Meters. Weston type Synchroscope.

DC Permanent magnet moving coil type Galvanometers. Ballistic 16

## Page 20

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 19

Galvanometer and AC Vibration Galvanometer (only the basic

worki ng Principle and Application s).

2 Principles of Digital Instruments :

Advantages of digital meters over analogue meters. Resolution &

sensitivity of digital meters. Working principles of digital Voltmeter,

Ammeter, Frequency meter, Phase Meter, Energy meter, Tachometer

and Multi -meter . 10

3 Measurement of Resistance :

Wheatstone‟s Bridge, K elvin‟s Double Bridge and Megger. 05

4 Measurement of Inductance & Capacitance :

Maxwell‟s Inductance bridge, Maxwell‟s Inductance & Capacitance

Bridge, Hay‟s bridge, Anderson‟s Bridge, Desau gthy‟s Bridge, Schering

Bridge and Q meter 05

5 Potentiometer :

Basic potentiometer circuit, standardization, Crompton‟s Type

Potentiometer and its applications for calibration of Ammeter,

Voltmeter and Wattmeter and measurement of resistance and power. 04

6 Transducers :

Electrical Transducers, Active & Passive Transducers , Resistive

Transducer -Potentiometer, Resistance Pressure Transducer, Resistive

Position Transducer , Temperature Transducer - Resistance Thermometer,

Thermistor, Thermo couple, RTD , Inductive Transducer -Using Self

Inductance, Variable Reluctance type, Differential Output Transducers,

LVDT, RVDT , Capacitive Transducer -Capacitive Pressure Transducer

Piezo Electric Transducer, Photo Electric Transducer (Photo emissive,

Photo Conductive, Photo Voltaic) 08

Books Recommended:

Text Books:

1. Electrical & Electronic Measurements and Instrumentation by AK Sawhney, Dhanpat Rai &

Sons

2. Modern Electronic Instrumentation and Measurement Techniques by Helfric and Cooper,

Prentice Hall of India

3. Electronic Instrumentation By H.S.Kalsi, Third Edition, Tata McGraw Hill

Reference Books:

1. Principle of Measurement & Instrumentation by Alan .S.Moris, Prentice Hall of India

2. Electrical Measurement & Instrumentation by RS Sirohi & Radhakrisnan, New Age

International

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules ) and the other is either a class test or assignment on live problems or

course project.

## Page 21

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 20

Theory Examination:

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 22

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 21

University of Mumbai

Course

code Course Name Teaching scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC305 Electrical Machine -I

(abbreviated as EMC -I) 4 - 4 - 4

Course

code

Course

Name Examination Scheme

Theory

Term

Work Total Internal Assessment End

Sem.

Exam Exam

Duration

(Hrs.) Test 1 Test 2 Avg.

EEC305 Electrical

Machines -I 20 20 20 80 3 - 100

Course

Objectives Students should understand the concepts of DC machines, Reluctance

motor, Stepper motors and their applications.

To impart industry oriented learning.

Course

Outcomes Students will be able

To analyze series parallel magnetic circuits to determine circuit

parameters and losses.

To illustrate principle of energy conversion in single and double excited

machines.

To understand the performance parameters of dc machines.

To analyze the effect of performance parameters and application of dc

motors.

To analyze the performance of dc machines by conducting various test.

To illustrate the principle of operation and applications of step per motors.

Module Contents Hours

1 Basics of Magnetism

Magnetic field, Magnetic circuit, Numerical from series parallel

magnetic circuit, Flux linkage, Inductance and energy, Faraday‟s laws,

Hysteresis and eddy current losses. 04

2 Electromechanical Energy Conversion

Principle, Energy stored in magnetic field, Torque in singly excited

magnetic field, Reluctance motor, Doubly excited magnetic field,

Torque from energy and Co - energy. Dynamic equations 08

3 DC Machines

Construction of machine, Basic de sign concept of lap and wave

winding, Principle of operation, Significance of commutator and 10

## Page 23

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 22

brushes, EMF and torque equation, concept of back EMF, Armature

reaction, Methods to minimize the effect of Armature reaction,

Process of commutation, Meth ods to improve commutation .

4 DC Motor

Characteristics of DC Motors, speed -torque characteristic equations

(Drives approach), Electrical braking (Rheostatic, regenerative and

plugging with numerical and speed -torque characteristic equation),

Necessity of starter, concept of soft starting, Block diagram of soft

starter, Speed control of DC shunt and series motor, losses and

efficiency, Applications of DC motor . 14

5 Testing of DC Motor

Retardation, Bra ke load, Swinburne, Hopkinson‟s and field test. 06

6 Stepper Motor

Working principle, construction of stepper motor, Classification,

Variable reluctance stepper motor (VRSM), Permanent magnet stepper

motor, Characteristics of stepper motor (Static and dynamic

characteristic) Applications of stepper motor. (No Numerical ) 06

Books Recommended:

Text Books:

1. Bimbhra P. S., Electric Machinery , Khanna Publisher,

2. Bimbhra P. S., Generalized Machine Theory , Khanna Publisher,

3. E. G. Janardanan, Special Electrical Machines, PHI

4. S. K. Pillai, A first course on Electrical Drives, New age publication

5. V. K. Mehta, Principles of Electrical Machines, S Chand Publication

6. G. K. Dubey, Fundamentals of Electrical Drives , Narosa Publication

Reference Books:

1. M. G. Say and E. O. Taylor, Direct current ma chines , Pitman publication

2. Ashfaq Husain, Electric Machines , Dhanpat Rai and co. publications

3. M. V. Deshpande, Electric Machines , PHI

4. Vedam Subramanyam, Electrical Drive -concept and applications , TMH Publication

5. A. E. Fitzgerald, Kingsly, Stephen., Electric Machinery, Tata McGraw Hill

6. K. Venkatratnam, Special Electrical Machines,

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions o f 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 24

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 23

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL301 Electrical and

Electronics

Measurement Lab

(abbreviated E EM

Lab) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL301 Electrical

Network and

Measurement

Lab - - - - 25 - 25 50

Course

Objectives Students should be able to understand working principles of various

analog and digital i nstruments & devic es used for measurement of the

various e lectrical parameters .

To understand the measurement of physical parameters using sensors.

Course

Outcomes Students will be able

To illustrate the working principle of bridges

To do measurement of various electrical circuit parameters .

To calibrate various electrical measuring instruments .

To illustrate the concept of extension of range of meters used in electrical

measurements.

To do the measurement of various process parameters .

To illustrate the working principle of sensors

Syllabus: Same as that of Course EEC30 4 Electrical and Electronic s Measurement

Suggested List of Laboratory Experiments:

1. Measurement of the medium resistance using Wheatstone Bridge .

2. Measurement of the low resistance using Kelvin‟s Double Bridge .

3. Measurement of inductance using Maxwell‟s Bridge.

4. Measurement of inductance using Hay‟s Bridge .

5. Measurement of inductance using Anderson‟s B ridge.

6. Measurement of capacitance using Desauty‟s bridge.

## Page 25

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 24

7. Measurement of capacitance using Schering‟s bridge.

8. Calibration of Crompton DC Potentiometer.

9. Calibration of Ammeter/Voltmeter/Wattmeter using Potentiometer.

10. To measure output voltage and displacement using LVDT and draw graph to verify the

characteristics of output voltage Vs Displacement.

11. Measurement of temperature using RTD.

12. To Study various Thermocouples and Estimate their Response times.

13. Calibration of single phase energy meter by direct loading.

14. To measure output voltage and force using strain gauge and draw graph to verify the

characteristics of force Vs Output voltage.

Any other experiment based on syllabus which will help students to understand topic/concept.

