MA-SEM-II-Psychological-Testing-And-Psychometrics-Practicals-munotes

Page 1

1 1
THEORETICAL -CONCEPTUAL
ORIENTATION - I
Unit Structure
1.0 Objectives
1.1 Introduction
1.2 Measurement in Psychological Tests
1.2.1 Measurement
1.2.2 Variables and Constants
1.2.3 The Meaning of Numbers
1.2.4 Relevance of Numbers in Psychological Testing
1.2.5 What Can We Conclude About the Meaning of Numbers in
Psychological Measurements?
1.3 Types of Statistics
1.4 Measurement Theories
1.4.1 Classical Test Theory
1.4.2 Modern Test Theory
1.5 Summary
1.6 Questions
1.7 References
1.0 OBJECTIVES After lea rning this chapter, students will understand the following
concepts:
 Importance of the measurement in Psychology
 Types of statistics used in Psychology
 Theories of measurement
1.1 INTRODUCTION Psychological Test :
A psychological test is a systematic proced ure for obtaining samples of
behaviour, relevant to cognitive or affective functioning, and for scoring
and evaluating those samples according to standards. Psychological tests
are often described as standardized for two reasons, both of which address
the need for objectivity in the testing process. The first has to do with
uniformity of procedure in all important aspects of the administration,
scoring, and interpretation of tests. The time and place when a test is
administered, as well as the circumstances under which it is administered munotes.in

Page 2


Psychological Testing And Psychometrics Practicals
2 and the examiner who administers it, affect test results. However, the
purpose of standardizing test procedures is to make all the variables that
are under the control of the examiner as uniform as possible so that
everyone who takes the test will be taking it in the same way.
The second meaning of standardization concerns the use of standards for
evaluating test results. These standards are most often norms derived from
a group of individuals —known as the normative or standa rdization
sample —in the process of developing the test. The collective performance
of the standardization group or groups, both in terms of averages and
variability, is tabulated and becomes the standard against which the
performance of other individuals w ho take the test after it is standardized
will be gauged.
The term test should be used only for those procedures in which test
takers’ responses are evaluated based on their correctness or quality. Such
instruments always involve the appraisal of some aspe ct of a person’s
cognitive functioning, knowledge, skills, or abilities.
On the other hand, instruments whose responses are neither evaluated nor
scored as right -wrong or pass -fail are called inventories, questionnaires,
surveys, checklists, schedules, or projective techniques, and are usually
grouped as personality tests. These are tools designed to elicit information
about a person’s motivations, preferences, attitudes, interests, opinions,
emotional makeup, and characteristic reactions to people, situati ons, and
other stimuli. Typically, they use questions of the multiple -choice or true -
false type, except for projective techniques, which are open -ended. They
can also involve making forced choices between statements representing
contrasting alternatives or rating the degree to which one agrees or
disagrees with various statements.
Most of the time, personality inventories, questionnaires, and other such
instruments are of the self -report variety, but some are also designed to
elicit reports from individual s other than the person being evaluated (e.g.,
a parent, spouse, or teacher). For the sake of expediency and following
common usage, the term test will be used throughout this book to refer to
all instruments, regardless of type, that fit the definition of a psychological
test. Tests that sample knowledge, skills, or cognitive functions will be
designated as ability tests, whereas all others will be referred to as
personality tests.
1.2 MEASUREMENT IN PSYCHOLOGY AND IN THE NATURAL SCIENCES 1.2.1 Measurement :
The concept of measurement is at the heart of psychological testing as a
scientific enterprise for the study of human behaviour. Measurement
involves the use of certain devices or rules for assigning numbers to
objects or events (Stevens, 1946). If we ap ply this process systematically,
then to a large extent, a phenomenon that is measured is made more easily munotes.in

Page 3


3 Schizophrenia And Other Psychotic Disorders - I subject to confirmation and analysis, and thus becomes more objective as
well. In other words, by systematically analyzing, categorizing, and
quantif ying observable phenomena we place them in the scientific arena.
Central to the definition of psychological tests is the fact that they consist
of carefully chosen samples of behaviour to which a numerical or category
system is applied according to some pr e-established standards.
Psychological testing is largely coextensive with the field of
psychometrics, or psychological measurement, and is one of the primary
tools for the science and practice of psychology. The use of numbers in
testing requires the use of statistics.
1.2.2 Variables and Constants
One of the most basic distinctions we can make in any science is between
variables and constants. A variable is anything that varies, whereas a
constant is anything that does not. There are many variables in our world
and few constants. One example of a constant is π (pi), the ratio of the
circumference of a circle to its diameter, a number that is usually rounded
to 3.1416.
Variables, on the other hand, are everywhere, and they can be classified in
a multitude o f ways. For example, some variables are visible (e.g., sex, the
color of eyes) and others invisible (e.g., personality, intelligence); some
are defined so as to pertain to very small sets and others to very large sets
(e.g., the number of children in a fam ily or the average income of
individuals in a country); and some are continuous, others discrete.
Discrete variables are those with a finite range of values —or a potentially
infinite, but countable, range of values. Dichotomous variables, for
instance, are discrete variables that can assume only two values, such as
sex or the outcome of coin tosses. Polytomous variables are discrete
variables that can assume more than two values, such as marital status,
race, and so on. Other discrete variables can assume a wider range of
values but can still be counted as separate units; examples of these are
family size, vehicular traffic counts, and baseball scores. Although in
practice it is possible to make errors in counting, in principle, discrete
variables can be tal lied precisely and without error.
Continuous variables such as time, distance, and temperature, on the other
hand, have infinite ranges and really cannot be counted. They are
measured with scales that could theoretically be subdivided into infinity
and hav e no breaks in between their points, such as the scales in analogue
clocks, yardsticks, and glass thermometers.
In psychological testing, we are almost always interested in variables that
are continuous (e.g., degrees of integrity, extraversion, or anxiety ), yet we
measure with tools, such as tests or inventories, that are not nearly as
precise as those in the physical and biological sciences.
Therefore, we must be aware of potential sources of error and look for
pertinent estimates of error whenever we ar e presented with the results of
any measurement process. For example, if polls taken from samples of munotes.in

Page 4


Psychological Testing And Psychometrics Practicals
4 potential voters are used to estimate the outcome of an election, the
estimated margins of error have to be displayed alongside the results of the
polls.
In summary, when we look at the results of any measurement process, we
need to keep in mind the fact that they are inexact. With regard to
psychological testing in particular, whenever scores on a test are reported,
the fact that they are estimates should b e made clear; furthermore, the
limits within which the scores might range as well as the confidence levels
for those limits need to be given, along with interpretive information.
1.2.3 The Meaning of Numbers :
Because numbers can be used in a multitude of w ays, Stevens (1946)
devised a system for classifying different levels of measurement on the
basis of the relationships between numbers and the objects or events to
which the numbers are applied. These levels of measurement or scales —
outlined in Table 1 —specify some of the major differences in the ways
numbers may be used as well as the types of statistical operations that are
logically feasible depending on how numbers are used.
1. Nominal Scales:
At the simplest level of his classification, Stevens placed what he called
nominal scales. As this implies, in such scales, numbers are used solely as
labels to identify an individual or a class. Some examples of a nominal
scale are the Aadhar numbers that identify most people who live in India;
these numbers are useful because each is assigned to only one person and
can therefore serve to identify persons more specifically than their first
and last names, which can be shared by many people. Numbers can also
be used to label categorical data, which is data related to variables such as
gender, political affiliation, color, and so forth —that is, data that derives
from assigning people, objects, or events to particular categories or
classes.
2. Ordinal Scales:
The numbers used in ordinal scales convey one more bit of m eaning than
those in nominal scales, albeit a significant one. In these scales, in addition
to identity, there is the property of rank order, which means that the
elements in a set can be lined up in a series —from lowest to highest or
vice versa —arranged o n the basis of a single variable, such as birth order
or level of academic performance within a given graduating class.
Although rank - order numbers convey a precise meaning in terms of
position, they carry no information with regard to the distance betwe en
positions. Thus, the students in a class can be ranked in terms of their
performance, but this ranking will not reflect the amount of difference
between them, which could be great or small. Similarly, in any
hierarchical organization, say, the U.S. Navy , ranks (e.g., ensign,
lieutenant, commander, captain, admiral) denote different positions, from
lowest to highest, but the differences between them in terms of
accomplishments or prestige are not the same. munotes.in

Page 5


5 Schizophrenia And Other Psychotic Disorders - I 3. Interval Scales:
In interval scales, numbers acquire yet one more important property. In
these scales, the difference between any two consecutive numbers reflects
an equal empirical or demonstrable difference between the objects or
events that the numbers represent. An example of this is the use of d ays to
mark the passage of calendar time. One day consists of 24 hours, each
hour of 60 minutes, and each minute of 60 seconds; if two dates are 12
days apart, they are exactly three times as far apart as two dates that are
only 4 days apart. Note, however , that calendar time in months is not an
equal -unit scale because some months are longer than others. Furthermore,
calendar time also typifies a characteristic of interval scales that limits the
meaning of the numbers used in them, namely, that there is no true zero
point. In the case of calendar time, there is no agreed -upon starting point
for the beginning of time. Different cultures have devised arbitrary starting
points, such as the year Christ was presumed to have been born, to mark
the passage of year s.
On interval scales, the distances between numbers are meaningful. Thus,
we can apply most arithmetical operations to those numbers and get
results that make sense.
4. Ratio Scales:
Within ratio scales, numbers achieve the property of additivity, which
means they can be added —as well as subtracted, multiplied, and
divided —and the result expressed as a ratio, all with meaningful results.
Ratio scales have a true or absolute zero point that stands for ―none of‖
whatever is being measured. In the physical sc iences, the use of this type
of measurement scale is common; times, distances, weights, and volumes
can be expressed as ratios in a meaningful and logically consistent way.
For instance, an object that weighs 16 pounds is twice as heavy as one that
weighs 8 pounds (16/8 = 2), just as an 80 -pound object is twice as heavy
as a 40 -pound object (80/40 = 2). In addition, the zero point in the scale of
weights indicates absolute weightlessness.
In psychology, ratio scales are used primarily when we measure in ter ms
of frequency counts or of time intervals, both of which allow for the
possibility of true zeros.
Table 1.1: Four types of scales Scale True Zero Equal Intervals Order Category Example Nominal No No No Yes Marital Status, Sex, Gender, Ethnicity Ordinal No No Yes Yes Student Letter Grade, NFL Team Rankings Interval No Yes Yes Yes Temperature in munotes.in

Page 6


Psychological Testing And Psychometrics Practicals
6 Fahrenheit, SAT Scores, IQ, Year Ratio Yes Yes Yes Yes Age, Height, Weight
Source: https://thebiologynotes.com/nominal -ordinal -interval -and-ratio-
data/
1.2.4 Relevance of Numbers in Psychological Testing :
Though it is not universally favored, Stevens’s system for classifying
scales of measurement helps to keep the relativity in the meaning of
numbers in proper perspective. The results of most psychologica l tests are
expressed in scores, which are numbers that have specific meanings.
Unless the limitations in the meaning of scores are understood, inaccurate
inferences are likely to be made on the basis of those scores.
Unfortunately, this is too often the c ase, as can be seen in the following
example:
Example: The problem of ratio IQs. The original intelligence quotients
devised for use with the Stanford -Binet Intelligence Scale (S -B) were ratio
IQs. That is to say, they were real quotients, derived by divid ing the
mental age (MA) score a child had obtained on the S -B test by the child’s
chronological age (CA) and multiplying the result by 100 to eliminate the
decimals. The idea was that average children would have similar mental
and chronological ages and IQ s of approximately 100.
Children functioning below the average would have lower mental than
chronological ages and IQs below 100, while those functioning above the
average would have higher mental than chronological ages and IQs above
100. This notion work ed fairly well for children in the early and middle
school years, during which there tends to be a somewhat steady pace of
intellectual growth from year to year.
However, the MA/CA ratio simply did not work for adolescents and adults
because their intellec tual development is far less uniform —and changes
are often imperceptible —from year to year. The fact that the maximum
chronological age used in calculating the ratio IQ of the original S -B was
16 years, regardless of the actual age of the person tested, cr eated
additional problems of interpretation.
Furthermore, the mental age and chronological age scales are not at the
same level of measurement. Mental age, as assessed through the first
intelligence tests, was basically an ordinal -level measurement, wherea s
chronological age can be measured on a ratio scale. For these reasons,
dividing one number by the other to obtain a quotient simply did not lead
to logically consistent and meaningful results.
The following table shows numerical examples highlighting som e of the
problems that have caused ratio IQs to be abandoned.
munotes.in

Page 7


7 Schizophrenia And Other Psychotic Disorders - I Table 1.2 Examples of Ratio IQ Computation Subject Mental Age (MA) Chronological Age (CA) Difference (MA - CA) Ratio IQ Ramesh 6 Years 5 Years 1 Year (6/5)×100 = 120 Suresh 12 Years 10 Years 2 Years (12/10)× 100 =120 Rupesh 18 Years 15 Years 3 Years (18/15)×100 =120
Problem 1:
The mental age score required to obtain any given IQ keeps rising for each
successive chronological age, so the ratio of IQs at different chronological
ages are not equivalent.
Problem 2: Whereas chronological age rises steadily, mental age does not.
Since the highest mental age achievable on a given intelligence test cannot
be limitless, even when a limit is placed on the maximum chronological
age used to compute IQs —as was done for a long time in the S -B scale —
the IQs that most adults can attain are artificially constrained compared to
those of children and adolescents.
Solution: Because of this and other problems with ratio IQs as well as with
the concept of mental ages, the use of the ratio IQ has been abandoned.
The term IQ is now used for a score that is not a ratio IQ and is not even a
quotient. This score, known as the deviation IQ, was pioneered by David
Wechsler.
1.2.5 What Can We Conclude About the Meaning of Numbers in
Psychological Measurements?
In psychology, it is essential to keep in mind that most of our
measurement scales are of an ordinal nature. The equality of units is
approximated by the scales used in many types of test scores, but such
equality is never as permanent or as complete as it is in the physical
sciences because the units themselves are relative to the performance of
the samples from which they are derived. The use of ratio scales in
psychology is limited to measures of frequencies, react ion times, or
variables that can be meaningfully expressed in physical units. For
example, if we were using assembly -line output per hour as a measure of
the speed of performance in an assembly line job, we could say that
Worker A, who produces 15 units pe r hour, is 3 times as fast as Worker B,
who produces only 5 units per hour. Note, however, that we could not say
that Worker A is 3 times as good an employee as Worker B because speed
is probably not the only index of job performance even in an assembly li ne
operation. The overall level of performance is a more complex variable
that most likely can be assessed only with a qualitative, ordinal scale.

