Page 1
1 Module 1
1
INTRODUCTION TO INTERNATIONAL
TRADE
Unit Structure:
1.0 Objectives
1.1 Introduction
1.2 Definition of international trade
1.3 Classical view of international trade
1.4 Modern view of international trade
1.5 The Importance of International economics
1.6 Benefits of Foreign Trade
1.7 Foreign Direct Investments
1.8 Foreign Investment Implementation Authority (FIIA)
1.9 Benefits of Foreign Investment
1.10 Comparative cost Advantage
1.11 Ricardo: The theory of comparative advantages
1.12 Prof. Taussig’s restatement
1.13 Misconception about comparative advantage
1.14 The Pauper -Labor Argument
1.15 Summary
1.16 Questions
1.0 OBJECTIVES
To understand the concept of international economics
To study definition of international trade
To unders tand importance of international trade
To study the benefits of foreign trade
To understand the benefits of foreign investment munotes.in
Page 2
International Economics
2 To understand the comparative cost advantages theory
To study the Ricardian approach of cost advantages
To study the views of Taussig’s restatement
To understand the misconception about comparative advantages.
To understand Pauper Labour argument
1.1 INTRODUCTION
International Trade Theory deals with the different models of international
trade that have been developed to explain th e diverse ideas of exchange of
goods and services across the global boundaries. The theories of
international trade have undergone a number of changes from time to time.
The basic principle behind international trade is not very much different
from that in volved in the domestic trade. The primary objective of trade
is to maximize the gains from trade for the parties engaged in the
exchange of goods and services. Be it domestic or international trade, the
underlying motivation remains the same. The cost involved and factors of
production separate international trade from domestic trade.
International trade involves across border exchange and this increases the
cost of trading. Factors like tariffs, restrictions, time costs and costs
related with legal systems of the countries involved in trade make the
international trade a costly affair; whereas the extent of restrictions and
legal hassles are considerably low in case of domestic trade.
When it comes to the comparison between international trade and
domestic trade, the factors of production assume a crucial role. There is
no denying that mobility of factors of production is less across nations
than within the domestic territory. The incidence of trade in factors of
production like labor and capital is very common in case of domestic
trade; while in case of international trade exchange of goods and services
contributes the major share of the total revenue.
International trade theory has always been a preferred field of research
amongst the traditional and contemporary economists. The international
trade models attempt to analyze the pattern of international trade and
suggest ways to maximize the gains from trade. Among the different
international trade theories, the Ricardian model, the Heckscher - Ohlin
model and the Gravity model of trade are worth mentioning.The
Ricardian model of international trade is developed on the theory of
comparative advantage. According to this model countries involved in
trade, specialize in producing the products in which they have
comparative advantage.
The Heckscher -Ohlin model put stress on endowments of factors of
production as basis for international trade. As per this theory countries will
specialize in and export those products, which make use of the
domestically abundant f actors of production more intensively than those
factors, which are scarcely available in the home country. munotes.in
Page 3
Introduction t o International Trade
3 The Gravity model of trade provides an empirical explanation of
international trade. According to this model, the economic sizes and
distance betwee n nations are the primary factors that determine the
pattern of international trade.
The international trade theories also deal with challenges before
international trade, international trade laws, rules of international trade
and many other related issues .
1.2 DEFINITION OF INTERNATIONAL TRADE
The economic interaction among different nations involving the exchange
of goods and services, that is, exports and imports. The guiding principle
of international trade is comparative advantage, which indicates that
every country, no matter their level of development, can find something
that it can produce cheaper than another country. International finance,
the study of payments between nations, is a related area of international
economics. A summary of internationa l trade undertaken by a particular
nation is given with the balance of trade.
A branch of economics that studies economic interactions among different
countries, including foreign trade (exports and imports), foreign exchange
(trading currency), balance of payments, and balance of trade. While
much of the interaction among countries is largely an extension of basic
economic principles, complications do arise because nations are distinct
political entities, with different laws and cultures, and with little o r no
overall governmental oversight. The guiding principle in the study of
international economics is comparative advantage, which indicates that
every country, no matter their level of development, can find something
that it can produce cheaper than anoth er country. The study of
international economics focuses on two related areas -- international trade
and international finance.
1.3 CLASSICAL VIEW OF INTERNATIONAL TRADE
The law of comparative advantage provides a logical explanation of
international trade as the rational consequence of the comparative
advantages that arise from inter-regional differences - regardless of how
those differences arise. Since its exposition by John Stuart Mill the
techniques of neo-classical economics have been applied to it to model
the patterns of trade that would result from various postulated sources of
comparative advantage. However, extremely restrictive (and often
unrealistic) assumptions have had to be adopted in order to make the
problem amenable to theoretical analysis . The best -known of the resulting
models, the Heckscher -Ohlin theorem (H-O) depends upon the
assumptions of no international differences of technology, productivity, or
consumer preferences; no obstacles to pure competition or free trade and
no scale econo mies. On those assumptions, it derives a model of the trade
patterns that would arise solely from international differences in the
relative abundance of labour and capital (referred to as factor
endowments). The resulting theorem states that, on those assu mptions, a munotes.in
Page 4
International Economics
4 country with a relative abundance of capital would export capital -
intensive products and import labour -intensive products. The theorem
proved to be of very limited predictive value, as was demonstrated by
what came to be known as the "Leontief P aradox" (the discovery that,
despite its capital -rich factor endowment, America was exporting labour -
intensive products and importing capital -intensive products) Nevertheless
the theoretical techniques (and many of the assumptions) used in deriving
the H -O model were subsequently used to derive further theorems. The
Stolper -Samuelson theorem, which is often described as a corollary of the
H-O theorem, was an early example. In its most general form it states that
if the price of a good rises (falls) then the price of the factor used
intensively in that industry will also rise (fall) while the price of the other
factor will fall (rise). In the international trade context for which it was
devised it means that trade lowers the real wage of the scarce factor of
production, and protection from trade raises it. Another corollary of the H -
O theorem is Samuelson's factor price equalisation theorem which states
that as trade between countries tends to equalise their product prices, it
tends also to equalise the prices paid to their factors of production. Those
theories have sometimes been taken to mean that trade between an
industrialised country and a developing country would lower the wages of
the unskilled in the industrialised country. (But, as noted below, that
conclusion depends upon the unlikely assumption that productivity is the
same in the two countries). Large numbers of learned papers have been
produced in attempts to elaborate on the H-O and Stolper - Samuelson
theorems, and while many of them are considered to provide valuable
insights, they have seldom proved to be directly applicable to the task of
explaining trade patterns.
1.4 MODERN VIEW OF INTERNATIONAL TRADE
Modern trade theory moves away from the restrictive assumptions of the
H-O theorem and explore s the effects upon trade of a range of factors,
including technology and scale economies. It makes extensive use of
econometrics to identify from the available statistics, the contribution of
particular factors among the many different factors that affect trade. The
contribution of differences of technology has been evaluated in several
such studies. The temporary advantage arising from a country’s
development of a new technology is seen as contributory factor in one
study. Other researchers have found research and development
expenditure, patents issued, and the availability of skilled labor, to be
indicators of the technological leadership that enables some countries to
produce a flow of such technological innovations and have found that
technology leaders tend to export hi-tech products to others and receive
imports of more standard products from them. Another econometric study
also established a correlation between country size and the share of
exports made up of goods in the production of which there are scale
economies. It is further suggested in that study that internationally -traded
goods fall into three categories, each with a different type of comparative
advantage: munotes.in
Page 5
Introduction t o International Trade
5 goods that are produced by the extraction and routine processing of
available natural resources – such as coal, oil and wheat, for which
developing countries often have an advantage compared with other
types of production – which might be referred to as "Ricardo goods";
low-technology goods, such as textiles and steel, that tend to migrate
to countries with appropriate factor endowments - which might be
referred to as "Heckscher -Ohlin goods"; and,
High -technology goods and high scale -economy goods, such as
computers and aeroplanes, for which the comparative advantage
arises from the availab ility of R&D resources and specific skills and
the proximity to large sophisticated markets.
Check Your Progress:
1. What do you mean by international trade?
2. Define international trade.
3. Discuss modern view of international trade.
1.5 THE IMPORTANCE OF INTERNA TIONAL
ECONOMICS
The international trade (or Economics) is merely an application of general
economics in the particular context. Economics deals with the proper
allocation and efficient use of scarce resources. International economics
is also concerned with allocation of economic resources among
countries. Such allocation is done in the world markets by means of
international trade. Under the concept of free trade, the best products are
produced and sold in a free competitive market. Such benefits of
produc tion efficiency like better quality and lower price are available to all
peoples of the world.
One fundamental principle in international trade is that one should buy
goods and services from a country which has the lowest price, and sell his
goods and serv ices to a country which has the highest price. This is good
for the buyers and for the sellers. Another, with free trade, the less
developed countries has the opportunities to accelerate the pace of their
economic development. They can import machines and adapt foreign
technology. They can send their scholars and technocrats to more
progressive countries to gain more knowledge and skills which are
relevant to the particular needs of their developing economies.
In the final analysis, no country in the world can be economically
independent without a decline in its economic growth. Even the richest
countries buy raw materials for their industries from the poorest
countries. If every country produces only for its own needs, then
production and consumption of goo ds would be limited. Clearly, such
situation hampers economic progress. Furthermore, the standard of living
of the people all over the world would have no chance to improve. munotes.in
Page 6
International Economics
6 Because of international trade, people with money can acquire goods and
services w hich are not available in their own countries. Hence, satisfaction
of consumers can be maximized.
1.6 BENIFITS OF FORIGN TRADE
International trade allows countries to exchange goods and services with
the use of money as a medium of exchange. Several advant ages can be
identified with reference to international trade. However international
trade does have its limitations as well. Discussed below are both
advantages and disadvantages of international trade.
Greater variety of goods available for consumption – international
trade brings in different varieties of a particular product from different
destinations. This gives consumers a wider array of choices which will
not only improve their quality of life but as a whole it will help the
country grow.
Efficient allocation and better utilization of resources since countries
tend to produce goods in which they have a comparative advantage. When
countries produce through comparative advantage, wasteful duplication
of resources is prevented. It helps save the environm ent from harmful
gases being leaked into the atmosphere and also provides countries with a
better marketing power.
Promotes efficiency in production as countries - will try to adopt better
methods of production to keep costs down in order to remain competit ive.
Countries that can produce a product at the lowest possible cost will be
able to gain a larger share in the market. Therefore an incentive to produce
efficiently arises. This will help standards of the product to increase and
consumers will have a good quality product to consume.
• More employment could be generated as the market for the
countries’ goods widens through trade. International trade helps generate
more employment through the establishment of newer industries to cater
to the demands of variou s countries. This will help countries bring down
their unemployment rates.
1.7 FOREIGN DIRECT INVESTMENT
Foreign investment comprises foreign direct investment (FDI) and
foreign portfolio investment (FPI). The two categories are
conceptually distinct in se veral respects. FDI represents a long-term
vision and strategic commitment of the investors to the recipient
economy. In contrast, FPI is intrinsically short -term aiming to
maximize risk -return payoffs from capital markets. While both FDI
and FPI are refle cted in capital structures of resident enterprises as
equity held by non-resident entities, FDI is distinguished by the
investor’s desire to hold a controlling stake in the enterprise.3 In this
respect, foreign investment policies of host economies usually refer
to FDI policies with operational procedures for portfolio investment
being functionally inclusive aspects of such policies.
munotes.in
Page 7
Introduction t o International Trade
7 India’s present policy framework for inward FDI was introduced by
the Industrial Policy Statement of July 24, 1991. The fram ework has
subsequently evolved and enlarged in line with reforms and
structural developments in the economy. The present policy allows
foreign investors to invest in resident entities through either the
automatic route or the government -administered route.
Most sectors and activities qualify for the automatic route. This route
allows investors to bring in funds without obtaining prior permission
from the Government, RBI, or any other regulatory agency. However,
invested enterprises are required to inform RBI within 30 days of
receipt of funds and also comply with documentation requirements
within 30 days of issue of shares to foreign investors. Certain
investment intentions do not qualify under automatic route and
require prior permission from the government . There are also
sectors/activities where despite being eligible for automatic route,
foreign investment is subject to other caveats.
Foreign Direct Investment (FDI) is now recognized as an important
driver of growth in the country. Government is, therefor e, making all
efforts to attract and facilitate FDI and investment from Non Resident
(NRIs) including Overseas Corporate Bodies (OCBs) that are
predominantly owned by them, to complement and supplement
domestic investment. To make the investment in India a ttractive,
investment and returns on them are freely repatriable, except where
the approval is subject to specific conditions such as lock -in period
on original investment, dividend cap, foreign exchange neutrality,
etc. as per the notified sectoral polic y. The condition of dividend
balancing that was applicable to FDI in 22 specified consumer goods
industries stands withdrawn for dividends declared after 14th July
2000, the date on which Press Note No. 7 of 2000 series was issued.
Foreign direct investmen t is freely allowed in all sectors including the
services sector, except a few sectors where the existing and notified
sectoral policy does not permit FDI beyond a ceiling.
FDI for virtually all items/activities can be brought in through the
Automatic Rout e under powers delegated to the Reserve Bank of
India (RBI), and for the remaining items/activities through
Government approval. Government approvals are accorded on the
recommendation of the Foreign Investment Promotion Board (FIPB).
Foreign Direct Invest ment (FDI) in India in growing rapidly. Foreign
direct investment is an integral part of an open and effective
international economic system and a major catalyst to development.
FDI is highly beneficial for a country like India. Empirical studies
suggest t hat FDI triggers technology spillovers, assists human capital
formation, contributes to international trade integration, helps create a
more competitive business environment and enhances enterprise
development. All these factors contribute to higher econom ic growth
and consequently aid in alleviating poverty. Apart from bestowing munotes.in
Page 8
International Economics
8 economic benefits FDI may also help improve environmental and
social conditions by transferring "cleaner" technologies and leading to
more socially responsible corporate policies.
Foreign Direct Investment in India is permitted as under the
following forms of investments:
Through financial collaborations.
Through joint ventures and technical collaborations.
Through capital markets via Euro issues.
Through private placements or prefe rential allotments.
FDI is not permitted in the following industrial sectors:
Arms and ammunition.
Atomic Energy.
Railway Transport.
Coal and lignite.
Mining of iron, manganese, chrome, gypsum, sulphur, gold,
diamonds, copper, zinc.
Foreign direct investme nts in India are approved through two
routes:
1. Automatic approval by RBI: The Reserve Bank of India accords
automatic approval within a period of two weeks (provided certain
parameters are met) to all proposals involving:
Foreign equity up to 50% in 3 categ ories relating to mining activities.
Foreign equity up to 51% in 48 specified industries.
Foreign equity up to 74% in 9 categories.
Investments in high-priority industries or for trading companies primarily
engaged in exporting are given almost automatic approval by the RBI.
FDI in India on automatic route is not allowed in the following
sectors:
Proposals that require an industrial licence and cases where foreign
investment is more than 24% in the equity capital of units
manufacturing items reserved for the small scale industries.
Proposals in which the foreign collaborator has a previous venture/tie -
up in India.
Proposals relating to acquisition of shares in an existing Indian
company in favour of a Foreign/Non -Resident Indian (NRI)/Overseas
Corporate Body (OCB) investor; and munotes.in
Page 9
Introduction t o International Trade
9 Proposals falling outside notified sectoral policy/caps or under sectors
in which FDI is not permitted and/or whenever any investor chooses to
make an application to the Foreign Investment Promotion Board and not
to avail of the automa tic route.
2. FIPB Route: Foreign Investment Promotion Board (FIPB) is a
competent body to consider and recommend foreign direct investment,
which do not come under the automatic route. Normal processing time of
an FDI proposal in FIPB is 4 to 6 weeks. FIPB i s located in the
Department of Economic Affairs, Ministry of Finance. Its constitution is
as follows:
Secretary, Department of Economic Affairs (Chairman)
Secretary, Department of Industrial Policy & Promotion (Member)
Secretary, Department of Commerce (Member)
Secretary, (Economic Relation), Ministry of External Affairs (Member)
FIPB can co -opt Secretaries to the Govt. of India and other top officials of
financial institutions, banks and professional experts of industry and
commerce, as and when necessary .
1.8 FOREIGN INVESTMENT IMPLEMENTION
AUTHORITY (FIIA)
Government has set up Foreign Investment Implementation Authority
(FIIA) to facilitate quick translation of Foreign Direct Investment (FDI)
approvals into implementation by providing a pro - active on e stop after
care service to foreign investors, help them obtain necessary approvals and
by sorting their operational problems. FIIA is assisted by Fast Track
Committee (FTC), which have been established in 30 Ministries/
Departments of Government of India for monitoring and resolution of
difficulties for sector specific projects.
1.9 BENEFITS OF FOREIGN INVESTMENT
1. One of the advantages of foreign direct investment is that it helps in
the economic development of the particular country where the
investment is being made.
