N Equivalence or Alternate subject of the BE Programe Revised 2016 to Rev 2019_1 Syllabus Mumbai University


N Equivalence or Alternate subject of the BE Programe Revised 2016 to Rev 2019_1 Syllabus Mumbai University by munotes

Page 1

Page 2

Copy for information and necessary action : -

1. The Deputy Registrar, College Affiliations & Development Department
(CAD),
2. College Teachers Approval Unit (CTA),
3. The Deputy Registrar, (Admissions, Enrolment, Eligibility and
Migration Department (AEM),
4. The Deputy Registrar, Academic Appointments & Quality Assurance
(AAQA)
5. The Deputy Registrar, Research Administration & Promotion Cell
(RAPC),
6. The Deputy Registrar, Executive Authorities Section (EA)
He is requested to treat this as action taken report on the concerned
resolution adopted by the Academic Council referred to the above
circular.

7. The Deputy Registrar, PRO, Fort, (Publication Section),
8. The Deputy Registrar, Special Cell,
9. The Deputy Registrar, Fort Administration Department
(FAD) Record Section,
10. The Deputy Registrar, Vidyanagari Administration Department
(VAD),


Copy for information : -


1. The Director, Dept. of Information and Communication Technology
(DICT), Vidyanagari,
He is requested to upload the Circular University Website
2. The Director of Department of Student Development (DSD) ,
3. The Director, Institute of Distance and Open Learning (IDOL Admin),
Vidyanagari,
4. All Deputy Registrar, Examination House,
5. The Deputy Registrars, Finance & Accounts Section,
6. The Assistant Registrar, Administrative sub -Campus Thane,
7. The Assistant Registrar, School of Engg. & Applied Sciences, Kalyan,
8. The Assistant Registrar, Ratnagiri sub -centre, Ratnagiri,
9. P.A to Hon’ble Vice -Chancellor,
10. P.A to Pro -Vice-Chancellor,
11. P.A to Registrar,
12. P.A to All Deans of all Faculties,
13. P.A to Finance & Account Officers, (F & A.O),
14. P.A to Director, Board of Examinations and Evaluation,
15. P.A to Director, Innovation, Incubation and Linkages,
16. P.A to Director, Department of Li felong Learning and Extension (D LLE),
17. The Receptionist,
18. The Telephone Operator,

Copy with compliments for information to : -

19. The Secretary, MUASA
20. The Secretary, BUCTU.


Page 3

AC- 01/11/2023
Item No. – 6.17




UNIVERSITY OF MUMBAI


BACHELOR OF ENGINEERING
SUBJECTS EQUIVALENCE
REV -2016’ B SCHEME to REV -2019’ C SCHEME
Under
FACULTY OF SCIENCE & TECHNOLOGY

Page 4

2
Index
Sr. No Branch Page no.
1 Civil Engineering 3
2 Mechanical Engineering 6
3 Electrical Engineering 9
4 Production Engineering 12
5 Electronics and Telecommunication Engineering 14
6 Electronics Engineering 18
7 Information Technology 20
8 Automobile Engineering 23
9 Mechatronic Engineering 26
10 Biomedical Engineering 29
11 Instrumentation Engineering 31
12 Computer Engineering 35
13 Chemical Engineering 38

Page 5

3

CIVIL ENGINEERING SUBJECTS EQUIVALENCE ( R 2016 - R 2019)
CIVIL ENGINEERING SUBJECTS EQUIVALENCE (SEM -III) (R -2016 to R -2019)

CIVIL ENGINEERING SUBJECTS EQUIVALENCE (SEM -IV) (R -2016 to R -2019)
Sr.
No. R-2016 CBCGS Subject R-2019 CBCGS Subject
Subject Code Subject Name Sem Subject Code Subject Name Sem Remark
1 CE-C401 Applied Mathematics – IV IV CEC401 Engineering Mathematics IV IV Equivalent
2 CE-C402 Surveying – II IV CEC403 Survey IV Alternate
3 CE-C403 Structural Analysis – I IV CEC402 Structural Analysis IV Alternate
4 CE-C404 Building Design & Drawing IV CEC304 Architectural Planning &
Design of Buildings III Equivalent
5 CE-C405 Building Materials &
Construction Technology IV CEC404 Building Materials &
Concrete Technology IV Equivalent
6 CE-C406 Fluid Mechanics - II IV CEC405 Fluid Mechanics - II IV Equivalent


Sr.
No. R-2016 CBCGS Subject R-2019 CBCGS Subject
Subject Code Subject Name Sem Subject Code Subject Name Sem Remark
1 CE-C301 Applied Mathematics III III CEC301 Engineering Mathematics -III III Equivalent
2 CE-C302 Surveying – I III CEC403 Survey IV Alternate
3 CE-C303 Strength of Materials III CEC302 Mechanics of Solids III Equivalent
4 CE-C304 Engineering Geology III CEC303 Engineering Geology III Equivalent
5 CE-C305 Fluid Mechanics - I III CEC305 Fluid Mechanics - I III Equivalent

Page 6

4
CIVIL ENGINEERING SUBJECTS EQUIVALENCE (SEM -V) (R -2016 to R -2019)

Sr.
No. R-2016 CBCGS Subject R-2019 CBCGS Subject
Subject Code Subject Name Sem Subject Code Subject Name Sem Remark
1 CE-C501 Structural Analysis – II V CEC402 Structural Analysis IV Alternate
2 CE-C502 Geotechnical Engineering -I V CEC503 Geotechnical Engineering -I V Equivalent
3 CE-C503 Applied Hydraulics V CEC502 Applied Hydraulics V Equivalent
4 CE-C504 Environmental Engineering -I V CEC604 Environmental Engineering VI Alternate
5 CE-C505 Transportation Engineering -I V CEC504 Transportation Engineering V Alternate
6 DLO506X DLOC -I V
7 CE-DLO5061 Advanced Surveying V CEDLO5011 Modern Surveying Instruments & Techniques V Equivalent
8 CE-DLO5062 Advanced Concrete Technology V CEDLO5017 Advanced Concrete Technology V Equivalent
9 CE-DLO5063 Building Services & Repairs V CEDLO5012 Building Services & Repairs V Equivalent
10 CE-DLO5064 Advanced Structural Mechanics V CEDLO5014 Advanced Structural Mechanics V Equivalent

CIVIL ENGINEERING SUBJECTS EQUIVALENCE (SEM -VI) (R -2016 to R -2019)

Sr.
No. R-2016 CBCGS Subject R-2019 CBCGS Subject
Subject Code Subject Name Sem Subject Code Subject Name Sem Remark
1 CE-C601 Geotechnical Engineering. – II VI CEC603 Geotechnical Engineering -II VI Equivalent
2 CE-C602 Design and Drawing of Steel
Structures VI CEC601 Design & Drawing of Steel Structures VI Equivalent
3 CE-C603 Transportation Engineering. – II VI CEDLO5016 Transportation Planning & Economics V Equivalent
4 CE-C604 Environmental Engineering. – II VI CEC604 Environmental Engineering VI Alternate
5 CE-C605 Water Resource Engineering –I VI CEC602 Water Resources Engineering VI Equivalent
6 CE-DLO606X DLOC -II VI
7 CE-DLO6061 Advanced Construction Equipment VI CEDLO6013 Construction Equipment & Techniques VI Equivalent
8 CE-DLO6062 Traffic Engineering and
Management VI CEDLO6017 Traffic Engineering and Management VI Equivalent
9 CE-DLO6063 Ground Improvement Techniques VI CEDLO7023 Ground Improvement techniques VII Equivalent
10 CE-DLO6064 Advanced Structural Analysis VI CEDLO6016 Computational Structural Analysis VI Equivalent


Page 7

5
CIVIL ENGINEERING SUBJECTS EQUIVALENCE (SEM -VII) (R -2016 to R -2019)

Sr.
No. R-2016 CBCGS Subject R-2019 CBCGS Subject
Subject Code Subject Name Sem Subject Code Subject Name Sem Remark
1 CE-C701 Quantity Survey Estimation and
Valuation VIII CEC702 Quantity Survey, Estimation and Valuation VII Equivalent
2 CE-C702 Theory of Reinforced Concrete
Structures VIII CEC501 Theory of Reinforced Concrete Structures V Equivalent
3 CE-C703 Water Resource Engineering –II VIII CEDLO8012 Design of Hydraulic Structures VIII Equivalent
4 CE-DLO704X DLOC -III VIII
5 CE-DLO7041 Pre-stressed Concrete VIII CEDLO7011 Pre-stressed Concrete VII Equivalent
6 CE-DLO7042 Solid Waste management VIII CEDLO7022 Solid and Hazardous Waste Management VII Equivalent
7 CE-DLO7043 Pavement Sub -grade and Materials VIII CEDLO7016 Pavement Materials Construction and Maintenance VII Equivalent
8 CE-DLO7044 Structural Dynamics VIII CEDLO8025 Structural Dynamics VIII Equivalent
9 CE-DLO7045 Application of GIS and Remote
Sensing VIII CEDLO5011 Modern Surveying Instruments and Techniques V Alternate
10 CE-DLO7046 Foundation Analysis and Design VIII CEDLO7021 Foundation Analysis and Design VII Equivalent