Term Work:

Term work shall consist of minimum 8 experiments. The distribution of marks for term work

shall be as follows:

Experiments Performance :10 Marks

Journal :10 Marks

Attendance (Theory and Practical) :05 Marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Oral Examination:

Oral examination will be based on entire syllabus.

## Page 26

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 25

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL302 Object Oriented

Programming and

Methodology Lab

(abbreviated OOPM

Lab) - 4# - 2 2

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL302 Object

Oriented

Programming

and

Methodology

Lab - - - - 25 50 - 75

Course

Objectives To learn the object oriented programming concepts

To study various java programming constructs like multithreading,

exception handling, packages etc.

To explain components of GUI based programming.

Course

Outcomes Students will be able

To apply fundamental programming constructs.

To illustrate the concept of packages, classes and objects.

To elaborate the concept of strings, arrays and vectors.

To implement the concept of inheritance and interfaces.

To implement the notion of exception handling and multithreading.

To develop GUI based applicatio n.

• Prerequisite: Structured Programming Approach

Module Content Hours

1 OO Concepts: Object, Class, Encapsulation, Abstraction,

Inheritance, Polymorphism.

Features of Java, JVM

Basic Constructs/Notions: Constants, variables and data types,

Operators and Expressions, Revision of Branching looping 02

2 Classes, Object and Packages

Class, Object, Method. 05

## Page 27

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 26

Constructor, Static members and methods

Passing and returning Objects

Method Overloading

Packages in java, creating user defined packages, access specifiers.

3 Array, String and Vector

Arrays, Strings, String Buffer

Wrapper classes, Vector 04

4 Inheritance and Interface

Types of Inheritance, super keyword, Method Overriding,

abstract class and abstract method, final keyword,

Implementing interfaces, extending interfaces 03

5 Exception Handling and Multithreading

Error vs Exception, try, catch, finally, throw, throws, creating

own exception

Thread lifecycle, Thread class methods, creating threads,

Synchronization 04

6 GUI programming in JAVA

Applet: Applet life cycle, Creating applets, Graphics class methods,

Font and Color class, parameter passing.

Event Handling: Event classes and event listener

Introduction to AWT: Working with windows, Using AWT

controls - push Buttons, Label, Text Fields, Text Area, Check

Box, and Radio Buttons. 06

Suggested List of Programming Assignments / Laboratory Work:

1. Program on various ways to accept data through keyboard and unsigned right shift

operator.

2. Program on branching, looping, labelled break and labelled continue.

3. Program to create class with members and methods, accept and display details for

single object.

4. Program on constructor and constructor overloading

5. Program on method overloading

6. Program on passing object as argument and returning object

7. Program on creating user defined package

8. Program on 1D array

9. Program on 2D array

10. Program on String

11. Program on StringBuffer

12. Program on Vector

13. Program on single and multilevel inheritance (Use super keyword)

14. Program on abstract class

15. Program on interface demonstrating concept of multiple inheritance

16. Program on dynamic method dispatch using base class and inter face reference.

17. Program to demonstrate try, catch, throw, throws and finally.

18. Program to demonstrate user defined exception

## Page 28

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 27

19. Program on multithreading

20. Program on concept of synchronization

21. Program on Applet to demonstrate Graphics, Font and Color class.

22. Program on passing parameters to applets

23. Program to create GUI application without event handling using AWT controls

24. Program to create GUI application with event handling using AWT controls

25. Mini Project based on content of the syllabus. (Group o f 2-3 students)

Any other experiment based on syllabus which will help students to understand topic/concept.

Term Work:

Term work shall consist of minimum 1 6 experiments , assignments (min 2) and class test .

The distribution of marks for term work shall be as follows:

Experiments Performance :10 marks

Assignments :05 marks

Class Test :05 marks

Attendance :05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Practical/Oral Examination:

Practical/Oral examination will be based on entire syllabus .

## Page 29

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 28

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL303 Electronics Lab -I

(abbreviated EL Lab -I) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral

Test 1 Test 2 Avg

EEL303 Electronics

Lab-I - - - - 25 25 - 50

Course

Objectives To understand the basic concept of various electronic devices, circuits and

their application .

To develop ability among students to design and implement electronic

circuits .

Course

Outcomes Student will be able

To identify the different types of semiconductor devices and demonstrate

their applications in electronic circuits .

To determine the dc and ac parameters of semiconductor devices and

differential amplifiers .

To analyze the performance of different types of rec tifier with and without

filter.

To plot frequency response of BJT and JFET amplifier.

To analyze effect of feedback on the performance of amplifier.

To analyze the performance of different type of oscillators

Syllabus: Same as that of Course EEC302 Electronic Devices and Circuits

Suggested List of Laboratory Experiments:

1. Study of V -I characteristics of standard PN junction diode, zener diode, schottkey diode.

2. Use of diode as clipper and clamper

3. Rectifier - Filter performance analysis

4. BJT biasing network stability analysis

5. BJT Input and Output Characteristics for CE/CB/CC configuration

6. Frequency response of BJT CE amplifier

7. Study of JFET characteristics and calculation of parameters

8. Study of MOSFET characteristics and calculation of paramet ers

## Page 30

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 29

9. Frequency response of JFET CS amplifier

10. Study of negative feedback on amplifier performance

11. Study of photo devices applications

12. Study of differential BJT amplifier

13. Study of Darlington pair amplifier

14. Study of a RC phase shift oscillator

15. Study of a Wien Bridge oscillator

16. Study of a Hartley/Colpitts oscillator

Any other experiment based on syllabus which will help students to understand topic/concept.

Term work:

Term work shall consist of minimum 10 experiments. The distribution of marks for term work

shall be as follows:

Experiments performance :10 marks

Journal :10 marks

Attendance :05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Practical/Oral Examination:

Practical/Oral examination will be based on entire syllabus.

## Page 31

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 30

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL304 Electrical Machine Lab -I

(abbreviated EMC Lab-I) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL304 Electrical

Machine Lab -I - - - - 25 25 - 50

Course

Objectives Students should understand the concepts of DC machines, Reluctance

motor, Stepper motors and their applications.

To impart industry oriented learning.

Course

Outcomes Students will be able

To demonstrate different speed control methods of dc motors .

To illustrate and analyze the performance of dc motors .

Syllabus: Same as EEC -305 (Electrical Machines -I)

Suggested List of Laboratory Experiment:

1. Speed control of DC shunt motor.

2. Load test on DC shunt motor.

3. Load test on DC series motor.

4. Load test on DC compound motor.

5. Brake test on DC motor.

6. Open circuit and load characteristic of DC shunt generator.

7. Rheostatic braking of DC motor.

8. Plugging of DC motor.

9. Retardation test of DC motor.

10. Swinburne‟s test on DC motor.

11. Hopkinson‟s test on DC motor.

12. Study of Stepper motor drive.

13. Field test

Any other experiment based on syllabus which will help students to understand topic/concept.

Term work:

## Page 32

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 31

Term work shall consist of minimum 8 experiments. The distribution of marks for term work

shall be as follow s:

Experiments performance :10 marks

Journal :10 marks

Attendance :05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Practical/Oral Examination:

Practical/Oral examination will be based on entire syllabus.

## Page 33

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 32

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC401 Applied Mathematics -IV

(abbreviated as AM -IV) 4 1 4 1 5

Course

code Course Name Examination Scheme

Theory

Term

Work Total Internal

Assessment End

Sem.

Exam Exam

Duration

(Hrs) Test 1 Test 2 Avg

EEC401 Applied

Mathematics -IV 20 20 20 80 3 25 125

Course

Objectives To develop analytical insight of the student to prepare them for

graduates studies in Electrical Engineering.

To enhance their ability to solve and analyze Electrical E ngineering

problem.

To provide students with a strong mathematical foundation to acquire

the professional competence knowledge and skills.

