MCA Manual on CBCGS and equivalance for CBSGS 1 Syllabus Mumbai University


MCA Manual on CBCGS and equivalance for CBSGS 1 Syllabus Mumbai University by munotes

Page 1

Page 2

AC : 26/12/2018
Item No. : 4.12






UNIVERSITY OF MUMBAI



















Manual on
CHOI CE BASED CREDIT SYSTEM
for
Postgraduate Program
M. C. A.
(Master of Computer Application)

under
FACULTY OF TECHNOLOGY (with
effect from the academic year 201 6-17)

Page 3

1 Introduction

1.1 Recommendations of National Regulatory Authorities

The University Gra nts Commission (UGC), the National Assessment andAccreditation
Council (NAAC), the Distance Education Council (DEC) and even the National Knowledge
Commission (NKC) have time and again come out with recommendations for improving
thequality and effectiveness of Higher education provisions in the country. The ministry of
Human Resource Development at the Central level and the Ministry of Higher & Technical
Education, Govt. of Maharashtra have also repeatedly stressed on the need for universities to pay
prompt attention to improve the quality of education.

An important concern voiced more strongly in recent times, is the need to develop a Choice -Based
Credit System (CBCS) in tune with global trends and the adoption of a sound grading system for
reflecting learn er performance. To quote Shri S. K. Tripathi, former Secretary, Dept. of Secondary
and Higher Education, Ministry of Human Resource Development, Govt. of India, “...... The demand
for socially relevant, economically productive, globally competitive, cultur allysustaining and
individually satisfying programmes that cater to the needs of the present times is fast growing. The
constraints of pursuing programmes and participation in pre -determined combination of Courses
pose rigidities not in keeping with the de mands of the changing times….

There is a need for a fully convertible credit -based system acceptable to other universities.

Recommendation of the UGC in its Action Plan for Academic and Administrative Reforms
(Ref. UGC letters January 2008; March 2009) “ ……. Curricular flexibility and learners’mobility
is an issue that warrants our urgent attention. These can be addressed by introducing credit
based courses and credit accumulation. In order to provide with some degree of flexibility to
learners, we need to provide flexibility in course selection and also a minimum as well as a
maximum permissible span of time in which a course can be completed by a learner… The
Choice -Based Credit System (CBCS) imminently fits into the emerging socioeconomic milieu,
and cou ld effectively respond to the educational and occupational aspirations of the upcoming
generations. In view of this, institutions of higher education in India would do well to invest
thought and resources into introducing CBCS. Aided by modern communicatio n and information
technology, CBCS has a high probability to be operationalised efficiently and effectively —
elevating learners, institutions and higher education system in the country to newer heights…”.

Page 4

The National Knowledge Commission (NKC) under the chairmanship of Mr. Sam Pitroda,
inits report to the Prime Minister on 29th November 2006) has also reiterated the importance of
higher education and the contribution it has made to economic development, social progress and
political democracy in independ ent India. However, the Commission has also pointed out to a
“serious cause for concern” at this juncture. According to Mr. Pitroda, “ …. it is important for
usto recognize that there is a quiet crisis in higher education in India which runs deep. And the
time has come to address this crisis in a systematic, forthright manner. …. There is a need for a
transition to a course credit system where degrees are granted on the basis of completing a
requisite number of credits from different courses, which provides learners with choices….

1.2 Rationale for introduction of Credit and Grading System

The UGC while outlining the several unique features of the Choice -Based Credit System
(CBCS) has, in fact, given in a nutshell, the rationale for its introduction. Among the features
highlighted by the UGC are: Enhanced learning opportunities, ability to match
learners’scholastic needs and aspirations, inter -institution transferability of learners (following
the completion of a semester), part -completion of an academic pro gramme in the institution of
enrolment and part -completion in a specialized (and recognized) institution,improvement in
educational quality and excellence, flexibility for working learners to complete the programme
over an extended period of time, standard ization and comparability of educational programmes
across the country, etc.