CIVIL ENGINEERING SUBJECTS EQUIVALENCE (SEM -VIII) (R -2016 to R-2019)

Sr.
No. R-2016 CBCGS Subject R-2019 CBCGS Subject
Subject Code Subject Name Sem Subject Code Subject Name Sem Remark
1 CE-C801 Design and Drawing of Reinforced
Concrete Structures VIII CEC701 Design and Drawing of Reinforced Concrete
Structures VII Equivalent
2 CE-C802 Construction Management VIII CEC801 Construction Management VIII Equivalent
3 CE-DLO803X DLOC -IV
4 CE-DLO 8031 Advanced Design of Steel Structures VIII CEDLO7027 Advanced Steel Structures VII Equivalent
5 CE-DLO8032 Industrial Waste Treatment VIII CEDLO8015 Industrial Waste Treatment VIII Equivalent
6 CE – DLO8033 Pavement Design and Construction VIII CEDLO8014 Pavement Design VIII Equivalent
7 CE-DLO 8034 Bridge Engineering and Design VIII CEDLO8011 Bridge Engineering VIII Equivalent
8 CE-DLO 8035 Appraisal Implementation of
Infrastructure Projects VIII CEDLO7013 Appraisal Implementation of Infrastructure Projects VII Equivalent
9 CE-DLO8036 Soil Dynamics VIII CEDLO8016 Soil Dynamics VIII Equivalent
10 CE-DLO8037 Applied Hydrology and Flood
Control VIII CEDLO7012 Applied Hydrology and Flood Control VII Equivalent

Page 8

6
MECHANICAL ENGINEERIN G SUBJECTS EQUIVALENCE (R 2016 - R 2019)

Mechanical Engineering: Equivalent Subjects (Rev -2016 to Rev 2019)

Sr No Scheme R 2016 CBCGS Scheme R 2019 CBCS

Subject code Subject Name Subject code Subject Name Sem
Sem VIII
1 MEC801 Design of Mechanical Systems MEC701 Design of Mechanical Systems VII
2 MEC802 Industrial Engineering and
Management MEC801 Operation Planning and Control VIII
3 MEC803 Power Engineering MEC602 Turbo Machinery VI
4 MEDLO8041 Power Plant Engineering MEDLO7032 Renewable Energy Sources VII
MEDLO8042 Rapid Prototyping HC3DP601 3D Printing: Introduction & Processes VI
MEDLO8043 Renewable Energy Systems MEDLO7032 Renewable Energy Systems VII
MEDLO8044 Energy Management in Utility Systems ILO7018 Energy Audit and Management VII
Sem VII

MEC701 Machine Design II MEC601 Machine Design VI

MEC702 CAD/CAM/CAE MEC404 CAD/CAM IV

MEC703 Production Planning and Control MEC801 Operations Planning and Control VII

MEDLO703X Department Level Optional Course III

MEDLO7031 Mechanical Vibrations MEDLO7042 Vibration Controls VII
MEDLO7032 Automobile Engineering MEDLO7033 Vehicle Systems VII

Page 9

7

MEDLO7033 Pumps, Compressors and Fans MEC602 Turbo Machinery VI

MEDLO7034 Computational Fluid Dynamics MEDLO5013 Computational Methods V
Sem VI

MEC601 Metrology and Quality engineering MEC501 Mechanical Measurements and Controls V

MEC602 Machine Design I MEC601 Machine Design VI

MEC603 Finite Element analysis MEC504 Finite Element Analysis V

MEC604 Refrigeration and Air Conditioning MEC603 Heating, Ventilation, Air conditioning and Refrigeration V

MEDLO602X Department Level Optional Course II
MEDLO6021 Mechatronics MEC604 Automation & AI VI
MEDLO6022 Robotics HRBC501 Industrial Robotics (Honours) VI
MEDLO6023 Industrial Automation MEC604 Automation and Artificial Intelligence VI
Sem V

MEC501 Internal Combustion Engines MEC502 Thermal Engineering V

MEC502 Mechanical Measurements and Control MEC501 Mechanical Measurements and Controls V

MEC503 Heat Transfer MEC502 Thermal Engineering V

MEC504 Dynamics of Machinery MEC503 Dynamics of Machinery V

MEDLO 501X Department Level Optional Course I
MEDLO5011 Press Tool Design MEDLO6021 Press Tool Design VI
MEDLO5012 Machining Sciences and Tool Design MEDLO6022 Tool Engineering VI
MEDLO5013 Design of Jigs and Fixtures MEDLO8063 Total Quality Management VIII

Page 10

8
Sem IV

MEC401 Applied Mathematics IV MEC401 Engineering Mathematics -IV IV

MEC402 Fluid Mechanics MEC402 Fluid Mechanics IV

MEC403 Industrial Electronics MEC405 Industrial Electronics IV

MEC404 Production Process II MEC303 Production Processes III

MEC405 Kinematics of Machinery MEC403 Kinematics of Machinery IV
Sem III

MEC301 Applied Mathematics III MEC301 Engineering Mathematics -III III

MEC302 Thermodynamics MEC305 Thermodynamics III

MEC303 Strength of Materials MEC302 Strength of Materials III

MEC304 Production Process I MEC303 Production Processes III
MEC305 Material Technology MEC304 Materials and Metallurgy III








Page 11

9
ELECTRICAL ENGINEERING

Electrical Engineering Subject Equivalence (Rev -2016 to Rev -2019)

Rev-2016 Sem. VIII Electrical Engineering Subject Equivalence
Code Rev-2016 CBCGS Subjects Sem Rev-2019 Subjects Code Sem Remark
EEC801 Design, Management and Auditing of
Electrical Systems VIII Electrical System Design, Management
and Auditing EEC801 VIII Equivalence
EEC802 Flexible AC Transmission System VIII Power Quality and FACTs EEDO8011 VIII Equivalence
EEDLO8041 Illumination Engineering VIII Lighting System Design EEDO8022 VIII Equivalence
EEDLO8042 Smart Grid VIII Electric Vehicle System Design EEDO 8024 VIII Alternate
EEDLO8043 Power System Modeling and Control VIII Power System Dynamics and Control EEDO7022 VII Equivalence
EEDLO8044 Power System Planning and Reliability VIII Power System Planning and Reliability EEDO8021 VIII Equivalence

Rev-2016 Sem. VII Electrical Engineering Subject Equivalence
Code Rev-2016 CBCGS Subjects Sem Rev-2019 Subjects Code Sem Remark
EEC701 Power System III VII Electrical Power System III EEC702 VII Equivalence
EEC702 Drives And Control VII Electrical Drives And Control EEC701 VII Equivalence
EEC703 High Voltage Direct Current
Transmission VII HVDC Transmission Systems EEDO7012 VII Equivalence
EEDLO7031 High Voltage Engineering VII High Voltage Engineering EEDO6013 VI Equivalence
EEDLO7032 Electric Vehicle Technology VII Electric And Hybrid Electric Vehicle EEC405 IV Equivalence
EEDLO7033 Industrial Controller VII Automation And Control EDO8012 VIII Alternate
EEDLO7034 Power Quality VII Internet of Things EEDO7013 VII Alternate