munotes.in

Page 8


Psychological Testing And Psychometrics Practicals
8 1.3 TYPES OF STATISTICS Since the use of numbers to represent objects and events is so common in
psychologica l testing, the field involves the substantial application of
statistics, a branch of mathematics dedicated to organizing, depicting,
summarizing, analyzing, and otherwise dealing with numerical data.
Numbers and graphs used to describe, condense, or repres ent data belong
in the realm of descriptive statistics. On the other hand, when data are
used to estimate population values based on sample values or to test
hypotheses, inferential statistics —a more ample set of procedures based
on probability theory —are applied. Fortunately, although both descriptive
and inferential statistics are extensively used in the development of tests,
most of the quantitative aspects of test score interpretation require only a
good grasp of descriptive statistics and a relatively small number of
techniques of the inferential type. Moreover, even though a background in
higher -level math is desirable in order to understand thoroughly the
statistics involved in testing, it is possible to understand them at a basic
level with a good do se of logic and a relatively limited knowledge of
math.
The words statistic and statistics are also used to refer to measures derived
from sample data —as opposed to those derived from populations, which
are called parameters.
Means, standard deviations, co rrelation coefficients, and other such
numbers calculated from sample data are all statistics derived in order to
estimate what is of real interest, namely, the respective population
parameters. Parameters are mathematically exact numbers (or constants,
such as π) that are not usually attainable unless a population is so fixed
and circumscribed that all of its members can be accounted for, such as all
the members of a college class in a given semester. In fact, one of the
main purposes of inferential statis tics is to estimate population parameters
on the basis of sample data and probability theory.
1. Descriptive Statistics :
Raw data usually consists of a bunch of numbers that do not convey much
meaning, even after close examination. With descriptive statist ics, we can
summarize the data so they are easier to understand. One way to
summarize data is to represent them graphically; another way is to
condense them into statistics that represent the information in a data set
numerically.
2. Measures of Central Te ndency :
One of the first things one wants to know when inspecting a data set is
where the bulk of the data can be located, as well as the data’s most
representative or central value. The principal measures of central
tendency —the mode, median, and mean —tell us these things. As with any
other statistic, each of these measures has particular advantages and munotes.in

Page 9


9 Schizophrenia And Other Psychotic Disorders - I disadvantages depending on the types of data and distributions one wishes
to describe.
3. Measures of Variability :
These statistics describe how much dis persion, or scatter, there is in a set
of data. When added to information about central tendency, measures of
variability help us to place any given value within a distribution and
enhance the description of a data set. Although there are many measures
of variability, the main indexes used in psychological testing are the range,
the semi -interquartile range, the variance, and the standard deviation.
• The range is the distance between two extreme points —the highest
and lowest values —in a distribution. Even though the range is easily
computed, it is a very unstable measure as it can change drastically
due to the presence of one or two extreme scores.
• The variance is the sum of the squared differences or deviations
between each value (X) in a distribution an d the mean of that
distribution (M), divided by N. Simply, the variance is the average of
the sum of squares (SS). The sum of squares is an abbreviation for the
sum of the squared deviation values or deviation scores, Σ (X – M )2.
Deviation scores have to be squared before being added in order to
eliminate negative numbers. If these numbers were not squared, the
positive and negative deviation scores around the mean would cancel
each other out, and their sum would be zero. The sum of squares
represents the total amount of variability in a score distribution, and
the variance (SS/N) represents its average variability. Due to th e
squaring of the deviation scores, however, the variance is not in the
same units as the original distribution.
• The standard deviation is the square root of the variance. Along with
the variance, it provides a single value that is representative of the
individual differences or deviations in a data set —computed from a
common reference point, namely, the mean. The standard deviation is
a gauge of the average variability in a set of scores, expressed in the
same units as the scores. It is the quintessentia l measure of variability
for testing as well as many other purposes and is useful in a variety of
statistical manipulations.
1.4 MEASUREMENT THEORIES: CLASSICAL TEST THEORY, MODERN TEST THEORY Test developers are basically concerned about the quality of te st items and
how examinees respond to them when constructing tests. A
psychometrician generally uses psychometric techniques to determine
validity and reliability. The psychometric theory offers two approaches in
analyzing test data: Classical test theory (CTT) and item response theory
(IRT). Both theories enable us to predict the outcomes of psychological
tests by identifying parameters of item difficulty and the abilities of test
takers. Both are concerned with improving the reliability and validity of munotes.in

Page 10


Psychological Testing And Psychometrics Practicals
10 psychological tests. Both of these approaches provide measures of validity
and reliability. There are some identified issues in the classical test theory
that concern calibration of item difficulty, sample dependence of
coefficient measures, and estimates of measurement error, which are
addressed by the item response theory.
1.4.1 Classical Test Theory:
Classical test theory is regarded as the ―true score theory.‖ The theory
starts from the assumption that systematic effects between responses of
examinees a re due only to variation in their ability to show interest. All
other potential sources of variation existing in the testing materials, such
as external conditions or internal conditions of examinees, are assumed
either to be constant through rigorous stan dardization or to have an effect
that is non -systematic or random by nature (Van der Linden & Hambleton,
2004). The central model of the classical test theory is that observed test
scores (TO) are composed of a true score (T) and an error score (E), where
the true and the error scores are independent. The variables were
established by Spearman (1904) and Novick (1966) and are best illustrated
in the formula: TO = T + E. The classical theory assumes that each
individual has a true score, which would be obtai ned if there were no
errors in measurement. However, because measuring instruments are
imperfect, the score observed for each person may differ from that
individual’s true ability. The difference between the true score and the
observed test score results f rom measurement error. Using a variety of
justifications, error is often assumed to be a random variable with a
normal distribution. The implication of the classical test theory for test
takers is that tests are fallible, imprecise tools. The score achieve d by an
individual is rarely the individual’s true score. This means that the true
score for an individual will not change with repeated administrations of
the same test. This observed score is almost always the true score,
influenced by some degree of err or. This error influences the observed
value to be higher or lower. Theoretically, the standard deviation of the
distribution of random errors for each individual reveals the magnitude of
measurement error. It is usually assumed that the distribution of ra ndom
errors will be the same for all individuals.
Classical test theory uses the standard deviation of errors as the basic
measure of error. Usually, this is called the standard error of measurement.
In practise, the standard deviation of the observed scor e and the reliability
of the test are used to estimate the standard error of measurement (Kaplan
& Saccuzzo, 1997). The larger the standard error of measurement, the less
certain the accuracy with which an attribute is measured. Conversely, a
small standar d error of measurement tells that an individual score is
probably close to the true score.
Traditionally, methods of analysis based on classical test theory have been
used to evaluate tests. The focus of the analysis is on the total test score;
the frequen cy of correct responses (to indicate question difficulty); the
frequency of responses (to examine distracters); the reliability of the test,
and item -total correlation (to evaluate discrimination at the item level) munotes.in

Page 11


11 Schizophrenia And Other Psychotic Disorders - I (Impara & Plake, 1997). Although these st atistics have been widely used,
one limitation is that they relate to the sample under scrutiny, and thus all
the statistics that describe items and questions are sample -dependent
(Hambelton, 2000). This critique may not be particularly relevant where
successive samples are reasonably representative and do not vary across
time, but this will need to be confirmed, and complex strategies have been
proposed to overcome this limitation.
1.4.2 Modern Test Theory or Item Response Theory:
Another branch of psycho metric theory is item response theory (IRT). IRT
may be regarded as roughly synonymous with latent trait theory. It is
sometimes referred to as the strong true score theory or modern mental test
theory because IRT is a more recent body of theory and makes stronger
assumptions as compared to classical test theory. This approach to testing
based on item analysis considers the chance of getting particular items
right or wrong. In this approach, each item on a test has its own item
characteristic curve that des cribes the probability of getting each particular
item right or wrong given the ability of the test takers (Kaplan &
Saccuzzo, 1997). The Rasch model, as an example of IRT, is appropriate
for modelling dichotomous responses and models the probability of an
individual's correct response on a dichotomous item. The logistic item
characteristic curve, a function of ability, forms the boundary between the
probability areas of answering an item incorrectly and answering the item
correctly. This one -parameter logi stic model assumes that the
discriminations of all items are assumed to be equal to one (Maier, 2001).
Another fundamental feature of this theory is that item performance is
related to the estimated amount of the respondent’s latent trait (Anastasi &
Urbin
statistical construct. In cognitive tests, latent traits are called the ability
measured by the test. The total score on a test is taken as an estimate of
that ability. A person’s speci
specified difficulty.
There are various approaches to the construction of tests using item
response theory. Some approaches use the two dimensions to plot item
discriminations and item difficulties. Other approaches use a three -
dimension for the probability of test -takers with very low levels of ability
getting a correct response. Other approaches use only the difficulty
parameter (one dimension), such as the Rasch Model. All these
approaches characterize the item in relation to the probability that those
who do well or poorly on the exam will have different levels of
performance.
1.5 SUMMARY A psychological test is a systematic procedure for obtaining samples of
behaviour, relevant to cognitive or affective functionin g, and for scoring
and evaluating those samples according to standards. Psychological tests
are often described as standardized for two reasons, both of which address
the need for objectivity in the testing process. The first has to do with munotes.in

Page 12


Psychological Testing And Psychometrics Practicals
12 uniformity of p rocedure in all important aspects of the administration,
scoring, and interpretation of tests. Naturally, the time and place when a
test is administered, as well as the circumstances under which it is
administered and the examiner who administers it, affec t test results. The
second meaning of standardization concerns the use of standards for
evaluating test results. These standards are most often norms derived from
a group of individuals —known as the normative or standardization
sample —in the process of dev eloping the test.
The concept of measurement is at the heart of psychological testing as a
scientific enterprise for the study of human behaviour. Measurement
involves the use of certain devices or rules for assigning numbers to
objects or events (Stevens, 1946). Psychological testing is largely
coextensive with the field of psychometrics, or psychological
measurement, and is one of the primary tools for the science and practice
of psychology.
There are four types of measurement scales: nominal, ordinal, in terval,
and ratio scales.
Since the use of numbers to represent objects and events is so common in
psychological testing, the field involves the substantial application of
statistics, a branch of mathematics dedicated to organizing, depicting,
summarizing , analyzing, and otherwise dealing with numerical data.
Numbers and graphs used to describe, condense, or represent data belong
in the realm of descriptive statistics. On the other hand, when data are
used to estimate population values based on sample valu es or to test
hypotheses, inferential statistics —a more ample set of procedures based
on probability theory —are applied.
The psychometric theory offers two approaches to analyzing test data:
Classical test theory (CTT) and item response theory (IRT). Both theories
enable us to predict the outcomes of psychological tests by identifying
parameters of item difficulty and the ab ility of test takers. Both are
concerned to improve the reliability and validity of psychological tests.
Both of these approaches provide measures of validity and reliability.
1.6 QUESTIONS 1. Discuss various concepts related to the measurement of psychol ogical
tests.
2. Critically evaluate classical test theory and modern/item response
theory.
1.7 REFERENCES  Essentials of Psychological Testing by Susana Urbina (2004).
Published by John Wiley & Sons, Inc., Hoboken, New Jersey
 Magno, C. (2009). Demonstrati ng the Difference between Classical
Test Theory and Item Response Theory Using Derived Test Data. The munotes.in

Page 13


13 Schizophrenia And Other Psychotic Disorders - I International Journal of Educational and Psychological Assessment,
Vol. 1, Issue 1, 1 -11.
 Psychological Testing by Anne Anastasi (1976). Fourth Ed. Publi shed
by MacMillan Publishing co., Inc. New York
 Psychological Testing and Assessment: An Introduction to Tests and
Measurement (2018) by Ronal Jay Cohen and Mark E. Swerdlik.
Ninth Ed.

*****
munotes.in

Page 14

14 2
THEORETICAL -CONCEPTUAL
ORIENTATION – II
Unit Structure
2.0 Objectives
2.1 Introduction
2.2 Test conceptualization
2.3 Item Analysis
2.3.1 Item difficulty
2.3.2 Item reliability
2.3.3 Item validity
2.3.4 Item discrimination
2.4 Validity
2.5 Reliability
2.6 Norms
2.7 Ethical Issues Related to Psychological Testing
2.8 Summary
2.9 Questions
2.10 References
2.0 OBJECTIVES After learning this chapter, the reader will understand the following:
 How a psychological test is developed
 The concepts related to Item analysis
 Importance of validity and reliability in test development
 Ethical issues related to Psychological Testing
2.1 INTRODUCTION All tests are not created equal. The creation of a good test is not a matter
of chance. It is the product of the thoughtful and sound application of
established principles of test construction.
In this chapter, we introduce the basics of test development and examine
in detail the processes by which tests are constructed. We explore, for
example, a number of techniques designed for the construction and
selection of good items. munotes.in

Page 15


15 Schizophrenia And Other Psychotic Disorders - II The process of developing a test occurs in five stages: 1) Test
conceptualization, 2) Test construction, 3) Test tryouts, 4) Item analysis,
5) Test revision.
Once the idea for a test is conceived (test co nceptualization), the items for
the test are drafted (test construction). The first draft of the test is then
tried out on a group of sample test -takers (test tryouts). Once the data from
the tryout are collected, test -taker’s performance on the test as a whole and
on each item is analyzed. Statistical procedures, referred to as item
analysis, are employed to assist in making judgements about which items
are good as they are, which items need to be revised, and which items
should be discarded. The analysis of the test items may include analyses of
item reliability, item validity, and item discrimination.
2.2 TEST CONCEPTUALIZATION The beginnings of any published test can probably be traced to thoughts --
self-talk, in behavioral terms. The test developer sa ys to himself or herself
something like: "There ought to be a test designed to measure (fill in the
blank) in such (as such) way." The stimulus for such a thought could be
almost anything. A review of the available literature on an existing test
designed t o measure a particular construct might indicate that such tests
leave much to be desired in terms of psychometric soundness. An
emerging social phenomenon or pattern of behavior might serve as the
stimulus for the development of a new test. If, for example , celibacy were
to become a widely practised lifestyle, then we would witness the
development of a variety of tests related to celibacy. These tests might
measure variables such as reasons for adopting a celibate lifestyle,
commitment to a celibate lifesty le, and degree of celibacy through specific
behaviors.
The development of a new test may be in response to a need to assess
mastery in an emerging occupation or profession. For example, new tests
may be developed to assess mastery in fields such as high -definition
electronics, environmental engineering, and wireless communication.
Some preliminary questions :
Regardless of the stimulus for developing the new test, a number of
questions are immediately confronted by the prospective test developer:
1) What is the test designed to measure?
2) What is the objective of the test? In the service of what goal will the
test be employed? In what way or ways is the objective of the test the
same as or different from other tests with similar goals? What real -
world beha viors would be anticipated to correlate with test -takers
responses?
3) Is there a need for this test? Are there any other tests purporting to
measure the same thing? In what ways will the new test be better than
or different from the existing ones? Will it be more comprehensive? munotes.in