Course

Outcomes Students will be able

To develop the proactive approach towards the selection of methods to

a solution of engineering problems.

To identify dif ferent probability distribution , learn sampling t echnique,

compute Eigen values and Eigen vectors and evaluate complex integrals

and use their application in Electrical Engineering problems.

Pre-requisites :

Basics of Complex numbers, Analytic Function, Matrices, Symmetric, Orthogonal and Unitary

matrices, Rank, Normal form, Solution of system of linear equations, L. I. & L. D. vectors,

Basics of Probability.

1

Calculus of Variation: 06

1.1 Euler‟s Langrange equation, solution of Euler‟s Langrange equation

(only results for different cases for Function) independent of a

variable, independent of another variable, independent of

differentiation of a variable and independent of both variables

1.2 Isoperimetric problems, several dependent variables

1.3 Functions involving higher order derivatives: Rayleigh -Ritz method

2 Linear Algebra: Vector Spaces 06

2.1 Vectors in n -dimensional vector space: properties, dot product, cross

product, norm and distance properties in n -dimensional vector space.

2.2 Vector spaces over real field, properties of vector spaces over real

field, subspaces.

## Page 34

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 33

2.3 The Cauchy -Schwarz inequality, Orthogonal Subspaces, Gram -

Schmidt process.

3 Linear Algebra: Matrix Theory 10

3.1 Characteristic equation, Eigen values and Eigen vectors, properties of

Eigen values and Eigen vectors

3.2 Cayley -Hamilton theorem (without proof) , examples based on

verification of Cayley - Hamilton theorem.

3.3 Similarity of matrices, Diagonalisation of matrices.

3.4

Functions of square matrix, derogatory and non -derogatory matrices.

4 Probability 10

4.1 Baye‟s Theorem (without proof)

4.2 Random variable: Probability distribution for discrete and

continuous random variables, Density function and distribution

function, expectation, variance.

4.3 Moments, Moment Generating Function.

4.4 Probability distribution: Binomial distribution, Poisson & normal

distribution (For detailed study)

5 Correlation 04

5.1 Karl Pearson‟s coefficient of correlation, Covariance, Spearman‟s

Rank correlation,

5.2 Lines of Regression.

6 Complex integration 12

6.1 Complex Integration: Line Integral, Cauchy‟s Integral theorem for

simply connected regions, Cauchy‟s Integral formula.

6.2 Taylor‟s and Laurent‟s Series

6.3 Zeros, singularities, poles of f(z), residues, Cauchy‟s Residue

theorem .

6.4 Applications of Residue theorem to evaluate real Integrals of

different types.

Reference Books:

Text books:

1. H.K. Das, “ Advanced engineering mathematics ”, S . Chand, 2008

2. A. Datta, “Mathematical Methods in Science and Engineering”, 2012

3. B.S. Grewal, “Higher Engineering Mathematics”, Khanna Publication

4. P.N.Wartilar & J.N.Wartikar, “ A Text Book of Applied Mathematics ” Vol. I & II,

Vidyarthi Griha Prakashan., Pune.

Reference Books:

1. B. V. Ramana, “Higher Engineering Mathematics”, Tata Mc -Graw Hill Publication

2. Wylie and Barret, “Advanced Engineering Mathematics”, Tata Mc -Graw Hill 6th Edition

3. Erwin Kreysizg, “Advanced Engineering Ma thematics”, John Wiley & Sons, Inc

4. Seymour Lipschutz “ Beginning Linear Algebra ” Schaum‟s outline series, Mc -Graw Hill

Publication

## Page 35

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 34

5.Seymour Lipschutz “ Probability ” Schaum‟s outline series, Mc -Graw Hill Publication

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project

Term work:

Term work shall consist of minimum eight tutorials and assignments (minimum 2).

The distribution of marks for term work shall be as follows:

Tutorials :15 marks

Assignments :05 marks

Attendance (Theory and Tutorial) :05 marks

The final certification and acceptance of term work ensures minimum passin g in the term work.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 36

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 35

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC402 Power System -I

(abbreviated as PS -I) 3 1 3 1 4

Course

code Course Name Examination Scheme

Theory

Term

Work Total Internal Assessment End

Sem.

Exam Exam

Duration

(Hrs) Test 1 Test 2 Avg

EEC402 Power System -I 20 20 20 80 3 25 125

Course

Objectives To learn Basic structure of electrical power systems, different component of

power system network.

To get knowledge of mechanical and electrical design of transmission

systems.

To learn representation of transmission systems for performance evaluation.

Course

Outcomes Students will be able

To illustrate the general structure of power system.

To illustrate purpose of different mechanical components of overhead

transmission lines.

To determine transmission line parameters for different configurations.

To a nalyze the performance of short , medium and Long transmission

lines.

To analyze the performance of transmission line for different loading

conditions.

To illustrate safety norms and regulations related to underground cables

and grounding techniques.

Module Contents Hours

1 Introduction :

Basic structure of power system: generation, transmission and

distribution, single line diagram of typical AC supply system,

comparison between AC and DC supply system, various system of

electric power transmission, choice of economic voltage for

transmission, Transmission and Distribution network in India. 02

2 Mechanical Design of Overhead lines :

Main component of overhead lines, line supports, span, conductor

configuration, sag in overhead lines, calculation of sag for equal and

unequal supports, effect of ice and wind loading, insulators, type of

insulators, potential distribution across insulato r string, string 07

## Page 37

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 36

efficiency, methods for improving string efficiency (*Numerical )

3 Transmission Line Parameters :

Resistance of transmission line, skin effect, proximity effect

Definition of inductance, Internal and external flux linkage of single

conductor, inductance of single phase two wire line, composite and

bundled conductor, inductance of three phase line with symmetrical

and unsymmetrical spacing, concept of GMR and GMD, necessity of

transposition, inductance of three phase double circuit line with

symmetrical and unsymmetrical spacing, inductance of bundle

conductor

Capacitance of transmission line, capacitance of single phase line,

capacitance of three phase line with symmetrical and unsymmetrical

spacing, effect of earth on transmission line capacitance

(*Numerical ) 12

4 Representation of power system components :

Introduction, single phase solution of balanced three phase networks,

One-Line diagram and Impedance or reactance diagram, Per

Unit(P.U.)system, advantage of Per Unit system ,p.u. impedance

diagram, representation of load (*Numerical ) 03

5 Performance of Transmission Line :

Classification and modelling of short, medium and long lines,

regulation and efficiency of short and medium lines, Ferranti effect,

evaluation and estimation of generalized circuit constant(ABCD) for

short and medium lines, surge impedance loading, tuned power line,

Power circle diagram (*Numerical ) 07

6 Underground Cable and Power System Earthing :

Underground Cable :

Classification and construction of cable ,insulation resistance of

cable, capacitance of single core and three core cable, grading of

cable, intersheath grading, capacitance grading

Power system Earthing :

Earthing definition, soil resistivity, step and touch potentials,

measurement of earth resistance, soil resistivity, neutral grounding

and its methods. 05

Note: *Numerical should be covered in Tutorials.

Books Recommended:

Text Books:

1. Wadhwa C.L. „Electrical power system‟, New Age International,4th edition,2005

2. J B. Gupta, „A Course In Power Systems‟, S. K. Kataria & Sons, 2009

3. Soni M.L., Bhatanagar U.S, Gupta P.V, „A course in electrical p ower‟, Dhampat Rai and

Sons., 1987

4. D. P. Kothari, I. J. Nagrath, „Modern Power System Analysis‟, Mc Graw Hill

5. B.R. Gupta, „Power System Analysis And Design‟, S.Chand

## Page 38

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 37

Reference Books:

1. Stevenson, Modern power system analysis, TMH publication

2. Mehta V.K., Principle of power system, S Chand

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project

Term work:

Term work shall consi st of minimum eight tutorials and assignments (min two) . The distribution

of marks for term work shall be as follows:

Tutorial :15 marks

Assignments :05 marks

Attendance (Theory and Tutorial ) :05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 39

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 38

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC403 Electrical Machine –II

(abbreviated as EMC -II) 4 - 4 - 4

Course

code Course Name Examination Scheme

Theory

Term

Work Total Internal

Assessment End

Sem.