Page 12

10
Rev-2016 Sem. VI Electrical Engineering Subject Equivalence
Code Rev-2016 CBCGS Subjects Sem Rev-2019 Subjects Code Sem Remark
EEC601 Protection And Switchgear
Engineering VI Power System Protection & Switchgear EEC601 VI Equivalence
EEC602 Electrical Machines IV VI Electrical Machines II EEC501 V Equivalence
EEC603 Signal Processing VI Signals And Systems EEC604 VI Equivalence
EEC604 Microcontroller And Its Application VI Microcontroller Applications EEC602 VI Equivalence
EEC605 Control System -II VI Control System Design EEC603 VI Equivalence
EEDLO6021 Digital Communication Engineering VI Analog and Digital Communication EEDO5014 V Alternate
EEDLO6022 Microgrid VI Microgrid and Smart -grid EEDO7021 VII Alternate
EEDLO6023 Advanced Power Electronics VI Advanced Power Electronics EEDO5012 V Equivalence
Rev-2016 Sem. V Electrical Engineering Subject Equivalence
Code Rev-2016 CBCGS Subjects Sem Rev-2019 Subjects Code Sem Remark
EEC501 Power System II V Electrical Power System II EEC502 V Equivalence
EEC502 Electrical Machines III V Electrical AC Machines I EEC402 IV Alternate
EEC503 Control System -I V Control Systems EEC503 V Equivalence
EEC504 Power Electronics V Power Electronics Devices And Circuits EEC404 IV Equivalence
EEDLO5011 Communication Engineering V Cyber Physical Systems EEDO8023 VIII Alternate
EEDLO5012 Renewable Energy And Energy
Storage V Renewable Energy Sources EEDO5011 V Equivalence
EEDLO5013 Utilization Of Electrical Energy V Electric Traction EEDO6012 VI Alternate
Rev-2016 Sem. IV Electrical Engineering Subject Equivalence
Code Rev-2016 CBCGS Subjects Sem Rev-2019 Subjects Code Sem Remark
EEC401 Applied Mathematics IV IV Engineering Mathematics IV EEC401 IV Equivalence
EEC402 Power Systems - I IV Electrical Power Systems I EEC304 III Equivalence
EEC403 Electrical Machines II IV Special Electrical Machine EEDO6011 VI Alternate
EEC404 Electromagnetic Fields And Waves IV Electromagnetic Fields And Waves EEC504 V Equivalence
EEC405 Analog And Digital Integrated Circuits IV Digital Electronics EEC403 IV Alternate
EEC406 Electrical Network IV Electric Circuit Analysis EEC302 III Equivalence

Page 13

11


Rev-2016 Sem. III Electrical Engineering Subject Equivalence
Code Rev-2016 CBCGS Subjects Sem Rev-2019 Subjects Code Sem Remark
EEC301 Applied Mathematics III III Engineering Mathematics III EEC301 III Equivalence
EEC302 Electronics Devices And Circuits III Analog Electronics EEC305 III Equivalence
EEC303 Conventional And Non -Conventional
Power Generation III Energy Storage EEDO6014 VI Alternate
EEC304 Electrical And Electronics
Measurements III Advanced Measurements and
Instrumentation EEDO5013 V Alternate
EEC305 Electrical Machines I III Fundamentals of Electrical Machines &
Measurements EEC303 III Alternate

Page 14

12
PRODUCTION ENGINEERING
Equivalence of Rev 2016 syllabus scheme to Rev 2019 scheme
Rev 2016 Equivalence from Rev 2019
Course
code Course Name Sem Course
code Course Name Sem
PEC301 Applied Mathematics – III** III PEC301 Engineering Mathematics III III
PEC302 Applied Thermodynamics III MEC305 Thermodynamics (Mech anical Engg) III
PEC303 Manufacturing Engineering -I III PEC304 Manufacturing Processes III
PEC304 Material Science and Engineering III PEC305 Engineering Materials and Metallurgy III
PEC305 Mechanics of Solids III PEC303 Mechanics of Materials III

PEC401 Applied Mathematics – IV** IV PEC401 Engineering Mathematics IV IV
PEC402 Dynamics of Machines IV PEC403 Theory of Machines IV
PEC403 Manufacturing Engineering -II IV PEC405 Advanced Manufacturing Processes IV
PEC404 Fluid & Thermal Engineering IV MEC402 Fluid Mechanics (Mech anical Engg) IV
PEC405 Electrical & Electronics Engineering IV PEC404 Applied Electrical and Electronics. IV

PEC501 Design of Mold & Metal Forming Tools V PEC402 Mould and Metal Forming Technology IV
PEC502 Operations Research V PEC604 Operation Research VI
PEC503 Machine Design -I V PEC502 Machine Design – I V
PEC504 CAD/CAM/CIM V PEC802 Computer Aided Engineering VIII
PEC505 Metrology & Quality Engineering V PEC504 Metrology & Quality Engineering V
PEDLO5011 Internal Combustion Engines V PEDO6011 Internal Combustion Engine VI
PEDLO5012 Finite Element Analysis V MEC504 Finite Element Analysis (Mech anical Engg) V
PEDLO5013 Plastic Engineering V PEDO5012 Plastic Engineering V
PEDLO5014 Micro and Nano Manufacturing V PEC405 Advanced Manufacturing Processes IV
PEDLO5015 Sustainable Manufacturing V PEDO5014 Sustainable Manufacturing V

PEC601 Machining Science and Technology VI PEC503 Machining Science and Technology V
PEC602 Process Engineering and Tooling VI PEC601 Process Engineering VI
PEC603 Production Tooling VI PEC501 Production Tooling V
PEC604 Machine Design – II VI PEC602 Machine Design – II VI

Page 15

13
PEC605 Production and Operation Management VI PEC603 Industrial Engineering VI
PEDLO6011 Manufacturing Planning and Control VI MEC801 Operations Planning and Control (Mech anical Engg) VIII
PEDLO6012 Refrigeration and Air Conditioning VI PEDO6012 Refrigeration & Air Conditioning VI
PEDLO6013 Reliability Engineering VI PEDO6015 Maintenance Engineering VI
PEDLO6014 Industrial Robotics VI PEDO5013 Industrial Robotics V
PEDLO6015 Rapid Prototyping and Manufacturing
VI PEDO6013 Rapid prototyping & Manufacturing VI

PEC701 Industrial Training & Project VII PEC701 Industrial Training & Project VII

PEC801 Fluid Power & Automation VIII PEC801 Automation & Control Engineering VIII
PEC802 Industrial Engineering and Human Resource
Management VIII PEC603 Industrial Engineering VI
PEC803 Economics, Finance, Accounting & Costing VIII PEC804 Engineering Economics, Finance, Costing and Accounting VIII
PEDLO8011 Product Design and Industrial Marketing VIII PEDO8012 Product Design and Industrial Marketing VIII
PEDLO8012 World Class Manufacturing VIII PEDO8013 World Class Manufacturing VIII
PEDLO8013 Logistics and Supply Chain Management VIII PEDO6014 Logistics and Supply Chain Management VI
PEDLO8014 Plant Engineering VIII PEDO8014 Plant Engineering VIII
PEDLO8015 Process Control and Instrumentation VIII ISC504 Process Instrumentation System (Instrumentation Engg.) V


Page 16

14
ELECTRONICS AND TELECOMMUNICATION ENGINEERING
Equivalent Subjects for SEM III (Rev -2016 to Rev -2019)
Semester III
Scheme R_2016 CBSGS Course Code Sem Scheme R_2019 C Scheme Course Code Sem Branch
Applied Mathematics - III ECC301 III Engineering Mathematics -III ECC301 III EXTC
Electronic Devices and Circuits I ECC302 III Electronic Devices & Circuits ECC302 III EXTC
Digital System Design ECC303 III Digital System Design ECC303 III EXTC
Circuit Theory and Networks ECC304 III Network Theory ECC304 III EXTC
Electronic Instrumentation and Control ECC305 III Electronic Instrumentation & Control Systems ECC305 III EXTC

Electronics and Telecommunication Engineering
Equivalent Subjects for SEM IV (Rev -2016 to Rev -2019)
Semester IV
Scheme R_2016 CBSGS Course Code Sem Scheme R_2019 C Scheme Course Code Sem Branch
Applied Mathematics - IV ECC401 IV Engineering Mathematics -IV ECC401 IV EXTC
Electronic Devices and Circuits II ECC402 IV Electronic Devices & Circuits ECC302 III EXTC
Linear Integrated Circuits ECC403 IV Linear Integrated Circuits ECC403 IV EXTC
Signals & Systems ECC404 IV Signals & Systems ECC404 IV EXTC
Principles of Communication Engineering ECC405 IV Principles of Communication Engineering ECC405 IV EXTC

Electronics and Telecommunication Engineering
Equivalent Subjects for SEM V (Rev -2016 to Rev -2019)
Semester V
Scheme R_2016 CBSGS Course Code Sem Scheme R_2019 C Scheme Course Code Sem Branch
Microprocessor & Peripherals Interfacing ECC501 V Microcontrollers ECC402 IV EXTC
Digital Communication ECC502 V Digital Communication ECC501 V EXTC
Electromagnetic Engineering ECC503 V Electromagnetics and Antenna ECC601 VI EXTC
Discrete Time Signal Processing ECC504 V Discrete Time Signal Processing ECC502 V EXTC
Department Level Optional Course
Microelectronics ECCDLO 5011 V Digital VLSI ECC603 VI EXTC
TV & Video Engineering ECCDLO 5012 V Digital and IPTV Engineering ECCDLO5011 V EXTC