Page 16


Psychological Testing And Psychometrics Practicals
16 Will it take less time to administer? In what ways would this test not
be better than existing tests?
4) Who will use these tests? Clinician? Educators? Others? For what
purposes would this test be used?
5) Who will take this test? Who is this test for? Who needs to take it?
Who would find it desirable to take it? For what age range of test -
takers is the test designed? What reading levels are required of a test -
taker? What cultural factors might affect the test -taker’s response?
6) What content will the test cover? Why should it cover this content? Is
this coverage different from the content coverage of existing tests
with the same or similar objectives? How and why is the content area
different?
7) How will the test be administered? Individually or in a group? Is it
amenable to both group and individual administration?
8) What is the ideal format for the test? Should it be true -false, essay,
multiple -choice, or in some other format? Why is the format selected
for this test the best format?
9) Should more than one form of the test be developed? On the basis of a
cost-benefit analysis, should alternate or parallel forms of this test be
created?
10) What special training will be required of test users for administering
or interpreting the test? What background and qualifications will a
prospective user of data derived from an administration of this test
need to have? What restrictions, if any, should be placed on
distributors of the test and on the test’s usage?
11) What types of respon ses will be required of test -takers? What
adaptations or accommodations are recommended for persons with
disabilities?
12) Who benefits from the administration of this test?
13) Is there any potential for harm as a result of the administration of this
test? What safeguards are built into the recommended testing
procedure to prevent any sort of harm to any of the parties involved in
the use of this test?
14) How will meaning be attributed to a score on this test? Will a test -
taker's score be compared to oth ers taking the test at the same time?
To others in a criterion group? Will the test evaluate mastery of a
particular content area?
2.3 ITEM ANALYSIS Statistical procedures used to analyse items may become quite complex. In
this section, we will briefly sur vey some procedures typically used by test munotes.in

Page 17


17 Schizophrenia And Other Psychotic Disorders - II developers in their efforts to select the best item from a pool of try -out
items. Among the tools test developers might employ to analyse and select
items are:
• An index of the item’s difficulty
• An index of t he item’s reliability
• An index of the item’s validity
• An index of the item’s discrimination
Let us imagine for a moment that we have a test of 100 items for a ninth -
grade -level American History Test (AHT). Let’s further assume that this
100 - item (dr aft) test has been administered to 100 ninth -graders. Hoping,
in the long run to standardize the test and have it distributed by a
commercial test publisher, you have a more immediate, short -term goal: to
select the 50 best of the 100 items you originally created. How might that
short -term goal be achieved? As we will see, the answer lies in item
analysis procedures.
2.3.1 The Item -Difficulty Index :
Suppose every examinee answered item 1 of the AHT correctly. Can we
say item 1 is a good item? What if no on e answered item 1 correctly? In
either case, item 1 is not a good item. If everyone gets the item right, then
the item is too easy; if everyone gets it wrong, the item is too difficult. Just
as the test as a whole is designed to provide an index of degree of
knowledge about American history, each individual item on the test is
passed (scored as correct) or failed (scored as incorrect) on the basis of
test taker’s differential knowledge of American history.
An index of an item’s difficulty is obtained by cal culating the proportion
of the total number of test takers who answered the items correctly. A
lowercase “p” (p) is used to denote item difficulty, and a subscript refers
to the item number (so p1 is read as item difficulty index for item 1”). The
value of an item -difficulty index can theoretically range from 0 (if no one
got the item right) to 1 (if everyone got the item right). If 50 of the 100
examinees answered item 2 correctly, then the item -difficulty index for
this item would be equal to 50 divided b y 100, or .5 (p2=.5). If 75 of the
examinees got item 3 right, then p3 would be equal to .75 and we could
say that item 3 was easier than item 2. Note that the larger the item -
difficulty index, the easier the item. Because p refers to the percent of
people passing an item, the higher the p for an item, the easier the item.
The statistic referred to as an item -difficulty index in the context of
achievement testing may be an item -endorsement index in other contexts,
such as personality testing. Here, the stat istic provides not a major portion
of the percent of people passing the item but a major portion of the percent
of people who said yes to, agreed with, or otherwise endorsed the item.
An index of the difficulty of the average test item for a particular tes t can
be calculated by averaging the item -difficulty indices for all the test’s munotes.in

Page 18


Psychological Testing And Psychometrics Practicals
18 items. This is accomplished by summing the item -difficulty indices for all
test items and dividing by the total number of items on the test. For
maximum discrimination among th e abilities of the test takers, the optimal
average item difficulty is approximately .5, with individual items on the
test ranging in difficulty from .3 to .8. Note, however, that the possible
effect of guessing must be taken into account when considering items of
the selected -response variety. With this type of item, the optimal average
item difficulty is usually the midpoint between 1.00 and the chance
success proportion, defined as the probability of answering correctly by
random guessing. In a true -false item, the probability of guessing correctly
on the basis of chance alone is 1/2, or .50.
Therefore, the optimal item difficulty is halfway between .50 and 1.00, or
.75. In general, the midpoint representing the optimal item difficulty is
obtained by sum ming the chance success proportion and 1.00 and then
dividing the sum by 2, or
.50+1.00=1.5
1.5/2 =.75
For a five -option multiple -choice item, the probability of guessing
correctly on any one item on the basis of chance alone is equal to 1/5, or
20. The o ptimal item difficulty is therefore .
60: .20+1.00=1.20
1.20/2=.60
2.3.2 The Item -Reliability Index :
The item -reliability index provides an indication of the internal
consistency of a test; the higher this index, the greater the test’s internal
consistency . The index is equal to the product of the item -score standard
deviation (s) and the correlation (r) between the item score and the total
test score.
Factor analysis and inter -item consistency: A statistical tool useful in
determining whether items on a t est appear to be measuring the same
thing(s) is factor analysis. Through the judicious use of factor analysis,
items that do not “load on” the factor that they were written to tap (that is,
items that do not appear to be measuring what they were designed t o
measure) can be revised or eliminated. If too many items appear to be
tapping a particular area, the weakest of such items can be eliminated.
Additionally, factor analysis can be useful in the test interpretation
process, especially when comparing the co nstellation of responses to the
items from two or more groups. Thus, for example, if a particular
personality test is administered to two groups of hospitalised psychiatric
patients, each group with a different diagnosis, then the same items may
be found t o load on different factors in the two groups. Such information
will compel the responsible test developer to revise or eliminate certain munotes.in

Page 19


19 Schizophrenia And Other Psychotic Disorders - II items from the test or to describe the differential findings in the test
manual.
2.3.3 The Item -Validity Index :
The item-validity index is a statistic designed to provide an indication of
the degree to which a test is measuring what it purports to measure. The
higher the item -validity index, the greater the test’s criterion -related
validity. The item -validity index can be calculated once the following two
statistics are known:
• The item -score standard deviation
• The correlation between the item score and the criterion score
Calculating the item -validity index will be important when the test
developer’s goal is to max imize the criterion -related validity of the test. A
visual representation of the best items on the test (if the objective is to
maximize criterion -related validity) can be achieved by plotting each item -
validity index and item -reliability index.
2.3.4 The Item -Discrimination Index :
Measures of item discrimination indicate how adequately an item
separates or discriminates between high scorers and low scorers on an
entire test. In this context, a multiple -choice item on an achievement test is
a good item if most of the high scorers answer correctly and most of the
low scorers answer incorrectly. If most of the high scorers fail a particular
item, these test takers may be making an alternative interpretation of a
response intended to serve as a distracter. In such a case, the test
developers should interview the examinees to better understand the basis
for the choice and then approximately revise (or eliminate) the item.
Common sense dictates that an item on an achievement test is not doing its
job if it is ans wered correctly by respondents who least understand the
subject matter. Similarly, an item on a test purporting a particular
personality track is not doing its job if responses indicate that people who
score very low on the test as a whole (indicating that they are very high on
the trait in question, contrary to what the test as a whole indicates).
2.4 VALIDITY In everyday language, we say that something is valid if it is sound,
meaningful, or well -grounded on principles of evidence. For example, we
speak of a valid theory, a valid argument, or a valid reason. In legal
terminology, lawyers say that something is valid if it is “executed with the
proper formalities” (Black, 1979), such as a valid contract or a valid will.
In each of these instances, people ma ke judgements based on evidence of
the meaningfulness or veracity of something. Similarly, in the language of
psychological assessment, validity is a term used in conjunction with the
meaningfulness of a test score – What the test score truly means.
munotes.in

Page 20


Psychological Testing And Psychometrics Practicals
20 A tes t is considered valid for a particular purpose if it does, in fact,
measure what it purports to measure. Questions regarding a test’s validity
may focus on the items that collectively make up the test. Do the items
adequately sample the range of areas that must be sampled to adequately
measure the construct? Individual items will also come under scrutiny in
an investigation of a test’s validity. How do individual items contribute to
or detract from the test’s validity? The validity of a test may also be
questioned on grounds related to the interpretation of the resulting test
scores. What do these scores really tell us about the targeted construct?
How are high scores on the test related to the test -taker’s behavior? How
are low scores on the test related to the test -taker’s behavior? How do
scores on this test relate to scores on other tests purporting to measure the
same construct? How do scores on this test relate to scores on other tests
purporting to measure opposite types of constructs?
We might expect one person’s score on a valid test of introversion to be
inversely related to that same person’s score on a valid test of
extraversion; that is, the higher the introversion test score, the lower the
extraversion test score, and vice versa. Questions concer ning the validity
of a particular test may be raised at every stage in the life of the test. From
its initial development through the life of its use with members of different
populations, assessment professionals may raise questions regarding the
extent t o which a test is measuring what it purports to measure.
The concept of validity :
Validity, as applied to a test, is judgment or estimate of how well a test
measures what it purports to measure in a particular context. More
specifically, it is a judgement based on evidence about the appropriateness
of inferences drawn from test scores.
An inference is a logical result or deduction. Characterizations of the
validity of tests and test scores are frequently phrased in terms such as
“acceptable” or “weak”.Thes e terms reflect a judgement about how
adequately the test measures what it purports to measure.
Researchers have traditionally conceptualized validity according to three
categories:
1. Content validity
2. Criterion -related validity
3. Construct validity
Face validity :
Face validity relates more to what a test appears to measure to the person
being tested than to what the test actually measures. Face validity is a
judgement concerning how relevant the te st item appears to be. Stated
another way, if a test definitely appears to measure what it purports to
measure “on the face of it”, then it could be said to have high face validity. munotes.in

Page 21


21 Schizophrenia And Other Psychotic Disorders - II
A paper and pencil personality test labelled the Introversion /Extroversi on
Test, with items that ask respondents whether they have acted in an
introverted or extraverted way in particular situations, may be perceived
by respondents as a highly face valid test. On the other hand, a personality
test in which respondents are aske d to report what they see in inkblots may
be perceived as a test with low face validity. Many respondents would be
left wondering how what they said they saw in inkblots really had
anything at all to do with personality.
Content validity:
Content validity describes a judgement of how adequately a test samples
behaviours representative of the universe of behaviours that the test was
designed to sample. For example, the universe of behaviours referred to as
assertive is very wide -ranging. A content -valid pape r and pencil test of
assertiveness would be one that is adequately representative of this wide
range. We might expect that such a test would contain items sampling
from hypothetical situations at home (such as whether the respondent has
difficulty making h er or his views known to fellow family members), on
the job (such as whether the respondent has difficulty asking subordinates
to do what is required of them), and in situations (such as whether the
respondent would send back a steak not done to order in a fancy
restaurant).
Criterion -related validity:
Criterion -related validity is a judgment of how adequately a test score can
be used to infer an individual’s most probable standing on some measure
of interest - the measure of interest being the criterion. Tw o types of
validity evidence are subsumed under the heading criterion - related
validity.
Concurrent validity is an index of the degree to which the test score is
related to some criterion measure obtained at the same time
(concurrently). Predictive validit y is an index of the degree to which a test
score predicts some criterion measure. Before we discuss each of the
validity evidence in detail, it seems appropriate to raise an important
question.
Concurrent validity:
If test scores are obtained at about the same time that the criterion
measures are obtained, the measure of the relationship between the test
scores and the criterion provides evidence of concurrent validity.
Statements of concurrent validity indicate the extent to which test scores
may be used to estimate an individual’s present standing on a criterion. If,
for example, scores (or classifications) made on the basis of a psycho
diagnostic test were to be validated against a criterion of already
diagnosed psychiatric patients, then the process wou ld be one of
concurrent validation. In general, once the validity of the inference from munotes.in

Page 22


Psychological Testing And Psychometrics Practicals
22 the test scores is established, the test may provide a faster, less expensive
way to offer a diagnosis or a classification decision. A test with
satisfactorily demonst rated concurrent validity may therefore be appealing
to prospective users because it holds out the potential for savings in both
money and professional time.
Predictive validity:
Test scores may be obtained at one time, and the criterion measures
obtained at a later time, usually after some intervening event has taken
place. The intervening event may take varied forms, such as training,
experience, therapy, medication, or simply the passage of time. Measures
of the relationship between the test scores and a criterion measure
obtained at a later time provide an indication of the predictive validity of
the test; that is, how accurately scores on the test predict some criterion
measure. For example, measures of the relationship between college
admissions tests and freshman grade point averages, provide evidence of
the predictive validity of the admissions tests.
Construct validity:
Construct Validity is a judgement about the appropriateness of inferences
drawn from test scores regarding individual standings on a variable called
a construct. A construct is an informed, scientific idea developed or
hypothesised to describe or explain behavior. Intelligence is a construct
that may be invoked to describe why a student performs well in school.
Anxiety is a construct t hat may be invoked to describe why a psychiatric
patient paces the floor. Other examples of constructs are job satisfaction,
personality, bigotry, clerical aptitude, depression, motivation, self -esteem,
emotional adjustment, potential dangerousness, creati vity, and mechanical
comprehension, to name but a few.
Constructs are unobservable, presupposed (underlying) traits that a test
developer may invoke to describe test behavior or criterion performance.
The researcher investigating test construct validity mu st formulate
hypotheses about the expected behavior of high scores and low scores on
the test. The hypotheses give rise to a tentative theory about the nature of
the construct the test was designed to measure. If the test is a valid
measure of construct, t hen high scores and low scores will behave as
predicted in the theory. If high scores and low scores do not behave as
predicted by the theory, the investigator will need to re -examine the nature
of the construct itself or the hypotheses made about it. One possible reason
for obtaining results contrary to those predicted by the theory is that the
test simply does not measure the construct.
2.5 RELIABILITY A good test or, more generally, a good measuring tool or procedure is
reliable. The criterion of reliabi lity involves the consistency of the
measuring tool: the precision with which the test measures and the extent munotes.in