This credit and grading based system enables a much -required shift in focus from teacher -centric
to learner -centric education since the workload estimated is based on the investm ent of time in
learning, not in teaching. It also focuses on continuous evaluation which will enhance the quality
of education. It can be concluded from the above discussion that it is very much essential to
implement the credit and grading based higher ed ucation in India. University of Mumbai has
taken a lead in implementing the system through its affiliated Institutes. In this regard it is very
much essential to train and educate the faculty and staff in the new approach of education system
for successful implementation. The essential information is made easily accessible through this
manual. Course credit structure, examination/assessment and grading are mainly focused aspects
of this manual and discussed in subsequent chapters.

Page 5

2. COURSE CREDIT STRUCTUR E – For C hoice Based System

As the requirements for a particular degree (postgraduate), a certain quantum of academic work
measured in terms of credits is laid down in general. Every semester by satisfactorily clearing
courses/other academic activities a learner earns credits. The amount of credit associated with a
course is dependent upon the number of hours of instructions per week in that course. Similarly
the credit associated with any of the other activities is dependent upon the quantum of work
expec ted to be put in for each of the other activity per week.

2.1 Credit Assignment

2.1.1 Theory and Laboratory Courses:

Courses are broadly classified as Theory courses and Laboratory Courses. Theory courses
consist of lecture ( L) and /or tutorial ( T) hour s, but may have attached practical ( P) hours in
special cases. Laboratory courses consist of practical hours, but may have attached tutorial hours
in special cases. Credit ( C) for a course is dependent on the number of hours of instructions per
week in tha t course, and is obtained by using a multiplier of one ( 1) for lecture and tutorial hours,
and a multiplier of half ( 1/2) for laboratory hours. Thus, for example, a theory course having
four lectures and one tutorial per week throughout the semester carrie s a credit of 5. Similarly,
alaboratory course having two laboratory hours per week throughout semester carries acredit of
1.

For example –


Theory course Laboratory course

L T P C L T P C

4 1 0 5
0 0 2 1



2.1.2 Seminars ( Research Paper)

The program may prescribe Seminar as a requirement for the MCA. Seminar is a course where in
under the guidance of a faculty member a learner is expected to do an in -depth study in a
specialized area by doing survey of p ublished technical literature, understanding different aspects
of the problem. While doing this, the learner is expected to critically analyze works of various
authors/researchers, learn the investigation methodologies, study concepts, techniques and the
results presented in these papers, and present a seminar. It is mandatory to give a

Page 6

seminarpresentation before a panel constituted for the purpose as mentioned in
syllabus/curriculum manual of respective programme. Seminars typically carry 1 credit .

2.1.3 Projects/ Presentations:

MCA Project:

A Project as a requirement for the MCA degree, wherein under the guidance of a faculty
member, a group of not more than four learners in the sixth semester, is required to do some
innovative work with the application of knowledge gained while learning various courses in the
earlier years. The student is expected to do an exploratory work and study of latest methods and
technologies, software engineering methodologies and project development practices used by IT
and no n – IT Industries. They work out a Project plan and carry it out through development
cycles and experimentation and/or modeling / computation/ testing. Through the Project work
the learner has to exhibit skills for design, analysis, coding, debugging, test ing and synthesis.

These Projects will be offered as Mini Project – I, Mini Project – II and Internship Project

Mini Project – I and II are mini projects based on open source technologies assigned by the
facultysupervisor / mentor; which student will do for 30 days (one month) at the end of the
second semester and fourth semester respectively from 1st June to 30th June and its
evaluation willbe done in the third semester and fifth semester respectively . It will carry 2
credits each.

Internship Project – is an Internship project performed in Industry, which student will do
for 150 days (five months) in the sixth semester from 1st January to 31st May . It will carry 15
credits.
2.2 Minimum Credit Requirements

The minimum credit required for award of a MCA d egree is 152{ [Sem (I + II) (26+26=52)]
+[Sem (III + IV) (28 +28=56)] + [Sem (V + VI) (28 + 16 =44 )] }. This is normally divided into
Theory courses, tutorials, laboratory courses, seminars and projects in duration of six semesters.
The credits are distribu ted semester wise as shown in the structure and syllabus manual of the
programme. Courses generally progress in sequences, building competencies and their
positioning indicates certain academic maturity on the part of the learners. Learners are expected
to follow the semester wise schedule of courses given in the syllabus manual of respective
programmes.