Page 17

15
Finite Automata Theory ECCDLO 5013 V Digital System Design ECC303 III EXTC
Data Compression and Encryption ECCDLO 5014 V Data Compression and Cryptography ECCDLO5012 V EXTC

Electronics and Telecommunication Engineering
Equivalent Subjects for SEM VI (Rev -2016 to Rev -2019)
Semester VI
Scheme R_2016 CBSGS Course Code Scheme R0 2019 C Scheme Course Code Sem. Branch
Microcontrollers & Applications ECC601 Microcontrollers ECC402 IV EXTC
Computer Communication Networks ECC602 Computer Communication Networks ECC602 VI EXTC
Antenna & Radio Wave Propagation ECC603 Electromagnetics and Antenna ECC601 VI EXTC
Image Processing and Machine Vision ECC604 Image Processing and Machine Vision ECC603 VI EXTC
Department Level Optional Course
Digital VLSI Design ECCDLO 6021 Digital VLSI ECC503 V EXTC
Radar Engineering ECCDLO 6022 Radar Engineering ECCDLO6016 VI EXTC
Database Management System ECCDLO 6023 Database Management System ECCDLO6014 VI EXTC
Audio Processing ECCDLO 6024 Discrete Time Signal Processing ECC502 V EXTC

Electronics and Telecommunication Engineering
Equivalent Subjects for SEM VII (Rev -2016 to Rev -2019)
Semester VII
Scheme R_2016 CBSGS Course Code Sem. Scheme R_2019 C Scheme Course Code Sem Branch
Microwave Engineering ECC701 VII Microwave Engineering ECC701 VII EXTC
Mobile Communication System ECC702 VII Mobile Communication System ECC702 VII EXTC
Optical Communication ECC703 VII Optical Communication and Networks ECC801 VIII EXTC
Department Level Optional Course
Neural Networks and Fuzzy Logic ECCDLO7031 VII Artificial Neural Network and Fuzzy Logic ECC604 VI EXTC
Big Data Analytics ECCDLO7032 VII Big Data Analytics ECCDLO 7014 VII EXTC
Internet Communication Engineering ECCDLO7033 VII Internet Communication Engineering ECCDLO 7023 VII EXTC
CMOS Mixed Signal VLSI ECCDLO7034 VII Mixed Signal VLSI ECCDLO 7023 VI EXTC
Embedded System ECCDLO7035 VII Microcontrollers ECC402 IV EXTC

Page 18

16
Institute Level Elective
Product Lifecycle Management LO7011 VII Product Lifecycle Management ECCILO 7011 VII EXTC
Reliability Engineering LO7012 VII Reliability Engineering ECCILO 7012 VII EXTC
Management Information System LO7013 VII Management Information System ECCILO 7013 VII EXTC
Design of Experiments LO7014 VII Design of Experiments ECCILO 7014 VII EXTC
Operation Research LO7015 VII Operation Research ECCILO 7015 VII EXTC
Cyber Security and Laws LO7016 VII Cyber Security and Laws ECCILO 7016 VII EXTC
Disaster Management and Mitigation
Measures LO7017 VII Disaster Management and Mitigation
Measures ECCILO 7017 VII EXTC
Energy Audit and Management LO7018 VII Energy Audit and Management ECCILO 7018 VII EXTC
Development Engineering LO7019 VII Development Engineering ECCILO 7019 VII EXTC

Bachelor of Electronics and Telecommunication Engineering
Equivalent Subjects for SEM VIII(Rev -2016 to Rev -2019)
Semester VIII
Scheme R_2016 CBSGS Course Code Sem Scheme R_2019 C Scheme Course Code Sem Branch
RF Design ECC801 VIII RF Design ECCDLO 8015 VIII EXTC
Wireless Networks ECC802 VIII Wireless Networks ECCDLO 8013 VIII EXTC
RF Design Lab ECL801 VIII Microwave Engineering Laboratory ECL701 VII EXTC
Wireless Networks Lab ECL802 VIII Mobile Communication System Laboratory ECL702 VII EXTC
Department Level Optional Lab IV ECLDLO 804X VIII Optical Communication and Networks
Laboratory ECL801 VIII EXTC
Department Level Optional Course
Optical Networks ECCDLO8041 VIII Optical Communication and Networks ECC801 VIII EXTC
Advanced Digital Signal Processing ECCDLO8042 VIII Advanced Digital Signal Processing ECCDLO 7024 VII EXTC
Satellite Communication ECCDLO8043 VIII Satellite and Nano Satellite
Communication ECCDLO 8022 VIII EXTC
Network management in Telecommunication ECCDLO8044 VIII Network Management in Telecommunication ECCDLO 8023 VIII EXTC

Page 19

17
Institute Level Elective Course
Project Management ILO8021 VIII Project Management ECCILO 8011 VIII EXTC
Finance Management ILO8022 VIII Finance Management ECCILO 8012 VIII EXTC
Entrepreneurship Development and
Management ILO8023 VIII Entrepreneurship Development and
Management ECCILO 8013 VIII EXTC
Human Resource Management ILO8024 VIII Human Resource Management ECCILO 8014 VIII EXTC
Professional Ethics and CSR ILO8025 VIII Professional Ethics and CSR ECCILO 8015 VIII EXTC
Research Methodology ILO8026 VIII Research Methodology ECCILO 8016 VIII EXTC
IPR and Patenting ILO8027 VIII IPR and Patenting ECCILO 8017 VIII EXTC
Digital Business Management ILO8028 VIII Digital Business Management ECCILO 8018 VIII EXTC
Environmental Management ILO8029 VIII Environmental Management ECCILO 8019 VIII EXTC













Page 20

18
ELECTRONICS ENGINEERING
Equivalent Subjects for SEM III (Rev -2016 to Rev -2019)
REV - 2016 syllabus Courses: Equivalent in REV - 2019 ‘C’ Scheme
Sem. Course Code Course Name
Course Code Course Name
Sem.
3 ELX301 Applied Mathematics III ELC301 Engineering Mathematics III 3
3 ELX302 Electronic Devices and Circuits I ELC302 Electronic Devices and Circuits I 3
3 ELX303 Digital Circuit Design ELC303 Digital Logic Circuits 3
3 ELX304 Electrical Network Analysis and Synthesis ELC304 Electrical Network Analysis and Synthesis 3
3 ELX305 Electronics Instruments and Measurement ELC305 Electronics Instruments and Measurement 3
4 ELX401 Applied Mathematics IV ELC401 Engineerin g Mathematics IV 4
4 ELX402 Electronic Devices and Circuits II ELC402 Electronic Devices and Circuits II 4
4 ELX 403 Microprocessors and Applications ELC403 Microcontroller Applications 4
4 ELX 404 Digital System Design ELDO 601 -4 Digital Design with Reconfigurable Architecture 6
4 ELX 405 Principles of Communication Engineering ELC404 Analog Communication 4
4 ELX 406 Linear Control Systems ELC501 Principles of Control System 5
5 ELX501 Micro -controllers and Applications ELC403 Microcontroller Applications 4
5 ELX 502 Digital Communication ELC504 Digital Communication 5
5 ELX 503 Engineering Electromagnetics ELC602 Electromagnetic Engineering 6
5 ELX 504 Design with Linear Integrated Circuits ELC503 Linear Integrated Circuits 5
Depar tment Level optional courses I
5 ELXDLO5011 Data Base and Management System ELDO702 -4 Department Level Optional Course –IV:
Data Science and applications 7
5 ELXDLO5012 Digital Control system ELDO 601 -1 Department Level Optional Couse - II: Digital
Control System 6
5 ELXDLO5013 ASIC Verification ELDO802 -3 Department Level Optio nal Course -VI: System on
Chip 8
5 ELXDLO5014 Biomedical Instrumentation ELDO 501 -2 Department Level Optional Couse - I : Biomedical
Instrumentation 5
6 ELX601 Embedded System and RTOS ELC604 Embedded Systems and Real Time Operating
Systems 6
6 ELX602 Computer Communication Network ELC603 Computer Communication Networks 6
6 ELX 603 VLSI Design ELC601 Basic VLSI Design 6
6 ELX 604 Signals and systems ELC405 Signals and Systems 4
Department Level optio nal courses II