Page 23


23 Schizophrenia And Other Psychotic Disorders - II to which error is present in measurements. In theory, the perfectly reliable
measuring tool consistently measures the same way.
Whenever we are a dministering any test, we want to be reasonably certain
that the measuring tool or test that we are using is consistent; that is, we
want to know that it yields the same numerical measurement every time it
measures the same thing under the same conditions. Psychological tests,
like other tests and instruments, are reliable to varying degrees. As you
might expect, however, reliability is a necessary but not sufficient element
of a good test. In addition to being reliable, tests must be reasonably
accurate. I n the language of psychometrics, a test must be valid.
Reliability refers to consistency in measurement. It is a synonym for
dependability/consistency. Due to variation and subjectivity of scoring,
individual scores and average group scores always reflect x amount of
measurement error.
There are two important features of reliability:
• Consistency
• Dependability
Observed score, True score, Error :
A score on an ability test is not only the test taker’s true score on the
ability to be measured but also the test taker's error. The error refers to the
component of the observed test score that has nothing to do with the test
taker’s ability. If we use X to represent an observed score, it equals the
true score plus error. It may be expressed as follows:
•X=T+E
Sources of Error :
• Test construction
• Test administration
• Test scoring and interpretation
• Other sources of error
Reliability estimates :
Test-Retest Reliability Estimates :
Test-retest reliability evaluates reliability across time. Reliability can v ary
with the many factors that affect how a person responds to the test,
including their mood, interruptions, time of day, etc. A good test will
largely cope with such factors and give relatively little variation. An
unreliable test is highly sensitive to such factors and will give widely
varying results, even if the person re -takes the same test half an hour later. munotes.in

Page 24


Psychological Testing And Psychometrics Practicals
24 The longer the delay between tests, the greater the likely variation. Better
tests will give less retest variation with longer delays. The prob lem with
test-retest is that people may have learned something and that the second
test is likely to give different results. This method is particularly used in
experiments.
Parallel and Alternate Forms :
Parallel -form reliability evaluates different quest ions and question sets that
seek to assess the same construct. Parallel forms of a test exist, and for
each form of the test, the means are equal. In theory, the means of scores
obtained on parallel forms correlate equally with the true score. More
practic ally, scores obtained on parallel tests correlate equally with other
measures.
Alternate forms :
Alternate forms are simply different versions of a test that have been
constructed so as to be parallel. Although they do not meet the
requirements for the leg itimate designation “parallel”, alternate forms of a
test are typically designed to be equivalent with respect to variables such
as content and level of difficulty. Some examples are GED, GRE, SAT.
Split -Half Reliability Estimates :
An estimate of split -half reliability is obtained by correlating two pairs of
scores obtained from equivalent halves of a single test administered once.
It is a useful measure of reliability when it is impractical or undesirable to
assess reliability with two tests or to adminis ter a test twice (because of
factors such as time or expense). The computation of a coefficient of split -
half reliability generally entails three steps:
Step 1. Divide the test into equivalent halves.
Step 2. Calculate a Pearson r between scores on the t wo halves of the
test.
Step 3. Adjust the half -test reliability using the Spearman -Brown
formula.
2.6 NORMS Norm -referenced testing and assessment can be defined as a method of
evaluation and a way of deriving meaning from test scores by evaluating
an ind ividual test -takers’ score and comparing it to the scores of a group
of test -takers. In this approach, the meaning of an individual test score is
understood relative to other scores on the same test. A common goal of a
norm -referenced test is to yield info rmation on a test -taker’s standing or
ranking relative to some comparison group of other test -takers.
Norm is the singular and is used in the scholarly literature to refer to
behavior that is usual, average, normal, standard, expected, or typical.
Referenc e to a particular variety of norms may be specified by means of munotes.in

Page 25


25 Schizophrenia And Other Psychotic Disorders - II modifiers such as age, as in the term age norm. Norms is the plural form
of norm, as in the term gender norms. In a psychometric context, norms
are the test performance data of a particular gr oup of test -takers that are
designed for use as a reference when evaluating or interpreting individual
test scores. As used in this definition, the “particular group of test -takers”
may be defined broadly (for example, “a sample representative of the adult
population of India”) or narrowly (for example, “female inpatients at the
Sion Hospital with a primary diagnosis of depression”). A normative
sample is a group of people whose performance on a particular test is
analysed for reference in evaluating the pe rformance of individual test -
takers.
Usually, members of the normative sample will all be typical with respect
to some characteristic(s) of the people for whom the particular test was
designed. A test administered to this representative sample of test -takers
yields a distribution (or distributions) of scores. These data constitute the
norms for the test and are typically used as a reference source for
evaluating and placing into context test scores obtained by individual test -
takers. The data may be in the form of raw scores or converted scores.
The word norm, as well as related terms such as norming, refer to the
process of deriving norms. Norming may be modified to describe a
particular type of norm derivation. For example, race norming is the
controversia l practise of norming on the basis of race or ethnic
background.
Norming a test, especially with the participation of a nationally
representative normative sample, can be a very expensive proposition. For
this reason, some test manuals provide wha t are variously known as user
norms or program norms, which “consist of descriptive statistics based on
a group of test -takers in a given period of time rather than norms obtained
by formal sampling methods” (Nelson, 1994).
Types of Norms :
• Percentile
• Age norms
• Grade norms
• National norms
• National anchor norms
• Sub-group norms
• Local norms
Norm -referenced versus criterion -referenced valuation :
One way to derive meaning from a test score is to evaluate the test in
relation to other scores on the s ame test. This approach to evaluation is
referred to as norm -refer. Another way to derive meaning from a test score munotes.in

Page 26


Psychological Testing And Psychometrics Practicals
26 is to evaluate it on the basis of whether or not some criterion has been met.
A criterion may be defined as a standard on which a judgement or decision
may be based. Criterion -referenced testing and assessment may be defined
as a method of evaluation and a way of deriving meaning from test scores
by evaluating an individual’s score with reference to a set standard. Some
examples:
• To be elig ible for a high school diploma, students must demonstrate at
least a sixth -grade reading level.
• To earn the privilege of driving an automobile, would -be drivers must
take a road test and demonstrate their driving skills to the satisfaction
of the state -appointed examiner.
• To be licenced as a psychologist, the applicant must achieve a score
that meets or exceeds the score mandated by the state on the licencing
test.
2.7 ETHICAL ISSUES IN PSYCHOLOGICAL TESTING Concern about the use of psychological tests first became widespread in
the aftermath of World War I, when various professionals (as well as non -
professionals) sought to adapt group tests developed by the military for
civilian use in schools and industry. Reflecting growing public discomfort
with a l ot of the assessment industry were popular magazine articles
featuring stories with titles such as “The Abuse of Tests” (Haney, 1981).
Less well -known were voices of reason that offered constructive ways to
correct what was wrong with assessment practises.
In the USA, Congress passed the National Defense Education Act, which
provided federal money to local schools for the purpose of testing ability
and aptitude to identify gifted and academically talented students. This
event triggered a large -scale testing programs in the schools. At the same
time, the use of ability tests and personality tests for personnel selection
increased in government, the military, and business.
Laws are rules that individuals must obey for the good of society as a
whole. Whereas et hics is a body of principles of right, proper, or good
conduct, for example, a principle of ethical research is that the researcher
should never fudge data; all data must be reported accurately.
A code of professional ethics is recognised and accepted by m embers of a
profession; it defines the standard of care expected of members of that
profession. In this context, we may define standard of care as the level at
which an average, reasonable, and prudent professional would provide
diagnostic or therapeutic s ervices under the same or similar conditions.
Let us discuss a few points in this regard:
Test-user qualifications:
Should just anyone be allowed to purchase and use psychological test
materials? If not, then who should be permitted to use psychological t ests? munotes.in

Page 27


27 Schizophrenia And Other Psychotic Disorders - II As early as 1950, the APA Committee on Ethical Standards for
Psychology published a report called Ethical Standards for the
Distribution of Psychological Tests and Diagnostic Aids. This report
defined certain levels of tests in terms of the degree to which the tests use
required knowledge of testing and psychology.
Testing people with disabilities:
Challenges analogous to those concerning test -takers from linguistic and
cultural minorities are present when testing people with disabling
conditions. Sp ecifically, these challenges may include (1) transforming the
test into a form that can be taken by the test -taker, (2) transforming the
responses of the test -taker so that they are scoreable, and (3) meaningfully
interpreting the test data.
Another comple x issue —this one ethically charged —has to do with a
request by a terminally ill individual for assistance in quickening the
process of dying. In Oregon, the first state to enact “Death with Dignity”
legislation, a request for assistance in dying may be gra nted only
contingent on the findings of a psychological evaluation; life or death
literally hangs in the balance of such assessments.
The right of informed consent:
Test-takers have a right to know why they are being evaluated, how the
test data will be used, and what (if any) information will be released to
whom. With full knowledge of such information, test -takers give their
informed consent to being tested. The disclosure of the information
needed for consent must be in a language the test -taker can un derstand.
Test-takers have a right to be informed, in a language they can understand,
of the nature of the findings with respect to a test they have taken. They
are also entitled to know what recommendations are being made as a
consequence of the test data . If the test results, findings, or
recommendations made on the basis of test data are voided for any reason
(such as irregularities in the test administration), test -takers have a right to
know that.
The right to privacy and confidentiality:
State statu tes have extended the concept of privileged information and
confidentiality to parties who communicate with each other in the context
of certain relationships, including the lawyer -client relationship, the
doctor -patient relationship, the priest –penitent r elationship, and the
husband -wife relationship. In most states, privilege is also accorded to the
psychologist –client relationship. Professionals such as psychologists who
are parties to such special relationships have a legal and ethical duty to
keep thei r clients’ communications confidential.
In short, you should remember the following points in relation to ethical
issues related to psychological testing:
• Informed consent munotes.in

Page 28


Psychological Testing And Psychometrics Practicals
28 • Confidentiality
• Competence
• Integrity
• Professional and scientific responsib ility
• Respect for people's rights and dignity
• Concern for others' welfare
• Social responsibility
2.8 SUMMARY The creation of a good test is not a matter of chance. It is the product of
the thoughtful and sound application of established principles of test
construction. In this chapter, you studied the basics of test development
and examined in detail the processes by which tests are constructed. A
number of techniques designed for the construction and selection of good
items were explored.
The process of developing a test goes through five stages: test
conceptualization, test construction, test tryouts, item analysis, and test
revision.
Once the idea for a test is conceived (test conceptualization), items for the
test are drafted (test construction). T he first draft of the test is then tried
out on a group of sample test -takers (test tryouts). Once the data from the
tryout are collected, the test -takers performance on the test as a whole and
on each item is analyzed. Statistical procedures, referred to as item
analysis, are employed to assist in making judgements about which items
are good as they are, which items need to be revised, and which items
should be discarded. The analysis of the tests items may include analyses
of item reliability, item validi ty, and item discrimination.
After completing the above steps, the researcher has to check the test for
validity and reliability. In psychological assessment, validity is a term
used in conjunction with the meaningfulness of a test score – what the test
score truly means. Validity is of three types: content validity, construct
validity, and criterion -related validity. A good test or, more generally, a
good measuring tool or procedure is reliable. The criterion of reliability
involves the consistency of the measuring tool: the precision with which
the test measures and the extent to which error is present in measurements.
In theory, the perfectly reliable measuring tool consistently measures the
same way. There are methods to check for test reliability, such as test -
retest reliability, split -half reliability, parallel form reliability, etc.
Norm -referenced testing and assessment can be defined as a method of
evaluation and a way of deriving meaning from test scores by evaluating
an individual test -takers’ scor e and comparing it to the scores of a group
of test -takers. In this approach, the meaning of an individual test score is munotes.in

Page 29


29 Schizophrenia And Other Psychotic Disorders - II understood relative to other scores on the same test. A common goal of a
norm -referenced test is to yield information on a test -taker’s standing or
ranking relative to some comparison group of other testakers.
Concern about the use of psychological tests first became widespread in
the aftermath of World War I, when various professionals (as well as non -
professionals) sought to adapt grou p tests developed by the military for
civilian use in schools and industry. Reflecting growing public discomfort
with a lot of the assessment industry were popular magazine articles
featuring stories with titles such as “The Abuse of Tests” (Haney, 1981).
The committee on Ethical Standards for Psychology published a report
called Ethical Standards for the Distribution of Psychological Tests and
Diagnostic Aids. This report defined a few levels of tests in terms of the
degree to which the tests use required knowledge of testing and
psychology.
2.9 QUESTIONS 1. Write a note on test conceptualization and some related questions
related to test conceptualization.
2. Discuss item analysis and elaborate on item difficulty, item validity,
item reliability, and the item discrimination index.
3. What ethical measures will you take as a counsellor while conducting
a psychological test?
2.10 REFERENCES  Essentials of Psychological Testing by Susana Urbina (2004).
Published by John Wiley & Sons, Inc., Hoboken, New Jerse y
 Psychological Testing and Assessment: An Introduction to Tests and
Measurement (2018) by Ronal Jay Cohen and Mark E. Swerdlik.
Ninth Ed.
 Psychological Testing by Anne Anastasi (1976). Fourth Ed. Published
by MacMillan Publishing co., Inc. New York

*****




munotes.in

Page 30

30 3
TEST ADMINISTRATION AND
REPORTING – I
Unit Structure
3.0 Objectives
3.1 Introduction: Locus of Control Scale
3.1.1 Purpose
3.2 Standardization of Norms
3.3 Item Analysis, Validity, and Reliability
3.4 Administration and Scoring
3.5 Interpretation and Reporting
3.6 Summary
3.7 Questions
3.8 References
3.9 Appendix
3.0 OBJECTIVES  To learn about the Locus of Control (LOC) Scale by J. B. Rotter.
 To know how to administer, score, interpret and report the LOC
Scale
 To know its psychometric properties – item analysis, reliability and
validity
3.1 INTRODUCTION: LOCUS OF CONTROL SCALE In Rotter’s own words, locus of control is the degree to which an
individual perceives that a reward follows from or is contingent upon their
own behaviour or attributes, v ersus the degree to which they feel that the
reward is controlled by the forces outside of him or herself that occur
independently of his or her actions (Rotter, 1966). In simple words, locus
of control indicates one’s belief regarding whether the reward o ne receives
is or is not dependent on his or her own behaviour, that is, whether the
reward is or is not a result of their own behaviour.
In this unit, we will study the background and description of the Locus of
Control (LoC) scale in brief in this secti on. In the subsequent sections, we
will also learn many other details of the scale, such as its administration,
scoring, reporting, and its psychometric properties.
J. B. Rotter proposed social learning theory, which integrated learning
theory and personal ity theory. According to him, the effects of reward or
reinforcement on preceding behaviour depend partly on whether the munotes.in