Exam Exam

Duration

(Hrs) Test 1 Test 2 Avg

EEC403 Electrical

Machine -II 20 20 20 80 3 - 100

Course

Objectives To impart the knowledge of working principle, operations, performance

and applications of single phase and three phase Transformers.

To understand the design of transformer with its cooling system.

To understand the performance parameters of transformers

Course

Outcomes Students will be able

To illustrate the working principle of single phase and three phase

transformer

To illustrate the working principle of auto-transformer

To analyse various type of connections of three phase transformer.

To analyse performance of transformer under various operating

conditions

To illustrate various design aspects of transformer.

To analyse the characteristics of CT and VT.

Module Contents Hours

1 Single phase Transformer : - Review of EMF equation, Equivalent

Circuit, Phasor diagram, voltage regulation, Losses and Efficiency.

Condition for Maximum Efficiency, All day Efficiency, Separation

of Hysteresis and Eddy current losses. Parallel Operation: No load

Operation, On load Operation: - Equal Voltage Operation and

Unequal Voltage Operation, Testing of Transformer: - Polarity Test,

OC and SC test, Sumpner‟s Test, Impulse test 10

2 Autotransformer: - Working, Advantages of Autotransformer over

Two winding Transformer, Disadvantages. Introduction to High

Frequency Transformer, Pulse Transformer, Isolation Transformer

and its applications. 04

3 Three Phase Transformers - Construction and parts of transformer

(design approach) , Three phase transformer connections and phasor 10

## Page 40

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 39

groups. Parallel operation, Excitation Phenomenon in tra nsformers ,

Harmonics in three phase transformers, Suppression of harmonics,

Oscillating neutral phenomenon, Switching in transient

phenomenon, Open delta or V - connection, Three phase to two phase

conversion (Scott connection).

4 Introduction to machine design , Magnetic, Electrical, Conducting

and Insulating materials used in machines.

Design of Single phase and Three phase transformers: - Output

equation, Main Dimensions, Specific electric and magnetic loadings,

Design of core, Selection of the type of winding, Design of LV

and HV windings, Design of insulation. 12

5 Performance measurement of Transformers Resistance and

leakage reactance of the winding, Mechanical forces, No load current;

Cooling of transformers – design of cooling tank and tubes. Relevant

IS standards. 08

6 Current Transformers - Introduction, Terms and Definitions,

Accuracy class, Burden on CT, Vector diagram of CT

Voltage Transformers - Introduction, Theory of VT,

Specifications for VT, Terms & definitions, Ac curacy classes & uses,

Burdens on VT, Connection of VTs 04

Books Recommended:

Text Books:

1. Bimbhra P. S., Electric Machinery , Khanna Publisher,

2. Bimbhra P. S., Generalized Machine Theory, Khanna Publisher,

3. E. G. Janardanan, Special Electrical Machines, PHI

4. V. K. Mehta, Principles of Electrical Machines, S Chand Publication

5. Switchgear & Protection by Sunil.S.Rao, Khanna Publications

6. A. K. Sawhney, “Electrical Machine Design”, Dhanpat Rai & Co

7. M. V. Deshpande, “Design and Testing of Electrical Ma chines”, PHI Learning

Reference Books:

1. M.G. Say and E. O. Taylor, Direct current machines , Pitman publication

2. Ashfaq Husain, Electric Machines , Dhanpat Rai and co. publications

3. Vedam Subramanyam, Electrical Drive -concept and applications , TMH Publication

4. A. E. Fitzgerald, Kingsly, Stephen., Electric Machinery, Tata McGraw Hill

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project

## Page 41

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 40

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub qu estions of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 42

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 41

University of Mumbai

Course

code Course Name Teaching scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC404 Electromagnetic Fields

and Waves

(Abbreviated as EFW) 3 1 3 1 4

Course

Code Course Name Examination Scheme

Theory

Term

work Total Internal Assessment End

Sem.

Exam. Exam.

Duration

( Hrs) Test 1 Test 2 Avg

EEC404 Electromagnetic

Fields and

Waves 20 20 20 80 03 25 125

Course

Objectives To impart the knowledge of electro -physics.

Expose students Electric and magnetic field and their application in

electrical engineering

Course

Outcomes Students will be able

To apply knowledge of mathematics and physics in electrical engineering

field.

To analyse electrostatic and static magnetic fields.

To analys e the effect of material medium on electric and magnetic fields.

To analyse and formulate ti me varying electric and magnetic fields.

To analyse wave generation and its propagation in different media.

To analyse static magnetic field and electrostatic field distribution using

software tool.

Module Contents Hours

1

Vector Basics :

Concept of Scalar and Vector, Co -ordinate System: Rectangular,

Cylindrical and Spherical Co -ordinate System, Co -ordinate and vector

transformation, (Numerical on line, Surface and Volume Integrals) 04

2

Static Electric Fields:

Coulomb‟s Law in Vector Form, Electric Field Intensity, Definition,

Principle of Superposition, Electric Field due to point charges, Electric

Field due to line charge (one and two conductor transmission lines),

Electric Field due to an infinite uniformly c harged sheet, Definition and

physical interpretation of gradient, Electric scalar potential, Relationship 08

## Page 43

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 42

between potential and electric field and its application on Surface voltage

gradient on conductor, Potential due to electrical dipole and flux lines,

Electric Flux Density, Gauss Law, Definition and physical Significance

of Divergence, Divergence theorem

3

Static Magnetic Fields:

The Biot -Savart‟s Law in vector form, Magnetic Field intensity due to a

finite and infinite wire carrying a current I, Magnetic field intensity on

the axis of a circular loop carrying a current I, Ampere‟s circuital law and

its application on A solid cylindrical conductor and Infinitely long co -

axial transmission line, Magnetic flux density, Definition and physical

Interp retation of Curl, The Lorentz force equation for a moving charge

and its applications on Force on a wire carrying a current I placed in a

magnetic field, Torque on a loop carrying a current I, Magnetic moment,

Magnetic Vector Potential. 08

4

Electric and Magnetic Fields in Materials :

Poisson‟s and Laplace‟s equation and its application on Estimation and

control of electric stress, control of stress at an electrode edge, Electric

Polarization, Definition of Capacitance, Capacitance of two parallel

plate , Co-axial, Spherical and Capacitance of two conductor of a single

phase line, Electrostatic energy and energy density, Boundary conditions

for electric and magnetic field, Electric current, Current density, Point

form of ohm‟s law, Continuity equation for current, Definition of

Inductance, Inductance of loops and solenoids, Flux linkage within and

outside the conductor producing the flux, Energy density in magnetic

fields. 08

5

Time varying Electric and Magnetic Fields:

Faraday‟s law, Maxwell‟s Second Eq uation in integral form from

Faraday‟s Law, Equation expressed in point form, Displacement current,

Ampere‟s circuital law in integral form, Modified form of Ampere‟s

circuital law as Maxwell‟s first equation in integral form, Equation

expressed in point f orm, Maxwell‟s four equations in integral form and

differential form. 04

6

Wave theory:

Derivation of Wave Equation, Uniform Plane Waves, Maxwell‟s

equation in phasor form, Wave equation in phasor form, Plane waves in

free space and in a homogenous material, Wave equation for a

conducting medium, Plane waves in lossy dielectrics, Propagation in

good conductors, Skin effect. 04

## Page 44

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 43

Books Recommended :

Text books:

1. W. Hayt., “Engineering electromagnetic”, McGraw Hill, 4th edition, 1987.

2. Edminister, “Schaum‟s series in electromagnetic” McGraw Hill publications, 3rd edition,

1986.