2. This is especially applicable for the economically developing
countries. During the decade of the 90s foreign direct investment
was one of the major external sources of financing
3. for most of the countries that were growing from an economic
perspective. It has also been observed that foreign direct investment
has helped several countries when they have faced economic
hardships.
4. An example of this could be seen in some countries of the East Asian
region. It was observed during the financial prob lems of 1997 -98 that
the amount of foreign direct investment made in these countries was
pretty steady. The other forms of cash inflows in a country like debt
flows and portfolio equity had suffered major setbacks. Similar munotes.in
Page 10
International Economics
10 observations have been made in Latin America in the 1980s and in
Mexico in 1994 -95.
5. Foreign direct investment also permits the transfer of technologies.
This is done basically in the way of provision of capital inputs. The
importance of this factor lies in the fact that this transfe r of
technologies cannot be accomplished by way of trading of goods
and services as well as investment of financial resources. It also
assists in the promotion of the competition within the local input
market of a country.
6. The countries that get foreign direct investment from another country
can also develop the human capital resources by getting their
employees to receive training on the operations of a particular
business. The profits that are generated by the foreign direct
investments that are made in that country can be used for the purpose
of making contributions to the revenues of corporate taxes of the
recipient country.
7. Foreign direct investment helps in the creation of new jobs in a
particular country. It also helps in increasing the salaries of t he
workers. This enables them to get access to a better lifestyle and
more facilities in life. It has normally been observed that foreign
direct investment allows for the development of the manufacturing
sector of the recipient country.
8. Foreign direct investment can also bring in advanced technology
and skill set in a country. There is also some scope for new research
activities being undertaken.
9. Foreign direct investment assists in increasing the income that is
generated through revenues realized through t axation. It also plays a
crucial role in the context of rise in the productivity of the host
countries. In case of countries that make foreign direct investment in
other countries this process has positive impact as well. In case of
these countries, their companies get an opportunity to explore newer
markets and thereby generate more income and profits.
10. It also opens up the export window that allows these countries the
opportunity to cash in on their superior technological resources. It has
also been observ ed that as a result of receiving foreign direct
investment from other countries, it has been possible for the recipient
countries to keep their rates of interest at a lower level.
11. It becomes easier for the business entities to borrow finance at lesser
rates of interest. The biggest beneficiaries of these facilities are the
small and medium -sized business enterprises.
Check Your Progress:
1. Discuss the advantages and disadvantages of international trade.
2. What do you understand by Foreign Direct Investment?
3. Write a note on Foreign Investment Implementation Authority. munotes.in
Page 11
Introduction t o International Trade
11 1.10 COMPARATIVE COST ADVANTAGE
The idea of comparative advantage is simple and most important in the
field of international trade. If our country can produce some set of
goods at lower cost than a foreign country, and if the foreign country
can produce some other set of goods at a lower cost than we can produce
them, then clearly it would be best for us to trade our relatively cheaper
goods for their relatively cheaper goods. In this way both countries may
gain from trade.
The original idea of comparative advantage dates to the early part of the
19th century. Although the model describing the theory is commonly
referred to as the "Ricardian model", the original description of the idea
can be fo und in an ‘Essay on the External Corn Trade’ by Robert Torrens
in 1815. David Ricardo formalized the idea using a compelling, yet
simple, numerical example in his 1817 book titled, “On the Principles of
Political Economy and Taxation”. The idea appeared ag ain in James Mill's
“Elements of Political Economy” in 1821. Finally, the concept became a
key feature of international political economy upon the publication of
“Principles of Political Economy” by John Stuart Mill in 1848.
A country has a comparative adv antage in the production of a good if it
can produce that good at a lower opportunity cost relative to another
country. Thus the US has a comparative advantage in cheese production
relative to France if: 3261LW LW
LCLCaa
aa
This means that the US m ust give up less wine to produce another pound
of cheese than France must give up to produce another pound. It also
means that the slope of the US PPF is flatter than the slope of France's
PPF.
Starting with the inequality above, cross multiplication impli es the
following, aLC aLC aLW aLWaLW aLCaLW aLC
This means that France can produce wine at a lower opportunity cost than
the US. In other words France has a comparative advantage in wine
production. This also means that if the US has a comparative advantage in
one of the two goods, France must have the comparative advantage in the
other good. It is not possible for one country to have the comparative
advantage in both of the goods produced.
Suppose one country has an absolute advantage in the production of both
goods. Even in this case each country will have a comparative advantage
in the production of one of the goods. For example, suppose aLC = 10, munotes.in
Page 12
International Economics
12 aLW = 2, aLC * = 20, aLW* = 5. In this *case aLC (10) < aLC * (20) and
aLW (2) < a LW*(5) so the US has the absolute advantage in the production
of both wine and cheese. 20 1052aLC aLC
aLWaLW
However, it is also true that so that France has the comparative advantage
in cheese production relative to the US.
Another way to describe comparative a dvantage is to look at the relative
productivity advantages of a country. In the US the labour productivity in
cheese is 1/10 while in France it is 1/20. This means that the US
productivity advantage in cheese is (1/10)/(1/20)= 2/1. This means the US
is twice as productive as France in cheese production. In wine
production the US advantage is (1/2)/(1/5) = (2.5)/1. This means the
US is two and one-half times as productive as France in wine production.
The comparative advantage good in the US then is that go od in which the
US enjoys the greatest productivity advantage, wine. France's comparative
advantage good however, is that good in which it has the least
productivity disadvantage in production, namely cheese.
The only case in which neither country has a co mparative advantage is
when the opportunity costs are equal in both countries. In other words,
when aLC aLCaLWaLW
then neither country has a comparative advantage. It would seem however,
that this is an unlikely occurrence.
1.11 RICARDO: THE THEORY OF COMPARATIVE
ADVANTAGES
Highlights:
Trade occurs due to differences in production t echnology.
The Ricardian model is constructed such that the only difference between
countries is in their production technologies. All other features are
assumed identical across countries. Since trade would occur and be
advantageous, the model highlights one of the main reasons why countries
trade; namely, differences in technology.
Trade is advantageous for everyone in both countries.
Although most models of trade suggest that some people would benefit
and some lose from free trade, the Ricardian model shows that everyone
could benefit from trade. This can be shown using an aggregate
representation of welfare (national indifference curves) or by calculating
the change in real wages to workers. However, one of the reasons for this munotes.in
Page 13
Introduction t o International Trade
13 outcome is the simplifying assumption that there is only one factor of
production.
Even a technologically inferior country can benefit from free trade.
This interesting result was fir st shown by Ricardo using a simple
numerical example. The analysis highlights the importance of producing
a country's comparative advantage good rather than its absolute
advantage good.
A developed country can compete against some low foreign wage
industri es.
The Ricardian model shows the possibility that an industry in a developed
country could compete against an industry in a less developed country
even though the LDC industry pays its workers much lower wages.
Assumptions:
Following are the assumption of the Ricardian Model:
There are two countries, producing two goods, using one factor of
production, usually labour. The model is a general equilibrium model
in which all markets (i.e., goods and factors) are perfectly competitive.
The goods produced are as sumed to be homogeneous across countries
and firms within an industry. Goods can be costlessly shipped between
countries (i.e., there are no transportation costs).
Labor is homogeneous within a country but may have different
productivities across countries . This implies that the production
technology is assumed to differ across countries.
Labor is costlessly mobile across industries within a country but is
immobile across countries. Full employment of labour is also assumed.
Consumers (the laborers) are assumed to maximize utility subject to an
income constraint.
Numerical example:
The simplest way to demonstrate that countries can gain from trade in the
Ricardian model is by use of a numerical example. This is how Ricardo
presented his argument originally. The example demonstrates that both
countries will gain from trade if they specialize in their comparative
advantage good and trade some of it for the other good. We set up the
example so that one country (the US) has an absolute advantage in the
production of both goods. Ricardo's surprising result was that a country
can gain from trade even if it is technologically inferior in producing every
good. Adam Smith had explained in the Wealth of Nations that trade is
advantageous to both countries, but in his ex ample each country had an
absolute advantage in one of the goods. That trade could be advantageous
if each country specializes in the good in which it has the technological
edge is not surprising at all.
munotes.in
Page 14
International Economics
14 Suppose the exogenous variables in the two countrie s take the values in
the following table.
Table 1.1
By assumption the U.S. has the absolute advantage in cheese
production and wine production since aLC(1) < aLC*(6) and aLW(2) <
aLW*(3).
The US also has the comparative advantage in cheese production
since.1623LC LC
LWLWaa
aa
The cost of producing cheese in the U.S. is ½ gallon per pound of
cheese. In France, it is 2 gallon per pound.
France, however, has the comparative advanta ge in wine production
since .3261LW LW
LCLCaa
aa
The cost of producing wine in France is ½ pound of cheese per gallon of
wine while in the U.S., it is 2 pounds per gallon.
The production possibility frontiers for both countries are plotted on the
adjoining figure. Notice that the US PPF lies outside France's PPF. Since
both countries are assumed to be the same size in the example, this
indicates the US absolute advantage in the production of both goods.
Figure 1.1
The absolute value of the slope o f each PPF represents the opportunity
cost of cheese production. Since the US PPF is flatter than France's this
means that the opportunity cost of cheese production is lower in the US
and thus indicates that the US has the comparative advantage in cheese
production. US aLC = 1 aLW = 2 L = 24
France aLC * =6 aLW* = 3 L* = 24
munotes.in
Page 15
Introduction t o International Trade
15 With full employment of labor, production will occur at some point on the
PPF.
To see the effects of specialization and free trade we must compare it to a
situation of no trade, or autarky. Thus we must construct an autarky
equilibrium first. To determine the autarky production point requires some
information about the consumer demand for the goods. Producers will
produce whatever consumers demand at the prevailing prices such that
supply of each good equals demand. In autarky this means that the
production and consumption point for a country are the same.
For the purpose of this example we will simply make -up a plausible
production/consumption point under autarky. Essentially we assume that
consumer demands are such as to generate the chosen production point.
The Table below shows the autarky production/consumption levels for the
two countries. It also shows total world production for each of the goods.
Table 1.2
Autarky Production/Consumption Points
In this diagram we depict the autarky production and consumption points
Figure 1.2
for the US and France. Each point lies on the interior section of the
country's production possibility frontier.
Ricardo argued that trade gains could arise if countries first specialize in
their comparative advantage good and then trade with the other country. Autarky Production/Consumption Cheese (lbs) Wine (gals) US 16 4
France 3 2
World
Total 19 6
munotes.in
Page 16
International Economics
16 Specialization in the example means that the US produces only cheese
and no wine, while France pro duces only wine and no cheese. These
quantities are shown in the following Table. Also shown are the world
totals for each of the goods.
Production with Specialization in the
Comparative Advantage Good
Cheese
(lbs) Wine (gals)
US 24 0
France 0 8
World Total 24 8
Table 1.3
At this point we can already see a remarkable result. When countries
specialize in their comparative advantage good, world output of both
wine and cheese rises. Cheese output rises from 19 to 24 pounds. Wine
output rises from 6 to 8 gallons. What is more, the output increases occur
without an increase in the quantity of labor used to produce them. In
autarky it took 48 worker -hours to produce 19 pounds of cheese and 6
gallons of wine. With specialization, the same 48 worker -hours prod uce
24 cheese and 8 wine. This means that there is an increase in world
productivity - more output per unit of labor. Often this productivity
improvement is referred to as an increase or improvement in world
production efficiency .
The increase in world pro duction efficiency does not benefit the countries
unless they can trade with each other after specialization. Both production
points were feasible under autarky but the countries demanded some of
each good. Thus, the countries will want some of each good a fter
specialization and the only way to accomplish this is through trade. Now
if the world can produce more of both goods through specialization,
clearly there must be a way to divide the surplus between the two
countries so that each country ends up with more of both goods after
trade than they had in autarky.
The surplus in world production amounts to 5 extra pounds of cheese
and 2 extra gallons of wine. To assure that trade is advantageous for the
two countries, each must have at least as much to consume of one good
and more to consume of the other. Suppose we split the wine surplus
equally and give 3 extra pounds of cheese to France and 2 extra pounds to
the US. Since the US consumed 16 cheese and 4 wine in autarky, they
would now have18 cheese and 5 win e after specialization and trade.
France, which began with 3 cheese and 2 wine in autarky, would now
have 6 cheese and 3 wine. Consumption and production after trade for the
two countries is shown in the Table.
munotes.in
Page 17
Introduction t o International Trade
17 Consumption and Production after Trade
Chee se (lbs) Wine (gals)
Consumption Production Consumption Production
US 18 24 5 0
France 6 0 3 8
World
Total 24 24 8 8
Table 1.4
For consumption of both goods to be higher in both countries trade must
occur. In the example, the US is consuming 5 gallons of wine and
producing none so it must import the 5 gallons from France. France is
consuming 6 pounds of cheese with no cheese production so it must import
the 6 pounds from the US. The terms of trade is ToT = 5 gal/6 lbs or 5/6
gal/lb.
Conclusions:
The Ricardian model numerical example assumes that countries differ in
their production technologies such that one of the countries is more
productive than the other in the production of each of the two goods. If
these two countries specialize in their comparative advantage good then
world production rises for both goods. Increased output occurs even
though there is no increase in the amount of labour input in the world,
thus the example demonstrates that specialization can raise world
production efficienc y. Because of the increase in output, it is possible to
construct a terms of trade between the countries such that each country
consumes more of each good with specialization and trade than was
possible under autarky. Thus, both countries can gain from trade. The
surprising result from this example is that a country which is
technologically inferior to another in the production of all goods can
nevertheless benefit from trade with that country.
Limitations:
A numerical example can display only one possible outcome for the
model. As such, all conclusions should be viewed as possibilities rather
than a general result of the model. With further thought there are some
problems with the example. First, it is conceivable that with a different
choice for the countr y's autarky production/consumption points, world
output might not rise for both goods upon specialization. In this case we
could not be sure that both countries would gain from trade. Second,
since we merely made up a terms of trade that generated the inte resting
conclusion, we could ask whether a favorable terms of trade is likely to
arise or not. Is it possible to make up a different terms of trade such that
one country enjoys all the benefits of increased production while the
other is made worse off? How can we be sure that this outcome would not
arise? Finally, even if the country has more of both goods after trade, can munotes.in
Page 18
International Economics
18 we be sure that all consumers would have more of both goods? Perhaps
some consumers would have more while other less.
The answer to some of these questions can be found by describing more
carefully some of the features of the model. We must describe the
relationship between prices and wages. Using these relationships, we can
explain the impact of free trade on the price ratio and the effec t of trade on
the distribution of income.
1.12 PROF. TAUSSIG’S RESTATEMENT
Prof. Taussig said, we can easily translate 'comparative differences in
labour cost of commodities into absolute differences in prices without
affecting the real exchange relations between commodities. For this, let us
take the following illustration:
Suppose, in country A: 1 day's labour produces 20 units of wine, and 1
day's labour produces 20 units of cloth, while in country B: 1 day's labour
produces 10 units of wine, and 1 day's labour produces 15 units of cloth.
Thus, country A has an absolute superiority in producing both the
commodities but it has a comparative advantage in wine. Hence, country
A will specialise in wine. Country B has comparative advantage in cloth,
so it will specialise in cloth.
In order to convert labour costs into money costs let us take daily wages
into account, which we may assume to be Rs. 100 in country A and Rs. 80
in country B. Thus:
MONEY COST OF COMMODITIES
Country Product of 1
day's labour Daily Wage =
Money cost per
day's labour Rs. Money Cost
=Supply Price
per unit of
output (Rs.)
A 20 Units of
Wine 20
Units of Cloth 100 5.00
100 5.00
B 10 Units of
Wine 15 Units
of Cloth 80 8.00
80 5.33
Table 1.5
It is easy to see that the money cost (or price) of producing wine is lower
in country A as compared to that in B (in A it is Rs. 5 per unit, while in B it
is Rs. 8 per unit). In view of the Ricardian comparative cost theory,
whether we compare money costs or labour costs, it may be implied, thus, munotes.in
Page 19
Introduction t o International Trade
19 that, country A will specialize in the production of wine and export it to
B. On the other hand, B has a relatively less disadvantage in money cost
of producing cloth. Hence, B will specialize in the production of cloth and
export it to A.
It may be criticised that the above result is obtained because we have
arbitrarily chosen the wage rates. But the objection holds no water as
under our assumption, there will always be an upper and lower limit
within which the ratio of money wages betwee n the two countries must
lie. It is only the choice of one or other of the ratios within these limits
which is arbitrary. But these limits to the wage rate differences are not
arbitrarily chosen. They are fixed by the comparative efficiency of labour
in each country.