Page 31


31 Test Administration And Reporting – I person perceives the reward as dependent on his or her behaviour or
independent of it. Thus, attainment and performance differ in situa tions
when situations are perceived as determined by skill versus chance. For
example, if someone believes that the reward is a result of his or her own
behaviour and skill, he or she will work hard and strive to be successful in
his or her field. Similarl y, if someone believes that the reward one receives
is merely a part of luck or chance, his or her performance will be different
than the person who believes the reward is a result of hard work.
In line with this, Rotter stated that persons may also diffe r in generalized
expectancies for internal versus external control of reinforcement. Thus,
locus of control is more commonly a known form of the concept of
generalized expectancies for control of reinforcement proposed by Rotter.
With reference to control of reinforcement, locus of control refers to
people’s very general, cross -situational beliefs about what determines
whether or not they get reinforced in life.
People who have an internal locus of control believe that they can exercise
control over events in their life and that outcomes are determined by their
own effort and abilities. On the other hand, people who have an external
locus of control, believe that their behaviour or decision -making does not
have much impact, rather things are controlled by e xternal forces, such as
fate, chance, or powerful others.
Reinforcement, reward or gratification, all play an important role in the
locus of control. That is, the same event may be regarded as a reward by
some people, while others may perceive and react t o it differently.
According to Rotter, whether the event will be regarded as a reward, will
be determined by the degree to which the individuals perceive that the
reward follows from, or is dependent on their behaviour or attributes
versus the degree to wh ich they feel that the reward is controlled by forces
outside of themselves and may occur independently of their own actions.
When individuals perceive reinforcement as following their own action, it
is typically perceived as the result of luck, chance, or fate, as under the
control of others, or as unpredictable because of the great complexity of
the forces surrounding them.
Here, the locus of control comes into the picture, which depends on the
individuals’ perception of whether the event is dependent or not upon their
own behaviour or their own relatively permanent characteristics. In other
words, if the event is perceived by individuals to be dependent on their
own behaviour, it is known to be a belief in internal control. On the other
hand, if the even t is perceived as not being dependent on individuals’
behaviour, it is known to be a belief in external control.
A Brief History of Locus of Control:
Rotter considers the social upheaval of the 1900s, such as the Vietnam
War, Watergate, the inner -city riot s, and political assassinations as
responsible incidents as the ones which might have played some role in
the interest in locus of control. The reason for this is that these incidents
were themselves very disturbing. At the same time, they were also munotes.in

Page 32


Psychological Testing And Psychometrics Practicals
32 concer ning many people including social scientists, because of the
perceived lack of control over their own lives. Hence, Rotter believes that
this social upheaval might have led to the interest in the locus of control.
Four Propositions and Locus of Control
Rotter (1990) in his article “Internal versus external control of
reinforcement: A case history of a variable” discussed the four
propositions that he believed as being responsible for the heuristic value of
internal -external control. Rotter also believed tha t these propositions are
particularly relevant to the field of personality theory, personality
measurement, and the study of psychology as a whole. These four
propositions are listed below with their descriptions in brief:
1) The importance of precise defi nition:
This first proposition is that the heuristic value of a construct is partially
dependent on the precision of its definition.
Rotter (1990) suggests here the need for a good definition, especially of a
cognitive or subjective variable, which must be stated in careful and
precise language and leads to a common understanding. According to him,
it needs to be illustrated with many behavioural examples of its
consequences if its presence or absence is not directly observable. The
way they are stated shou ld make the operations for its measurement clear
and they should be widely accepted as logical and reasonable. Rotter
further suggested that even precise definitions should usually and
necessarily distinguish between the construct being defined and other
constructs used in past and present with which it can be confused. Also
these precise definitions should make the connections to other constructs
clear, so that previously collected data can be interpreted and built on.
2) The importance of imbedding a cons truct in a broader theory:
The second proposition is that the heuristic value of a construct is
considerably enhanced if it is imbedded in a broader theory of behaviour.
Here, Rotter (1990) underlines the importance of recognizing the conept
originated bot h from theoretical and clinical concerns, with social learning
theory which organizes our thinking in both cases.
3) Measurement principles should be derived from psychological
theory:
The third proposition is that the predictive value of a test is likely to be
increased if the principles of measurement are derived from the same
theory as the constructs to be measured. Rotter (1990) emphasized the
need of having a theory of behaviour, and consequently, of test -taking
behaviour, as well as some notions of th e theoretical properties of the
variable being studied in order to devise a construct valid measure.

munotes.in

Page 33


33 Test Administration And Reporting – I 4) The dissemination of knowledge:
The fourth proposition is that the research monograph is an ideal form of
publication for the dissemination of knowledge . According to Rotter
(1990), psychology, in order to advance in understanding human
behaviour, needs to emphasize programmatic research (whether theoretical
or applied), in which theory and empirical findings are combined. It also
needs to build on past r esearch.
Description of the Locus of Control Scale:
The Locus of Control Scale was originally developed by Julian. B. Rotter
(1916 -2014). It is one of the widely used personality tests, which has been
translated into over 40 languages. The Locus of Cont rol Scale, which was
referred to as the I -E Scale by Rotter, is a 29 -item test, a final version that
measures whether an individual has an internal or external locus of
control. In other words, it measures the degree to which the individual
interprets even ts as being a result of their own actions or external factors.
It is a forced -choice questionnaire and respondents must select a response
choice that provides a specific answer to each item based on his or her
own belief about the statements in the scale. It can be administered on an
individual or even in a group setting.
Each of the 29 items consists of a pair of statements ‘a’ and ‘b’. A careful
reading of the items makes it clear that they exclusively deal with the
respondents’ belief about the nature of the world. In other words, the test
items are concerned with the respondents’ expectations about how
reinforcement in terms of reward or punishment is controlled.
Consequently, this test is considered to be a measure of generalized
expectancy. It may corr elate with the value that the respondent places on
internal control. However, none of the items is directly addressed to the
preferences for internal or external control.
Respondents must select the statement from each of the 29 pairs to which
they agree t he most and write ‘a’ or ‘b’ accordingly in the blank space
provided. The locus of control scale also contains six filler items (1, 8, 14,
19, 24, 27) which maintain the ambiguity of the test purpose. Table 3.1
presents a few items of Rotter’s Locus of Con trol Scale. The
administration and scoring procedure of the test has been explained in
Sections 3.2 and 3.3, respectively.
Table 3.1 Items of Locus of Control Scale Sr. No. Items Response 1. a) Children get into trouble because their parents punish them too much. b) The trouble with most children nowadays is that their parents are too easy with them. 2. a) Many of the unhappy things in people’s lives are partly due to a bad luck. munotes.in

Page 34


Psychological Testing And Psychometrics Practicals
34 b) People’s misfortunes result from the mistakes they make. 5. a) The idea that teachers are unfair to students is nonsense. b) Most students don’t realize the extent to which their grades are influenced by accidental happenings. 8. a) Heredity plays the major role in determining one’s personality. b) It is one’s experiences in life which determine what they are like. 10. a) In the case of the well -prepared student, there is
rarely if ever such a thing as an unfair test.
b) Many times exam questions tend to be so
unrelated to course work that studying is really
useless. 19. a) One should always be willing to admit
mistakes.
b) It is usually best to cover up one’s mistakes. 22. a) With enough effort, we can wipe out political
corruption.
b) It is difficult for people to have much control
over the things po liticians do in office. 25. a) Many times I feel that I have little influence over the things that happen to me. b) It is impossible for me to believe that chance or luck plays an important role in my life.
{Source: Rotter, J. B. (1966). Generalized expectancies for internal versus
external locus of control of reinforcement. Psychological Monographs:
General and applied, Whole No. 609, 80(1), 1 -28.}
3.1.1 Purpose:
To find out the details of personality aspect in terms of locus of control –
that is, the extent of control one perceives to have over the situations in
life.
3.2 STANDARDIZATION OF NORMS The locus of control scale has been widely tested on various population
samples, which includes elementary psychology students from Ohio State
University, Kansas State University, University of Connecticut National
stratified sample of Purdue opinion poll of 10th, 11th, and 12th grades,
prisoners from Colorado reformatory, Ohio Federal prisoners aged 18 to
26 years from 8th grade plus reading, Peace corps t rainees, Negro students
of psychology classes from Florida State University, 18 -year-old subjects
from Boston area. Most of the work reported by Rotter was completed at
the Ohio State University. munotes.in

Page 35


35 Test Administration And Reporting – I 3.3 ITEM ANALYSIS, VALIDITY, AND RELIABILITY Item Analysis and Validity:
This 29 -item Locus of Control Scale has been derived from an item
analysis of two previous versions of the scale. The earliest version of the
scale was developed by Late Shephard Liverant in association with J. B.
Rotter and M. Seeman by deve loping the subscales for different areas,
such as achievement, affection, and general social and political attitudes;
and control for social desirability. It consisted of 100 forced -choice items
and each item compared an external belief with an internal be lief. Later,
Liverant conducted an item analysis of this 100 -item scale and reduced it
to a 60 -item version based on internal consistency criteria.
Later, item analysis of this 60 -item version scale was carried out which
indicated that the subscales were not generating separate predictions. Also,
achievement items tended to correlate highly with the Marlowe -Crowne
Social Desirability Scale (Crowne & Marlowe, 1964), while some
subscales correlated with other scales at approximately the same level as
their i nternal consistency. As a result, items to measure more specific
subareas of internal -external control were discarded. Item correlations of
this test with the social desirability scale for different samples were
deemed to be very high, ranging from .35 to .40. This 60 -item scale was
then reduced and purified by S. Liverant, J. B. Rotter, and D. Crowne for
which validity data along with internal consistency data from two studies
were used. Also, some items were reframed with the changes in their
wording to m ake the items appropriate for non -college adults and upper -
level high school students in this final revision.
This scale was later reduced to 23 items by eliminating items either with a
high correlation with the Marlowe -Crowne Social Desirability scale, a
non-significant relationship with other items, or a correlation approaching
zero with both validation criteria. And lastly, a final version of the scale
was developed as a 29 -item, forced -choice test with 6 filler items
intending to make the purpose of the test somewhat more ambiguous.
Internal consistency estimates of the scale are relatively stable. These
estimates are only moderately high for a scale of this length (i.e., 29 -item
scale). However, Rotter (1966) suggested that it should be remembered
that the items of the scale are not arranged in a difficulty hierarchy, but
they are the samples of attitudes in a wide variety of different situations.
Reliability:
This test is an additive which consists of items that are not comparable.
That is why split -half or matched -half reliability (.65 for males, .79 for
females, and .73 for total sample) tends to underestimate the internal
consistency. Also, this test is a forced -choice scale in which an attempt is
made to balance alternatives, so that probabilities o f endorsement of either
alternative do not include the more extreme splits. Therefore, the Kuder -
Richardson reliabilities are somewhat limited in two samples of munotes.in

Page 36


Psychological Testing And Psychometrics Practicals
36 Elementary Psychology students from Ohio State University (.70 for
males from each of the two s amples, .76 and .70 for females, and .73 and
.70 for combined sample, that is, male -female together). The Kuder -
Richardson reliability was .69 for the combined sample of males and
females from the National stratified sample (Franklin, 1963).
Test-retest re liability in two different samples (Elementary psychology
students from Ohio State University and Prisoners from Colorado
Reformatory) was consistent (.60 and .78 for males) for 1 month period. It
was .83 for females and .72 for combined in one of the samp les. On the
other hand, there were lower test -retest reliabilities (.49 for males, .61 for
females, and .55 for combined) for 2 month period, probably due to the
types of test administration – first as group administration and second as
individual administ ration. The correlation for this 29 -item scale ranged
from -.07 to -.35.
3.4 ADMINISTRATION AND SCORING (Note: Sections 3.4 and 3.5 should be reported in the past tense while
writing in the journal as a past activity conducted in the psychology
laboratory. )
3.2.1 Tools and Material:
• Locus of Control (LOC) Scale with Answer/Response sheet
• Stationery
3.2.2 Procedure:
The test administrator requires ensure all arrangements for administering
the test. Then the test taker/participant is taken to the laborat ory and is
asked to sit comfortably. Initial general instructions are given to the test
taker as follows for rapport building before presenting a Locus of Control
Scale, along with a few general questions if required:
“Please be comfortable. I will be pres enting scale you with a
psychological scale, which requires approximately 5 to 10 minutes to
complete. This will help me understand your views in general. I’ll be
giving you instructions for completing the scale once presented”.
A participant then is provi ded with the answer sheet to record his/ her
responses to 29 pairs of statements in the Locus of Control Scale and a
pencil. The following standard instructions are as follows as provided by
the author J. B. Rotter (1966) in his article “Generalized Expect ancies for
Internal versus External Control of Reinforcement” to be given to
individuals:
“This is a questionnaire to find out the way in which certain important
events in our society affect different people. Each item consists of a pair of
alternatives le ttered a or b. Please select the one statement of each pair
(and only one) which you more strongly believe to be more true rather
than the one you think you should choose or the one you would like to be munotes.in

Page 37


37 Test Administration And Reporting – I true. This is a measure of personal belief, obviously there are no right or
wrong answers.
Your answers to the items on this inventory are to be recorded on a
separate answer sheet which is loosely inserted in the booklet. REMOVE
THIS ANSWER SHEET NOW. Print/Write your name and any other
information request ed by the examiner on the answer sheet, then finish
reading these directions. Do not open the booklet until you are told to do
so.
Please answer these items carefully, but do not spend too much time on
any one item. Be sure to find an answer for every choi ce. Find the number
of the item on the answer sheet and blacken the space under the number 1
or 2 which you choose as the statement more true.
In some instances, you may discover that you believe both statements or
neither one. In such cases, be sure to se lect the one you more strongly
believe to be the case as far as you are concerned. Also, try to respond to
each item independently when making your choice; do not be influenced
by your previous choices.”
After completing the instruction part, the test admi nistrator says, “Have
you understood? Shall we begin?” and makes sure that the participant has
understood all the instructions, has no difficulty or query regarding it and
is ready to start the test. He or she is allowed to start responding to test
items.
When the participant finishes the task, the test administrator makes sure
that the participant has responded to all test items. If any item has been left
without response by any chance, the test administrator requests the test
taker to respond to that par ticular item/s and complete the test.
Once the participant completes the test, the test administrator asks a few
questions to the participant regarding the scale. They are as follows:
1) How was the test?
2) Was that easy for you to respond to the test ite ms?
3) What came to your mind while completing the test?
4) What may be the purpose of the test, according to you?
Apart from these post -task questions, other relevant questions may be
asked to the participant. Thus, the participant is encouraged to expres s
his/her thoughts, feelings, and views, if any, regarding the task/test. The
test taker is then requested to wait outside for some time till the individual
test score is obtained.
3.2.3 Scoring:
The responses on the Locus of Control Scale are to be mea sured with the
help of the scoring key. The scoring key indicates the scores as 0 for some
responses and 1 for some responses. After completion of the test, out of 29 munotes.in