3. N. Narayan Rao, “ Elements of Electromagnetic”, PHI publication, 4th edition, 2001.

4. E.C. Jordan & K.G. Balmain “ Electromagnetic Waves and Radiating Systems.” Prentice

Hall of India 2nd edition 2003. (Unit IV, V). McGraw -Hill, 9th reprint

5. G.S.N. Raju, “ Electromagnetic Field Theory and Transmission Lines” Pearson

publications, fifteenth impression,2013.

6. S. K. Singh. ,”Fundamentals of High Voltage Engineering”, Dhanpat Rai & Co. First

edition,2014.

7. Dr. B.R. Gupta.,”Power System Analysis and Design”, S. Chand, First edition,1998.

8. John D. Kraus & Keith R. Carver “Electromagne tics”, McGraw -Hill Inc. 1973.

Reference books:

1. Fenmann, “Lectures on physics”, Vol – 2, Addition Wesley, 1965

2. S. seely, “Introduction to electromagnetic fields”, McGraw Hill, 1958.

3. David K. cheng, “Field and electromagnetic”, Addison Wesley, 2nd edition, 1999.

4. Corson and lerrain, “Electromagnetic”, CBS publications, 2nd edition, 1986.

5. Ramo, Whinnery and Van Duzer: “Fields and Waves in Communications Electronics”

John Wiley & Sons (3rd edition 2003)

6. M.N.O.Sadiku : “Elements of Engineering Electromagnetics” Oxford University Press,

Third edition.

7. David K.Cherp: “Field and Wave Electromagnetics - Second Edition -Pearson Edition.

8. David J.Grithiths: “Introduction to Electrodynamics - III Edition -PHI

9. John Reitz, Frederi ck Milford, Robert Christy, “Foundations of Electromagnetic Theory”

Pearson publications, fourth impression,2013.

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project.

Term work:

Term work consists of minimum eight tutorials (at least one on each module) and assignments

(min. 2) . The distribution of the term work shall be as follows:

Tutorials :15 marks

Assignments :05 marks

Attendance (Theory and Tutorial) : 05 marks

## Page 45

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 44

The final certification and acceptance of term -work ensures the minimum passing in the term -

work.

Theory Examination :

1. Question paper wi ll comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks will be

asked.

4: Remaining question will be randomly selected from all the modules.

## Page 46

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 45

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC405 Analog and Digital

Integrated Circuits

(abbreviated as ADIC) 3 - 3 - 3

Course

Code Course

Name Examination Scheme

Theory

Term

Work Total Internal Assessment End

Sem.

Exam Exam.

Duration

(in Hrs) Test 1 Test 2 Avg

EEC405 Analog and

Digital

Integrated

Circuits 20 20 20 80 3 - 100

Course

Objectives To introduce the basic building blocks, theory and applications of linear

integrated circuits.

To develop ability among students for problem formulation, system

design and solving skills

Course

Outcomes Students will be able

To illustrate various performance parameters and characteristics of

operational amplifier.

To illustrate various linear and non -linear application of operational

amplifiers.

To design and analyse linear voltage regulators and multivibrators.

To do variou s conversion of number systems and illustrate logic

families.

To build, design and analyse combinational circuits.

To build, design and analyse sequential circuits.

Module Contents Hours

1 Operational Amplifiers: Fundamentals

Introduction to Differential amplifier, Block diagram of Op -amp

Basics of an Op -amp, Op -amp parameters, Frequency response 03

2 Application of Operational Amplifiers

Voltage follower, design of inverting and non - inverting amp, adder,

subtractor, integrator and differentiator, V to I and I to V converter,

Schmitt trigger, sample and hold circuits, active filters: first order

LPF, Instrumentation amplifier ( 3 Op -amp) with applications,

Optical isolation amplifier 08

## Page 47

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 46

3 Linear Voltage Regulators –

IC -78xx, 79xx, LM 317. Design of adjustable voltage source using

IC- LM317, Low Dropout (LDO) voltage regulator

IC-555-

Functional block diagram, Applications of IC 555, Design of

Multivibrator (Monostable and Astable) 06

4 Logic families -

Review of Number formats: Binary, hexadecimal, BCD and their

basic math operations (addition and subtraction) Introduction to

Logic gates and Boolean Algebra. Specifications of Digital IC,

Logic Families: TTL,CMOS logic families, Comparison of TTL and

CMOS , Interfacing of TTL and CMOS 06

5 Combinational Logic Circuit -

K-Maps and their use in specifying Boolean expressions upto 4

variables, Minterm, Maxterm, SOP and POS implementation

Implementing logic function using universal gates, Binary

Arithmetic ci rcuits: Adders, Subtractors (Half and Full), Multiplier,

2 bit comparators, Designing code converter circuit - binary to

gray, Gray to Binary, Multiplexer (ULM), De - multiplexers. 08

6 Sequential Logic Circuits -

Comparison of combinational & sequentia l circuit

Flip-flops -

SR, T, D, JK, Master Slave JK, Converting one flip -flop to another,

Use of debounce switch

Counters -

Modulus of counter, Design of Synchronous, Asynchronous

counters, Ripple counters, Up/Down Counter, Ring counter,

Shift Registers – Right and left shift registers 05

Books Recommended:

Text Books:

1. Gayakwad Ramakant A, Op-amps and Linear Integrated Circuits, Prentice Hall PTR,

2. Boatkar K. R., “Integrated Circuits”, Khanna Publication.

3. D. Roy Choudhury, Shali B Jain, “Linear Integrated Circuits” New Age International

Publication.

4. Millman and Halkias, „ Integrated Electronics ‟, Tata McGraw Hill,

5. A. Anand Kumar, “Fundamentals of Digital Circuits”, PHI-2009

6. Jain R.P., “Modern Digitals Electronic s”, Tata McGraw Hill, 1984.

7. Roger L. Tokheim, “Digital Electronics”, Tata McGraw Hill

Reference Books:

1. Design with OPAMP analog Ics by Sergio Franco. McGraw Hill 1998 2nd edition.

2. Boylestad Robert and Nashelsky Louis - „Electronic Devices and Circuit s‟, Prentice -

Hall of India,

3. Newman D.A., „ Electronic Circuit Analysis and Design‟ , McGraw Hill International.

## Page 48

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 47

4. David Bell, Electronic Devices and Circuits, 5e Oxford University Press

5. George Clayton, Steve Winder, „Operational Amplifiers‟, Newne s

6. Alan b. Marcovitz, “ Introduction to logic Design”, McGraw Hill International 2002.

7. Malvino & Leach, “Digital principal and Application” , Tata McGraw Hill, 1991.

8. Bignell James& Donovan Robert “ Digital Electronics”, Delmar, Thomas Learning,

2001.

9. Jog N.K. „Logic Circuits”, 2nd Edition, Naidu Publishers & Printers Pvt. Ltd 1998.

10. Paul M. Chirlian , “Analysis and Design of Integrated Electronic Circuits” , 2nd

Edition, John Wiley and Sons

11. Morris M. Mano. “ Digital Design”, Prentice Hall International – 1984.

12. Donald D. Givone, “Digital Priciples and Designs” Tata McGraw Hill

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a cla ss test or assignment on live problems or

course project.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks

will be asked.

4: Remaining question will be randomly selected from all the modules.

## Page 49

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 48

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Tutorial Theory Tutorial Total

EEC406 Electrical Network

(abbreviated as EN ) 3 1 3 1 4

Course

code Course

Name Examination Scheme

Theory

Term

Work Total Internal Assessment End

Sem.