Taussig, however, tried to defend it by saying that if we divide labour into
certain groups, then within each group, we will have units of the same
efficiency. This is called stratification of labour. If stratification of labour
in both the cou ntries is the same, then they must be at the same stage of
economic development. But Taussig's defence is weak, because
stratification of labour in different countries will not be the same since
different countries are at different stages of economic and technological
advancement.
1.13 MISCONCEPTION ABOUT COMPARATIVE
ADVANTAGE:
The sources of the misunderstandings are easy to identify.
First, the principle of comparative advantage is clearly counter -intuitive.
Many results from the formal model are contr ary to simple logic.
Secondly, the theory is easy to confuse with another notion about
advantageous trade, known in trade theory as the theory of absolute
advantage. The logic behind absolute advantage is quite intuitive. This
confusion between these two c oncepts leads many people to think that
they understand comparative advantage when in fact, what they
understand is absolute advantage. Finally, the theory of comparative
advantage is all too often presented only in its mathematical form. Using
numerical e xamples or diagrammatic representations are extremely useful
in demonstrating the basic results and the deeper implications of the
theory. However, it is also easy to see the results mathematically, without
ever understanding the basic intuition of the theory.
1.14 THE PAUPER -LABOR ARGUMENT
The most interesting myth is the ‘Pauper -Labor Argument’: ‘Foreign
competition is unfair and hurts other countries if it is based on low wages.’
Wolf also discusses this argument. Responding that labor is cheap if
unprod uctive, he implies that no unfairness is inflicted on workers in
industrialized countries. While Wolf disputes the argument’s factual
assumption, Krugman and Obstfeld try to rebut the fairness complaint munotes.in
Page 20
International Economics
20 directly. They say it does not matter what causes low er production costs
abroad. What matters for the importing country is that it is cheaper in
terms of its labor to produce some goods and exchange them for others,
rather than to produce everything, regardless of why those are cheaper
abroad. What they seem to be saying is that countries trade because
production costs differ. Drawing on this notion as a rebuttal of fairness
complaints, they seem to endorse the Strong Westphalian View. How
others determine social costs is none of ‘our’ business. We need not b e
concerned with how others treat their workers, nor can our workers
complain on such grounds.
This is a conditional argument: if legislation of social standards rests on
moral reasons, then consistency considerations (considerations exploring
what is enta iled by the fact that standards hold for moral reasons) deliver
the conclusion that domestic industries may deserve compensation. Yet as
a factual claim about legislation, this view is often false. Consider an
excerpt from the 1930 US Tariff Act: All goods , wares, articles, and
merchandise mined, produced, or manufactured wholly or in part in any
foreign country by convict labor or/and forced labor or/and indentured
labor under penal sanctions shall not be entitled to entry at any of the
ports of the United States, and the importation thereof is hereby prohibited
but in no case shall such provisions be applicable to goods, wares, articles,
or merchandise so mined, produced, or manufactured which are not
mined, produced, or manufactured in such quantities in the United States
as to meet the consumptive demands of the United States.
In the view that a country loses by importing from another country that
has low wages presumably by lowering wages at home. This view
ignores the fact that low wages are due to low productivity, and that the
high-wage home country, with high productivity, will have comparative
advantage in some products and will gain from trade.
1.15 SUMMARY
1. International trade involves across border exchange and this increases
the cost of trading. Factors like tariffs, restrictions, time costs and
costs related with legal systems of the countries involved in trade
make the international trade a costly affair.
2. The international trade models attempt to analyze the pattern of
international trade and suggest ways to maximize the gains from
trade.
3. The best -known of the resulting models, the Heckscher -Ohlin
theorem (H-O) depends upon the assumptions of no international
differences of technology, productivity, or consumer preferences; no
obstacles to pure competition or free trade and no scale economies.
The resulting theorem states that, on those assumptions, a country
with a relative abundance of capital would export capital -intensive
products and import labour -intensive products.
munotes.in
Page 21
Introduction t o International Trade
21 4. Modern trade theory exp lores the effects upon trade of a range of
factors, including technology and scale economies. It makes extensive
use of econometrics to identify from the available statistics, the
contribution of particular factors among the many different factors
that affect trade.
5. A country has a comparative advantage in the production of a good if
it can produce that good at a lower opportunity cost relative to another
country – Ricardo.
6. Prof. Taussig said, we can easily translate 'comparative differences in
labour cost of commodities into absolute differences in prices without
affecting the real exchange relations between commodities.
1.16 QUESTIONS
1. Define and explain International trade.
2. Differentiate between Classical view and Modern view of
International trade.
3. Explai n the importance of foreign trade.
4. Discuss the benefits of foreign trade.
5. Discuss in detail Ricardian Theory of Comparative Cost Advantage.
6. Write note on: Pauper Labour Argument
munotes.in
Page 22
22 2
FACTOR ENDOWMENT THEORY OF
INTERNATIONAL TRADE
Unit Structure :
2.0 Objectives
2.1 Introduction
2.2 Factor Endowment Theory of International Trade
2.3 Heckscher -Ohlin Thesis
2.4 Empirical Evidence on Heckscher -Ohlin Model
2.5 The Leontieff’s Paradox
2.6 Summary
2.7 Questions
2.0 OBJECTIVES
To study the H-O model of international trade.
To study the Factor endowment theory of international trade.
To study the assumptions, explaination, merits and drawbacks of H-O
thesis.
To study the empirical evidence on H-O model.
To study what is Leontief’s paradox.
2.1 INTRODUCTION
The Heckscher -Ohlin (H-O hereafter) model was first conceived by two
Swedish economists, Eli Heckscher (1919) and Bertil Ohlin. Rudimentary
concepts were further developed and added later by Paul Samuelson and
Ronald Jones among others.
There are four major components of the H-O model:
1. Factor Price Equalization Theorem,
2. Stolper -Samuelson Theorem,
3. Rybenzynski Theorem, and
4. Heckscher -Ohlin Trade Theorem.
munotes.in
Page 23
Factor Endowment Theory of International Trade
23 Due to t he difficulty of predicting the goods trade pattern in a world of
many goods, instead of the Heckscher -Ohlin Theorem, the Heckscher -
Ohlin -Vanek Theorem that predicts the factor content of trade received
attention in recent years. Eli Heckscher (1879 - 1952) Heckscher
was a Swedish economist. He is probably best known for his book
"Mercantilist." Although his major interest was in studying economic
history, he also developed the essentials of the factor endowment theory of
international trade in a short article in Swedish in 1919. It was translated
into English thirty years later. Bertil Ohlin (1899 -1979) Heckscher's
student, Bertil Ohlin developed and elaborated the factor endowment
theory. He was not only a professor of economics at Stockholm, b ut also
a major political figure in Sweden. He served in Riksdag (Swedish
Parliament), was the head of liberal party for almost a 1/4 of a century. He
was Minister of Trade during World War II. In 1979 Ohlin was awarded
a Nobel prize jointly with James Mea de for his work in international
trade theory.
HO Model = 2 × 2 × 2 model (2 countries, 2 commodities, 2 factors)
For example, there are two countries (America and Britain); each country
is endowed with 2 homogeneous factors (labor and capital) and produce s
2 commodities.
This is the smallest case of " even" model, i.e., the number of commodities
is equal to that of factors. Extending the model to a more general case is
not easy. In fact, the results obtained from a more general model do not
have the clear, common sense interpretations which the simple HO model
enjoys.
2.2 FACTOR ENDOWMENT THEORY OF
INTERNATIONAL TRADE
According to the factor endowment theory, a country with a relatively
cheaper cost of labour would export labour -intensive products, while a
country where the labour is scarce and capital is relatively abundant would
export capital -intensive goods. Wassily Leontief carried out an empirical
test of the Heckscher -Ohlin Model in 1951 to find out whether or not the
US, which has abundant capital resources, exports capital -intensive goods
and imports labour -intensive goods. He found that the US exported more
labour -intensive commodities and imported more capital -intensive.
Heckscher (1919) and Bertil Ohlin (1933) developed a theory to explain
the rea sons for differences in relative commodity prices and competitive
advantage between two nations. According to this theory, a nation will
export the commodity whose production requires intensive use of the
nation's relatively abundant and cheap factors and import the commodity
whose production requires intensive use of the nation's scarce and
expensive factors. Thus, a country with an abundance of cheap labour
would export labour - intensive products and import capital -intensive
goods and vice versa. It sugge sts that the patterns of trade are
determined by factor endowment rather than productivity. The theory
suggests three types of relationships, which are discussed here. munotes.in
Page 24
International Economics
24 Land -labour relationship
A country would specialize in production of labour intensive goods if the
labour is in abundance (i.e., relatively cheaper) as compared to the cost of
land (i.e., relatively costly). This is mainly due to the ability of a labour -
abundant country to produce something more cost -efficiently as
compared to a country where labour is scarcely available and therefore
expensive.
Labour -capital relationship
In countries where the capital is abundantly available and labour is
relatively scarce (therefore most costly), there would be a tendency to
achieve competitiveness in the production of goods requiring large capital
investments.
Technological complexities
As the same product can be produced by acopting various methods or
technologies of production, its cost competitiveness would have great
variations. In order to minimize the cost of production and achieve cost
competitiveness, one has to examine the optimum way of production in
view of technological capabilities and constraints of a country.
2.3 HECKSCHER -OHLIN THESIS
Bertil Ohlin and Eli Heckscher have explained the basis of international
trade in terms of factor endowments. The classical theory demonstrated
that the basis of international trade was the comparative cost difference.
However, it did not explain the causes of such comparative cost
difference. The alternative for mulation -of the comparative cost doctrine
developed by Heckscher and Ohlin explains why comparative cost
differences exist internationally.
They attribute international (and inter -regional) differences in comparative
costs to:
(a) Different prevailing endowmen ts of the factors of production; and
(b) The fact that the production of various commodities requires that the
factors of production be used with different degrees of intensity.
In short, it is the difference in factor intensities in the production functions
of goods along with the actual differences in relative factor endowments
of the countries which explains the international differences in the
comparative cost of production.
Thus, in a nutshell, the Heckscher -Qhlin theory states that a country
will speciali se in the production and export of the goods whose
production requires a relatively large amount of the factor with which
the country is relatively well endowed with capital only if the ratio of
capital to other factors is higher than in other countries. For example,
assume that: munotes.in
Page 25
Factor Endowment Theory of International Trade
25 (i) In Country A:
Supply of labour =25 onits
Supply of capital =20 units
Capital/labour ratio = 0.8
(ii) In Country B:
Supply of labour =12 units
Supply of capital =15 onits
Capital/labour ratio = 1.25
In the above example, even though Country A has more capital in
absolute terms, Country B is more richly endowed with capital because the
ratio of capital to labour in Country A (0.8) is lower than in Country B
(1.25).
The two-country, two-commodity model of Heckscher and Ohlin is based
on a number of explicit and implicit assumptions. The important
assumptions of the model are:
(i) Both the product and factor markets in both the countries are
characterised by perfect competition.
(ii) The factors of productio n are perfectly mobile within each
country but immobile between countries.
(iii) The factors of production are of identical quality in both the
countries.
(iv) Factor supplies in each country are fixed.
(v) The factors of production are fully employed in both the countri es.
(vi) The factor endowments of one country vary from those of the
other.
(vii) There is free trade between the countries, i.e., there are no artificial
barriers to trade.
(viii) International trade is costless, i.e., there is no transport cost.
(ix) The techniques of producin g indentical goods are the same in both
the countries. Because of this act, the same input mix will give the
same quantity and quality of output in both the countries.
(x) Factor intensity varies between goods. For instance, some goods are
capital intensive (i .e., they require relatively more capital for their
production) and some others are labour intensive (i.e., they require
relatively more labour for their production.
(xi) Production is subject to the law of constant returns, i. e., the input/
output ratio will remain constant irrespective of the scale of
operations. munotes.in
Page 26
International Economics
26 Most of the above assumptions are, obviously, unrealistic. The Heckscher -
Ohlin model has been criticised mainly for its oversimplifying and
unrealistic assumptions.
Wassily W. Leontief s study has re vealed that the USA, which is a capital
rich country, imported capital intensive goods arid exported labour
intensive goods. This has come to be popularly known as the Leontief
Paradox, which is a negation of the Heckscher -Ohlin thesis. It should,
however, be pointed out that Leontief’s study has been criticised as
unscientific.
Despite its drawbacks, the Heckscher -Ohlin theory has certain definite
merits. These are:
(i) The Heckscher -Ohlin theory rightly points out that the immediate
basis of international tra de is the differences in the final price of a
commodity as between countries, although the actual basis or ultimate
cause of trade is the comparative cost differences in production. Thus,
it provides a more comprehensive and satisfactory explanation for
the existence of international trade.
(ii) The Heckscher -Ohlin theory is superior to the Comparative Cost
theory in some other respects also. The Ricardian theory points out
that comparative cost difference is the basis of international trade; but
it does not exp lain the reasons for the existence of comparative cost
differences between nations. The Heckcsher -Ohlin theory explains the
reasons for the differences in the cost of production in terms of the
differences in factor endowments. This is another aspect of th e
Heckscher -Ohlin analysis that makes it superior to the Ricardian
analysis.
(iii) Further, Heckscher and Ohlin made it very clear that "international
trade is but a special case of inter-local or inter- regional trade", and
hence there is no need for a special theory of international trade.
Ohlin states that regions and nations trade with each other for the
same reasons that individuals specialise and trade. The comparative
cost difference is the basis of all trade -inter- regional as well as
international. Natio ns, according to Ohlin, are only regions
distinguished from one another by such obvious marks as national
frontiers, tariff barriers and differences in languages, customs and
monetary systems.
The modern theory of trade is also called the General Equilibr ium
Theory of international trade because it points out that the general
demand and supply analysis applicable to inter -regional trade may
generally be used without substantial changes in dealing with
problems of international trade.
(iv) Another merit of the Heckscher: Ohlin theory indicates the impact of
trade on product and factor prices.
The Heckscher -Ohlin theory indicates that international trade will
ultimately have the following results: munotes.in
Page 27
Factor Endowment Theory of International Trade
27 (a) Equalisation of Commodity Prices: International trade tends to
equalise the prices of internationally traded goods in all the regions of the
world because trade causes the movement of commodities from areas
where they are abundant to areas where they are scarce. This would tend
to increase commodity prices where there is abundance and decrease
prices where there is scarcity by reason of redistribution of commodity
supply between these two regions as a result of trade. International trade
tends to expand up to the point where prices in all the regions become
equal. But perfect equality of prices can hardly be achieved because of
the existence of transport costs and the absence of free trade and perfect
competition.
(b) Equalisation of Factor Prices: International trade also tends to
equalise factor prices all over the world . It increases the demand for
abundant factors (leading to an increase in their prices) and decreases the
demand for scarce factors (leading to a fall in their prices) because, when
nations are on trade, specialisation takes place on the basis of factor
endowments. But, in reality, the presence of a number of imperfections
make the achievement of perfect equality in factor prices impossible.
Check Your Progress:
1. State the four major components of H-O model.
2. Discuss the assumptions of H-O model.
3. Explain the merits of H-O model.
2.4 EMPIRICAL EVIDENCE ON HECKSCHER -OHLIN
MODEL
Leontieff (1954) used 1947 U.S. input -output tables to estimate the factor -
intensity of U.S. exports and ‘import replacements . He found that,
contrary to theoretical expectations, U.S. exports were more labor -
intensive and less capital -intensive than U.S. exports.
Conclusion: the evidence appeared to contradict the predictions of the
theorem.
Vanek (1959) found the natural resource content of U.S. exports was
approximately one -half that of U.S. imports. He suggested that capital and
natural resources were, to some degree, complementary in U.S. trade, so
that U.S. importation of natural resources were, to some degree, that U.S.
imports were relatively capital -intensive.
Conclusion: natural resources should be excluded from any test of the
theory
Minhas (1963) found evidence that factor intensity reversals was fairly
prevalent. He studied 24 industries in 19 countries and found factor -
intensity reversals in five cases. A bilateral comparison of 20 industries in
the US and Japan found a low correlation in capital - labour ratios between
the two countries.
munotes.in
Page 28
International Economics
28 Conclusion: factor -intensity reversal is not uncommon, in which case
relative factor endowments may fail to predict patterns of trade.
Kenen (1964) made the first attempt to include human capital. It was
estimated for U.S. exports and imports and added to physical capital
requirements. Using 1947 data, he found that, even including natural
resource -based products, the paradox was eliminated.
Conclusion: if capital is broadened to include human capital, the evidence
appears to support the theory for U.S. trade.
Keesing (1966) found that U.S. exports were more skill -intensive than the
exports of nine other industrial countries for the year 1957. Conclusion:
the inclusion of human capital shows U.S. exports to be relatively
capital -intensive
Badwin (1971) examined the factor content of U.S. trade for 1962, using a
wider range of factors and distinguishing between physical and human
capital. He found that the inclusion of human capital significantly
weakened the Leontieff Paradox, but was not sufficient to reverse it. He
also found that the exclusion of natural resource - based products almost
eliminated the paradox.