Page 21

19
6 ELXDLO6021 Microwave Engineering ELDO702 -1 Department Level Optional Course –IV: Wireless
Communication 7
6 ELXDLO6022 Electronics Product Design ELDO 801 -1 Department Level Optional Course -II: Web
Design 8
6 ELXDLO6023 Wireless Communication ELDO702 -1 Department Level Optional Course –IV: Wireless
Communication 7
6 ELXDLO6024 Computer Organization and Architecture ELDO 501 -4 Department Level Optional Couse - I : Computer
Organization Architecture 5
7 ELX701 Instrumentation System Design ELC801 Industrial Automation 8
7 ELX702 Power Electronics ELC701 Power Electronics 8
7 ELX703 Digital signal processing ELC502 Digital Signal Processing 5
Department Level optional courses III


7 ELXDLO7031 Neural Network and Fuzzy Logic ELDO 501-3 Depa rtment Level Optional Couse - I: Neural
Network and Fuzzy Logic 5
7 ELXDLO7032 Advance Networking Technologies ELDO701 -4 Depart ment Level Optional Course –III: Advanced
Networking Technologies 7
7 ELXDLO7033 Robotics ELDO702 -3 Depar tment Level Optional Course -IV: Robotics 7
7 ELXDLO7034 Integrated Circuit Technology ELDO802 -4 Depar tment Level Optional Course –VI: Integrated
Circuit Technology 8
8 ELX801 Internet of Things ELC702 Internet of Things 7
8 ELX 802 Analog and Mixed VLSI Design ELDO701 -1 Depart ment Level Optional Course –III:
Mixed Signal VLSI Design 7
8 Depar tment Level optional courses IV
8 ELXDLO8041 Advanced Power Electronics ELDO801 -3 Department Level Optional Course –V: Advanced
Power Electronics 8
8 ELXDLO8042 MEMS Technology ELDO801 -1 Department Level Optional Course –V:
Microelectromechanical Systems (MEMS 8
8 ELXDLO8043 Virtual Instrumentation ELDO801 -4 Department Level Optional Course –V: Virtual
Instrumentation 8
8 ELXDLO8044 Digital Image Processing ELDO 601 -2 Department Level Optional Couse – II: Digital
Image Processing and Machine Vision 6


Page 22

20
INFORMATION TECHNOLOGY
Equivalence of Rev -2016 Scheme to Rev 2019 Scheme
Sr.
No. Rev-2016 Scheme Rev-2019 ‘C’ Scheme
Course Code Sem Course Name Course Code Sem Course Name
SEM -III
1 ITC301 III Applied Mathematics III ITC301 III Engineering Mathematics -III
2 ITC302 III Logic Design ITC405 IV Computer Organization and Architecture
3 ITC303 III Data Structures & Analysis ITC302 III Data Structure and Analysis
4 ITC304 III Database Management System ITC303 III Database Management System
5 ITC305 III Principle of Communications ITC304 III Principle of Communication
6 ITL301 III Digital Design Lab ITL403 IV Microprocessor Lab
7 ITL302 III Data Structures Lab ITL301 III Data Structure Lab
8 ITL303 III SQL Lab ITL302 III SQL Lab
9 ITL304 III Java Programming Lab ITL304 III Java Lab (SBL)
SEM -IV
10 ITC401 IV Applied Mathematics -IV ITC401 IV Engineering Mathematics -IV
11 ITC402 IV Computer Networks ITC402 IV Computer Network and Network Design
12 ITC403 IV Operating Systems ITC403 IV Operating System
13 ITC404 IV Computer Organization and
Architecture ITC405 IV Computer Organization and Architecture
14 ITC405 IV Automata Theory ITC404 IV Automata Theor y
15 ITL401 IV Networking Lab ITL401 IV Network Lab
16 ITL402 IV Unix Lab ITL402 IV Unix Lab
17 ITL403 IV Microprocessor Programming Lab ITL403 IV Microprocessor Lab
18 ITL404 IV Python Lab ITL404 IV Python Lab (SBL)
SEM -V
19 ITC501 V Microcontroller and Embedded
Programming ITDO5011 V Microcontroller Embedded Programming
20 ITC502 V Internet Programming ITC501 V Internet Programming
21 ITC503 V Advanced Data Management
Technology ITDO5012 V Advance Data Management Technologies
22 ITC504 V Cryptography & Network Security ITC502 V Computer Network Security
23 ITL501 V Internet Programming Lab ITL501 V IP Lab
24 ITL502 V Security Lab ITL502 V Security Lab

Page 23

21
25 ITL503 V OLAP Lab ITL601 VI Business Intelligence Lab
26 ITL504 V IOT (Mini Project) Lab ITL702 VII IOE Lab
27 ITL505 V Business Communication and Ethics ITL505 V Professional Communication & Ethics -II (PCE -
II)
28 ITDLO5011 V Advanced Data Structures & Analysis
of Algorithms ITDO5014 V Advanced Data structure and Analysis

29 ITDLO5012 V Image Processing ITDO6012 VI Image Processing
30 ITDLO5013 V E-Commerce & E -Business ITC503 V Entrepreneurship and E - business
31 ITDLO5014 V IT Enabled Services ITDO6013 VI Green IT
32 ITDLO5015 V Computer Graphics & Virtual Reality ITDO5013 V Computer Graphics & Multimedia System
SEM -VI
33 ITC601 VI Software Engineering with Project
Management ITC504 V Software Engineering
34 ITC602 VI Data Mining and Business
Intelligence ITC601 VI Data Mining &
Business Intelligence
35 ITC603 VI Cloud Computing & Services ITDO8024 VIII Cloud computing and Services
36 ITC604 VI Wireless Networks ITC603 VI Wireless Technology
37 ITL601 VI Software Design Lab ITL503 V DevOPs Lab
38 ITL602 VI Business Intelligence Lab ITL601 VI BI Lab
39 ITL603 VI Cloud Service Design Lab ITL802 VIII Cloud computing
40 ITL604 VI Sensor Network Lab ITL603 VI Sensor Lab
41 ITM605 VI Mini -project ITM601 VI Mini Project – 2 B Based on ML
42 ITDLO6021 VI Advance Internet Programming ITC602 VI Web X.0
43 ITDLO6022 VI Software Architecture ITDO6011 Software Architecture
44 ITDLO6023 VI Digital Forensics ITDO6014 Ethical Hacking and Forensic
45 ITDLO6024 VI Multimedia Systems ITDO5013 V Computer Graphics & Multimedia System
46 ITDLO6025 VI Green IT ITDO6013 VI Green IT
SEM -VII
47 ITC701 VII Enterprise Network Design ITC502 V Computer Network Security
48 ITC702 VII Infrastructure Security ITDO7013 VII Infrastructure Security
49 ITC703 VII Artificial Intelligence ITC604 VI AI and DS – 1
50 ITL701 VII Network Design Lab ITL502 V Security Lab
51 ITL702 VII Advanced Security Lab ITL502 V Security Lab

Page 24

22
52 ITL703 VII Intelligence System Lab ITL605 VI DS using Python Skill based Lab
53 ITL704 VII Android Apps Development Lab ITL604 VI MAD & PWA Lab
54 ITM705 VII Project -I ITP701 VII Major Project I
55 ITDLO7031 VII Storage Area Networks ITDO7011 VII Storage Area Network
56 ITDLO7032 VII Mobile Application Development ITDO7021 VII MANET
57 ITDLO7033 VII High Performance Computing ITDO7012 VII High Performance computing
58 ITDLO7034 VII Software Testing and Quality
Assurance ITDO7014 VII Software Testing and QA
59 ITDLO7035 Soft Computing ITDO7023 VII Quantum Computing
60 ITC801 VIII Big Data Analytics ITDO8011 VIII Big Data Analytics
61 ITC802 VIII Internet of Everything ITC702 VII Internet of Everything
62 ITL803 VIII DevOps Lab ITL503 V DevOPs Lab
63 ITL804 VIII R Programming Lab ITL601 VI Business Intelligence Lab
64 ITL805 VIII Project -II ITP801 VIII Major Project II
65 ITDLO8041 VIII User Interaction Design ITDO8021 VIII User Interface Design
66 ITDLO8042 VIII Information Retrieval Systems ITDO7024 VII Information Retrieval System
67 ITDLO8043 VIII Knowledge Management ITDO8014 VIII Knowledge management
68 ITDLO8044 VIII Robotics ITDO8022 VIII Robotics
69 ITDLO8045 VIII Enterprise Resource Planning ITDO8023 VIII ERP