Exam Exam

Duration

(Hrs) Test 1 Test 2 Avg

EEC406 Electrical

Network 20 20 20 80 3 25 125

Course

Objectives To impart the knowledge of various fundamental techniques for

analysis of electrical network from application point of view.

To mold creative engineers needed in education and industrial

development along with problem solving skills.

Course

Outcomes Students are able

To analyz e electrical network using different Network theorems.

To analyze electrical network using Graph theory.

To analyze the effect of switching conditions on Electrical networks

using Differential equations.

To analyze the effect of switching conditions on Electrical networks

using Laplace Transform .

To develop transfer function model of system using two port network

parameters.

To analyze time domain behavior from pole zero plot

Module Contents Hours

1 Solution of Network:

with DC Dependent S ources:

Mesh analysis, Super mesh analysis, Nodal analysis, S uper node

analysis, Source transformation and S ource shifting. Superposition

theorem, Thevenin‟s theorems and Norton‟s theorem and M aximum

power transfer theorem.

with AC S ources:

Magnetic coupling, Mesh analysis, N odal analysis, Superposition

theorem, Thevenin‟s theorems, Norton‟s theorem, Maximum power

transfer theorem and R eciprocity theorem 10

2 Graph Theory and Network Topology :

Introduction, G raph of network, Tree, Co-tree, Loop incidence matrix, 05

## Page 50

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 49

Cut set matrix, Tie set matrix and L oop current matrix , Number of

possible tree of a graph, Analysis of network equilibrium equation and

Principle of duality.

3 First Order and Second Order Differential E quations :

Behaviors of network elements under switching condition and their

representation, Solution of initial and final condition in RL, RC and

RLC networks for AC and DC sources . 05

4 The Laplace Transform :

The Laplace transform and its application to network analysis,

transient and steady state response to step, ramp and impulse signals . 05

5 Two port parameters :

Open circuit, short circuit, transmission and hybrid Parameters,

relationships between parameter sets, reciprocity and symmetry

conditions, parallel connection of two port networks 05

6 Network Functions; Poles and Zeros :

Network functions for one port and two port networks, Driving point

and transfer functions, ladder network, General network, poles and

zeros of network functions, restrictions on Pole and zero locations for

driving point functions and Transfer functions, time domain behavior

from pole - zero plot. 06

Note: Numerical should be covered in Tutorials.

Books Recommended:

Text Books:

1. W H Hayt, S M Durbin, J E Kemmerly, „ Engineering Circuit Analysis‟, 7th Edition

Tata McGraw -Hill Education.

2. M. E. Van Valkenburg, „ Network Analysis‟, 3rd Edition, PHI Learning.

3. D. Roy Choudhury, „ Networks and Systems‟, 2nd Edition, New Age International.

4. M. E. Van Valkenburg, „ Linear Circuits‟ , Prentice Hall.

Reference Books:

1. F. F. Kuo,‟ Network Analysis and synthesis‟ , John Wiley and sons.

2. N Balabanian and T.A. Bickart, „ Linear Network Theory: Analysis, Properties,

Design and Synthesis ‟, Matrix Publishers, Inc.

3. C. L.Wadhwa, „ Network Analysis and synthesis ‟, New Age international.

4. B. Somanathan Nair, “Network Analysis and Synthesis”, Elsevier Publicati ons

Assessment:

Internal Assessment consists of two tests out of which; one should be compulsory class test (on

minimum 02 Modules) and the other is either a class test or assignment on live problems or

course project.

Term work:

Term work consists of minimum eight tutorials (at least one on each module) and assignments

(min. 2) . The distribution of the term work shall be as follows:

## Page 51

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 50

Tutorials :15 marks

Assignments :05 marks

Attendance (Theory and Tutorial) : 05 marks

The final certification and acceptance of term -work ensures the minimum passing in the term -

work.

Theory Examination :

1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. Total four questions need to be solved.

3: Q.1 will be compulsory, based on entire syllabus wherein sub questions of 2 to 5 marks

will be asked.

4: Remaining question will be randomly selected from all the modules.

## Page 52

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 51

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL401 Simulation Lab -I

(abbreviated Sim Lab -I) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL401 Simulati on

Lab-I - - - - 25 - 25 50

Course

Objectives To understand basic block sets of different simulation platform used in

electrical system design.

To understand coding in different programming software‟s used in electrical

system design

Course

Outcomes Students are able

To simulates electrical circuits for their performance analysis.

To develop algorithms for electrical circuits for their performance analysis.

To simulates electronic circuits for their performance analysis.

To develop algorithms for electronic circuits for their performance analysis.

Suggested List of Laboratory Experiment:

1. Introduction to basic block sets of simulation platform.

2. Simulation of single phase bridge rectifier without filter

3. Simulation of single phase bridge rectifier with filter

4. Simulation of UJT as a relaxation oscillator

5. Algorithm on matrix operations

6. Simulation for OC and SC test of single phase transformer

7. Simulation of transmission line model

8. Algorithms to determine transmission line performance and parameters

9. Algorithm for generation of standard test signals

10. Simulation of differential equation s

11. Simulation to verify different network theorems with dependent and independent sources

12. Simulation of DC motor performance characteristics

13. Simulation / Algorithms to draw the pole zero plot of electrical network

14. Simulation / Algorithms to draw the response of electrical network for standard test

signals.

Any other simulations / algorithms based on third and four th semester syllabus, which will

help students to understand topic / concept.

## Page 53

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 52

Term work:

Term work consists of minimum 8 simulation / algorithms (at least one on each domain ). The

distribution of the term work shall be as follows:

Simulation / Algorithm :20 marks

Attendance :05 marks

The final certification and acceptance of term -work ensures the minimum passing in the term -

work.

Practical/Oral Examination:

Practical/Oral examination will be based on entire syllabus.

## Page 54

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 53

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL402 Electrical Machine Lab -II

(abbreviated EMC Lab-II) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL402 Electrical

Machine Lab -

II - - - - 25 25 - 50

Course

Objectives To impart the knowledge of working principle, operations, performance and

applications of single phase and three phase Transformers.

To understand the performance parameters of transformers

Course

Outcomes Students will be able

To demonstrate the working principle of single phase and three phase

transformer

To demonstrate the working principle of auto-transformer

To analyse various type of connections of three phase transformer.

To analyse performance of transformer under various operating

conditions

To analyse the characteristics of CT and VT.

Syllabus: Same as that of Course EEC403 Electrical Machine - II

Suggested List of Laboratory Experiment:

1. O.C & S.C. Test on 1Φ Transformer

2. Sumpner‟s Test on 1Φ Transformer

3. Separation of iron loss into hysteresis and eddy current loss components in a1Φ

Transformer

4. Load Test on 1Φ Transformer

5. Open circuit & Short circuit test on three phase transformer

6. Parallel operation of transformers

7. Scott connection of transformer

8. Open Delta connection of transformer

Any other experiment based on syllabus which will help students to understand topic/concept.

## Page 55

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 54

Term work:

Term work shall consist of minimum 6 experiments. The distribution of marks shall be as

follows:

Experiments Performance :10 marks

Journal :10 marks

Attendance (Theory and Practical) :05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Practical/Oral Examination:

Practical/Oral examination will be based on entire syllabus.

## Page 56

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 55

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL403 Electronics Lab -II

(abbreviated EL Lab -II) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL403 Electronics

Lab-II - - - - 25 25 - 50

Course

Objectives To introduce the basic building blocks, theory and applications of

linear integrated circuits.

To develop ability among students for problem formulation, system

design and solving skills

Course

Outcomes Students will be able

To demonstrate various performance parameters and characteristics of

operational amplifier.