Page 38


Psychological Testing And Psychometrics Practicals
38 items responded to by the individuals, all items (except filler items) are
scored either as 0 or 1 using the scoring key. The responses for the filler
items are not scored at all. Accordingly, some responses are scored as 1
and some are scored as 0. Then, all scores are summed up to obtain the
total score. Total scores on the scale range from 0 to 13, excluding the
filler items, which are not scored. where lower scores indicate an internal
locus of control, while higher scores indicate the external locus of control.
3.5 INTERPRETATION AND REPORTING Interpretation and reporting the scores and results of the test should always
be done properly and in sensitive manner.
3.3.2 Interpretation of the Scores of LOC:
The higher scores reflect the external locus of control, while the lower
scores indicate the internal locus of control. The results are r eported and
communicated to the person accordingly in very sensitive manner for
which the test administrator must be having a knowledge of the test, its
nature and the interpretation of the test scores (high or low).
3.3.3 Reporting the Results of LOC:
The LOC gives an overall score of the test, which reflects whether the
person has internal or external locus of control. The test results should be
reported as below:
The participant’s score on the LOC test was ___, which indicates _____
(internal or external ) locus of control. That is, it shows that the participant
believes that the control of the events occurring in his or her life and
around him or is ____ (inside/outside) himself or herself. He or she
attributes factors, such as ________________________ as the reason for
the resulting events. Also, he or she believes that the reward or
punishment that he or she receives are/are not dependent on his or her
behaviour.
The same example can be elaborated as below for clear idea about
reporting the results:
The participant’s score on the LOC was 4, which indicates that the
participant has internal locus of control. That is, it shows that the
participant believes that the control of the events occurring in her life and
around him or her is inside herself. She attr ibutes the factors, such as
efforts, hard work, and other such internal factors as the reason for the
resulting events and only these factors are responsible for the reward or
punishment that she receives. She does not believe in external factors, like
luck, chance, fate. She believes that such external factors have no role in
her life. The reward or punishment that she receives are merely dependent
on her own behaviour.
Thus, the interpretation and reporting should be done in very careful
manner. munotes.in

Page 39


39 Test Administration And Reporting – I 3.6 SUMMA RY In this unit, we learned about the Locus of Control Scale which was
developed by Julian. B. Rotter. It is one of the widely used personality
tests. We learned about its history in brief, four propositions on which it is
based, and its description and pu rpose of this unit. We also had a glance
on some test items to understand the nature of the test and its items. We
learned about its standardization of norms in brief, that is the various
sample populations on which the test was standardized. We learned ab out
the psychometric properties of the test, that is item analysis, validity and
reliability. Then finally we moved towards the practical part of the test,
that is administration, scoring, interpretation and reporting the test results
at the end.
3.7QUEST IONS 1. Describe the concept of Locus of Control with the help of suitable
examples.
2. Describe the procedure of administering and scoring LOC.
3. Write short notes on:
(a) Internal and external locus of control
(b) Social learning theory and locus of con trol
(c) Four propositions and locus of control
(d) Interpretation and reporting LOC results
3.8 REFERENCES  Rotter, J. B. (1966). Generalized expectancies for internal versus
external locus of control of reinforcement. Psychological
Monographs: General and applied, Whole No. 609, 80(1), 1 -28.
 Mearns, J. (2021). The social learning theory of Julian B. Rotter
(1916 -2014). Available at
http://psych.fullerton.edu/jmearns/rotter.htm
 CES. (). Locus of Control Scale. Retrieved from
https://effectiveservices.forc e.com/s/measure/a007R00000v8Qg2QAE
/locus -of-control -scale
 Rotter, J. B. (1990). Internal versus external control of reinforcement:
A case history of a variable. American Psychologist, 45(4),489 -493.


munotes.in

Page 40


Psychological Testing And Psychometrics Practicals
40 3.9 APPENDIX Table 3.1 Items of Locus of Control Scal e Sr. No. Items Response 1. a) Children get into trouble because their parents punish them too much. b) The trouble with most children nowadays is that their parents are too easy with them. 2. a) Many of the unhappy things in people’s lives are partly due to a bad luck. b) People’s misfortunes result from the mistakes they make. 3. a) One of the major reasons why we have wars is because people
don’t take enough interest in politics.
b) There will always be wars, no matter how hard people try to
prevent them. 4. a) In the long run people get the respect they deserve in this
world.
b) Unfortunately, an individual’s worth often passes unrecognized
no matter how hard he tries. 5. a) The idea that teachers are unfair to students is nonsense. b) Most students don’t realize the extent to which their grades are influenced by accidental happenings. 6. a) Without the right breaks one cannot be an effective leader. b) Capable people who fail to become leaders have not taken advantage of their opportunities. 7. a) No matter how hard you try some people just don’t like you. b) People who can’t get others to like them don’t understand how to get along with others. 8. a) Heredity plays the major role in determining one’s personality. b) It is one’s experiences in life which determine what they are like. 9. a) I have often found that what is going to happen will happen. b) Trusting to fate has never trued out as well as for me as making a decision to take a definite course of action. 10. a) In the case of the well-prepared student, there is rarely if ever such a thing as an unfair test. b) Many times exam questions tend to be so unrelated to course work that studying is really useless. 11. a) Becoming a success is a matter of hard work, luck has little or nothing to do with it. b) Getting a good job depends mainly on being in the right place at the right time. 12. a) The average citizens can have an influence in government decisions. munotes.in

Page 41


41 Test Administration And Reporting – I b) This world is run by the few people in power, and there is not much the little guy can do about it. 13. a) When I make plans, I am almost certain that I can make them work. b) It is not always wise to plan too far ahead because many things turn out to be a matter of good or bad fortune anyhow. 14. a) There are certain people who are just no good. b) There is some good in everybody. 15. a) In my case, getting what I want has little or nothing to do with luck. b) Many times we might just as well decide what to do by flipping a coin. 16. a) Who gets to be the boss often depends on who was lucky enough to be in the right place first. b) Getting people to do the right thing depends upon ability, luck has little or nothing to do with it. 17. a) As far as world affairs are concerned, most of u are the victims of forces we can neither understand, nor control. b) By taking an active part in political and social affairs the people can control world events. 18. a) Most people don’t realize the extent to which their lives are controlled by accidental happenings. b) There really is no such thing as “luck”. 19. a) One should always be willing to admit mistakes. b) It is usually best to cover up one’s mistakes. 20. a) It is hard to know whether or not a person really likes you. b) How many friends you have depends upon how nice a person you are. 21. a) In the long run the bad things that happen to us are balanced by the good ones. b) Most misfortunes are the result of lack of ability, ignorance, laziness, or all three. 22. a) With enough effort, we can wipe out political corruption. b) It is difficult for people to have much control over the things politicians do in office. 23. a) Sometimes I can’t understand how teachers arrive at the grades they give. b) There is a direct connection between how hard I study and the grades I get. 24. a) A good leader expects people to decide for themselves what they should do. b) A good leader makes it clear to everybody what their jobs are. 25. a) Many times I feel that I have little influence over the things that happen to me. b) It is impossible for me to believe that chance or luck plays an munotes.in

Page 42


Psychological Testing And Psychometrics Practicals
42 important role in my life. 26. a) People are lonely because they don’t try to be friendly. b) There’s not much use in trying too hard to please people, if they like you, they like you. 27. a) There is too much emphasis on athletics in high school. b) Team sports are an excellent way to build character. 28. a) What happens to me is my own doing. b) Sometimes I feel that I don’t have enough control over the direction my life is taking. 29. a) Most of the time I can’t understand why politicians behave the
way they do.
b) In the long run the people are responsible for a bad government
on a national as well as on a local level.
{Source: Rotter, J. B. (1966). Generalized expectancies for internal versus
external locus of control of reinforcement. Psychological Monographs:
General and applied, Whole No. 609, 80(1), 1 -28.}

*****
munotes.in

Page 43

43 4
TEST ADMINISTRATION AND
REPORTING – II
Unit Structure
4.0 Objectives
4.1 Introduction: 16PF Fifth Edition
4.1.1 Purpose
4.2 Standardization of Norms
4.3 Reliability, Internal Consistency, and Validity
4.4 Administration and Scoring
4.5 Interpretat ion and Reporting
4.6 Summary
4.7 Questions
4.8 References
4.0 OBJECTIVES  To learn about the 16 PF - Fifth Edition Scale by Cattell et al.
 To know how to administer, score, interpret and report the 16 PF -
Fifth Edition
 To know its psychometric propertie s (internal consistency, reliability
and validity)
4.1 INTRODUCTION: 16PF FIFTH EDITION The 16 PF Questionnaire is a widely known instrument measuring
personality factors. It was developed by Dr. Raymond B. Cattell over 45
years ago in order to identify th e sixteen primary components of
personality. Thus, 16PF stands for the sixteen personality factors. It is a
comprehensive measure of personality and found to be effective in a
variety of settings, where an in -depth assessment of the whole person is
require d. This test utilizes factor analysis and the 16PF traits are the result
of years of factor -analytic research focused on discovering the basic
structural elements of personality (Cattell, 1957, 1973). Thus, it is based
on the factor analysis of all English -language adjectives which describe
human behaviour.
It is widely used internationally and it has been adapted into over 35
languages worldwide since its beginning. These adaptations are beyond
simply translations, that is, they are careful cultural adapt ations with new
norms and reliability and validity research in each new country. The Web -
based administration of this test, which took place in 1999, allowed munotes.in

Page 44


Psychological Testing And Psychometrics Practicals
44 international test -users easy access to administration, scoring, and reports
in many different lan guages by using local norms.
Cattell’s Theory of Personality :
Cattell’s 16PF Questionnaire was based on his factor -analytic theory
(Cattell, 1933, 1946). He identified the five broad dimensions that are a
variant of the ‘Big Five’ Factors (Cattell, 1957, 1 970). He proposed three
levels of factors through his work as a multi -level, hierarchical structure of
personality. These factors are as follows:
1) Primary factors or first -order factors:
Cattell and his colleagues first discovered the primary traits. T hese factors
provide the most basic definition of individual personality differences.
They are more specific primary traits, which are more precise in nature
and reveal the fine details and shades that make each person unique. They
are also more powerful i n understanding and predicting the complexity of
the actual behaviour of the person (Ashton, 1998; Judge et al., 2002;
Mershon & Gorsuch, 1988; Paunonen & Ashton, 2001; Roberts et al.,
2005). Cattell and his colleagues then factor -analyzed these primary tr aits
themselves in order to investigate personality structure at a higher level.
2) Second -order factors:
They are global measures that describe personality at a broader and
conceptual level. These are the factors that emerged from the factor
analysis of the primary traits. They were the original Big Five and were
found to define personality at a higher and more theoretical level of
personality.
3) Third -order factors :
These factors were the result of the factor analysis of global factors, that
is, secon d-order factors. The third -order factors were at the highest, most
abstract level of personality organization (Cattell, 1946, 1957, 1973).
These factors are also called the super factors of personality (Cattell &
Mead, ). Many researchers who attempted to investigate the third -order
factor structure of the 16PF by studying different populations and by
applying factor analysis, and found similar results with two third -order
factors:
• Third -order Factor I, which involves Extraversion and Independence,
and
• Third -order Factor II, which involves Self -Control and Tough -
mindedness
• The fifth global factor is Anxiety/neuroticism, which loads on both of
these two third -order factors.
The results yielded by these researchers are consistent with Cattell’s
original belief that these third -order factors may not represent personality munotes.in

Page 45


45 Test Administration And Reporting – II traits in the usual sense, but they might reflect some broad, abstract level
of sociological or biological influences on human temperament (Cattell,
1957, 1973). However, Cattell and Mead () express the need for further
investigation in defining and understanding these third -order factors.
The 16PF Questionnaire has a scientific origin, due to which it has a long
history of empirical research. It is rooted in a well -established theory of
individual differences. This questionnaire has an extensive body of
research which dates back over half a century and it provides evidence of
its utility in various settings, such as clinical, counselling, industrial -
organizational, educational and research (Cattell et al., 1970; Cattell &
Schuerger, 2003; Conn & Rieke, 1994; Krug & Johns, 1990; Russell &
Karol, 2002). It has been found that the 16PF is among the top five most
commonly used normal -range instruments in both research and practice
(Butcher & Ro use, 1996; Piotrowski & Zalewski, 1993; Watkins et al.,
1995).
The 16PF instrument provides scores on the 16 primary scales, 5 global
scales, and 3 response bias scales. All personality scales are bipolar, that is
they have clear, meaningful definitions a t both ends (test taker and test
giver). They are given in the Stens (standardized -ten scores) that range
from 1 to 10 with a mean of 5.5 and a standard deviation of 2.0. The latest
standardization of the questionnaire, which was published in 2001,
include s over 10000 people.
History and Development of the 16PF Questionnaire :
The 16PF Questionnaire was developed from a unique perspective with a
scientific quest and it attempted to discover the basic structural elements
of personality. Thus, the history of t his instrument spans almost the entire
history of standardized personality measurement. Cattell’s personality
research was based on his strong background in physical sciences. He had
the goal of discovering the basic elements of personality and investigati ng
universal aspects of personality, for which he wanted to apply scientific
methods to the unexplored domain of human personality. It was Cattell’s
vision for psychology to advance as a science that psychology also needed
basic measurement techniques for personality. He believed that the basic
dimensions of personality could be discovered and then measured.
Over several decades, Cattell and his colleagues systematically measured
the widest possible range of personality dimensions with the belief that all
aspects of human personality which are or have been of importance,
interest, or utility, have already become recorded in the substance of
language (Cattell, 1943). They studied the personality traits in diverse
populations using three different methodologie s as follows:
1) L-data: observation of natural, in -situ life behaviour (E.g., academic
grades, number of traffic accidents, or social contacts)
2) Q-data: questionnaire from the self -report domain, and munotes.in