Page 7

2.3 Course/Subject codes

M. C. A. Programme: In the syllabus manual of the programme of MCA, subject code
isassigned for each course. The subject code co nsists of six to seven digits. First two digits
(letters) indicate the program of a particular discipline, next digit (letter) indicates course is
either core/compulsory or elective or laboratory or seminar or Dissertation/Project. A fourth digit
(number) indicates semester of a program and fifth and sixth digit (number) indicates serial
number of course. A seventh digit (number) is only applicable for elective course which
indicates the serial number of elective course in that group.

For example -


Core/ compulsory Elective course Laboratory Seminar Dissertation
course course

**C101 **E101 **L101 **S301 **D401



Where,
First two digit (letters) ** : indicates program name (CA)
Third digit (letter) C : indicates Core/Compulsory course;
E : indicates Elective course
L : indicates laboratory course;
S : indicates Seminar
D : indicates Dissertation
Fourth digit (number) 1/3/4 : indicates semester in which that course to be studied
Fifth and sixth digit (numbers) 01 : indicates se rial number of course
Seventh digit (number) 1/2/3/4 : indicates serial number of elective course in a group

Page 8

3. EXAMINATION / ASSESSMENT AND GRADING
Semester wise performance assessment of every registered learner is to be carried out through
various m odes of examinations. These include Internal Assessment and End Semester
Examination. Internal Assessment includes class tests, home assignments based on live
problems, course projects either in a group or individually. The modes of evaluation and
distribu tion of weightage for each of the assessments is given in the syllabus manual of the
programme. Normally weightage of Internal Assessment and End Semester Examinationis 20
and 80 percentage respectively in theory courses. In laboratory courses continuous a ssessment
should be carried out and appropriate weightage should be given to each practical/ assignment/
course project and proper record of the same to be preserved by the concerned faculty for the
purpose of inspection as and when required.

3.1 Attendan ce

Attendance for all Theory, Tutorial, Practical, Seminar and Project/ Dissertation is compulsory.
As per the University ordinance 119, 75% attendance is compulsory for keeping the term.

3.2 Modes of Assessment/Evaluation

3.2.1 Modes of Evaluation for Theory Courses

Various modes of assessment used for rating learners’ performance in a theory course include
Internal Assessment and End Semester Examination. Relative weightage for Internal Assessment
is typically 20 percent. This will consist of two test out of which one is compulsory class test and
another is either a class test or assignment on live problems or course project in a
group/individually.

The end semester examination will be held as per the university schedule and the relative
weightage for this would be 80 percent. It is normally of 3 hours duration and will cover the full
syllabus of the course. The end semester examination is mandatory. The grade for
theorycourses can be awarded only after successfully completion of both Internal
Assessme nt and
End Semester Examination of the respective course as per the curriculum manual of the
respective programme .

Page 9

3.2.2 Modes of Evaluation for Laboratory Courses

The assessment in a laboratory course will be based on regular supervision of the learner ’s work,
her/his performance in viva -voce examinations, the quality of their work as prescribed through
laboratory journals and an end semester test that contains performing an experiment if practical
examination is mentioned. It is obligatory to maintain a laboratory journalas prescribed by the
course instructor. Final submission/examination for laboratory courses will normally be held
before the end semester examination (final theory examinations). The grade for
laboratorycourses can be awarded only after successfully completion of Term Work,
Practical and/or Oral examination as per the curriculum manual of the programme.

3.2.3 Modes of Evaluation for Seminars

Seminars are evaluated based on a written report, and an oral presentation before a panel of
examiners appointed by Head of Department/ Institute. The supervisor and/or co -supervisor,
when involved, are part of the panel. The grade for Seminar can be awarded only after
successfully completion of Term Work and Oral Presentation as per the curriculum manualof
the programme. The evaluation of the seminars is completed before the commencement of the
end semester examination.