Conclusion: the inclusion of a wid er range of factors achievers a better
results, but still fails to confirm the theory.
Leamer (1980) adopted a different approach by comparing the capital -to-
labour ratio is U.S. production with U.S. consumption rather than U.S.
exports compared with impor ts. He found that the capital -labour ratio
was indeed higher in U.S. production than U.S. consumption and
concluded that there was, therefore, no paradox. Conclusion: the use of a
different methodology gives a different result .
Stern and Maskus (1981) also incorporated human capital using a single
measure based on rates of pay as reflecting the skill of the labour involved.
They found that the paradox remained for U.S. trade in 1958, but
disappeared in 1972. They also estimated the factor content of production
and consumption to be equal for all three factors used.
Conclusion: the inclusion of human capital eliminates the paradox, but
leaves the theory saying very little.
Havrylyshyn (1984) tested the Heckscher -Ohlin theory for a sample of
trade between d eveloped and developing countries (i.e. North -South
trade). He found that the exports of developing countries to developed
countries were less captial -intensive than their imports including both
physical and human capital.
Conclusion: The Heckscher -Ohlin works better in predicting trade
patterns between developed and developing countries.
Bowen, Leamer and Sviekauskas (1987) used data for 27 countries to
see how well relative factor abundance predicted actual patterns of trade.
Data for 12 factors were used . Relative factor abundance was measured
by the share of different factors in a country’s national income (factor
income) and factor intensities by the factor content of exports and imports. munotes.in
Page 29
Factor Endowment Theory of International Trade
29 They found that, for two - thirds of the factors, trade flows ran in the
direction predicted less than 70% of the time.
Conclusion: the empirical evidence fails to provide support for the
Heckscher -Ohlin theory.
2.5 THE LEONTIEFF’S PARADOX
One of the attractions of the HO theory is that it provides us with set of
simple and readily testable predictions. One of the first attempts made to
test the theory was made by a Russian -born economist, Wassily Leontieff
(b.1906) in 1954. Using the 1947 input -output tables for the United States,
he sought to test the proposition that t he US had a comparative advantage
in capital - intensive goods and therefore traded these goods for imported
labour -intensive products. Leontieff measured the factor intensity of U.S.
exports and import replacements using the input -output tables. The reason
for taking import replacements (U.S. produced goods that are substitutes
for goods imported) rather than imports was that information about
factor intensities could not be obtained for all the products which the US
imported or for all the countries from whom she imported. If the factor
intensities for these products are the same in other countries, the use of
import replacements need pose no major problems. Interestingly,
Leontieff's results showed that U.S. imports were more capital -intensive
than U.S. ex ports, the exact opposite of what the theory predicted
(Leontieff, 1954)!
The Leontieff Paradox, as it came to be known, seemed to prove that the
HO theory was wrong. Subsequently, a variety of explanations were put
forward for Leontieff's results.
1. One possible explanation was that the year chosen. 1947, was not
very representative given that trading patterns may still have been -
distorted by the ending of the Second World War. However, attempts
to carry out the same test for later years reproduced the same result
and thus appear to refute the explanation (Leontieff, 1956).
2. A second explanation focused on the use of import replacements
rather than imports. If products imported by the US were produced by
different methods in other countries to those adopted i n the US, factor
intensities will differ and the use of import replacements as a proxy
for imports will render the, theory invalid. Specifically, it is possible,
given the scarcity of labour in the US, that goods that are produced by
labour -intensive metho ds abroad, are produced by capital intensive
methods in the US. This is known as factor - intensity reversal
(Ellsworth, 1954) The important question is: to what extent does
factor -intensity reversal occur in reality) and is it of sufficient
importance to r ender the HO theory invalid? If factor - intensity
reversal is a common occurrence then the HO assumption that all
countries face identical production functions for the same good is not
valid and the theory breaks down. Empirical research his
established that factor -intensity reversal does, indeed, take place
(Minhas 1963). However, it appears that, in most cases, it is not munotes.in
Page 30
International Economics
30 sufficient to account for the result obtained by Leontieff. (See
Leontieff 1964, Moroaey, 1967, Bhagwati, 1969.)
3. A third explanation is that the assumption of identical consumer
preferences is invalid. Specifically, it was argued that , in 1947, on
account of their higher per capita income; U.S. consumers had a
greater preference for capital -intensive goods. Higher quality
consumer goods ar e generally more capital -intensive than lower
quality ones (see Houthakker, 1957).
4. The explanation preferred by Leontieff was that U.S. labour Was
superior to that of other countries. Quite arbitrarily, he gave a figure
of three to one as the difference between the efficiency of U.S. labour
and that of - other countries. In that case, labour could not be described
as relatively scarce and the fact that U.S. exports were more labour -
intensive than U.S. imports was hardly surprising. The main problem
with this argument is that it is by no means apparent why this hold be
true of labor alone. There is every reason to suppose that U.S. capital
was also more productive than that of other countries, in which case
the capital -labour ratio would be unaffected and the presumption that
labour was relatively scarce would still hold. No empirical evidence
has been forthcoming to contradict this.
5. A further explanation has emphasised the failure of Leontieff to
distinguish human from physical capital. Human capital finds its
embodiment in the skills and education of a country's labour force.
If allowance is made for this, it would be the case that U.S. exports
are more capital -intensive than Leontieff found. In a later work,
Leontieff himself found that the average level of s kill of the labour
force in the U.S. was higher in the export than the import
replacements sector (Leontieff, 1956). Subsequently, Kenen (1965)
has shown that, once human capital is included, the Leontieff Paradox
is reversed but only just. On the other hand, using a different method
of estimating human capital, Baldwin (1971) found that, while the
inclusion of human capital was sufficient to weaken the Paradox, it
was' not enough to reverse it. In fact, since physical and human
capital are hardly perfectly substitutes, it is more appropriate to treat
human capital as a separate factor of produc - tion. Since human
capital and not capital in aggregate is most probably the United States'
most abundant factor of production, the right test to perform is to
measu re the relative human capital intensity of U.S. exports.
6. The next explanation concerns natural resources that are moitted as a
factor from the model used by Leontieff. The HO model becomes
more complex if a third factor of production is introduced. Attenti on
was drawn to the fact that, on account of her rapid industrialisation,
the US had become relatively deficient in natural
7. resources such that much of what she imported consisted of resource -
intensive goods. The possibility, therefore, existed that natura l
resources and not labour were her relatively most scarce factor.
Therefore, the US had become an exporter of both capital - and labour -
intensive goods in exchange for resource -intensive goods. In a later munotes.in
Page 31
Factor Endowment Theory of International Trade
31 study, Leontieff excluded certain resource imports which were non
competitive with U.S. production (i.e. they could not be produced
anywhere in the US) and found that the original Paradox disappeared.
Work by Vanek (1963) confirmed that U.S. imports were more
resource -intensive than her exports. He also found some evidence that
capital and natural resources were complementary in U.S. imports but
not in U.S. exports. If so, this would impart a capital -intensive bias to
U.S. imports.
2.6 SUMMARY
1. Heckscher and Ohlin developed a theory to explain the reasons for
differences in relative commodity prices and competitive advantage
between two nations. According to this theory, a nation will export
the commodity whose production requires intensive use of the
nation’s relatively abundant and cheap factors and import the
commodity whose production requires intensive use of the nation’s
scares and expensive factors.
2. The H -O model has been criticized mainly for its oversimplifying and
unrealistic assumptions.
3. The H -O theory indicates that international trade will ultimat ely have
the following results:
i) International trade tends to equalize the prices of internationally
traded goods in all the regions of the world,
ii) It tends to equalize factor prices all over the world.
4. Leontiff tested the H -O theory by using input -output tables for the
United States. Interestingly, his results showed that U.S. imports were
more capital -intensive than U.S. exports, the exact opposite of what
the theory predicted.
2.7 QUESTIONS
1. Critically examine 2 countries x 2 commodities x 2 factor s model of
international trade.
2. Examine the empirical evidence on H-O model.
3. Write a note on Leontief’s paradox.
munotes.in
Page 32
32 3
GAINS FROM INTERNATIONAL TRADE
Unit Structure :
3.0 Objectives
3.1 Terms of Trade: Types and Limitations
3.2 Types of Terms of Trade (TOT)
3.3 Gains from International Trade
3.4 Theory of Reciprocal Demand
3.5 Offer Curves Approach
3.6 Summary
3.7 Questions
3.0 OBJECTIVES
To study various types of Terms of Trade and its limitations
To understand Gains from International Trade concept
To study the evaluation of the Theory of Reciprocal demand
To understand the Offer curves approach
3.1 TERMS OF TRADE : TYPES AND LIMITATIONS
Terms of trade is the rate at which one country’s goods are exchange with
another country’s goods. It determines the prices of the goods traded in
foreign market. It expresses relationship between export prices and import
prices of a country. When a country’s export prices are more than its
import prices, then it is favourable to the country. Since its export prices
are more than export prices it can obtain more quantity of imports. So
there is a gain for the country. A country’s ter ms of trade said to be
unfavourable when its export prices are less than its import prices i.e. it
can obtain a small quantity of imports with its export prices or has to pay
more import prices.
Let us discuss the concept with the help of an example. Suppo se
Country A Country B
Corn (in
tonnes) Rice (in
tonnes) Corn (in
tonnes) Rice (in
tonnes)
Production 1000 800 100 300
Consumption 300 1000 700 100
Surplus/Deficit 700 (surplus) 200
(deficit) 600 (deficit) 200
(surplus)
Total 700 – 200 = 500 (su rplus) - 600 + 200 = -400 (deficit) munotes.in
Page 33
Gains from International Trade
33 Prices are assumed to be equal in this example. The nation with a surplus
stock is capable to meet its needs. In other words, there is a positive cash
flow and mor e capital is produced from exports than imports or Terms of
Trade is favourable to Country A.
3.2 TYPES OF TERMS OF TRADE (TOT)
1. Net Barter Terms of Trade:
It is also called as Commodity Terms of Trade. It is used to understand the
overall view of the chang es in the country’s trading in a better way. It is
calculated as a ratio between a country’s import and export prices i.e. as
the percentage ratio of the export unit value indexes to the import unit
value indexes, measured relative to the base year. It is m athematically
represented as,
T0 = Px / Pm
T0 → Commodity terms of trade
P → Prices and x and m → exports and imports
2. Gross Barter Terms of Trade:
Gross Barter Terms of Trade is the ratio of total physical quantity of
import to total physical quantity of export of a given country. In symbolic
terms:
TG = Qm / Qx
TG → Gross barter terms of trade
Qm → Total physical quantity of imports
Qx → Total physical quantity of exports
A higher value of T G indicate that the given country can import more units
of goods and services from abroad for the given uni ts of exports.
3. Income Terms of Trade:
Income Terms of Trade is defined as - commodity TOT multiplied by
quantity of export. Symbolically, income terms of trade can be written as:
Ty = (Px / Pm) Qx or Px × Qx / Pm
Ty → Income terms of trade
Px → Price of exports
Qx → Volume of exports
Pm → Price of imports munotes.in
Page 34
International Economics
34 Income Terms of Trade can increase through an increase in export prices
i.e. when there is rise in exports, and a decrease in import prices. It is
therefore used to measure a country’s capacity to impo rt.
4. Single factor Terms of Trade:
Single factor Terms of Trade is found by multiplying Net Barter Terms of
Trade with productivity index of domestic export sector. Symbolically,
Single factor Terms of Trade can be written as:
Ts = (Px / Pm) Zx
Ts → Incom e terms of trade
Px → Price of exports
Pm → Price of imports
Zx → Productivity index of domestic export sector
It is the net barter terms of trade corrected for changes in the productivity
of export goods.
5. Double Factorial Terms of Trade:
Double Factor ial Terms of Trade is calculated by multiplying Net Barter
Terms of Trade with the ratio of factor productivity of domestic industry
and foreign export industry. Symbolically, Double Factorial Terms of
Trade can be written as:
TD = T C (Zx / Zm)
TD → Doub le Factorial Terms of Trade
TC → Net Barter Terms of Trade / Commodity Terms of Trade
Zx → Productivity index in the domestic export sector
Zm → Import productivity index / Productivity index in the foreign
country’s export sector
It expresses the change in the productivity of both the domestic export
industry and the export industries of the foreign countries selected.
6. Real Cost Terms of Trade:
In case of an increase in export production drives resources are taken away
from the other sectors of the econo my to the export sector. In other words,
some common resources can be used by the export sector and also the
other sectors of the economy. But since these resources are used to
increase production of export the same cannot be used in other sectors of
the e conomy. Since these resources are sacrificed by the other sectors to
increase the export production, it involves some amount of disutility or
sacrifice. The amount of resources allocated elsewhere or utility cost per
unit of resources employed in the produ ction of export goods is considered munotes.in
Page 35
Gains from International Trade
35 to be the real cost terms of trade or the opportunity of exporting a good
into the exports production.
Real Cost Terms of Trade is measured by multiplying the single factor
Term of Trade by the index of the amount of dis utility. It is
mathematically represented as:
Tr = Ts × Rx
Tr → Real Cost Terms of Trade
Ts → Single factor Terms of Trade
Rx → disutility or real cost in producing export goods
7. Utility Terms of Trade:
Utility Terms of Trade measures the changes in the disutility or
dissatisfaction of producing a unit of exports. It also measures the changes
in the satisfactions arising imports and the indi genous products wasted to
produce those exports. In other words, it calculated the changes in the Real
cost ToT in terms of the utilities wasted.
It is therefore calculated by multiplying the real cost terms of trade index
with an index of the relative ave rage utility of imports and of domestic
commodities foregone. It is mathematically represented as:
Tu = Tr × U
Tu → Utility Terms of Trade
Tr → Real cost terms of trade index
U → Index of relative utility of imports and domestically foregone
commodities
3.2.1 Limitations of Terms of Trade
1. Problem of Index Numbers:
All types of terms of uses index number to measure the variations in the
prices of goods and services in different countries at different time. Many
time it becomes difficult to associate with the in dex numbers in terms of
its coverage, base year, and method of calculation.
2. Change in Quality of Product:
All types of terms of trade are based on the index numbers of export and
import prices of goods and services in participating countries. It fails to
take into consideration the changes taking place in the quality and
composition of goods entering trade between these countries. Generally,
terms of trade index show changes in the relative prices of goods exported
and imported in the base year. So, it fai ls to consider large changes in the
quality of goods that are taking place in the world, as also new goods that
are constantly entering in international trade. munotes.in
Page 36
International Economics
36 3. Problem of Selection of Period:
Terms of trade compare the changes in prices during a certain period
between the trading countries. The problem is about the selecting of this
period. In case of selected period, if it is too short then no meaningful
change may be found between the base and the present time. If the period
is too long then there may be structural changes could have been taken
place in the trading countries and therefore export and import commodity
content could not be compared.
4. Neglect of Import Capacity of a country:
The concept of terms of trade throws neglected capacity to impor t of a
participating country. In case of low terms of trade in India, with a given
quantity of Indian exports a smaller quantity of imports than before is
possible. If India’s export rises, may be due to fall in the prices of exports
then it may lead to ei ther increase of import capacity or it may remain
unchanged.
5. Not Helpful in Balance of Payment Disequilibrium:
The concept of terms of trade is applicable only if the balance of payments
of a country includes export and imports of goods and services. I f the
balance of payments includes unilateral payments or unrequired exports
and or/imports, such as gifts, remittances from and to the other country
leading to disequilibrium in the balance of payments, then the concept of
terms of trade is not helpful in measuring the gains from trade.
6. Ignores distribution of Gains from Trade between countries:
The concept of terms of trade fails to explain the distribution of gains from
trade between participating countries such as developed and developing
country. If the export price index of a developing country rises more than
its import price index, it means an improvement in its terms of trade. But
if there is an equivalent rise in profits of foreign investments, there may
not be any gain from trade.
3.3 GAINS FRO M INTERNATIONAL TRADE
International trade brings out several benefits to the trading countries. As
put forth in the comparative cost doctrine, if countries produce on the
basis of their specialization, then each country will make optimum use of
their resou rces by adding into their total output and income.
(a) Optimum use of natural resources:
Natural resources are scarce and having several uses. If we don’t use them
optimally then they will exhaust soon and there won’t be maximum
production. Therefore, a p rudent and careful use of the resources is
essential. International Trade makes the optimum use of these scarce
resources possible due to the comparative cost advantage in practice.
When a country produces a commodity at a lower cost than other
countries, it means it is using the existing resources carefully to produce munotes.in
Page 37
Gains from International Trade
37 more. In this way international trade helps each country to make optimum
use of its natural resources. Each country can concentrate on production of
those goods for which its resources are be st suited so that wastage of
resources will be avoided.