To demonstrate various linear and non -linear application of

operational amplifiers.

To build, design, and analyse linear voltage regulators and multi

vibrators. .

To build, design and analyse combinational circuits.

To build, design and analyse sequential circuits.

Syllabus: Same as that of Course EEC405 Analog and Digital Integrated Circuits.

Suggested List of Laboratory Experiments:

1. Linear applications of op-amp

2. Non linear applications of op -amp

3. Active filters

4. Design and implementation of variable voltage regulator using IC 317

5. Design and implementation of astable multivibrator

6. Design and implementation of monostable multivibrator

7. Design and implementation of VCO.

8. Implementing a Binary to Gray, gray to binary or Binary to XS3 code converter using

gate ICs.

9. Constructing flip -flops like SR, D, JK and T using all NAND gates and a debounce

## Page 57

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 56

switch.

10. Designing a mod N counter where N <14 using J K flip -flops and D flip -flops.

11. Design of a ripple counter

12. Design two bit comparator using gate ICs.

13. Building of a ring counter and twisted ring counter using D flip -flop ICs.

14. Any one of the following

(i) Full Adder using Gates and using Decoder or a Multiplexer.

(ii) Using a s hift register as a sequence generator.

Any other experiment based on syllabus which will help students to understand topic/concept.

Term work:

Term work shall con sist of minimum 10 experiments . The distribution of marks for term work

shall be as follows:

Experiments Performance :10 marks

Journal :10 marks

Attendance (Theory and Practical) :05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Practical/Oral Examination:

Practical/Oral e xamination will be based on entire syllabus.

## Page 58

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 57

University of Mumbai

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Theory Practical Total

EEL404 Electrical Workshop

(abbreviated EW/S ) - 2 - 1 1

Course

Code Course Name Examination Scheme

Total Theory Practical

Internal Assessment End

Sem.

Exam Term

Work Pract.

and

Oral Oral Test 1 Test 2 Avg

EEL404 Electrical

Workshop - - - - 25 - 25 50

Course

Objectives To introduce the basic laboratory instruments used for measurement

purpose .

To develop the ability to handle electrical equipment.

Course

Outcomes Students will be able

To demonstrate various electrical and electronic measuring

equipment‟s.

To identify various electrical and power electronic components.

To repair and do maintenance of households appliances .

To identify and use different low voltage protective switchgears .

To identify and use different wiring accessories and tools .

Syllabus: -

Module Contents Hours

1

Introduction of lab equipment’s and electrical elements:

Introduction to different equipment in the lab (multi -meter, CRO,

DSO, power supplies, function generators);

Resistors, presets, potentiometers, inductors (iron core and ferrite

core), capacitors of different ratings.

Electromagnetic Relays, MOVs, 03

2

Introduction to different electronic components:

different ratings, packages, terminals, sizes and shapes, testing

methods of diodes (rectifier, ultrafast, schotkey, power, zener, LED),

transistors(BJT), SCRs, GTOs, MOSFETs, IGBTs, DIACs, TRIACs,

intelligent power modules (IPM) (Minimum Three)

Different PCB connectors, Terminal, Terminal Blocks;

Transformers used for electronic circuits (pulse, high frequency ) 03

## Page 59

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 58

3 Commonly used ICs:

Data sheet reading of commonly used ICs (buffers,opto -couplers, gate

drivers, PWM ICs, Real time clock ICs, PLL ICs, seven segment

display and driver) (Minimum Three) 04

4 Hardware implementation of Electronics circuits:

Soldering techniques and equipments, PCB Layout (artwork) design

using software and Fabrication itching process. Testing and debugging

process of assembled circuits 06

5

Residential/ Industrial Wiring:

Wiring materials, selection of wire, different switching and protection

devices (MCBs/ Fuses/Relays), Cables and cable management

Estimation and costing of residential wiring (Simple numerical on

wiring of single room), connection of energy meter and distribution

board, wiring standards (IS -732, sectio n 4) 04

6

Repair of house hold appliances and machines:

Testing, fault finding, Dismantling, assembling and testing after repairs

of house hold appliances like fan and regulator, heater, geyser, mixer,

washing machine , microwave oven etc.( minimum Two)

Troubleshooting charts for 1 ph and 3ph transformers and motors

(Minimum one transformer and one motor) 04

Books Recommended:

:

1. J. B. Gupta Electrical Installation Estimating & costing

2. Raina Bhattachraya Estimating dsign & costing

3. Allasappan & Ekambarm Estimating design & costing

4. S L Uppal Estimating & costing

5. Surjit Singh Electrical Estimating & costing

6. K B. Bhatia: Electrical Appliances

Suggested List of Laboratory Experiments:

1. Study of different symbols and tools used in Electrical Engineering

2. Identify values of different resistors and capacitor using color code and DMM

3. Identify di fferent types of cables/wires, switches and their uses.

4. Identify different types of fuses & fuse carriers, MCB and ELCB, MCCB with ratings

and usage.

5. Wiring of simple light circuit for controlling light/fan point (PVC conduit wiring and

wiring accessories)

6. Wiring of fluorescent lamps and light sockets (6 A).

7. Wiring of Power circuit for controlling power dev ice (16A socket)

8. Design of Staircase wiring / Go-down wiring / Tunnel wiring

## Page 60

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 59

9. Demonstration and measurement of power /energy consumption and repair maintenance

of electric iron/mixer grinder/ washing machine/refrigerator/ air conditioner/water

heater/geyser/single phase pump/exhaust fan .

10. Verifying the fusing time of rewireable fuses.

11. To identify terminology of various semicond uctor devices.

Any other experiment based on syllabus which will help students to understand topic/concept.

Term Work:

Term work shall con sist of minimum 8 experiments . The distribution of marks for term work

shall be as follows:

Laboratory Performance : 10 marks

Journal : 10 marks

Attendance : 05 marks

The final certification and acceptance of term work ensures the minimum passing in the term

work.

Oral Examination:

Oral examination will be based on entire syllabus.

## Page 61

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 60

Program Structure for

TE Electrical Engineering

University of Mumbai

(With Effect from 2018 -19)

Scheme for Semester V

Course Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Tutorial Theory Practical Tutorial Total

EEC501 Power System - II 4 - 1 4 - 1 5

EEC502 Electrical Machines - III 4 - - 4 - - 4

EEC503 Control System - I 4 - - 4 - - 4

EEC504 Power Electronics 4 - - 4 - - 4

EEDLO 501X Department Level Optional Course -I 3 - 1 3 - 1 4

EEL501 Business Communication and Ethics - 4** - - 2 - 2

EEL502 Control System Lab - 2 - - 1 - 1

EEL503 Electrical Machines Lab - III - 2 - - 1 - 1

EEL504 Power Electronics Lab - 2 - - 1 - 1

Total 19 10 2 19 5 2 26

** Out of four hours, 2 hours theory shall be taught to entire class and 2 hours practical in batches

## Page 62

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 61

Examination Scheme for Semester V

Course

Code Course Name Examination Scheme

Total

Marks Theory

Term Work Practical

Oral

Pract./Oral External

(UA) Internal

(CA)

Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks

EEC501 Power System - II 80 32 20 8 25 10 - - - - - - 125

EEC502 Electrical Machines - III 80 32 20 8 - - - - - - - - 100

EEC503 Control System - I 80 32 20 8 - - - - - - - - 100

EEC504 Power Electronics 80 32 20 8 - - - - - - - - 100

EEDLO

501X Department Level Optional

Course -I 80 32 20 8 25 10 - - - - - - 125

EEL501 Business Communication and

Ethics - - - - 50 20 - - - - - - 50

EEL502 Control System Lab - - - - 25 10 - - 25 10 - - 50

EEL503 Electrical Machines Lab - III - - - - 25 10 - - - - 25 10 50

EEL504 Power Electronics Lab - - - - 25 10 - - - - 25 10 50

Total 400 - 100 - 175 - - - 25 - 50 - 750

## Page 63

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 62

Program Structure for

TE Electrical Engineering

University of Mumbai

(With Effect from 201 8-19)