Page 25

23
AUTOMOBILE ENGINEERING
Equivalent Subjects (Rev -2016 to Rev 2019)

Sr No Scheme R 2016 CBCGS Scheme R 2019 CBCS

Subject code Subject Name Subject code Subject Name Sem
Sem VIII

AEC801 Vehicle Maintenance AEL701 Vehicle Maintenance Lab 7

AEC802 Vehicle Dynamics AEC702 Vehicle dynamics 7

AEC803 Vehicle Safety AEC603 Vehicle Body Engineering and Safety 6

AEDLO8041 Hybrid Electric and Fuel cell Vehicles AEC801 Hybrid and Electric Vehicles 8

AEDLO8042 Rapid Prototyping AEDLO8061 Product Design and Development 8

AEDLO8043 Product Design and Development AEDLO8061 Product Design and Development 8

AEDLO8044 Transport Management and Motor Industry AEDLO7041 Transport Management Systems 7
Sem VII

AEC701 Automotive Design AEC 601 Automotive Systems & Design 6

AEC702 CAD/CAM/CAE AEC 404 CAD/CAM/ 4

AEC702 Autotronics AEC 701 Autotronics 7

AEDLO7031 Automotive NVH PEDLO8014 Plant Engineering (Plant Engineering) 8

AEDLO7032 Automotive Embedded Systems AEDLO8052 Automotive Embedded Systems 8

Page 26

24

AEDLO7033 Automotive Aerodynamics and Aesthetics AEDLO7033 Automotive Aerodynamics and Aesthetics 7

AEDLO7034 Computational Fluid Dynamics AEDLO7033 Automotive Aerodynamics and Aesthetics 7
Sem VI

AEC601 Chassis and Body Engineering AEC603 Vehicle Body Engineering and Safety 6

AEC602 Machine Design AEC503 Machine Design 5

AEC603 Finite Element Analysis AEC504 Finite Element Analysis 5

AEC604 Mechanical Vibrations AEC602 Mechanical Vibrations 6

AEDLO6021 Mechatronics AEC604 Automation and AI 6

AEDLO6022 Robotics AEC604 Automation and AI 6

AEDLO6023 Automotive Materials AEDLO8051 Automotive Materials 8
Sem V

AEC501 Internal Combustion Engines AEC502 Internal Combustion Engines 5

AEC502 Mechanical Measurements and Control AEC501 Mechanical Measurements and Control 5

AEC503 Heat Transfer AEDLO7043 Automotive Sensors and Control Systems

AEC504 Automotive Systems AEC 601 Automotive Systems & Design 6

AEDLO5011 Press Tool Design AEDLO6021 Press Tool Design 6

AEDLO5012 Machining Sciences and Tool Design AEDLO6022 Tool Engineering 6

AEDLO5013 Design of Jigs and Fixtures MEDLO8063 Total Quality Management 8
Sem IV

Page 27

25

AEC401 Applied Mathematics IV AEC404 Applied Mathematics IV 4

AEC402 Fluid Mechanics AEC402 Fluid Mechanics 4

AEC403 Industrial Electronics AEC 405 Industrial Electronics 4

AEC404 Production Process II AEC 303 Production Processes 3

AEC405 Kinematics of Machinery AEC403 Kinematics of Machinery 4
Sem III

AEC301 Applied Mathematics III AEC301 Applied Mathematics III 3

AEC302 Thermodynamics AEC 305 Thermodynamics 3

AEC303 Strength of Materials AEC302 Strength of Materials 3

AEC304 Production Process I AEC 303 Production Processes 3

AEC305 Material Technology AEC 304 Materials and Metallurgy 3

Page 28

26
MECHATRONICS ENGINEERING
Equivalent Subjects (Rev -2012 to Rev 2019)
Sr No Scheme R 20 12 CBCGS Scheme R 2019 CBCS
Subject
code Subject Name Subject code Subject Name Sem
Sem VIII
MTC801 Design of Mechatronic Systems MTC702 Design of Mechatronic Systems VII
MTC802 Engineering Management & Economics MTDLO8063 Engineering Management & Economics VIII
MTC803 Modelling & Simulation MTC503 Mechatronic Systems Modelling And Control V
MTE8044 Robotics & Machine Vision MTDLO8061 Robotics & Machine Vision VIII
Sem VII
MTC701 CAD/CAM/CAE MTC501 CAD/CAE V
MTC702 Manufacturing Planning & Control ILO7015 Operation Research VII
MTC703 Communication Systems MTDLO8052 Communications Systems VIII
MTC704 Automotive Electronics MTC701 Automotive Mechatronics VII
MTE7052 Neural Networks and Fuzzy Logic MTDLO7.032 Neural Networks and Fuzzy Logic VII
MTE7053 Micro Electro Mechanical System MTC7043
Micro Electro Mechanical System VII

Page 29

27
Sem VI
MTC601 CNC technology MTC601 Digital Manufacturing VI
MTC602 Metrology and Quality Engineering MTDLO7041 Product Design and Development
MTC603 Dynamics of Machinery MTDLO8062 UAV Systems
MTC604 Power Electronics and Drive MTC602 Power Electronics and Drive VI
MTC605 Instrumentation and Control MTC603 Instrumentation and Control VI
MTC606 Applied Hydraulics & Pneumatic MTC604 Applied Hydraulics & Pneumatic VI
Sem V
MTC501 Manufacturing Processes MTDO504.2 Production Processes V
MTC502 Machine Design MTC501 CAD and CAE V
MTC503 Sensors & Actuators MTC502 Sensors & Actuators V
MTC504 Control Systems MTC503 Mechatronic Systems Modeling & Control V
MTC505 Embedded Systems MTC504 Embedded Systems V
MTC506 Operating Systems MTDO501.3 Operating Systems V
MTC507 Business Communications & Ethics MTL504 Professional Communications & Ethics V
Sem IV
MTC401 Applied Mathematics -IV MTC401 Engineering Mathematics - IV IV
MTC402 Kinematics of Machinery MTC402 Kinematics of Machinery IV
MTC403 Fluid Mechanics & Machinery MTC403 Thermal and Fluid Engineering IV

Page 30

28
MTC404 Strength of Materials MTC404 Strength of Materials IV
MTC405 Applications of Integrated Circuits MTC405 Applications of Integrated Circuits IV
MTC406 Signals & Systems MTDO501.1 Signal & Systems V

Sem III
MTC301 Applied Mathematics -III MTC301 Engineering Mathematics -III III
MTC302 Thermodynamics & Heat Transfer MTC403 Thermal and Fluid Engineering IV
MTC303 Engineering Materials and Metallurgy MTC303 Engineering Materials and Metallurgy III
MTC304 Digital Electronics MTC304 Basic Electronics & Digital Circuit Design III
MTC305 Applied Electrical & Electronics Engineering MTC305 Electrical Circuits and Machines III

Page 31

29

BIOMEDICAL ENGINEERING
Sem III to Sem VIII R2016 to R2019 equivalence
SEM Course
Code R2016 Course Code R2019
III BMC301 Applied Mathematics III BMC301 Engineering Mathematics - III
BMC302 Basics of Human Physiology BMC302 Human Anatomy and Physiology for Engineers
BMC303 Electrical Network Analysis and Synthesis ECC304 Network Theory - III (EXTC)
BMC304 Electronic Circuit Analysis and Design BMC304 Electronic Circuit Analysis and Design
BMC305 Biomaterials, Prosthetics and Orthotics BMC405 Biomaterials and Artificial Organs

IV BMC401 Applied Mathematics IV BMC401 Engineering Mathematics - IV
BMC402 Biomedical Transducers and Measuring Instruments BMC303 Medical Sensors
BMC403 Linear Integrated Circuits BMC402 Integrated Circuit Design
BMC404 Digital Electronics BMC305 Digital Electronics
BMC405 Signals and Control Systems BMC403 Principles of Control Systems

V BMC501 Diagnostic & Therapeutic Instruments BMC501 Biomedical Instrumentation – I
BMC502 Analog and Digital Circuit Design
BMC402 Integrated Circuit Design
BMC503 Principles of Communication Engineering BMDO5011 Principles of Communication Engineering
BMC504 Biomedical Digital Signal Processing BMC502 Digital Signal Processing
Department Level Optional Course – I
BMDO5011 Healthcare Database Management BMC603 Data Analysis in Healthcare
BMDO5012 Biostatistics BMC603 Data Analysis in Health Care