(b) Availability of all types of goods:
Due to scarcity of resources, it is not possible for the countries to produce
all types of goods in required quantities at a lower price. But international
trade made it possible to avail all types of goods by importing from the
other countries.
(c) Specialisation:
International trade leads to specialisation. So, it encourages production of
different goods in different countries on the basis of their specialisat ion.
Goods can be produced at a comparatively low cost due to advantages of
division of labour.
(d) Advantages of large -scale production:
In the absence of international trade countries used to produce for
domestic consumption in limited quantity. In inter national trade countries
produce goods not only for domestic consumption but also for export
purpose i.e. to meet the demand of foreign consumers at large. It therefore
increases their total production where goods are produced in large scale.
So the benefi ts of large scale production are enjoyed by all the
participatory countries in international trade.
(e) Establishment of new industries and technology transfer:
In international trade countries are encouraged to establish new industries
with imported mac hinery, equipment and technical know -how from the
industrially advanced countries. This helps in the rapid economic
development of the underdeveloped and developing countries.
(f) Increase in efficiency:
In international market, participating countries att empt to produce better
quality goods at minimum possible cost due to stiff competition between
the countries. It leads to increase in overall efficiency and benefits to the
consumers.
(g) Development of transport and communication facilities:
With the est ablishment of new industries and increase in large scale
production, transportation and communication facilities also developed
rapidly due to international trade.
(h) International co-operation and understanding:
For successful international trade, coope ration and understanding between
people of different countries is required. Interaction and exchange of ideas
on regular basis leads to cordial relations between participant countries. It
is beneficial to maintain international peace. munotes.in
Page 38
International Economics
38 3.4 THEORY OF RECIPRO CAL DEMAND
The idea of Reciprocal demand was presented by John Stuart Mill in1873
and then it was further developed by Alfred Marshall. Reciprocal demand
means the relative strength and elasticity of demand of the two trading
countries for each other’s product in terms of their own product. The
theory advocated that the actual price at which trade takes place between
two countries depends on the trading countries interacting demands. It
works similarly as the demand and supply of goods and services in any
other market. If demand does not equal to supply in the international
market, the international price will change until it becomes equal. Thus,
equalization of terms of trade depends on the demand and supply
conditions for goods and services in the internat ional market. So the
equilibrium terms of trade is determined by the equation of reciprocal
demand. A stable ratio of exchange is therefore determined by the
equilibrium value of imports and exports of each country.
Theory of reciprocal demand is based on the following assumptions -
(i) Full employment conditions – it assumed that all the resources are
fully employed.
(ii) Perfect competition – exists in the international market.
(iii) Free foreign trade – it assumed no restrictions are imposed on
foreign trade.
(iv) Free mobility of factors – all the factors of production are mobile.
(v) Applicability of the theory of comparative cost – the trade between
the two countries is based on the theory of comparative cost i.e.
production based on specialization.
(vi) Two country, two commodi ty model – it assumed for simplicity that
the trade takes place between two countries and related to two
commodities.
Changes in Demand and Supply Conditions:
The theory of reciprocal demand analysed the impact of changes in supply
and demand conditions on the terms of trade.
A. Changes in Supply Conditions:
Supply conditions changes due to several causes such as cost-reducing
improvements in technology which bring changes in terms of trade. For
e.g. an improvement in the textile industry in England increases the
productivity due to which cloth will be cheaper in terms of India’s wheat
i.e. the same amount of wheat is exchanged for more cloth. It thus makes
the terms of trade in favour of India’s importer of cloth in exchange for
wheat.
B. Changes in Demand Condi tions:
The extent to which the barter terms of trade change depend on the
increased production in exporting country. It also depends on the munotes.in
Page 39
Gains from International Trade
39 importing country’s elasticity of demand for imports in terms of its
exports. In our example suppose,
(i) If elastic ity of demand for England’s cloth in terms of India’s own
wheat is more elastic (e 1), then the barter terms of trade will change in
favour of India. It can be more than the fall in price of cloth in terms of
wheat.
(ii) In case of unitary elastic deman d (e = 1), the barter terms of trade turn
in favour of India which is equal to the fall in the price of cloth in terms of
wheat.
(iii) If elasticity of India’s demand for cloth in terms of wheat is less
elastic (e 1), then the barter terms of trade will change in favour of India
less than the fall in the price of cloth in terms of wheat.
Measurement of Reciprocal Demand Elasticity:
The reciprocal demand elasticity refers to the ratio of proportional change
in the quantity of imports demanded to the propor tional change in the
price of exports relative to the price of imports. Thus, elasticity of
reciprocal demand -
Where e → elasticity of reciprocal demand
∆ M → change in quantity of imports
∆ Px→ change in price of exports
∆ Pm → change in quantity of imports
Criticism of the Mill’s Theory of Reciprocal Demand:
The theory of reciprocal demand has been criticised on the following
grounds:
(i) The very first point of criticism is that the theory is based on unrealistic
assumptions such as perfect competition and full employment.
munotes.in
Page 40
International Economics
40 (ii) In reality, actual trade is not restricted to two country, two commodity
model but between many countries and many commodities.
(iii) Mill theory concentrates on the aspect of elasticity of demand, and
thus neglected the impact of elasticity of supply. According to the modem
economists, terms of trade (ToT) are generally influenced by elasticity of
demand for exports and imports, elasticity of supply of exports, and
imports.
(iv) Graham has criticised the reciprocal demand aspect of Mill’s theory
by stating that it has exaggerated the role of reciprocal demand and
neglected the comparative cost conditions in determining the terms of
trade.
3.5 OFFER CURVES APPROACH
The offer curves approach is a geometrical technique which uses graphical
representation to determine the equilibrium terms of trade. This technique
is developed by Marshall. Offer curve is a demand curve which shows the
demand for one commodity in terms of the supply of another commodity.
Generally, it is the demand for import of one commodity in terms of the
supply of export of another commodity.
Let us assume that India and Engla nd, these two countries are trading
partners. India produces only wheat and England only cloth. In the
following diagram, India’s offer curve is presented as OI. It indicates
India’s demand for cloth in terms of wheat. It represents the quantities of
wheat which India is willing to offer in exchange for England’s cloth.
India is willing to offer less and less amount of wheat in exchange for
more and more quantity of cloth. It is seen in the figure that for KW
quantity of cloth India is willing to offer OW quantity of wheat.
Fig 3.1
munotes.in
Page 41
Gains from International Trade
41 England’s offer curve is represented as OE in the diagram which
represents the quantity of cloth England is willing to offer in exchange of
India’s wheat. As it is seen in the diagram England is willing to offer CW
quantity of cloth for OW quantity of wheat to India. T is the equilibrium
point where OIand OE i.e. offer curves of India and England respectively
intersect. The reciprocal demand at this point is equal thereby TP quantity
of England’s cloth is exchanged for OP quantity of India’s wheat. Line OT
represents terms of trade (ToT) line between two countries.
Effect of Change in Supply:
Due to improvement in technology if cost of producing cloth in England
reduces then offer curve of England will shift to the left and OE 1 is
England’s new offer curve. With this shift now England is willing to offer
C1W cloth for OW wheat, i.e. more cloth by C1C for same quantity of OW
wheat. The terms of trade (ToT) change is in favour of India as a result of
this improvement.
Effect of Change in Demand:
The extent of change in terms of trade is also depend upon the slope of
India’s offer curve. India’s offer curve slopes positively after point T.
Thus TI represents India’s more elastic demand for cloth in terms of
wheat. It makes the terms of trade in favour of India more than the fall in
cloth’s price in terms of wheat.
Suppose India’s offer curve becomes a vertical straight line after point T
(i.e., TI1), then it shows unitary elastic demand for cloth in terms of wheat
and the terms of trade (ToT) will change in favour of India equal to the
fall in cloth price in terms of wheat. And if India’s offer curve slopes
backward then after point T (i.e., TI2), the terms of trade (ToT) will
change in favour of India more than the fall in price of doth relative to
wheat.
3.6 SUMMARY
1. Terms of trade is the rate at which one country’s goods are exchange
with another country’s goods. It determines the prices of the goods
traded in foreign market. It expresses relationship betw een export
prices and import prices of a country.
2. International trade brings out several benefits to the trading countries.
As put forth in the comparative cost doctrine, if countries produce on
the basis of their specialization then each country will m ake optimum
use of their resources by adding into their total output and income.
3. Reciprocal demand means the relative strength and elasticity of
demand of the two trading countries for each other’s product in terms
of their own product. The theory advo cated that the actual price at
which trade takes place between two countries depends on the trading
countries interacting demands. munotes.in
Page 42
International Economics
42 4. The offer curves approach is a geometrical technique which uses
graphical representation to determine the equilibrium terms of trade.
This technique is developed by Marshall. Offer curve is a demand
curve which shows the demand for one commodity in terms of the
supply of another commodity.
3.7 QUESTIONS
1. Explain briefly various types of Terms of Trade and its limitations.
2. Discuss the concept of gains from international trade.
3. Critically evaluate the Theory of Reciprocal demand.
4. Write a note on Offer Curve approach.
munotes.in
Page 43
43 Module 2
4
COMMERCIAL POLICY
Unit Structure:
4.0 Objectives
4.1 Meaning and objectives of Commercial Trade Policy
4.2 Meaning, advantages, and disadvantages of Free trade
4.3 Meaning, advantages, and disadvantages of Protection
4.4 Meaning, Types and Effects of tariffs
4.5 Non-tariff barriers
4.6 Summary
4.7 Questions
4.0 OBJECTIVES
1) To understand the concept of commercial trade policy and its
objectives
2) To analyse the advantages and disadvantages of free trade
3) To analyse the advantages and disadv antages of Protection
4) To discuss the concept of tariff, types and its effects.
5) To understand the concept of non -tariff barriers
4.1 MEANING AND OBJECTIVES OF COMMERCIAL
TRADE POLICY
4.1.1 Meaning
A commercial policy or trade policy refers to a govern ment’s policy in
relation to a country’s international trade. It can be described as the
regulations and policies that govern how companies and individuals in one
country carry out trade and commerce with companies and individuals in
other countries.
4.1.2 Objectives
The following are some of the objectives of the commercial trade policy of
a country
1 To increase volume of trade with other countries.
2 To promote and encourage exports based on the comparative advantage
of the country.
3 To expand production of goods and services and enjoy economies of
scale . munotes.in
Page 44
International Economics
44
4 To encourage the development of domestic industries.
5 To adopt protectionist policies for protecting domestic industries and
preserving foreign exchange reserves.
6 To achieve diversification of domestic industries and Self sufficiency
7 To maintain favourable balance of payment by adopting protectionist
policies.
8 To conduct trade with other countries based on mutual benefits
forparticipating countries.
4.2 MEANING, ADVANTAGES AND DISADVANTAGES
OF FREE TRADE
4.2.1 Meaning
Free trade policy promotes free movement of goods and services between
nations. Under a free trade policy, goods and services can be bought and
sold across international borders with little or no government tariffs,
quotas, subsidies, or prohibitions to inhibit their exchange. The concept of
free trade is the opposite of trade protectionism or economic isolationism.
The classical economists Adam Smith and David Ricardo were the
champions of free trade. According to Adam Smith, tariffs s hould be
removed in order to enjoy the benefits of Free trade.
4.2.1 Advantages of Free Trade
Free Trade enables free movement of goods and services between
countries. Following are the advantages of Free Trade.
1) Advantages of Specialization:
Firstly, fre e trade ensures all the advantages of international division of
labour. Each country will specialize in the production of those goods in
which it has a comparative advantage over its trading partners. This will
lead to an efficient utilization of resources and, hence, cost reduction in
production.
2) All-Round Prosperity :
Secondly, because of free trade between countries, global output increases
since specialization, efficiency, etc., make production large scale. Free
trade enables countries to obtain goods a t a cheaper price. This leads to a
rise in the standard of living of people of the world. Thus, free trade leads
to higher production, higher consumption and higher all -round
international prosperity.
3) Helps to develop Competitive Spirit:
Thirdly, free trad e infuses the spirit of competition in the economy. As
there exists the possibility of intense foreign competition under free trade, munotes.in
Page 45
Commercial Policy
45 domestic producers do not want to lose their grounds. Competition
enhances efficiency. Moreover, it tends to prevent creati on of domestic
monopolies and give choice to the consumers.
4) Availability of Goods and Services:
Fourthly, free trade enables each country to get commodities which it
cannot produce at all or can only produce at a higher cost. Commodities
and raw materials unavailable domestically can be procured through free
movement even at a low price.
5) Encourages International Cooperation:
Fifthly, free trade safeguards against discrimination. Under free trade,
there - is no scope for cornering raw materials or commoditie s by any
country. Free trade can thus promote international peace and stability
through economic and political cooperation.
6) Free from government Interference:
Finally, free trade is free from bureaucratic inter ferences. If a country
follows free trade pol icy, it will have less government intervention in
trade. Bureaucracy and corruption are very much associated with
protectionism type of trade policy.
4.2.2 Arguments against Free Trade:
Despite these virtues, several people justify trade restrictions.
Following arguments are put forth against free trade:
1) Disadvantageous for Least Developing Countries:
Firstly, free trade may be advantageous to the advanced countries but not
to the economically backward countries. Free trade has brought enough
misery to the poor, less developed countries, if past experience is any
guide. India was a classic example of colonial dependence of UK’s
imperialistic power prior to 1947.
2) Destruction of domestic Industries/Products:
Secondly, it may ruin domestic industries. Becaus e of free trade, imported
goods become available at a cheaper price. Thus, an unfair competition
develops between domestic and foreign industries. In the process,
domestic industries are badly affected.
3) Lack of all-round development:
Thirdly, Free trade c annot bring all -round development of industries.
Compara tive cost principle states that a country specializes in the
production of a few commodities. On the other hand, inefficient industries
remain neglected. Thus, under free trade, an all -round developm ent is
ruled out. munotes.in
Page 46
International Economics
46 4) Danger of Overdependence:
Fourthly, free trade brings in the danger of dependence. A country may
face economic depression if its international trading partner suffers from
it. The Great Depression that arose in 1929 -30 in the US economy swept
all over the world and all countries suffered badly even if their economies
were not caught in the grip of the then Depression. Overdependence can
also lead to political dominance of more powerful countries over
economically less developed countries.
5) Harmful Foreign Goods:
Finally, a country may have to change its consumption habits. Because of
free trade, harmful , poor quality products are dumped by multinational
corporations in underdeveloped countries. This affects the local industries
and lead to loss of consumer welfare. To prevent such, restrictions on
trade are required to be imposed.
In view of all these arguments against free trade, governments were
encouraged to resort to some kind of trade restrictions to safeguard
national interest.
4.3 MEANING, ADVANTAGES AND DISADVANTAGES
OF PROTECTION
4.3.1 Meaning
Protectionism is the policy of protecting domestic industries against
foreign competition by using tariffs, import quotas, subsidies and any
other measure to restrict imports or make them more expensive. The
purpose is to use protectionist policies to protect their domestic industries.
4.3.2 Advantages of protection
We discuss various advantages of following protectionism policy:
1. Infant Industries argument : The infant industry argumen t suggests
that new industries should be given temporary protection in order to
enable them to build up this capacity to compete. This argument applies
where the industry is small and young, and where costs are high.
According to this argument, there are s ome industries in which a country
would really have comparative advantages if and only if it could get them
started. If faced with foreign competition, such infant (young and
growing) industries would not be able to pass the initial period of
experience an d financial stresses.
But given protection for a short period, they can be expected to develop
economies of mass production and they would ultimately be able to face
foreign competition without protection. So, at the infant stage such indus -
tries should be protected for a period till they can face competition
independently. This argument is now widely accepted in India as a good
ground of protection for a temporary period for promoting home industries
at the early stages. munotes.in
Page 47
Commercial Policy
47 2. Diversification of Industries Argument : A policy of protection is
advocated to diversify a developing country’s industrial structure. A
country cannot rely on one or a few industries only; it is necessary that a
large number of industries of diverse varieties develop in the long run.
This strategy will reduce the risk of losing foreign markets; for, in case of
failure to export one commodity, other goods may be exported.
3. Employment Protection : The dynamics of the world economy mean
that at any time some industries will be in decline. I f those industries were
responsible for a significant amount of employment in a country in the
past, their decline would cause problems of regional unemployment. There
s justification for a country to protect a contracting industry to slow down
its rate of decline so that time is given for people to find jobs elsewhere in
the economy.
4. Employment Creation: Protection to home industries may create em -
ployment opportunities in the country, and thus reduce the magnitude of
unemployment. Protection can increa se employment in another way. By
improving the balance of trade it can increase employment and income
provided the other countries do no retaliate.
5. Balance of Trade: Some countries experience imbalance in their trade
with the rest of the world. If they are importing too many goods they may
correct a temporary problem by imposing tariffs on imports. A suitable
tariff policy can create and maintain a favourable balance of trade. The
restrictions on imports for the purpose of protection will create a surpl us in
the balance of trade of the country.