3.2.4 Modes of Evaluation for Projects

MCA Project: Mini Project I , Mini Project II and Internship Project - are separately graded .
These projects are supervised or guided, and need regular interaction (at least once a week) with
the supervisor/guide. Project group has to submit a project report and defend it in front of a panel
of examiners. Panel of examiners for Mini Project I and Mini Project II evaluation will be
appointed by Head of Department/Institute, while as for Internship Project and Research paper
evaluation will be conducted by pair of Internal and External examiners appointed by University.
The dates for submission of r eports, the dates for presentations are to be scheduled as per the
guidelines of University and details of mode of assessment are given in the curriculum manual of
the programme. Project is a part of term work; the project report will not be accepted if st udents
fail to complete the project successfully. The grade for Project can be awarded only after
successfully completion of Term Work and Oral Presentation as per the curriculum manual
of the programme.

Page 10

3.3 Grading of Performance

Letter Grade and Grade Point Allocation

The choice based credit system will be effective from the academic year 201 6-2017 for Faculty
of Technology of University of Mumbai. In every course, based on the combined performance in
all assessments in a particular semester as per the curriculum/syllabus, the student is awarded a
letter grade. These letter grades not only indicate a qualitative assessment of the learner’s
performance but also carry a quantitative (numeric) equivalent called the Grade Point. The letter
grades and their equivalent grade point applicable for MCA programm are given below:

A learner who remains absent in any form of evaluation/examination, letter grade allocated to
him/her should be AB and corresponding grade point is zero. S/he should reappear for the said
evaluation/examination in due course.


Percentage of Marks Obtained Letter Grade Grade Points Performance
80.00 and above O 10 Outstanding
75.00 – 79.99 A 9 Excellent
70.00 – 74.99 B 8 Very Good
60.00 – 69.99 C 7 Good
55.00 – 59.99 D 6 Fair
50.00 – 54.99 E 5 Average
45.00 – 49.99 P 4 Pass
Less than 45.00 F 0 Fail
Absent AB 0 Fail



3.4 SGPI/ CGPI Calculation

3.4.1 Semester Grade Performance Index (SGPI)

The performance of a learner in a semester is indicated by a number called Semes ter Grade
Performance Index (SGPI). The SGPI is the weighted average of the grade points obtained in all
the courses by the learner during the semester. For example, if a learner passes five courses
(Theory/labs./Projects/ Seminar etc.) in a semester with credits C 1, C2, C3, C4 and C 5 and
learners grade points in these courses are G 1, G2, G3, G4 and G 5 respectively, then learners’
SGPI is equal to:

Page 11



The SGPI is calculated to two decimal places. The SGPI for any semester will take into
consideration the “ For AB” grade awarded in that semester. For example if a learner has failed in
course 4, the SGPI will then be computed as:


3.4.2 Cumulative Grade Performance Index (CGPI)

An up to date assessment of the overall performance of a learner from the time s /he entered the
University of Mumbai is obtained by calculating a number called the Cumulative Grade
Performance Index (CGPI), in a manner similar to the calculation of SGPI. The CGPI therefore
considers all the courses mentioned in the curriculum/syllabus manual, towards the minimum
requirement of the degree learner have enrolled for. The CGPI is calculated at the end of every
semester to two decimal places and is indicated in semester grade report cards.

The CGPI will reflect the failed status in case of F grade(s), till the course(s) is/are passed .
When the course(s) is/are passed by obtaining a pass grade on subsequent examination(s) the
CGPI will only reflect the new grade and not the fail grades earned earlier.

Example: Up to semester r a learner has registered for n courses, among which s/he has “ F”
grade in ith course. The semester gradereport at the end of semester r therefore willcontain a
SGPI calculated as:



Even if a learner has failed in a course more than once, the course will figure only once in the
numerator as well as the denominator . At the end of semester r+1s/he has appeared
forexamination for k number of courses including the ithbacklog course and has cleared all the
courses including the backlog course, the CGPI at the end of this se mester is calculated as,

Page 12



There will also be a final CGPI calculated which considers all the credits earned by the learner
specified for a particular programme.

3.5 Heads of Passing

Internal Assessment (IA) and End Semester Examination (ESE) should b e two separate heads for
passing. Apart from these, Practical and /or Oral examination also should be independent head/s
of passing.

3.6 Promotion of Learner and Award of Grades

A learner will be declared PASS and eligible for grade in M.C.A. course ( post graduate
programme) if,

• A learner secures at least 45% marks in each head of passing mentioned above.