Page 46


Psychological Testing And Psychometrics Practicals
46 3) T-data: objective behaviour measure in standardiz ed, experimental
settings (E.g., number of original solutions to problem presented,
responses to frustrations).
The 16PF Global Scales and Other Five -Factor Models :
The 16PF has included the broad, second -order dimensions, discussed
previously, for over 50 years and they are currently called ‘the Big Five’.
The 16PF scales and items also played an important role in the
development of the other Big Five factor models (Costa and McCrae,
1976, 1985; Norman, 1963; McKenzie et al., 1997; Tupes and Christal,
1961 ). Since the release of the fourth edition of the 16PF around 1970, all
five traits have been clearly identified and scorable from the questionnaire.
A range of studies was conducted to compare the five 16PF global factors
and the set of NEO Big Five facto rs. The results of these studies show a
striking resemblance between 16PF factors and NEO Big Five factors
(Carnivez & Allen, 2005; H.E.P.Cattell, 1996; Conn & Rieke, 1994;
Gerbing & Tuley, 1991; Schneewind & Graf, 1998).
The average correlation between th e 16PF global factors and their
respective NEO five factors is just as high as those between the NEO five
factors and the Big Five markers, which the NEO was developed to
measure (H.E.P. Cattell, 1996; Goldberg, 1992). However, important
differences betwee n the two models also have been found. Also, the
particular set of traits of the five global factors has been found to be
problematic. The biggest difference between the two approaches is the
method of development of the primary -level traits. The first -order primary
trait definitions in the 16PF Questionnaire are based on the scientific
research carried out for decades, and have been confirmed in a wide range
of independent studies. In contrast, the primary -level personality facets of
the NEO -PI were decide d by consensus among a small group of
psychologists (who selected what they felt should appear in each NEO
domain).
The extensive research resulted in the 16 unitary traits of the 16PF
Questionnaire. They are presented below (Table 4.1):
Table 4.1 16PF Sc ale Names and Descriptors DESCRIPTORS OF LOW RANGE PRIMARY SCALES DESCRIPTORS OF HIGH RANGE Reserved, Impersonal, Distant Warmth (A) Warm-hearted, Caring, Attentive to Others Concrete, Lower Mental Capacity Reasoning (B) Abstract, Bright, Fast-Learner Reactive, Affected by Feelings Emotional Stability (C) Emotionally Stable, Adaptive, Mature Deferential, Cooperative, Avoids Conflict Dominance (E) Dominant, Forceful, Assertive Serious, Restrained, Liveliness (F) Enthusiastic, Animated, munotes.in

Page 47


47 Test Administration And Reporting – II Careful Spontaneous Expedient, Nonconforming Rule-Consciousness (G) Rule-Conscious, Dutiful Shy, Timid, Threat-Sensitive Social Boldness (H) Socially Bold, Venturesome, Thick-Skinned Tough, Objective, Unsentimental Sensitivity (I) Sensitive, Aesthetic, Tender-minded Trusting, Unsuspecting, Accepting Vigilance (L) Vigilant, Suspicious, Skeptical, Wary Practical, Grounded, Down-To-Earth Abstractedness (M) Abstracted, Imaginative, Idea-Oriented Forthright, Genuine, Artless Privateness (N) Private, Discrete, Non-Disclosing Self-Assured, Unworried, Artless Apprehension (O) Apprehensive, Self-Doubting, Worried Traditional, Attached To Familiar Openness to Change (Q1) Open to change, Experimenting Group-Oriented, Affiliative Self-Reliance (Q2) Self-Reliant, Solitary, Individualistic Tolerates Disorder, Unexacting, Flexible Perfectionism (Q3) Perfectionistic, Organized, Self-Disciplined Relaxed, Placid, Patient Tension (Q4) Tense, High Energy, Driven GLOBAL SCALES Introverted, Socially Inhibited Extraversion Extraverted, Socially Participating Low Anxiety, Unperturbable Anxiety Neuroticism High anxiety, Perturbable Receptive, Open-Minded, Intuitive Tough-Mindedness Tough-Minded, Resolute, Unempathic Accommodating, Agrreable, Selfless Independence Independent, Persuasive, Willful Unrestrained, Follows Urges Self-Control Self-Controlled, Inhibits Urges
{Source: Cattell, H.E.P. and Mead, A. D. (). Sixteen Personality Factor
Questionnaire (16 PF). In The Sage Handbook of Personality Theory and
Assessment (pp. 135 -159), The Sage Publication.}
munotes.in

Page 48


Psychological Testing And Psychometrics Practicals
48 The first publication of the 16PF Questionnaire took place in 1949. Since
then there have been four major revisions of this test. The most recent
release is the 16PF – Fifth Edition Scale (Cattell et al., 1993).
Uses and Applicatio ns:
• The 16PF is used in a wide range of settings, including
industrial/organizational, counselling and clinical, basic research,
educational, and medical settings, because of its strong scientific
background.
• This instrument efficiently provides compre hensive, objective
information. This ability of the instrument makes it a powerful tool,
particularly for industrial/organization applications, such as employee
selection, promotion, development, coaching, or outplacement
counselling.
• It is also widely u sed in career counselling settings.
• Despite being a measure of normal -range personality, this
questionnaire can be used in counselling/clinical settings to provide
an in -depth, integrated picture of the whole person.
• The 16PF dimensions have proven us eful in efficiently developing a
comprehensive picture of the whole person (including strengths and
weaknesses), facilitating rapport and empathy, helping clients develop
greater self -awareness, identifying relevant adjustment issues,
choosing appropriate therapeutic strategies, and planning
developmental goals (H.B. & H.E.P. Cattell, 1997; Karson et al.,
1997).
Description of 16PF – Fifth Edition:
The 16PF – Fifth Edition Scale, as the most recent version, aimed at
developing updated, refined item content and collecting a large, new norm
sample as its main goal. The item pool of this version included the best
items from all five previous forms of the 16PF. Also, new items were
written by the test authors and 16PF experts. The items were refined in a
four-stage, interactive process using large samples. Thus, this resulting
instrument has the following features:
1) Shorter, simpler items with updated language,
2) A more standardized answer format,
3) Reviewed for gender, cultural, and ethnic bias and ADA (Am ericans
with Disabilities Act) compliance,
4) Improved psychometric characteristics,
5) Easier hand scoring, and
6) Standardization with over 10,000 people munotes.in

Page 49


49 Test Administration And Reporting – II 7) Recent translations are culturally adapted, with local norms
8) Information on reliability and v alidity is available in individual
manuals.
The 16PF – Fifth Edition Scale contains 185 items with a three -point
answer format. These items comprise the 16 primary personality factor
scales, along with an Impression Management (IM) index. This index aims
at assessing social desirability. Each factor scale contains 10 to 15 items.
These factor scales remain denoted by the letters as assigned by Cattell
(e.g., “Factor A”). However, they also are designated by more descriptive
labels (e.g., “warmth”).
The con tent of its items is non -threatening and items ask about daily
behaviour, interests, and opinions. The questionnaire is meant for use with
people 16 years and older age and is written in a way providing ease at a
fifth-grade reading level. The short abilit y scale items (Factor B) are
grouped at the end of the questionnaire with separate instructions. Like
other versions of the 16PF, his particular version provides scores on the 16
primary scales, 5 global scales, and 3 response bias scales.
The following ar e the parallel versions of the 16PF Questionnaire for
younger age ranges, in which 16PF traits are also measured:
• 16PF Adolescent Personality Questionnaire measures the 16PF traits
in 12 -18 olds (Schuerger, 2001).
• 16PF Select is a shorter (20 -minute) v ersion that consists of a subset
of somewhat -shortened scales, which was developed for use in
employee selection settings (Cattell, R.B. et al., 1999).
• 16PF Express provides a very short, 15 -minute measure of all the
traits (with four or five items per f actor).
Apart from this, PsychEval Personality Questionnaire (PEPQ; Cattell, R.
B. et al., 2003), which is a comprehensive instrument that includes both
normal and abnormal personality dimensions, also consists of the 16PF
traits.
The improvements that hav e taken place in the 16PF Fifth Edition, are as
follows:
• Item content has been revised to reflect modern language usage and to
remove ambiguity. Also, it has been reviewed for gender, race, and
cultural bias.
• Response choices are consistently organized for all personality items,
with the middle response choice, which is always a question mark (?).
• Normative data have been updated, which reflects the 2000 U.S.
Census. Combined -gender norms are available as a scoring option in
accordance with federal ci vil rights legislation. munotes.in

Page 50


Psychological Testing And Psychometrics Practicals
50 • New administrative indices have been designed to assess response
bias. An Impression Management (IM) index is comprised of items
that are not found on the 16 primary personality factor scales, and it
replaces the “Faking Good” and “Faking Bad” scales of the fourth
edition. The current fifth edition also contains indices of
Acquiescence (ACQ) and Infrequency (INF). Personality scores are
no longer adjusted on the basis of validity indices.
• Psychometric properties also have been im proved, which we will
discuss in Section 4.6. Also, familiar criterion scores, such as
Adjustment and Creativity have been updated, and new ones, such as
Empathy and Self -Esteem have been added in this edition.
4.1.1 Purpose :
To find out the details of per sonality aspects in terms of sixteen
personality factors.
4.2 STANDARDIZATION OF NORMS The standardization of norms for the 16PF Fifth Edition was done on the
basis of the U.S. population. The final experimental form of this fifth
edition was administered to a large group of people (N = 4,449), when
standardization was conducted for the release of the 16PF Fifth Edition,
originally. Then a stratified random sampling procedure was used to create
the final normative sample of 2500. This sample stratification was based
on gender, race, age, and educational variables, with the target number for
each variable being derived from 1990 U.S. Census figures (Conn &
Rieke, 1994a).
An initial sample of 16PF Fifth Edition protocols (N = 31,244) was taken
from IPAT’s Test Services Division in order to create the updated norms
released in 2002. These protocols were received between 1999 and 2001.
During the process of standardization, all protocols with demographic
questions regarding race, Hispanic origin, age, education l evel,
occupation, and location within the U.S. was eliminated. Thus, after this
elimination procedure, the initial sample was reduced in size (N = 16,133).
Sample stratification was based on gender, race, age, and educational
variables, with the target num ber for each variable being derived from the
2000 U.S. Census figures. This stratification resulted in a total sample size
of 10,261 individuals, and this sample is the basis for the updated norms
released in 2002.
The size of the norm sample is 10,261, w hich consisted of 5,124 males
(49.9%) and 5,137 females (50.1%). The ages range from 16 to 82, with a
mean age of 32.7 years. Considering education, this sample also ranges
from “less than ninth grade” to “having a doctorate” and the majority had
at least some college (75.3%). Based on race, the sample included
Caucasian, African American, Asian American, American Indian,
Multiracial, and Other Races. Across these racial groups, a small
percentage (8.6%) identified themselves as being of Hispanic origin. Th is munotes.in

Page 51


51 Test Administration And Reporting – II sample included the residents of the Northeastern states, Southeastern
states, South Central States, and Western states.
Apart from this, for this fifth edition of the 16PF, the development of the
global factors involved submitting the final primary sc ales to principle
component factor analysis on the basis of the same national sample of
3,498 used in the primary scale development, followed by a Harris -Kaiser
oblique rotation and three hand rotations (Cattell, H.E.P., 1994).
4.3 RELIABILITY, INTERNAL CO NSISTENCY, AND VALIDITY Improved psychometric properties of the 16PF Fifth Edition include the
consistency of the 16PF results over time as evidenced by test -retest
correlations, and the internal consistency or homogeneity, of the test items
measured by Cr onbach’s coefficient alpha.
Reliability :
The stability of the different traits measured by the 16PF over time is
evident through test -retest coefficients. When the Pearson Product -
Moment Correlations were calculated for two -week test -retest intervals,
reliability coefficients for the primary factors ranged from .69 (Factor B –
Reasoning) to .86 (Factor Q2 – Self-Reliance), with a mean of .80. Test -
retest coefficients for the global factors were higher, ranging from .84 to
.91, with a mean of .87.
On the ot her hand, for the two -month interval, reliability coefficients for
the primary factors ranged from .56 (Factor L – Vigilance) to .79 (Factor
H – Social Boldness), with a mean of .70. Test -retest coefficients for the
global factors ranged from .70 to .82, w ith a mean of .78.
Internal Consistency :
Internal consistency of the 16PF Fifth Edition can be viewed as reliability
estimated from a single test administration. Measurement of the internal
reliability of a test shows that all items on a given scale assess the same
construct. Based on the norm sample of 10,261 adults, Cronbach alpha
coefficients calculated for the 16PF Fifth Edition ranged from .68 (Factor
E – Dominance; Factor Q1 – Openness to Change) to .87 (Factor H –
Social Boldness), with an average of .76.
Validity :
Construct validity of the 16PF Fifth Edition demonstrates that the test
measures 16 distinct personality traits. The results of the factor -analytic
methods provide evidence about the construct validity of the fifth edition
of the 16PF as a test. The primary factor pattern shows that with a few
exceptions, items of the 16PF Fifth Edition from a given primary factor
scale load on their particular factor scale, but not on other factor scales.
Also, the primary factor scales show a predictable p attern of
intercorrelations, because the factors are oblique. The 16PF Fifth Edition munotes.in

Page 52


Psychological Testing And Psychometrics Practicals
52 is found to be correlated with some other personality tests, such as
Personality Research Form (PRF; Jackson), the California Psychological
Inventory (CPI; Gough), the NEO PI-R (Costa & McCrae), and the
Myers -Briggs Type Indicator (MBTI; Briggs & Myers), based on some
personality factors
Criterion validity reflects the ability of the test to predict various criterion
scores, such as Self -Esteem and Creative Potential. There are different
behavioural criteria predicted from the 16PF Fifth Edition and present
correlations of the global and primary factors with the scales of
instruments that measure self -esteem, adjustment, social skill, empathy,
creative potential, and leaders hip potential.
4.4 ADMINISTRATION AND SCORING (Note: Sections 4.4 and 4.5 should be reported in the past tense while
writing in the journal as a past activity conducted in the psychology
laboratory.)
As discussed previously, the 16PF – Fifth Edition is de signed to be
administered to adults – aged 16 and older. It has an overall readability
estimated at the fifth -grade level. This test is untimed and has simple,
straightforward instructions. Hence, its administration requires minimal
supervision in either i ndividual or group settings. Administration of the
questionnaire can take place in the following two formats:
• Paper -and-pencil format: Administration time is about 35 -50 minutes.
• Computer/Internet format: Administration time is about 25 -35
minutes.
Here, we will focus on the paper -and-pencil format for administration,
which is a commonly used format.
4.4.1 Tools and Material:
• 16PF – Fifth Edition Scale with Answer/Response sheet
• Stationery
4.4.2 Procedure of Administration:
The test administrator ensures all arrangements for administering the test.
Then the test taker/participant is taken to the laboratory and is asked to sit
comfortably. Initial general instructions are given to the test taker as
follows for rapport building before presenting a 1 6PF – Fifth Edition,
along with a few general questions if required:
“Please be comfortable. I will be presenting the test that will help me
understand some aspects of your personality. There is no time limit for
completing this test. However, please try t o complete it as quickly and
spontaneously as possible. I’ll be giving you instructions for completing
the scale once presented”. munotes.in