Page 32

30
BMDO5013 Rehabilitation Engineering BMDO7021 Rehabilitation Engineering

VI BMC601 Biomedical Monitoring Equipment BMC601 Biomedical Instrumentation – II
BMC602 Microprocessors and Microcontrollers BMC503 Microcontrollers and Embedded Systems
BMC603 Digital Image Processing BMC602 Biomedical Digital Image Processing
BMC604 Medical Imaging -I BMC404 Medical Imaging – I
Department level Optional Course - II
BMDO6021 Healthcare Software BMDO8012 Healthcare Informatics
BMDO6022 Lasers and Fibre Optics BMDO7022 Lasers and Fibre Optics
BMDO6023 Biological Modelling and Simulation BMDO7011 Biological Modeling and Simulation

VII BMC701 Life saving and surgical Equipment BMC701 Biomedical Instrumentation – III
BMC702 Basics of VLSI BMDO5012 Very Large Scale Integration
BMC703 Medical Imaging -II BMC504 Medical Imaging – II
Department level Optional Course – III
BMDO7031 Networking and Information in Medical System BMDO7023 Networking and Information Systems in Medicine
BMDO7032 Advanced Image Processing BMC504 Medical Imaging – II
BMDO7033 Embedded Systems BMDO6012 Advanced Embedded Systems

VIII BMC801 Biomedical Microsystems BMDO8021 Biomedical Microsystems
BMC802 Hospital Management BMC801 Hospital Management
Department Level Optional Course – IV
BMDO8041 Health Care Informatics BMDO8012 Health Care Informatics
BMDO8042 Robotics in Medicine BMDO8011 Robotics in Medicine
BMDO8043 Nuclear Medicine BMDO6011 Nuclear Medicine

Page 33

31
INSTRUMENTATION ENGINEERING
Equivalence of Rev 2016 syllabus to Rev- 2019 ‘C’ Scheme
Sem/
year Rev-2016 R-2019 (C -scheme)
Subject code Subject name Subject code Subject name
S.E.
III ISC301 Applied Mathematics –III ISC301 Engineering Mathematics -III
ISC302 Analog Electronics ISC303 Analog Electronics
ISC303 Transducers – I ISC302 Transducers -I
ISC304 Digital Electronics ISC304 Digital Electronics
ISC305 Electrical Networks and Measurement ISC305 Electrical Networks and Measurements
SE.
IV ISC401 Applied Mathematics –IV ISC401 Engineering Mathematics -IV
ISC402 Transducer – II ISC402 Transducers -II
ISC403 Feedback Control System ISC404 Feedback Control System
ISC404 Analytical Instrumentation ISDOC5011 Analytical Instrumentation
ISC405 Signal Conditioning Circuit Design ISC403 Signal Conditioning and Circuit Design
TE -
V ISC501 Signals and Systems ISC403 Signal Conditioning and Circuit Design
ISC502 Applications of Microcontroller ISC502 Applications of Microcontroller
ISC503 Control System Design ISC503 Control System Design
ISC504 Control System Components ISC405 Control System Components
ISDLO5011 Advanced Sensors ISDOC5014 Advanced Sensors
ISDLO5012 Optimization Techniques ISDOC6012 Optimization Techniques
ISDL05013 Database Management System ISDOC6013 Database Management Systems

Page 34

32
ISDLO5014 Fiber Optic Instrumentation
TE-
VI ISC 601 Process Instrumentation System ISC504 Process Instrumentation System
ISC602 Industrial Data Communication ISC603 Industrial Data Communication
ISC603 Electrical Machines and Drives ISC501 Electrical Machines and Drives
ISC604 Digital Signal Processing ISC602 Digital Signal Processing
ISC605 Advanced Control System ISDOC 7013 Advanced Control System
ISDLO6021 Material Science PEDO8012 Product Design and Industrial Marketing (Production Engg)
ISDL06022 Computer Organization and Architecture ISC502 Applications of Microcontroller
ISDLO6023 Bio-Sensors and Signal Processing ISDOC6014 Biosensors and Signal Processing
ISDL06024 Nuclear Instrumentation ISDOC5011 Analytical Instrumentation
BE-
VII ISC701 Industrial Process Control ISC601 Industrial Process Control
ISC702 Biomedical Instrumentation ISDOC 8015 Advanced Biomedical Instrumentation
ISC703 Industrial Automation ISC702 Process Automation
ISDLO7031 Image Processing ISDOC 8013 Digital Image Processing
ISDLO7032 Digital Control System ISDOC 8011 Digital Control System
ISDLO7033 Advanced Microcontroller Systems ISDOC 7014 Advanced Microcontroller
ISDLO 7034 Mechatronics ISDOC5013 Mechatronics
ISDLO 7035 Building Automation ISDOC8022 Building Automation
ILO7011 Product Lifecycle Management IOC7011 Product Lifecycle Management
ILO7012 Reliability Engineering IOC7012 Reliability Engineering
ILO7014 Design of Experiments IOC7014 Design of Experiments

Page 35

33
ILO7013 Management Information System IOC7013 Management Information System
ILO7015 Operation Research IOC7015 Operation Research
ILO7016 Cyber Security and Laws IOC7016 Cyber Security and Laws
ILO7017 Disaster Management and Mitigation Measures IOC7017 Disaster Management and Mitigation Measures
ILO7018 Energy Audit and Management IOC7018 Energy Audit and Management
ILO7019 Development Engineering IOC7019 Development Engineering
BE
VIII ISC801 Instrumentation Project Documentation and
Execution ISC701 Instrumentation Project Documentation & Execution
ISC802 Instrument and System design ISC801 Instrument and System Design
ISDLO8041 Expert System
ISDOC8012 Expert System
ISDLO8042 Optimal Control System ISDOC 8025 Optimal Control System
ISDLO8043 Internet of Things ISDOC8014 Internet of Things
ISDLO8045 Functional Safety ISDOC 8023 Functional Safety
ILO8021
Project Management IOC8022 Finance Management
ILO8022 Finance Management IOC8022 Finance Management
ILO8023 Entrepreneurship Development and IOC8023 Entrepreneurship Development and Management
ILO8024 Human Resource Management IOC8024 Human Resource Management
ILO8025 Professional Ethics and Corporate Social
Responsibility IOC8025 Professional Ethics and Corporate Social Responsibility
ILO8026 Research Methodology IOC8026 Research Methodology
ILO8027 IPR and Patenting IOC8027 IPR and Patenting

Page 36

34
ILO8028 Digital Business Management IOC8028 Digital Business Management
ILO8029 Environmental Management IOC8029 Environmental Management

Page 37

35
Computer Engineering

Equivalence of Rev 2016 syllabus to Rev- 2019 ‘C’ Scheme
Semester Rev 2016 Rev 2019

Sem: III Applied Mathematics -III Engineering Mathematics - III
Digital Logic Design and Analysis Digital Logic & Computer Architecture
Discrete Mathematics Discrete Structures and Graph Theory
Electronic Circuits and Communication Fundamentals CSC 304 Digital Logic & Computer Architecture
Data Structures Data Structure

Sem: IV Applied Mathematics - IV Applied Mathematics - IV
Analysis of Algorithms Analysis of Algorithms
Computer Organization and Architecture Digital Logic & Computer Architecture
Computer Graphics CSC305: Computer Graphics
Operating System CSC404: Operating System

Sem:V Microprocessor CSC405 Microprocessor
Database Management System CSC403 Database Management System
Computer Network CSC503 Computer Network
Theory of Computer Science CSC501 Theoretical Computer Science
• Multimedia System
• Advance Operating System
• Advance Algorithm • CSDLO5012: Internet Programming
• CSC404: Operating System
• CSDLO5011: Probabilistic Graphical Models

Sem: VI Software Engineering CSC502 Software Engineering
System Programming & Complier Construction CSC601 System Programming & Compiler Construction

Page 38

36
Data Warehousing &Mining CSC504 Data Warehousing & Mining
Cryptography & System Security CSC602 Cryptography & System Security
• Machine Learning
• Advance Database System
• Enterprise Resource Planning
• Advance Computer Network • CSC 701 : Machine Learning
• CSDLO5013: Adv. Database Management System
• ERP – (Information Technology)
• CSC503 Computer Network



Sem: VII Digital Signal & Image Processing CSDLO6012: Digital Signal & Image Processing
Mobile Communication & Computing CSC603 Mobile Computing
Artificial Intelligence & Soft Computing CSC604 Artificial Intelligence
• Adv. Security & Digital Forensics
• Big Data & Analytics
• Robotics • CSDC8012 : Digital Forensic
• CSC 702 Big Data Analytics
• Robotics – (Information Technology Branch)