3.7 Carry Forward of Marks

In case of a learner who does not fulfill criteria mentioned in section 3.4 and fails in the
InternalAssessment and/or End Se mester Examination in one or more courses:

• A learner who PASSES in the Internal Assessment but FAILS in the End Semester
Examination of the course shall reappear for the End Semester Examination of that
course. However his/her marks of the Internal Assess ment shall be carried over and
he/she shall be entitled for grade obtained by him/her on passing.

• A learner who PASSES in the End Semester Examination but FAILS in the Internal
Assessment of the course shall reappear for the Internal Assessment of that
course.However his/her marks of the End Semester Examination shall be carried over
and he/she shall be entitled for grade obtained by him/her on passing.

3.8 Reexamination of Internal Assessment and End Semester Examination

Reexamination for Internal Assess ment should be completed before the commencement ofnext
semester theory examination.

Page 13

Example: A learner who is supposed to reappear for Internal Assessment in semester -I
coursewill appear for the reexamination before commencement of End Semester Examinati on
of semester -II.

Re-examination of Internal Assessment will be based on single examination having same marks
as of original assessment. A learner who supposed to reappear for Internal Assessment will be
given some work by the concerned teacher. The wor k assigned can be of the form of a course
project/ assignment problems/ test/ tutorials etc. A learner will do the submission of the assigned
work in the predefined period. Records should be maintained properly for all the re -examinations
as well as Intern al Assessments.

Reexamination of End Semester Examination will be conducted as per the schedule planned
by University of Mumbai

3.9 Allowed to Keep Terms (ATKT):

1. A learner shall be allowed to keep term for Semester II irrespective of grades obtained in
each course of Semester I.

2. A learner shall be allowed to keep term for Semester III if s/he passes each of Semester I
and Semester II
OR
S/he fails in not more than five heads of passing of Semester I and Semester II taken
together.
3. A learner shall be all owed to keep term for Semester IV irrespective of grades obtained in
each course of Semester III.
4. A learner shall be allowed to keep term for Semester V if s/he passes in all heads of
Semester I, Semester II, Semester III and Semester IV
OR
S/he has pas sed in all heads of Semester I and Semester II and fails in not more than
fiveheads of passing of Semester III and Semester IV taken together.
5. A learner shall be allowed to keep term for Semester VI irrespective of grades obtained in
each course of Semest er V.
Note: Grade AB should be considered as failed and treated as one head for deciding ATKT

Note: Even though Term Work is not a separate head of passing, a learner should satisfactorily
complete Term Work in all courses for a particular semester as p er syllabus/curriculum manual
to be eligible to appear for any form of examination.

Page 14

3.10 Student Transfer from Credit and Grading based (CBSGS) to Choice Based Credit
System (CBC GS) :

 Students are allowed to transfer from CBSGS to CB CGS subject to clear in equivalent
subject at the respective semester as per Equivalence mentioned in section 3.12
 Students who are freshly taking admission for Second year need to follow Choice Based
Credit System (CBCGS)
 Students who are passing the subjects from Credit an d Grading based (CBSGS) upto
semester IV and then transferring to TYMCA for Choice Based Credit System
(CBCGS) will be evaluated for 150 credits to award the degree of MCA . Such students
will have final evaluation based on 150 credits where they will hav e 26 credits for
semester IV as that of mentioned in Credit and Grading based ( CBSGS) system .

3.11 Semester Grade Report

At the end of each semester the semester grade report, which reflects the performance of the
learner in that semester, is prepared a nd issued to the learner. This report includes the fail grades
as awarded. Even when a failed course is passed in a later semester, no new modified grade
report for that semester in which the fail grade was awarded will be issued. In case of backlog
course s learner should be issued separate grade report card as and when s/he passes the course/s.

The grade cards can be issued to the Learners on the basis of the calculations of SGPI/ CGPI
given in section 3.4 in a uniform format given by the University. The format of the grade card for
the examinations conducted by the colleges shall be the same as the format for all the concerned
programmes. The grade card will reflect the letter grade obtained by the learner, credit points of
the individual courses of a par ticular semester, calculation of SGPI for each semester and the
CGPI for all the successfully completed courses of Programme till that semester examination.