Scheme for Semester VI

Course Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Tutorial Theory Practical Tutorial Total

EEC601 Protection and Switchgear

Engineering 3 - - 3 - - 3

EEC602 Electrical Machines - IV 4 - - 4 - - 4

EEC603 Signal processing 3 - 1 3 - 1 4

EEC604 Microcontroller and its Applications 4 - - 4 - - 4

EEC605 Control System - II 4 - - 4 - - 4

EEDLO60 2X Department Level Optional Course -II 3 - 1 3 - 1 4

EEL601 Electrical Protection Lab - 2 - - 1 - 1

EEL602 Electrical Machines Lab - IV - 2 - - 1 - 1

EEL603 Microcontroller Lab - 2 - - 1 - 1

EEL604 Simulation Lab – II - 2 - - 1 - 1

Total 21 8 2 21 4 2 27

## Page 64

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 63

Examination Scheme for Semester VI

Course

Code Course Name Examination Scheme

Total

Marks Theory

Term Work Practical

Oral

Pract./Oral External

(UA) Internal

(CA)

Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks

EEC601 Protection and Switchgear

Engineering 80 32 20 8 - - - - - - - - 100

EEC602 Electrical Machines - IV 80 32 20 8 - - - - - - - - 100

EEC603 Signal processing 80 32 20 8 25 10 - - - - - - 125

EEC604 Microcontroller and its

Applications 80 32 20 8 - - - - - - - - 100

EEC605 Control System - II 80 32 20 8 - - - - - - - - 100

EEDLO602

X Department Level Optional

Course -II 80 32 20 8 25 10 - - - - - - 125

EEL601 Electrical Protection Lab - - - - 25 10 - - 25 10 - - 50

EEL602 Electrical Machines Lab - IV - - - - 25 10 - - - - 25 10 50

EEL603 Microcontroller Lab - - - - 25 10 - - - - 25 10 50

EEL604 Simulation Lab – II - - - - 25 10 - - 25 10 - - 50

Total 480 - 120 - 150 - - - 50 - 50 - 850

## Page 65

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 64

Program Structure for

BE Electrical Engineering

University of Mumbai

(With Effect from 2019 -20)

Scheme for Semester VII

Course Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Tutorial Theory Practical Tutorial Total

EEC 701 Power System - III 4 - 1 4 - 1 5

EEC7 02 Drives and Control 4 - - 4 - - 4

EEC7 03 High Voltage Direct Current

Transmission 4 - - 4 - - 4

EEDLO 703X Department Level Optional

Course -III 3 - 1 3 - 1 4

ILO701X Institute Level Optional Course -I 3 - - 3 - - 3

EEL7 01 Simulation Lab - III - 2 - - 1 - 1

EEL702 Drives and Control Lab - 2 - - 1 - 1

EEL7 03 Project -I - 6 - - 3 - 3

Total 18 10 2 18 5 2 25

## Page 66

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 65

Examination Scheme for Semester VI I

Course

Code Course Name Examination Scheme

Total

Marks Theory

Term Work Practical

Oral

Pract./Oral External

(UA) Internal

(CA)

Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks

EEC701 Power System - III 80 32 20 8 25 10 - - - - - - 125

EEC702 Drives and Control 80 32 20 8 - - - - - - - - 100

EEC703 High Voltage Direct Current

Transmission 80 32 20 8 - - - - - - - - 100

EEDLO

703X Department Level Optional

Course -III 80 32 20 8 25 10 - - - - - - 125

ILO701

X Institute Level Optional Course -I 80 32 20 8 - - - - - - - - 100

EEL701 Simulation Lab - III - - - - 25 10 - - 25 10 - - 50

EEL702 Drives and Control Lab - - - - 25 10 - - - - 25 10 50

EEL703 Project -I - - - - 25 10 - - 25 10 - - 50

Total 400 - 100 - 125 - - - 50 - 25 - 700

## Page 67

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 66

Program Structure for

BE Electrical Engineering

University of Mumbai

(With Effect from 2019 -20)

Scheme for Semester VIII

Course

Code Course Name Teaching Scheme

(Contact Hours) Credits Assigned

Theory Practical Tutorial Theory Practical Tutorial Total

EEC 801 Design, Management and Auditing of

Electrical Systems 4 - 1 4 - 1 5

EEC8 02 Flexible AC Transmission System 4 - - 4 - - 4

EEDLO 80

4X Department Level Optional Course -IV 3 - 1 3 - 1 4

ILO802X Institute Level Optional Course -II 3 - - 3 - - 3

EEL8 01 Simulation Lab - IV - 2 - - 1 - 1

EEL802 Electrical System Design Lab 2 - - 1 - 1

EEL803 Project -II - 12 - - 6 - 6

Total 14 16 2 14 8 2 24

## Page 68

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 67

Examination Scheme for Semester VIII

Course

Code Course Name Examination Scheme

Total

Marks Theory

Term Work Practical

Oral

Pract./Oral External

(UA) Internal

(CA)

Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks Max

Marks Min

Marks

EEC801 Design, Management and

Auditing of Electrical Systems 80 32 20 8 25 10 - - - - - - 125

EEC802 Flexible AC Transmission

System 80 32 20 8 - - - - - - - - 100

EEDLO

804X Department Level Optional

Course -IV 80 32 20 8 25 10 - - - - - - 125

ILO802

X Institute Level Optional Course -II 80 32 20 8 - - - - - - - - 100

EEL801 Simulation Lab - IV - - - - 25 10 - - 25 10 - - 50

EEL802 Electrical System Design Lab 25 10 - - 25 10 - - 50

EEL803 Project -II - - - - 50 20 - - 50 20 - - 100

Total 320 - 80 - 150 - - - 100 - - - 650

## Page 69

University of Mumbai, Electrical Engineering, Rev. 2016 -17 Page 68

List of Department Level Optional Courses List of Institute Level Optional Courses

Course Code Department L evel Optional Course - I

EEDLO5011 Communication Engineering

EEDLO5012 Renewable Energy and Energy Storage

EEDLO5013 Utilization of Electrical Energy

Course Code Department L evel Optional Course - II

EEDLO6021 Digital Communication Engineering

EEDLO6022 Micro -grid

EEDLO6023 Advanced Power Electronics

Course Code Department L evel Optional Course - III

EEDLO7031 High Voltage Engineering

EEDLO7032 Electric Vehicle Technology

EEDLO7033 Industrial Controller

EEDLO7034 Power Quality

Course Code Department L evel Optional Course - IV

EEDLO8041 Illumination Engineering

EEDLO8042 Smart Grid

EEDLO8043 Power System Modeling and Control

EEDLO8044 Power System Planning and Reliability

Course Code Institute L evel Optional Course - I

ILO7011 Product Lifecycle Management

ILO7012 Reliability Engineering

ILO7013 Management Information System

ILO7014 Design of Experiments

ILO7015 Operation Research

ILO7016 Cyber Security and Laws

ILO7017 Disaster Management and Mitigation Measures

ILO7018 Energy Audit and Management

ILO7019 Development Engineering

Course Code Institute L evel Optional Course - II

ILO8021 Project Management

ILO8022 Finance Management

ILO8023 Entrepreneurship Development and Management

ILO8024 Human Resource Management

ILO8025 Professional Ethics and Corporate Social

Responsibility (CSR)

ILO8026 Research Methodology

ILO8027 IPR and Patenting

ILO8028 Digital Business Management

ILO8029 Environmental Management