6. Dumping: Dumping is a problem which confronts many countries. It is
an example of price discrimi nation at the international level. By following
the practice of dumping foreign sellers try to capture the home market by
selling their goods at low prices.
Protection of home industries is necessary to resist such a policy. It refers
to the selling of products on overseas markets at prices below those
prevailing on domestic markets. The danger here is that the dump ing of
products could cause prices to drop drastically.
This could benefit the consumers in the short run. But, in the long run,
domestic producers could be forced out of business making room for the
foreign suppliers in the future. Therefore, the effects of dumping are
undesirable and, if it can be detected, some protection against its adverse
effects is justified.
7. Improving the Terms of Trade: Countries can improve their position
when they are the sole (or dominant) buyer of a commodity. This is rare,
but if American importers of tea agreed with one another to restrict
imports’ then the world price would fall. Of course, this would lower the
incomes received by the producers of tea and so might be thought
undesirable as they are mostly poor countries. munotes.in
Page 48
International Economics
48 8. Retaliation: Protecting an industry as a retaliation for protection
introduced by other countries is questionable. It was used by the USA
when it felt that the European Union was using hidden subsidies to lower
the price of steel exported to the USA.
9. Unfair Foreign Competition: Often countries follow a policy of
protec tionism against unfair foreign competition. ‘Unfair’ competition can
take a variety of forms. Sometimes, foreign governments can subsidise
their export industries. This means that domest ic industries cannot
compete fairly.
Similarly, foreign firms may ‘dump’ their products overseas, either
because they cannot be sold on their domestic market, or in order to
destroy competitor. They could then increase their prices and make large
profit Co untries also require protection against low -cost imports. It is
often argued that domestic industries need a period of protection in order
to develop.
10. National Defence Argument: Industries which are essential for the
defence (e.g., arms and ammunition s, military equipment, etc.) of the
coun try are to be protected to preserve the national independence of a
country. The policy of protection adopted in India after independence
prescribed protection for defence industries at any cost.
11. Self-Sufficiency Argument: Protection is also advocated to attain
self-sufficiency in essential goods. The industries which are essential for
national self -sufficiency are to be protected. This is really a convincing
argument for protection in developing countries like In dia. In fact, national
interest is the sole criterion for granting protection to industries in such
countries.
4.3.3 Disadvantages
1. Obstacle to free trade : It creates obstacles or barriers to free
multinational trade. Due to high tariffs imposed by other co untries, a
country is not allowed to produce goods in which it has cost
advantages. So, protection reduces world production and con sumption
of internationally traded goods.
2. Inefficient resource allocation : The imposition of tariff economic
efficiency. The domestic producers do not have to reduce cost and
improve their productivity. In the long run, they become less
competitive and find it difficult to compete at global level.
3. Disadvantage to domestic consumers : Owing to higher tariff on
imports, the consum ers are compelled to buy home goods, often of
inferior quality and often at higher prices. This leads to loss of
consumer welfare.
4. Protection to weak home industries : Protection gives shelter to
undeserving home industries. Protection leads to inefficienc y in
domestic industries. Industries keeps relying on government protection
and they do not feel the need to improve their competitiveness.
Protection also creates political corruption and vested interest. munotes.in
Page 49
Commercial Policy
49 5. Diversification not always possible : Complete di versification of
industries is difficult to achieve for any country. Every country does
not possess all resources like natural, human or financial to bring about
large scale diversification. A country cannot produce all its
requirements in an efficient man ner through domestic production.
Countries will prefer to import goods at lower prices from other
countries.
6. Labour not the only factor of production : It is argued that countries
with high labour costs imports goods from those with low labour costs,
the labour in the high costs countries being paid high income. But
labour is not the only factor of production. When a country adopts
capital intensive techniques of production, it will reduce its average
cost despite high costs. On the other hand, countries w ith low costs
tend to use labour intensive techniques which usually have low
productivity and high cost. Thus, advanced countries pay higher wages
due to high labour productivity. low wages do not necessarily mean
low cost as the real cost of labour will b e high due to low productivity.
7. Retaliation by other countries: Protection may lead to trade wars and
international conflicts among trading nations
4.4 MEANING, TYPES AND EFFECTS OF TARIFFS
4.4.1 Meaning of Tariffs:
A tariff is a duty or tax imposed by t he government of a country upon the
traded commodity as it crosses the national boundaries. Tariff can be
levied both upon exports and imports. The tariff or duties imposed upon
the goods originating in the home country and scheduled for abroad are
called as the export duties. Countries, interested in maximising their
exports generally avoid the use of export duties. Tariffs have, therefore,
become synonymous with import duties.
The import duties or import tariffs are levied upon the goods originating
from abroad and scheduled for the home country. The imposition of
import tariff results in the relative changes in prices of products and
factors. That brings about a significant change in the structure of
international trade. High tariffs certainly have the ef fect of restricting the
volume of international trade.
4.4.2 Types of tariffs
Tariffs are of several types and these can be classified into different
groups as below:
(1) On the basis of the criterion for imposition of tariffs.
These can be of such types as:
(a) Specific tariff,
(b) Ad Valorem tariff,
(c) Compound tariff and
(d) Sliding scale tariff. munotes.in
Page 50
International Economics
50 (a) Specific Tariff:
Specific tariff is the fixed amount of money per physical unit or according
to the weight or measurement of the commodity imported or ex ported.
Such duties can be levied on goods like wheat, rice, fertilisers, cement,
sugar, cloth etc. Specific duties are quite easy to administer, as they do not
involve the evaluation of the goods.
The determination of the value of the traded goods may be difficult as
there are several variants of price such as demand price, supply price,
market price, contract price, invoice price, f.o.b, (free on board) price, c.i.f
(cost, insurance, freight) price etc. The resort to specific duties enables the
government to keep out of complexities of prices.
(b) Ad Valorem Tariff:
When the duty is levied as a fixed percentage of the value of the traded
commodity, it is called as valorem tariff. Such duties are levied on the
products the value of which is disproportionat ely higher compared to their
physical characteristics such as weight or measure ment.For instance, if the
import of watches is subject to 70 percent ad valorem tariff, a watch
valued at Rs. 1000 will be subject to a duty of Rs. 700 and a watch valued
at Rs . 1200 will be subject to a tariff amounting to Rs. 840. The ad
valorem duties have an additional advantage that the international
comparison of tariffs, in their case, can be easily made.
(c) Compound Tariff:
The compound tariff is a combination of specif ic and ad valorem tariff.
The structure of compound tariff includes specific duty on each unit of the
commodity plus a percentage of ad valorem duty. The compound tariffs
not only impart a greater elasticity to revenues but also assure a more
effective pro tection to the home industries.
(d) Sliding Scale Tariff:
The import duties which vary with the prices of the commodities are
termed as sliding scale duties. These may either be on specific or ad
valorem basis. In practice, these are generally on a specifi c basis.
(2) On the basis of purpose of levying the tariff. These can be of two
types:
(a) Revenue Tariff and
(b) Protective Tariff.
(a) Revenue Tariff:
The tariff, which is imposed primarily for generating more revenues for
the government is called as the revenue tariff. In the less developed
countries, there is reliance of the governments on this source of revenue.
munotes.in
Page 51
Commercial Policy
51 (b) Protective Tariff:
The tariff may be imposed by the government to protect the home
industries from the cut -throat competition from the f oreign produced
goods. The higher the tariff, greater may be the protective effect of tariff.
(3) If the tariff is influenced by the consideration of discrimination.
There can be two types of tariffs -
(a) Non -discriminatory and
(b) Discriminatory.
(a) Non-Discriminatory Tariff:
If the uniform tariff rates are applicable to all the commodities irrespective
of the country of origin, these are known as non -discriminatory tariffs.
Such a system of non -discriminatory tariff is called as single column tariff.
This system of tariff is easy and simple to administer. There is, however,
one deficiency that it is not elastic enough to adjust according to the
changing needs of the industries of the home country. From the viewpoint
of revenues too, it may not be satisfa ctory for the tariff -imposing country.
(b) Discriminatory Tariff:
In case of discriminatory tariff, the varying tariff rates exist for different
commodities. The products originating from favoured countries are
subject to a lower tariff rate than those of other countries. The
discriminatory tariffs can be double or multiple column tariffs.
The double column tariff can be further classified as:
(i) General and conventional tariff
(ii) Maximum and minimum tariff
(iii) Multiple Column Tariff.
(i) General and Conventional Tariff:
The general tariff schedule is determined by the state legislature. It also
makes provision for the adjustment in tariff rates as and when required to
fulfill the obligations of international commercial agreements. The
conventional tari ff schedule is evolved through the commercial
agreements of the home country with other countries. It does not permit
changes in tariff rates according to the changes in domestic conditions or
requirements.
The changes can be possible only after negotiatio ns and agreements are
reached between the concerned countries or after the expiry of the existing
agreement. There is some rigidity in the conventional tariff schedule. In
contrast, the general tariff schedule is more flexible
munotes.in
Page 52
International Economics
52 (ii) Maximum and Minimum Tariff:
Under this system, a country has maximum and minimum tariff rates for
every commodity. These tariff rates are fixed by the legislature and the
government is authorised to apply specific rates of tariff to the goods
imported from the different countrie s. The minimum tariff rates are
applied to the products originating from the countries treated as ‘The Most
Favoured Nations’. The maximum tariff rates are applied for the purpose
of improving the bargaining position of the home country vis -a-vis the
forei gn countries.
(iii) Multiple Column Tariff:
The multiple column tariff consists of three different rates of tariff – a
general rate, an international rate and a preferential rate. The general and
international tariff rates can be considered equivalent to t he maximum and
minimum tariff rates discussed above. The preferential tariff is generally
applied by a subject country to the products originating from the countries.
(4) Classification on the Basis of Products:
Whether a product is imported or exported ca n be the basis of tariff.
On this basis, the tariffs can be of the types of:
(a) Import duties and
(b) Exports duties.
(a) Import Duties:
If the home country imposes tariff upon the products of the foreign
countries as they enter its territory, the tariff is known as import tariff or
import duty.
(b) Export Duties:
If the products of the home country become subject to tax as they leave its
territory to be sold in the foreign market, the tax or duty is called as export
tariff or export duty.
The import tarif fs have remained the matter of deep interest both for
analytical and policy reasons. These are far more wide -spread, and almost
every country takes resort to them. In contrast, the export duties are
applied to a very limited extent. Some countries like the USA have
prohibited export duties by law. Even in those countries, where these are
in vogue, the basic purpose is to secure larger revenues.
(5) Classification on the Basis of Retaliation:
On this basis, the tariffs can be of the types of
(a) Retaliatory tariffs and
(b) Countervailing tariffs. munotes.in
Page 53
Commercial Policy
53 (a) Retaliatory Tariffs:
If a foreign country has imposed tariffs upon the exports from the home
country and the latter imposes tariffs against the products of the former,
the tariffs resorted to by the home country will be regarded as the
retaliatory tariffs. The home country, while adopting this measure does not
either has the object of raising revenues or protecting home industries but
of acting in retaliation.
(b) Countervailing Tariffs:
If the foreign country has been exporting large quantities of its products in
the market of the home country on the strength of export subsidies, the
home country can neutralise the ‘unfair advantage’ enjoyed by foreign
products through imposing duties upon them as they enter the t erritory of
the home country. The latter has full justification for resorting to these
countervailing duties in order that the unfair advantage given by exports
subsidies to the foreign products is offset and the competition takes place
on equal footing be tween the foreign and home produced goods.
4.4.3 Effects of tariffs
Tariffs have economic effects on the country that imposes tariffs.
According to Kindleberger, there are eight effects of tariffs. The effects of
tariffs are based on following Assumptions :
Assumptions:
(i) The demand and supply curves of the given commodity are concerned
with home country that imposes import tariff.
(ii) The given demand and supply curves remain constant.
(iii) There is no change in consumers’ tastes, prices of other commodities
and mone y income of the consumers.
(iv) There is an absence of technological improvements
Fig. 4.1 Effect of Tariff munotes.in
Page 54
International Economics
54 1. Protective Effect:
The imposition of tariff may be intended to protect the home industry from
the foreign competition. As tariffs restrict the flow of foreign products, the
home producers find an opportunity to increase the domestic production of
import substitutes.
In Fig. 1, demand and supply are measured along the horizontal scale and
price along the vertical scale. D and S are the domestic demand and supply
curves of the given commodity respectively. Originally PW is the world
supply curve of the commodity and the pre -tariff price is OP. At the price
OP, the domestic supply is OQ and demand is OQ 1.
The gap QQ 1 between demand and supply is met thro ugh import of the
commodity from abroad. If PP 1 per unit tariff is imposed on import, the
price rises to OP 1 and world supply curve shifts to P 1W1. At this higher
price, the demand is reduced from OQ 1 to OQ 2 whereas the domestic
supply expands from OQ to O Q3.QQ 3is the Protective Effect of tariff.
2. Consumption Effect:
The imposition of import duty on a particular commodity has the effect of
reducing consumption of the consumers. According to Fig. 1 at the free
trade price OP, the total consumption was OQ 1. It was constituted by OQ
as the consumption of home produced good and QQ 1 as the consumption
of foreign produced good. After the imposition of tariff, when price rises
to OP 1, the consumption is reduced from OQ 1 to OQ 2. Q1 Q2 is the
Consumption effects of tariff.
3. Revenue Effect:
The imposition of import duty provides revenues to the government.
When PP 1 per unit tariff is imposed, the revenue receipts of the
government can be determined by multiplying per unit tariff PP 1 (or BF)
with the quantity import ed Q 3Q2 or (EF). Thus, the revenue receipts due to
tariff amount to PP 1 × Q 3Q2 = BF × EF = BCEF. This is revenue effect of
tariff.
4. Redistributive effect :
The imposition of tariff, on the one hand, causes a reduction in consumer’s
satisfaction and, on the other hand, provides a larger producer’s surplus or
economic rent to domestic producers and revenues to the government.
Thus, tariff leads to redistributive effect in the tariff -imposing country.
The redistributive effect can be shown with the help of Fig. 1.
Loss in Consumer’s Surplus = RHP – RCP 1 = PHCP 1
Gain in Producer’s Surplus = TBP 1 – TAP = PABP 1
Gain in Revenues to the Government = BCEF
Net Loss = PHCP 1 – (PABP 1 + BCEF)
= ΔBAF + ACEH munotes.in
Page 55
Commercial Policy
55 Kindelberger calls this net loss as the “deadweight loss” due to tariff. It
signifies the cost of tariff. It is clear that tariff causes a redistribution of
income or satisfaction in the given country. Consumers suffer a loss while
producers and government make a gain.
5. Terms of Trade Effect:
The terms of trade ef fect depend upon the elasticities of demand and
supply of products of the two trading countries.
If the foreign supply of a good is perfectly elastic or if the foreign
suppliers are ready to supply the product at a constant price, the
imposition of tariff is not likely to improve the terms of trade for the tariff -
imposing country. In case the foreign supply of a good is not perfectly
elastic, the imposition of tariff can have varying effects upon the terms of
trade of the tariff -imposing country depending u pon the elasticities of
demand and supply in the two trading countries.
6. Competitive Effect:
The increase in the competitive power of the domestic industries through
tariff is called as the competitive effect. The imposition of tariff, can
facilitate the growth of an infant industry which otherwise is not in a
position to face the foreign competition. As tariff makes the foreign
product relatively more costly, the domestic infant industry finds
opportunity to grow behind the protective shield. Thus tariff increases the
competitive power of the industries of tariff -imposing country.
7. Income Effect:
The imposition of tariff reduces the demand for foreign products. If there
is the existence of surplus productive capacity in the home country, switch
of expen diture from foreign to home -produced goods will lead to a rise in
production, employment and income.
8. Balance of Payments Effect:
When tariff is imposed by a country upon foreign products, the home -
produced goods become relatively cheaper than the import ed goods. The
price effect caused by tariff, on the one hand, reduces imports from other
countries and on the other hand, causes increased production and purchase
of home - produced goods. That leads to a reduction in the balance of
payments deficit of the home country.
4.5 NON -TARIFF BARRIERS
4.5.1 Meaning of Import Quotas
The import quota means physical limitation of the quantities of different
products to be imported from foreign countries within a specified period ,
usually one year. The import quota may be fixed either in terms of
quantity or the value of the product. munotes.in
Page 56
International Economics
56 4.5.2 Types of import quotas
The system of import quotas may be classified into five major types.
(1) The tariff or custom quota,
(2) The unilateral quota,
(3) The bilateral quota,
(4) The mixing quota, and
(5) Import licensing.
1. The Tariff Quota:
Under this system, import of a commodity up to a specified quantity is
allowed to be imported duty -free or at a special low rate of duty. But
imports in excess of this fixed limit are charged a h igher rate of duty. The
tariff quota thus combines the features of a tariff with those of quota.