ILO7011. Product Lifecycle Management
ILO7012. Reliability Engineering
ILO7013. Management Information System
ILO7014.Design of Experiments ILO7015Operation Research
ILO7016. Cyber Security and Laws
ILO7017. Disaster Management & Mitigation Measures
ILO7018. Energy Audit and Management
ILO7019. Development Engineering ILO7011. Product Lifecycle Management
ILO7012. Reliability Engineering
ILO7013. Management Information System
ILO7014. Design of Experiments
ILO7015. Operation Research
ILO7016. Cyber Security and Laws
ILO7017. Disaster Management & Mitigation Measures
ILO7018. Energy A udit and Management
ILO7019. Development Engineering

Sem: VIII Human Machine Interaction ARVR
Distributed Computing
Distributed Computing

Page 39

37
• Adv. System Security & Digital Forensics
• Big Data & Analytics
• Robotics • CSDC8012 : Digital Forensic
• CSDC 8013 : Applied Data Science
• Robotics – (Information Technology Branch)

ILO7011. Product Lifecycle Management
ILO7012. Reliability Engineering
ILO7013. Management Information System
ILO7014. Design of Experiments
ILO7015. Operation Research
ILO7016. Cyber Security and Laws
ILO7017. Disaster Management & Mitigation Measures
ILO7018. Energy Audit and Management
ILO7019. Development Engineering

ILO7011. Product Lifecycle Management
ILO7012. Reliability Engineering
ILO7013. Management Information Syste m
ILO7014. Design of Experiments
ILO7015. Operation Research
ILO7016. Cyber Security and Laws
ILO7017. Disaster Management & Mitigation
Measures
ILO7018. Energy Audit and Management
ILO7019. Development Engineering










Page 40

38

CHEMICAL ENGINEERING
Equivalence of Rev -2016 Scheme to Rev 2019 Scheme
Sr.
No. Rev-2016 Scheme Rev-2019 ‘C’ Scheme
Course Code Sem Course Name Course Code Sem Course Name
1 CHC301 III Applied Mathematics -III CHC301 III Engineering Mathematics -III
2 CHC302 III Engineering Chemistry I CHC302 III Industrial and Engineering Chemistry I
3 CHC303 III Fluid Flow Operations (FFO) CHC303 III Fluid Flow Operations
4 CHC304 III Chemical Engineering
Thermodynamics I CHC304 III Chemical Engineering Thermodynamics I
5 CHC305 III Process Calculations CHC305 III Process Calculations
6 CHC306 III Chemical Technology CHC304 III Chemical Engineering Thermodynamics I
7 CHL301 III Engineering Chemistry -I Lab CHL301 III Industrial and Engineering Chemistry I Lab
8 CHL302 III Chemical Engineering Lab I (FFO) CHL302 III Fluid Flow Operation Lab
9 CHL303 III Chemical Engineering Lab II (Synthesis
) CHL303 III Basic Chemical Engineering Lab
10 CHC401 IV Applied Mathematics -IV CHC401 IV Engineering Mathematics -IV
11 CHC402 IV Engineering Chemistry II CHC402 IV Industrial and Engineering Chemistry II
12 CHC403 IV Chemical Engineering
Thermodynamics II CHC405 IV Chemical Engineering Thermodynamics II
13 CHC404 IV Solid Fluid Mechanical Operations
(SFMO) CHC404 IV Solid Fluid Mechanical Operations
14 CHC405 IV Mechanical Equipment Design (MED) CHC503 V Chemical Reaction Engineering -
15 CHC406 IV Chemical Engineering Economics CHC604 VI Process Engineering and Economics
16 CHL401 IV Engineering Chemistry -II Lab CHL401 IV Industrial and Engineering Chemistry II Lab
17 CHL402 IV Chemical Engineering Lab III (SFMO) CHL403 Solid Fluid Mechanical Operation Lab
18 CHL403 IV MED Lab CHL404 IV Skilled based lab: Design Calculation of Auxiliary
Plant Equipment
19 CHC501 V Computer programming and
Numerical Methods CHC403 IV Numerical Method in Chemical Engineering
20 CHC502 V Mass transfer Operations -I (MTO - I) CHC501 V Mass transfer Operations -I
21 CHC503 V Heat transfer Operations (HTO) CHC502 V Heat transfer Operations

Page 41

39
22 CHC504 V Chemical Reaction Engineering -I (CRE
I) CHC503 V Chemical Reaction Engineering -I
23 CHC505 V Business Communication & Ethics CHL504 V Skilled Based Lab: Professional Communication
and Ethics II Lab
24 CHDE501X V Department Elective I
25 CHDE5011 V Piping Engineering CHDO6021 VI Piping Engineering
26 CHDE5012 V Colloids and Interfaces CHDO7032 VII Fundamental of Colloids and Interface Science
and Technology
27 CHDE5013 V Advanced Material Sciences CHDO5012 V Advanced Material Sciences
28 CHDE5014 V Instrumentation CHC402 IV Industrial and Engineering Chemistry II
29 CHL501 V Computer programming and
Numerical Methods Lab CHL402 IV Numerical Methods in Chemical Engineering lab
30 CHL502 V Chemical Engineering Lab IV (MTO -I) CHL501 V Mass transfer Operations -I Lab
31 CHL503 V Chemical Engineering Lab V (HTO) CHL502 V Heat transfer Operations Lab
32 CHL504 V Chemical Engineering Lab VI (CRE -I) CHL503 V Chemical Reaction Engineering -I Lab
33 CHC601 VI Environmental Engineering (EE) CHC603 VI Pollution Control Technology
34 CHC602 VI Mass transfer Operations –II (MTO -II) CHC601 VI Mass Transfer Operation II
35 CHC603 VI Transport Phenomenon CHC504 V Transport Phenomena
36 CHC604 VI Chemical Reaction Engineering –II
(CRE - II) CHC602 VI Chemical Reaction Engineering II
37 CHC605 VI Plant Engineering & Industrial Safety CHDO7041 VII Chemical Plant Safety and Hazards
38 CHDE602X VI Department Elective II
39 CHDE6021 VI Computational Fluid Dynamics CHC504 V Transport Phenomena
40 CHDE6022 VI Operation Research CHDO7043 VII Operation Research
41 CHDE6023 VI Biotechnology CHDO8062 VIII Biotechnology
42 CHL601 VI Chemical Engineering Lab VII (EE) CHL603 VI Pollution Control Technology Lab
43 CHL602 VI Chemical Engineering Lab VIII (MTO -
II) CHL601 VI Mass Transfer Operation II Lab
44 CHL603 VI Chemical Engineering Lab IX CRE -II) CHL602 VI Chemical Reaction Engineering II Lab
45 CHC701 VII Process Equipment Design. (PED) CHC502 V Heat Transfer Operations
46 CHC702 VII Process Engineering CHC604 VI Process Engineering and Economics
47 CHC703 VII Process Dynamics and Control (PDC) CHC701 VII Instrumentation Process Dynamics and Control

Page 42

40
48 CHDE703X Department Elective III
49 CHDE7031 VII Corrosion Engineering CHDO7031 VII Corrosion Engineering
50 CHDE7032 VII Industrial organization and
Management CHDO6023 VI Industrial Organization and Management
51 CHDE7033 VII Petroleum Refining Technology CHDO7042 VII Petroleum Refining Technology
52 CHDE7034 VII Food Technology CHDO5011 V Food Engineering
53 CHP701 VII Project A CHP701 VII Major Project I
54 CHS701 VII Seminar CHM501 V Mini Project -2A
55 CHL701 VII PED Lab CHL702 VII Chemical Engineering Equipment Design Lab
56 CHL702 VII Chemical Engineering Lab X (PDC) CHL701 VII Instrumentation Process Dynamics and Control
Lab
57 CHC801 VIII Modeling, Simulation & Optimization
(MSO) CHC801 VIII Modelling Simulation and Optimization
58 CHC802 VIII Project Engineering &
Entrepreneurship Management CHDO7033 VII Project Management for Chemical Process
Industries
59 CHC803 VIII Energy System Design CHDO8051 VIII Energy System Design
60 CHDE804X VIII Department Elective IV
61 CHDE8041 VIII Advanced Process Control CHC701 VII Instrumentation Process Dynamics and Control
62 CHDE8042 VIII Total Quality Management CHDO5013 V Total Quality Management
63 CHDE8043 VIII Advanced Separation Technology CHDO8052 VIII Advanced Separation Technology
64 CHDE8044 VIII Polymer Technology CHDO6022 VI Polymer Technology
65 CHP801 VIII Project B CHP801 VIII Major Project II
66 CHL801 VIII Chemical Engineering Lab XI (MSO) CHL801 VIII Modelling Simulation and Optimization Lab



Offg. Associate Dean Offg. Dean
Faculty of Science and Technology Faculty of Science and Technology