Page 53


53 Test Administration And Reporting – II The test administrator then provides the test taker with the test booklet
with simple, clear, and instructions printed for the test takers and the
corresponding answer sheet. The administrator reads aloud the instructions
to test takers and responds to their necessary questions, if any before they
start responding to the test.
“Please open the booklet (the test administrator dir ects the test taker to the
page with instructions). I will read aloud the instructions. Please read the
instructions with me in your mind.” The test administrator reads the
instructions aloud starting with basic instructions.
“Do not make any marks in the test booklet, which is reusable. Do not skip
any questions and choose the first response that comes to mind rather than
spending too much time on any single question. Before starting the test,
please write your name and gender in the space provided on the left-hand
side of the answer sheet.”
After reading aloud instructions and making sure that the test taker has no
questions/doubts, the test taker is allowed to start responding to the test.
The test administrator checks that the test taker is marking resp onses
appropriately by darkening the response circles completely with a pencil,
if the test is going to be computer -scored.
After the test taker completes his responses and submits the answer sheet,
the test administrator reviews the answer sheet to ensure that the
demographic details have been filled in by the test taker and that all
responses are scorable. If required, the test taker is instructed to erase any
extraneous marks, complete missing answers, and ensure a single answer
to a single item in the r esponse. After ensuring that the administration part
has been completed well, the test taker is asked a few post -task questions.
For example, “How was the test?”, “Did you find any difficulty while
responding to the test?”, and similar other questions can be asked to know
the participant’s reactions about taking and completing the test. The
participant is also allowed to ask questions, if any. Then, he or she is
allowed to leave and escorted to the door.
4.4.3 Scoring the 16PF – Fifth Edition :
The answer sh eet of the 16PF Fifth Edition is compatible with both hand -
and computer -scoring options. Before scoring the answer sheet with
responses to the test, whether by hand or computer, the completeness of
the answers is verified and ensured again for the followi ng aspects:
• Demographic details (including sex -norms section) of the test taker as
required as indicated on the answer sheet
• Answers to all 185 items of the test
• Sex-specific norms (any one of the “combined sex” or “Sex -specific”
circle is marked).
munotes.in

Page 54


Psychological Testing And Psychometrics Practicals
54 A set of four scoring keys, a norm table, and an individual record form are
the required materials for hand -scoring the 16PF. Hand -scoring of the
completed answer sheet is done by following these four steps
Once all responses from the answer sheet are com pleted, the answer sheet
is considered to be ready for scoring in the following steps:
Step 1: Score the test:
By using the appropriate scoring keys, the 16 factors and five global
factors on the test were scored and a raw score for each factor is obtain ed.
The procedures that are followed are :
• The left edge of the first scoring key over the answer sheet is aligned
in such a way that the stars on the right side of the answer sheet
appear through the corresponding holes on the right side of the key.
• Marks visible through the holes in the area labelled “Factor A” is
counted as 1 or 2 points as indicated by the number adjacent to each
hole. The total of the points is obtained and entered in the space for
the Factor A raw score (as indicated by an arrow on the scoring key).
• Scoring the remaining four factors corresponding with the first key is
continued, following the same procedure as described above.
• The same procedure is followed to score other personality factors and
to obtain raw scores for the m by using the appropriate corresponding
keys. The IM and Factor B raw scores are obtained by using the
fourth answer key. Factor B responses are scored as 0 (incorrect) or 1
(correct).
• Appendix C was referred for hand scoring the response style indices
of Infrequency (INF) and Acquiescence (ACQ), for which there is no
scoring key.
Step 2: Convert raw scores to the Sten scores:
Here, in this step, raw scores are converted into standardized (sten) scores
by using the norm table included with the set of ha nd-scoring keys. Stens
are based on a 10 -point scale with a mean of 5.5 and a standard deviation
of 2. The raw scores are printed in the body of the table, while their
corresponding sten scores are located at the top of each column provided
in Appendix B o f the test manual. Here are the procedures involved in this
step, by using which the raw scores of the test are converted into sten
scores:
• Whether combined -sex or sex -specific norms are more appropriate for
Factor A was determined first.
• The test take r’s raw scores for Factor A corresponding to the norms
selected are located: A row (combined -sex norms), Male row, or
Female row. munotes.in

Page 55


55 Test Administration And Reporting – II • The raw score for Factor A is found in the column and the
corresponding sten score for Factor A is found at the top of the
column.
• The norm table is also used in converting the raw scores for the
Impression Management (IM) index. But this raw score of IM is
converted into a percentile, not a sten.
Step 3: Calculate Global Factor Sten Scores:
In this step, sten scores for th e five global factors of personality
(Extraversion, Anxiety, Tough -Mindedness, Independence, and Self -
Control) are calculated. Global factor sten scores are calculated by
following the instructions at the top of Side 1 of the Individual Record
Form. The fo llowing procedures are followed to calculate global factor
sten scores.
• The test taker’s primary factor sten scores are transferred from the
answer sheet to the left -hand column labelled “Sten” on the Individual
Record form.
• Scoring is begun with Facto r A, which is the first row. Test taker’s
Factor A sten score by the decimal in corresponding black boxes are
multiplied. The resultant product is entered into the empty box
adjacent to the black box.
• The same procedure is repeated to score each global f actor. Only one
product in some factor rows is calculated and recorded and two in
others. Here, some boxes are clear, while others are shaded.
• After calculating and recording the products for all 16 factors,
numbers in each pair of vertical columns (clea r and shaded) are added
separately. While obtaining the total of the decimals, a given constant
appearing in the first empty box at the base of the column pair is
included. Then, the sum of the decimals from the shaded column is
entered in the shaded box a t the base of the column pair.
• After the total of all the columns was obtained, each sum in a shaded
box is subtracted from the sum in a clear box. Then, the remaining
decimal is entered into the empty box. This decimal represents the
sten score to the nearest tenth of a sten for the global factor indicated.
Step 4: Profile Sten Scores:
After completing all the previous four steps (1 to 3), a pictorial
representation or profile of the test taker’s overall personality pattern is
achieved by graphing the sten scores for the five global factors. This
profile is referred to for the interpretation of test scores, which is quite
helpful. The procedures followed are as follows:
• The test taker’s primary and global factor sten scores in the sten
column are rec orded at the left of the profile sheet. The test taker’s
decimal sten score for each globa factor is rounded to the nearest munotes.in

Page 56


Psychological Testing And Psychometrics Practicals
56 whole number. Decimal sten scores are determined by completing the
global factor scoring worksheet on side 1 of the the Individual R ecord
Form.
• A dot is marked in the appropriate place corresponding to each
rounded global factor sten score and to each personality factor sten
score.
• The dots are connected using a series of short straight lines.
After completing the scoring by follow ing the procedure explained above,
the scores are interpreted and reported as explained in Section 4.5.
4.5 INTERPRETATION AND REPORTING Guidelines for interpreting the scores on 16PF Fifth Edition
Interpretation of Scores on Primary Factors:
From the inte rpretation point of view, the 16PF Questionnaire is bipolar in
nature (Table 4.1), that is, both high and low scores on the test have
meaning. Hence, generally, professionals should not assume that high
scores are “good” and low scores are “bad”. The right -side pole or high -
score range of the factor is described as the plus (+) pole, while the left -
side pole or low -score range is the minus ( -) pole.
Let us consider the example of Factor A:
High scorers on Factor A tend to be warm interpersonally. These high
scorers on Factor A are described as Warm (A+). On the other hand, low
scorers tend to be more reserved interpersonally, and they are described as
Reserved (A -). However, in some situations, being reserved might be quite
fitting or useful, while being war m might be more suitable in some
situations.
Interpretation of Scores on Global Factors:
Like the primary 16 factors, the global factors are also interpreted on both
poles and described accordingly. For example, high scorers on the
Extraversion factor tend to be extraverted and socially participating. On
the other hand, low scorers on this factor tend to be introverted and
socially inhibited.
Interpretation of Sten Scores:
The 16PF uses “standardized ten” (i.e., Sten) score scales ranging from 1 -
10, with a mean score of 5.5 and a standard deviation of 2. Scores that are
far away from the mean, are considered more extremes either in the high
or the low direction. The more extreme a score is toward a given factor
pole, the more likely that the descriptors for the scale’s pole will apply to
that particular score and that the trait will be apparent in the test taker’s
behaviour. munotes.in

Page 57


57 Test Administration And Reporting – II Historically, 16PF stens fall into the following three types of range:
• Stens 4 -7 fall within the average range
• Stens 1 -3 fall in t he low range
• Stens 8 -10 fall in the high range.
The 16PF Fifth Edition continues with the same ranges, in which a sten
score of 4 is described as “low -average” and a sten score of 7 is
considered as “high -average”. Similar categorizations are used in the
profile sheet and interpretive reports in this edition.
The recommended interpretive strategy for the 16PF profile involves
evaluating three types of indices in the following sequence indicated:
1) Response style indices: They are evaluated first as a che ck for
atypical test -response styles.
2) Global factor scales: They are examined next, because they provide a
broad picture of the person.
3) Primary factor scales: They are evaluated to obtain details of the
personality picture.
Thus, both the global dime nsions and the primary scales are scored.
Once the scores of the test taker on all 16 primary and 5 global factors are
interpreted by following the above guidelines, the results of the test are
reported as below (Since the reporting is on the past activit ies of
conducting, scoring and interpreting test, the results should be reported in
the past tense as mentioned before right in the beginning of the section and
as the sample provided below). Keep in mind that you are supposed to
enter the scores and inter pretation of your participant in the blank space
provided while reporting. While reporting the scores and their
interpretation for each factor, Table 4.1 in this unit or Figures 3 and 4 and
other important information from the test manual can be referred t o.
The 16PF Fifth Edition was conducted on the participant. The following
results were obtained after entering all sten scores of the 16 personality
factors and 5 global factors in the 16PF test profile. The test manual gives
an in -depth interpretation pro cedure of the obtained scores. However, here
we will focus on interpreting and reporting the sten scores at the primary
level, not going into much detail.
• Reporting the results on 16 Primary factors:
Factor A: The sten score was ___, being low/average/hi gh, which
indicates the participant is
___________________________________________________________
(Describe what the score implies in the blank space).
Similarly, report the scores of the participant on other remaining 15
primary factors (i.e. Factor B, F actor C, Factor E, Factor F, Factor G, munotes.in

Page 58


Psychological Testing And Psychometrics Practicals
58 Factor H, Factor I, Factor L, Factor M, Factor N, Factor O, Factor
Q1, Factor Q2, Factor Q3, and Factor Q4 ).
Let us understand this reporting part with an elaborated example
considering Factor A again:
The sten score for Factor A was 8, which was high. This indicates that the
participant is towards the plus pole (A+), in the high score range. This
means that the participant is warm, outgoing, and attentive to others. Thus,
in general, the person has more interest in p eople. He (or she) tends to
prefer occupations dealing with people.
• Reporting the results on 5 Global factors:
Factor EX: The sten score was ___, being low/average/high, which
indicates the participant is
_________________________________________________ ________
(Describe what the score implies in the blank space).
Similarly, report the scores of the participant on the other remaining 4
global factors (i.e. Factor AX, Factor TM, Factor IN, and Factor SC ).
Let us understand this reporting part with an elab orated example
considering Factor EX again:
The sten score for Factor EX (extraversion) was 7, which is average, but
still on the higher side. This also indicates that the participant is towards
the plus pole (E+), towards the high score range. This score is consistent
with the participant’s score on Factor A, which shows that the person is
extraverted and fond of people.
Note: While interpreting and reporting the scores on this particular test,
always keep in mind that whether the score is high or low, it does not
mean that it necessarily reflects the good or bad quality of the person. In
simple words, high scores are not necessarily associated with good quality.
Similarly, a low or average score is not necessarily associated with bad
quality.
All scores h ave a range of quality which is associated with that particular
factor and is normal, whether primary or general factors or global factors.
So the interpretation of the scores should be very comprehensive while
reporting and even communicating the results of the test with the
participant/client. Also, they should be reported and communicated to the
test taker/participant in a very sensitive manner.
• Reporting the results regarding Impression Management (IM)
factor:
The corresponding percentile for the IM r aw score of 5 is 10. This shows
the lower social desirability reflected in the participant’s responses. It
means the low score on IM reflects low social desirability on the
participant’s side. munotes.in

Page 59


59 Test Administration And Reporting – II 4.6 SUMMARY In this unit, we learned several details of the 16P F Fifth Edition
Questionnaire. Right in the beginning, we discussed some important
background of this test which included Dr. Raymond Cattell’s theory of
personality based on which he developed this test, the history and
development of the 16PF Questionnai re, comparison between the 16PF
global factors and other five -factor models, uses and applications of the
16PF Questionnaire.
We also studied the description of the 16PF Fifth Edition scale in terms of
its number of items, translations in multiple languag es, its important
features along with the improvements that took place in the most recent
fifth versions of the scale. We discussed the stanadardization of the test
norms, and the psychometric properties of the test (i.e., reliability, validity,
internal c onsistency). Then finally, we focused on its administration and
scoring, interpretation and reporting along with the precautions that should
be taken while conducting and after conducting the test on the test taker.
4.7 QUESTIONS 1. Explain Cattell’s theor y of personality.
2. Describe the recent version of the 16PF Questionnaire.
3. Explain the administration and scoring procedure of the 16PF Fifth
Edition in brief.
4. Write short notes on:
a) Uses and applications of the 16PF Questionnaire
b) History and D evelopment of the 16PF Questionnaire
c) 16PF global scales and other five -factor models
d) Guidelines on interpreting the scores on the 16PF Fifth Edition
Questionnaire
4.8 REFERENCES  Russell, M. & Karol, D. (2002). 16PF – Fifth Edition with Updated
Norms: Administration Manual. Illinois: Institute for Personality and
Ability Testing, Inc.
 Cattell, H.E.P. and Mead, A. D. (). Sixteen Personality Factor
Questionnaire (16 PF). In The Sage Handbook of Personality Theory
and Assessment (pp. 135 -159), The Sage Pu blication. Retrieved from
https://people.wku.edu/richard.miller/520%2016PF%20Cattell%20an
d%20Mead.pdf
****** munotes.in