Flexibility is another advantage of this system.
2. The Unilateral Quota:
Under this system, a country places an absolute limit on the importation of
a commodi ty during a given period. It is imposed without prior negotiation
with foreign governments.
The quota so fixed may be either global or allocated. Under global quota,
the commodity can be imported from any country up to the full amount of
the quota. Under a n allocated quota system, however, the total of the quota
is distributed among specified supplying countries.
3. The Bilateral Quota:
Under this system, quotas are set through negotiation between the
importing country and the exporting country (or foreign export groups).
Quotas are decided by mutual agreement. It minimises the suspicion of
discrimination. It is less arbitrary, and, therefore, arouses less or no
opposition from the exporting countries. Thus, it provokes no retaliation
activity.
4. The Mixing Quota:
It is a type of regulation which requires producers to utilise a certain
proportion of domestic raw materials along with imported parts to produce
finished goods domestically.
It thus sets limits on the proportion of foreign -made raw materials to b e
imported and used in domestic production.
Such mixing regulations have two broad objectives:
(i) To assist domestic producers of raw materials, and
(ii) To save scarce foreign exchange. munotes.in
Page 57
Commercial Policy
57 5. Import Licensing:
The mechanism of import licensing has been evo lved as a system devised
to administer quota regulations. Under this, prospective importers are
required to obtain a licence from the proper authorities for importing any
quantity within the specified quotas. Licences are generally distributed
among establ ished importers keeping in view their share in the country’s
import trend.It provides much closer control over the volume of imports.It
tends to minimise speculative activity. It reduces excessive fluctuations in
prices produced by the scramble to import b efore the quota is filled (in the
absence of licensing system) It allows a high degree of flexibility in the
restriction of imports.
4.5.3 Effects of Quotas
The import quotas can have various effects such as price effect, protective
or production effect, c onsumption effect, revenue effect, redistributive
effect, terms of trade effect and balance of payments effect.
The effects of import quotas can be discussed with the help of Fig.2. In
this figure, S 0 is the foreign supply curve under free trade and it is
perfectly elastic. S 1 is the domestic supply curve which slopes positively.
D is the demand curve for the given commodity and it slopes negatively.
The quantity demanded and supplied of the given commodity is measured
along the horizontal scale and price i s measured along vertical scale.
In the conditions of free trade, the quantity supplied is OQ and the
quantity demanded is OQ 1. The excess of demand over supply is met
through the import from abroad.
Figure 4.2: Effect of Quota
1. Price Effect:
Import qu ota is the direct physical limitation of the quantity of the given
commodity imported from the foreign country. The enforcement of import
quota restricts its availability in the home market and creates shortage and munotes.in
Page 58
International Economics
58 consequent rise in its price. Originally, the price of the commodity was Po
and the quantity imported amounted to QQ 1. The government of the home
country fixes the import quota to the extent of Q 2Q3.
The initial total supply in the home market, made up of OQ as the
domestic output and QQ 1 as the import, amounted to OQ + QQ 1 = OQ 1.
After the enforcement of import quota, the total supply is OQ 3 out of
which domestic production is OQ 2 and import quota is Q 2Q3 (OQ 3 =
OQ 2 + Q 2Q3). It signifies a shortage of the commodity compared with the
original situ ation. As a consequence, given the supply OQ 3 and demand
curve D, the price rises from P 0 to P 1. This rise in the price of the
commodity is the price effect of import quota.
2. Protective or Production Effect:
An import quota has a protective effect. As it reduces the imports, the
domestic producers are induced to increase the production of import
substitutes. The increased domestic production due to import quota is
called as the protective or production effect. According to Fig.2, originally
the domestic p roduction was OQ. After the import quota is fixed at Q 2Q3,
the domestic production expands from OQ to OQ 2. Thus there is an
increase in domestic production by QQ 2. This is the protective or
production effect.
3. Consumption Effect:
After the import quota i s prescribed, there is a rise in the domestic price of
the given commodity. As a consequence, the consumption of the
commodity gets reduced. This is known as the consumption effect. In
Fig.2, the consumption under free trade situation is OQ 1. After the fix ation
of import quota up to Q 2Q3, the total consumption at the higher price P 1 is
reduced to OQ 3. Thus there is a reduction in consumption by OQ 1 – OQ 3 =
Q1Q3, subsequent to the fixation of import quota. This is the consumption
effect.
4. Redistributive Effect:
The fixation of import quota leads to a rise in the price of the given
commodity. It may result in a loss in consumer’s surplus for the importing
country. At the same time, higher price and increased production ensures a
gain in producer’s surplus. Thus, import quota causes redistributive effect
in the quota enforcing country. According to Fig. 2 after the fixation of
import quota, the price rises from P 0 to P 1 and the loss in consumer’s
surplus amounts to P 0EFP 1.
The gain is producer’s surplus amount s to P 0CGP 1. If importers are
organised, an amount equal to the revenue effect GHKF will accrue to
them. Consequ ently, the net loss to the community will be P 0EFP 1 –
(P0CGP 1 + GHKF) = ΔGCH + ΔFKE. If the revenue effect neither accrues
to the government nor to the importers, the redistribution effect will
involve a large net loss in welfare. In this case, the net loss in welfare will
amount to P 0EFP 1 – P0CGP 1 = GCEF. munotes.in
Page 59
Commercial Policy
59 5. Terms of Trade Effect:
The imposition of import quota can influence the terms of trade of a
country in a favourable or unfavourable way depending upon the elasticity
of the offer curve. If the offer curve of importing country is elastic, the
terms of trade will become favourable to it.
On the contrary, if the offer curve of exporting country is elastic, the terms
of trade are likely to become favourable for it and unfavourable for the
importing country.
The terms of trade effect of import quota can be explained t hrough Figure
3. Cloth is the exportable commodity and steel is the importable
commodity of the quota -imposing home country A. OA is the offer curve
of country A and OB is the offer curve of foreign country B.
Figure 4.3: Terms of trade effect of quota
Originally P is the point of exchange and the terms of trade are measured
by the slope of the line OP. If the county A imposes an import quota OS
upon the importable commodity steel, the exchange can take place either
at P 1 or P 2. If P 1 is the point of exch ange, the terms of trade are measured
by the slope of the line OR. Since OR is steeper than OP, the terms of
trade become favourable to the home country A.
On the opposite, if exchange takes place at P 2, the terms of trade are
measured by the line OR 1 whic h is less steep than OP. In this case, the
terms of trade become unfavourable to the quota -imposing country A. It
shows that the terms of trade may be uncertain or indeterminate
consequent upon the enforcement of a specified quota upon imports.
4.5.4 Types of Non tariff barriers
1. Voluntary export restraints (VERs) : A Voluntary export restraint
(VER)is an agreement by an exporter country’s government with an
importing country to limit their exports to it. It is activated by the
importing country in order to protect its domestic industries. The limit munotes.in
Page 60
International Economics
60 to imports is set in terms of quantity, value or market share. VERs are
rarely voluntary, they are accepted by exporters in order to continue to
gain access to the market of the importing countries. An example of
VERs is the voluntary restraint on Japanese automobile exports to US
negotiated in 1981.
2. Countervailing Duty ( CD): CD is an import duty imposed on the
imported products when such products are imported . It is an attempt to
ensure fair and market -oriented pricing of imported products and
thereby protecting domestic industries and firms. Certain foreign
countries enjoy benefits like export subsidies and export concessions in
the country of their origin. It is an attempt to ensure fair and market -
oriented pricing of imported products and thereby protecting domestic
industries and firms. The objective of CD is to eliminate the low -cost
advantage that is enjoyed by the imported product. The CD helps to
provide a level playing field for the domestic product.
3. Antidumping duties: To stop dumping of cheap products, importing
countries imposes tariffs on the product. This leads to increase in the
price of the imported product. This non tariff barrier is an important
measure taken to protect domestic producers agains t cheap imports
coming from other countries.
4. Technical, Administrative, and other regulations : International trade
is restricted by numerous technical, administrative, and other
regulations. These include safety regulations, health regulations for
food p roducts, labelling requirements showing origin and contents.
These types of barriers are usually imposed by developed countries
against imports from developing countries.
5. Preferential government procurement policy : Under this policy,
government gives pri ority to local producers in their procurement
policy. The ministries are forbidden to purchase imported products and
are directed to give preference to domestically produced goods.
6. Local content requirement : The government may discourage the
import of raw material by making it compulsory for domestic producers
to buy raw material from the domestic market. The proportion is
expressed either in terms of physical quantity of raw material or in
terms of value of the raw materials
7. Export subsidy : Export subsi dies are direct payment or the granting of
tax relief and subsidized loans to a country’s exporters. It is given in
order to reduce the price per unit of goods exported abroad. It enables
the firm to sell a larger quantity of its goods at a lower price in the
export market than in the home market. Export subsidies may be direct
or indirect. Though direct export subsidies are prohibited under GATs
agreement, countries use indirect export subsidies for export
promotion. These include subsidized credit, proper ty allocation of scare
raw material or foreign exchange , tax concession. Etc. munotes.in
Page 61
Commercial Policy
61 4.6 SUMMARY
In this module, we have studied the concept of commercial policy and its
objectives. There are two types of commercial policy; Free trade and
Protection. Under fre e trade, trade takes place between countries without
any trade barriers. Free trade has advantages like efficient allocation of
resources, specialization and international co -operation. Under protection
policy, countries use trade barriers like tariff , im port quotas to restrict
imports and protect domestic industries. Protection is advocated on the
basis of Infant industry argument, diversification of industries and
employment protection. Countries use tariff for restricting imports Tariffs
are used by cou nties to reduce imports and increase domestic production.
Quotas on the other hand limit the physical quantity of goods imported in
the country. It is an example of non tariff barrier. Countries also use other
non tariff barriers like Voluntary export res traints, antidumping duties and
technical, administrative, and other regulations to protect domestic market.
4.7 QUESTIONS
1) What is commercial trade policy? What are its main objectives?
2) Discuss the arguments in favour of free trade policy
3) Discuss the argu ments against free trade policy.
4) Discuss the arguments in favour of protection policy
5) Discuss the arguments against protectionism policy.
6) Discuss the types of tariff.
7) Explain the economic effects of tariffs.
8) What are quotas. Describe the types of quotas.
9) Explain the economic effects of quotas.
10) Describe any two types of non -tariff barriers
munotes.in
Page 62
62
5
ECONOMICS OF INTEGRATION
Unit Structure:
5.0 Objectives
5.1 Economic Integration Meaning, Types and Objectives
5.2 European Union
5.3 Brexit
5.4 ASEAN
5.5 Summary
5.6 Questions
5.0 OBJECTIVES
1) To study the meaning , objectives and type s of economic integration.
2) To understand the aim and achievements of European Union
3) To understand the reasons for BREXIT
4) To explore the role of ASEAN
5.1 ECONOMIC INTEGRATION: MEANING,
OBJECTIVES AND TYPES
5.1.1 Meaning of Economic Integration
The modern economic system is based upon such techniques that can be
employed economically only if the production takes place on a very large
scale. This requires expanding markets on the one hand and increasing
purchasing power with the people on the other.
For eff ective utilization of the modern techniques, certain countries having
small internal markets, have attempted to organise themselves into
regional groupings. The economic integration, in the broadest sense,
means the unification of distinct economies into a single larger economy.
The economic integration, according to Salvatore, is the “commercial
policy of discriminatively reducing or eliminating trade barriers only
among the nations joining together.”
Thus, the economic integration refers to an arrangement whereby two or
more countries combine into a larger economic region through the munotes.in
Page 63
Economic s of Integration
63 removal of discontinuities and discriminations existing along national
frontiers, while following a common tariff and trade policies against the
countries outside the group.
Tinbergen has defined economic integration as “the creation of the most
desirable structure of international economy, removing artificial
hindrances to the optimum operation and introducing deliberately all
desirable elements of co -ordination and unificatio n.” Tinbergen has
distinguished -between the negative and positive aspects of integration.
The negative aspects of integration involve the removal of discrimination
and restrictions on the movement of goods among the member countries.
The positive aspects o f integration involve the adoption of such policy
measures and institutional arrangements as facilitate the removal of
market distortions within the given economic region.
The economic integration can be understood both as a process and as a
state of affai rs. As a process, it is concerned with the measures which aim
at abolition of discrimination between economic units belonging to
different nation states. As a state of affairs, it can be treated as an area
comprised of different nation states among which t here is an absence of
various forms of discrimination.
There are two essential features of economic integration:
(i) Introduction of free trade among the member nations.
(ii) Imposition of a common external tariff policy against the non -member
countries.
From these two features, it follows that economic integration is a synthesis
between free trade and tariff protection.
5.1.2 Objectives of Economic Integration
The economic integration between two or more countries brings the
following main benefits:
(i) Economies of Scale:
The individual countries, having small internal market, have limited
capacity to expand production. The economic integration provides an
unrestricted access of the products produced by any member country. This
gives strong incentive to e xpand production and exploit fully advantages
of economies of scale.
(ii) International Specialisation:
The economic integration enables the member countries to attain a greater
degree of specialisation in both products and processes. Specialisation
based on comparative cost advantage by member countries can cause
considerably large expansion in production.
munotes.in
Page 64
Interna tional Economics
64 (iii) Qualitative Improvement in Output:
The regional economic co -operation among a number of countries leads to
rapid technological changes and larger and easier capital movements. The
member countries, in such favourable conditions, can bring about
qualitative improvement in production. There is also investment in
infrastructure to facilitate trade among member nations.
(iv) Expansion of Employment:
As some countries organise themselves into regional economic groups and
allow unrestricted flow of labour within the region, there can be
maximisation of employment and income. This increases the welfare of
the people.
(v) Improvement in Terms of Trade:
The economic integration improves the bargaining power of the member
countries vis -a-vis the rest of the world. That brings about a significant
improvement in their terms of trade.
(vi) Increase in Economic Efficiency:
The economic integration results in inc reased competition within the
region. That helps in maintaining a higher level of economic efficiency of
the group as a whole. This leads to better utilization of resources for the
participating countries.
(vii) Improvement in Living Standard:
As some cou ntries organise themselves into regional groups, there is
easier availability of superior varieties of goods at competitive prices. The
increase in employment opportunities and the purchasing power too
contributes in improving the living standards of the p eople.
(viii) Increase in Factor Mobility:
The economic integration leads to dismantling of barriers upon the
movement of labour and other factors among the member countries.
Increased factor mobility enlarges employment; lowers factor costs; and
promotes productive activity in all the member countries.
(ix) Political cooperation :
Economic co -operation lays the foundation for better political relations
between the member countries and such relations can be used to resolve
conflicts in the region.
3.1.3 Typ es of Economic Integration
The economic integration areof the following main types:
1) Preferential Trade Area:
The preferential trade area or association is the most -loose form of
economic integration. In this arrangement, the member countries lower
tariffs on imports from each other. In other words, the member countries
gives preferential treatment to each other. munotes.in
Page 65
Economic s of Integration
65 For non -member countries, they continue to maintain their individual
tariffs. The best example of preferential trade area is the Commonwealth
System of Preferences, established in 1932. It is headed by Britain and
includes all the Commonwealth countries.
2) Free Trade Area:
In this form of economic integration, the member countries eliminate
completely both tariff and other trade restrictions among th emselves.
However, each member country is free to maintain its own trade barriers
against the non - member countries. An important example of free trade
area is the European Free Trade Association (EFTA).
This association was formed in November, 1959. It in cluded countries
such as United Kingdom, Austria, Denmark, Norway, Sweden, Portugal,
Switzerland and Finland as associate members. Another such association
is Latin American Free Trade Association (LAFTA). It was formed in
June 1961 by 10 Latin American co untries.
3) Customs Union:
A more formal type of integration among two or more countries is the
customs union. In this form of integration, the member countries abolish
all tariffs and other trade barriers among themselves. They also adopt a
common external t ariff and commercial policy.
The customs unions and free trade area are similar in respect of abolition
of all trade barriers for the member countries. But the customs union is
distinct from the free trade area in respect of the common external tariff
against the non -member countries.
In case of free trade area, the member countries retain their own tariff and
other trade barriers against the non -member countries. Thus, customs
union is a more closely - knit form of integration than the free trade area.
In a customs union, all the member countries act as a single economic unit
against the non -member countries. The example of a customs union is the
European Economic Community formed by West Germany, France, Italy,
Belgium, the Netherlands, and Luxembourg in 19 57.
4) Common Market:
The common market means a more unified arrangement among a group of
countries than the customs union. The common market involves the
abolition of tariff and trade restrictions among the member countries and
adoption of a common external tariff. It further involves free movement of
labour and capital among the member nations.