Page 15


3.12 : Equivalence Rule
SEM I SEM II SEM III SEM IV SEM V SEM VI
CGSG
S
Subje
ct
Code CBC G
S
Subjec
t
Name CGS
GS
Subje
ct
Code CBC
GS
Subje
ct
Name CGS
GS
Subje
ct
Code CBC
GS
Subje
ct
Name CGS
GS
Subje
ct
Code CBC
GS
Subje
ct
Name CGSGS
Subject
Code CBC
GS
Subje
ct
Name CGSG
S
Subjec
t Code CBCGS
Subject
Name
OOP OOP DS DS DBM
S DBM
S ADT
A AWT AWT ADC PROJE
CT INTER
NSHIP
PROJE
CT
SE SEPM OS OS CG JAV
A JAV
A DMB
I WMT WMT Researc
h Paper Researc
h Paper
COA COA CN CN NS IS SMS CG SC UED
DM ITM FA FAM OR OR SSD Electi
ve 1 DCC Electi
ve 1
PPM PNS PNS DMM
M SPM STQ
A Electi
ve 1 Electi
ve 2 Elective 1 Electi
ve 2
Prog.
And
SE
Lab SEPM
&
OOP
Lab OS &
CN
lab CN &
OS
Lab CG L Java
&
UML
Lab Core
&
Adva
nced
JAVA AWT
&DM
BI
Lab AWT + Dot
Net OSS
for
ADC
Web
Tech
and
Mini
Pro WD &
Mini
Project
Lab DS &
PNS
lab DS&
AWD
Lab DBM
S
+ST DBM
S &
ST
Lab ADTA
+
UML CG+I
P Wireless &
Mobile
Technology +
Mini project MAU
ED
Mini
Proje
ct 1 SSD Mini
Proje
ct 2
Tota
l
Cre
dit 26 26 26 26 28 28 26 28 28 28 16 16


Page 16


CGSGS Subject Code CBCGS Subject Name
SEM I OOP OOP
SE SEPM
COA COA
PPM ITM
DM DMMM ( Sem II)
Prog. And SE Lab SEPM & OOP Lab
Web Tech and Mini Pro WD & Mini Project Lab

Sem II DS DS
OS OS
CN CN
FA FAM
PNS PNS (Sem I)
OS & CN lab OS & CN lab
DS & PNS lab DS& AWD Lab

Sem III DBMS DBMS
CG CG (Sem IV)
NS IS
OR OR
SPM STQA + SEPM (Sem I)
CG L CG+IP (Sem IV)
DBMS +ST DBMS & ST Lab
Mini Project 1

Sem IV ADTA DMBI
JAVA JAVA (Sem III)
SSD SSD
SMS SMS (Elective 2 Sem IV)
Elective 1 Elective 1
Elective 2
Core & Advanced JAVA Java Lab (Sem III )
ADTA + UML DMBI Lab + UML Lab (Sem III)

Sem V AWT AWT (Sem IV)
WMT WMT
SC AI and SC (Elective 2 Sem IV)
DCC Next Generation Networks (Elective 2
Sem IV)
UED
Elective 1 Elective 1
Elective 2
AWT + Dot Net AWT Lab (Sem IV)

Page 17

Wireles s & Mobile Technology MAUED Lab
OSS for ADC Lab
Mini project Mini Project 2

Sem VI PROJECT INTERNSHIP PROJECT
Research Paper Research Paper

List of Elective
SEM IV SEM V
CGSGS Subject
Code CBCGS Subject Name CGSGS Subject Code CBCGS Subj ect Name
Elective 1 (Select Any one) Elective 1 (Select Any one) (Departmental Elective)
GIS Entrepreneurship
Management Cyber Security Big Data Analytics
Embedded Systems ERP Multimedia Technology Multimedia System Design
SOA Ethics and CSR Informat ion System
security and Audit Intellectual property Rights
and Patents (Elective 2 Sem
V)
E Business Business Infrastructure
and Management Bioinformatics Machine Learning
Human Computer
Interface Software Quality
Assurance Management Information
System (Elective 2 Sem V)
Green Computing
Internet of Things
Elective 2 (Select Any one) Elective 2 (Select Any one) (Institutional Elective)
Digital Forensics Research Methodology
Simulation and
Modelling
Next Generation
Networks
AI and So ft
Computing