Thus, in case of a common market, there is a free and integrated
movement of goods and factors among the member countries. The
European Common Market (ECM) called al so as the European Economic
Community (EEC) is the best example of the common market.
munotes.in
Page 66
Interna tional Economics
66 (v) Economic Union:
The most advanced form of economic integration involving the greatest
degree of co -operation is the economic union. In case of an economic
union, two or more countries form a common market. In addition, adopt a
common fiscal, monetary, exchange rate, industrial and other socio -
economic policies. The member countries try to create a common currency
and banking system.
An example of economic union is BEN ELUX (including Belgium,
Netherlands, and Luxembourg) which was formed in 1948 initially as a
customs union but later got converted into an economic union in 1960.
These countries have now joined the EU. The European Economic
Community (EEC) has transforme d itself into an economic union called as
European Union (EU) in 1991.
5.2 EUROPEAN UNION
The History of the EU
The concept of a European trade area was first established in 1950. The
European Coal and Steel Community (ECSC) had six founding
members: Belg ium, France, Germany, Italy, Luxembourg, and the
Netherlands.
The Treaty of Rome established a common market in 1957. It eliminated
customs duties in 1968 and put in place standard policies, particularly in
trade and agriculture. The ECSC added Denmark, Ir eland, and the United
Kingdom in 1973. It created its first Parliament in 1979. Greece joined in
1981, followed by Spain and Portugal in 1986.
The Treaty of Maastricht established the European Union common market
in 1993. The EU added Austria, Sweden, and Finland two years later.
Twelve more countries joined in 2004: Cyprus, Czech Republic, Estonia,
Hungary, Latvia, Lithuania, Malta, Poland, Slovakia, and Slovenia.
Bulgaria and Romania joined in 2007.
The Treaty of Lisbon increased the powers of the Europe an Parliament in
2009. It gave the EU the legal authority to negotiate and sign international
treaties. It increased EU powers, border control, immigration, judicial
cooperation in civil and criminal matters, and police cooperation.
19 member states joined a monetary union known as the eurozone , which
uses the euro as a single currency. The currency union represents
342 million EU ci tizens. The euro is the second largest reserve currency as
well as the second most traded currency in the world after the United
States dollar .
munotes.in
Page 67
Economic s of Integration
67 The aims of the European Union within its borders are:
promote peace, its values, and the well -being of its citizens
offer freedom, security, and justice without internal borders, while also
taking appropriate measure s at its external borders to regulate asylum
and immigration and prevent and combat crime
establish an internal market
achieve sustainable development based on balanced economic growth
and price stability and a highly competitive market economy with full
employment and social progress
protect and improve the quality of the environment
promote scientific and technological progress
combat social exclusion and discrimination
promote social justice and protection, equality between women and
men, and protection of the rights of the child
enhance economic, social, and territorial cohesion and solidarity among
EU countries
respect its rich cultural and linguistic diversity
establish an economic and monetary union whose currency is the euro
The aims of the EU within the wider world are:
uphold and promote its values and interests
contribute to peace and security and the sustainable development of the
Earth
contribute to solidarity and mutual respect among peoples, free and fair
trade, eradication of poverty and the p rotection of human rights
strict observance of international law
Achievements of EU
1. Peace and stability:
The EU has delivered over half a century of peace, stability, and
prosperity. It also plays an important role in diplomacy and works to
promote these s ame benefits – as well as democracy, fundamental
freedoms, and the rule of law – across the globe. In 2012, the EU was
awarded the Nobel Peace Prize for its achievements in this field.
2. Single market:
The EU's main economic engine is the single market. It e nables most
goods, services, money and people to move freely throughout most of the
continent. munotes.in
Page 68
Interna tional Economics
68 It has certainly become much easier to move around Europe – all EU
citizens have the right to study, work or retire in any EU country. As an
EU national, for emp loyment, social security and tax purposes, every EU
country is required to treat citizens other other member countries the same
as its own citizens.
Euro – used by over 340 million EU citizens, the euro has eliminated
the risk of currency fluctuation and e xchange costs, and strengthened
the single market – to the benefit of us all.
Telephone & digital services – Citizens can use your phone and online
services at no extra cost across the EU, thanks to the end of roaming
rules.
3. Citizens’ rights and protections:
The Treaty on the European Union gives EU citizens and legal residents a
wide range of rights, enacted in EU law across many fields.
4. Charter of fundamental righ ts:
The Charter brings together all the personal, civic, political, economic and
social rights enjoyed by people within the EU.
5. Employment rights :
Every EU worker enjoys certain minimum rights relating to health and
safety at work; equal opportunities; pro tection against all forms of
discrimination; and labour laws.
6. Digital rights :
The EU has taken a strong stance to protect individual rights and personal
information in its data protection and privacy laws, to ensure we all have
more control over our person al data.
7. Consumer rights :
EU consumers can feel safe in the knowledge that they will get their
money back if they return unwanted products and will receive a refund if
they experience any avoidable delays or cancellations while travelling.
And the standard s goods in EU shops must meet are among the world's
most stringent, in terms of both quality and safety.
8. Business, growth and trade:
The EU is the largest trade bloc in the world. It is the world's biggest
exporter of manufactured goods and services, and t he biggest import
market for over 100 countries.
Free trade among its members was one of the EU's founding principles.
This is possible thanks to the single market. Beyond its borders, the EU is
also committed to liberalising world trade. munotes.in
Page 69
Economic s of Integration
69 9. Business :
The EU has ensured that its citizens are protected against the downsides of
globalisation through EU support for small businesses and rules to make
sure big companies pay their fair share of tax. The EU can also help if
small business owners are treated unfairly.
10. Trade:
The EU has achieved a strong position by acting together with one voice
on the global stage, rather than with separate trade strategies.
The EU is in prime position when it comes to global trade. The openness
of our trade regime has meant that the EU is the biggest player on the
global trading scene and remains a reliable partner to do business with.
EU-Singapore free trade agreement: This agreement, signed in 2018,
makes it easier for EU firms to export more to Singapore, helps protect
people’s rights at work and the environment and opens Singapore’s
markets to EU companies for services and government contracts.
11. Food quality and environmental standards:
Because EU countries cooperate so closely, food and environment meet
some of the world’s highest quality standards.
12. Food :
Protecting health is the aim of all EU laws and standards in the farming
and food sectors. An extensive body of EU -wide law covers the entire
food production and processing chain within the EU, as well as imported
and e xported goods.
13. Environment :
The EU has developed some of the strictest environmental standards in the
world. EU policy seeks to minimise risks to the climate, health and
biodiversity. EU has already achieved Emissions targets.
14. International diploma cy & development:
EU countries acting in unison have much more of a voice on the world
stage than 27 nations of varying size acting separately. Taken together, the
EU institutions and national governments are the world’s leading donor of
development assist ance and work collectively to promote good
governance, fight hunger, and preserve natural resources.
15. Diplomacy & security :
Through its political, practical, and economic support, the EU has played a
crucial role in building peace in the Western Balkans since the Yugoslav
wars. One example is the EU-facilitated dialogue between Serbia and
Kosovo, which led to a landmark deal in April 2013 that is currently being
implemented, with EU support. munotes.in
Page 70
Interna tional Economics
70 16. Human rights :
The EU has developed human rights policy guid elines covering areas such
as the penalty, and freedom of expression, both on and offline. The
EU's Instrument for Democracy and Human Rights (EIDHR) provides
support to improve respect for human rights and fundamental freedoms in
countries and regions whe re they are most at risk.
17. Humanitarian aid :
The EU provides assistance to countries and populations, both within
Europe and abroad, when major disasters or humanitarian emergencies
strike. Collectively, the EU and its constituent countries are the worl d's
leading donor of humanitarian aid. Every year the EU provides food,
shelter, protection, healthcare and clean water to over 120 million victims
of disasters and conflict in over 80 countries.
5.3 BREXIT
What Is Brexit?
Brexit’ is the name given to the United Kingdom’s departure from the
European Union.
Referendum: Majority votes to leave
On 23 June 2016, the UK held a referendum on its membership of the EU.
The question facing voters was: ‘Should the United Kingdom remain a
member of the European Union or leave the European Union?’ 51.89% of
voters voted to leave the EU. The UK left the EU on 31 January 2020.
Timeline for BREXIT
The process of leaving the EU formally began on March 29, 2017, when
Britain Prime Minister Teresa May triggered Article 50 of the Lisbon
Treaty. The U.K. initially had two years from that date to negotiate a new
relationship with the EU. Following a snap election on June 8, 2017, May
remained the country's leader. However, the Conservatives lost their
outright majority in Parliam ent and agreed on a deal with the Euroskeptic
Democratic Unionist Party (DUP). This later caused May some difficulty
getting her Withdrawal Agreement passed in Parliament.Talks began on
June 19, 2017. Questions were raised around the process, in part becau se
Britain's constitution is unwritten and in part because no country has left
the EU using Article 50 before.
On Nov. 25, 2018, Britain and the EU agreed on a 599 -page Withdrawal
Agreement, a Brexit deal, touching upon issues like citizen's rights, the
divorce bill, and the Irish border. Parliament first voted on this agreement
on Jan. 15, 2019. Members of Parliament voted 432 -202 to reject the
agreement, the biggest defeat for a government in the House of Commons
in recent history. munotes.in
Page 71
Economic s of Integration
71 May stepped down as pa rty leader on June 7, 2019, after failing three
times to get the deal she negotiated with the EU approved by the House
of Commons. The following month, Boris Johnson, was elected prime
minister.
Johnson, a hardline Brexit supporter, campaigned on a platfor m to leave
the EU by the October deadline "do or die" and said he was prepared to
leave the EU without a deal. U.K. and EU negotiators agreed on a new
divorce deal on Oct. 17. The main difference from May's deal is that the
Irish backstop clause has been r eplaced with a new arrangement.
The U.K. was expected to leave the EU by Oct. 31, 2019, but the U.K.
Parliament voted to force the government to seek an extension to the
deadline and also delayed a vote on the new deal. Boris Johnson then
called for a gene ral election. In the Dec. 12 election, the third general
election in less than five years, Johnson's Conservative Party won a huge
majority of 364 seats in the House of Commons out of the 650 seats.
On Dec. 24, 2020, the U.K. and the EU struck a provision al free -trade
agreement that ensures the two sides can trade goods without tariffs or
quotas. However, key details of the future relationship remain uncertain,
such as trade in services, which make up 80% of the U.K. economy. This
prevented a “no -deal” Bre xit, which would have been significantly
damaging to the U.K. economy.
A provisional agreement was approved by the U.K. parliament on Jan. 1,
2021. It was approved by the European Parliament on April 28,
2021. While the deal, known as the Trade and Coopera tion Agreement
(TCA) allows tariff - and quota -free trade in goods, U.K. -EU trade still
faces customs checks, meaning commerce is not as smooth as when the
U.K. was a member of the EU.
Arguments For Brexit
Voters based their support for Brexit on a variety of factors, including
the European debt crisis, immigration, terrorism, and the perceived drag
of Brussels' bureaucracy on the U.K. economy. Britain has long been
wary of the European Union's projects, which voters feel threatens the
U.K.'s sovereignty: th e country never opted into the European Union's
monetary union, meaning that it uses the pound instead of the euro. It also
remained outside the Schengen Area, meaning that it does not share open
borders with a number of other European nations.
Although su pporters of Brexit have tended to stress issues of national
pride, safety, and sovereignty, they also muster economic arguments. For
example, Boris Johnson, , said on the eve of the vote, "EU politicians
would be banging down the door for a trade deal" the day after the vote,
in light of their "commercial interests."30 Labor Leave, the pro -
Brexit Labour group, co -authored a report with a group of economists in
Sept. 2017 that forecasted a 7% boost to annual GDP, with the largest
gains going to the lowest ea rners. munotes.in
Page 72
Interna tional Economics
72 5.4 ASSOCIATION OF SOUTHEAST ASIAN NATIONS
(ASEAN)
The Association of Southeast Asian Nations (ASEAN) is a regional group
of 10 Southeast Asian nations that promotes economic, political and
security cooperation among its members. Its members include Brunei,
Cambodia, Indonesia, Laos, Malaysia, Myanmar, the Philippines,
Singapore, Thailand and Vietnam. In 2020, the estimated total GDP of all
ASEAN states amounted to approximately 3.08 trillion U.S. dollars.
History: The ASEAN was established on 8th August 1967 in Bangkok,
Thailand with the signing of the ASEAN Declaration by the founding
members, Indonesia, the Philippines, Singapore and Thailand. Later, the
other members joined the regional group.
Aims of ASEAN
To accelerate the economic growth, social progress and cultural
development in the region through joint endeavours in the spirit of
equality and partnership in order to strengthen the foundation for a
prosperous and peaceful community of Southeast Asian Nations.
To promote regional peace and stability through abiding respect for
justice and the rule of law in the relationship among countries of the
region
To promote active collaboration and mutual assistance on matters of
common interest in the economic, social, cultural, technical,
scientific, and administrative fields.
To provide assistance to each other in the form of training and
research facilities in the educational, professional, technical and
administrative spheres.
To collaborate more effectively to encourage further growth in the
agric ulture and industry, and trade sectors.
To promote Southeast Asian studies; and
To maintain close and beneficial cooperation with existing
international and regional organisations with similar aims and
purposes and explore all avenues for even closer coop eration among
themselves.
5.5 ASEAN CHARTER
The ASEAN Charter serves as a firm foundation in achieving the ASEAN
Community by providing legal status and institutional framework for
ASEAN. It also codifies ASEAN norms, rules, and values; sets clear
targets for ASEAN; and presents accountability and compliance.
The ASEAN Charter entered into force on 15 December 2008. A
gathering of the ASEAN Foreign Ministers was held at the ASEAN
Secretariat in Jakarta to mark this very historic occasion for ASEAN.
munotes.in
Page 73
Economic s of Integration
73 With th e entry into force of the ASEAN Charter, ASEAN will hence forth
operate under a new legal framework and establish a number of new
organs to boost its community - building process. In effect, the ASEAN
Charter has become a legally binding agreement among the 10 ASEAN
Member States.
The importance of the ASEAN Charter can be seen in the following
contexts:
New political commitment at the top level
New and enhanced commitments
New legal framework, legal personality
New ASEAN bodies
Two new openly -recruited DSGs
More ASEAN meetings
More roles of ASEAN Foreign Ministers
New and enhanced role of the SecretaryGeneral of ASEAN
Other new initiatives and changes
ASEAN Political Security Community:
To build on what has been constructed over the years in the field of
political and security cooperation, the ASEAN Leaders agreed to
establish the ASEAN Political -Security Community (APSC). The APSC
aims to ensure that countries in the region live at peace with one another
and with the world in a just, democratic and harmoniou s environment.
The members of the Community pledge to rely exclusively on peaceful
processes in the settlement of intra -regional differences and regard their
security as fundamentally linked to one another and bound by geographic
location, common vision an d objectives. It has the following
components: political development; shaping and sharing of norms;
conflict prevention; conflict resolution; post -conflict peace building; and
implementing mechanisms.
The APSC Blueprint envisages ASEAN to be a rules -based Community
of shared values and norms; a cohesive, peaceful, stable and resilient
region with shared responsibility for comprehensive security; as well as a
dynamic and outward -looking region in an increasingly integrated and
interdependent world.
The APSC Blueprint is guided by the ASEAN Charter and the principles
and purposes contained therein. It provides a roadmap and timetable to
establish the APSC by 2015. It also leaves room for flexibility to
continue programmes/activities beyond 2015 in order to ret ain its
significance and have an enduring quality. munotes.in
Page 74
Interna tional Economics
74 Economic Community :
The AEC is the realization of the region’s end goal of economic
integration. It envisions ASEAN as a single market and product base, a
highly competitive region, with equitable economic development, and
fully integrated into the global economy.
The history of AEC can be traced back as far as 1992 when the ASEAN
Leaders mandated the creation of the ASEAN Free Trade Area (AFTA).
Since then, efforts were intensified to broaden the region’s economic
potentials. The adoption of ASEAN Vision 2020 by the Leaders in 1997
has further envisaged ASEAN as a highly competitive region with free
flow of goods, services, investments, a freer flow of capital, equitable
economic development and reduced poverty and socio -economic
disparities.
In 1998, the Leaders adopte d the Hanoi Plan of Action (HPA). It
chartered out a set of initiatives for economic integration to realize the
ASEAN Vision 2020. Recognizing the need for an integrated region, the
Leaders issued the Declaration of ASEAN Concord II in 2003 which set
out the establishment of ASEAN Community (initially targeted by 2020
but was later accelerated to 2015). The Declaration of ASEAN Concord
II comprise of three pillars including the AEC.
The AEC Blueprint 2015 was adopted in 2007 as a coherent master plan
guidi ng the establishment of the AEC in 2015. Immediately after that, a
new AEC Blueprint 2025 was developed to set the strategic directions
for the next phase of ASEAN’s economic integration agenda. The AEC
Blueprint 2025 is envisaged to further deepen economi c integration and
achieve a more integrated economic community with the following
characteristics:
A Highly Integrated and Cohesive Economy
A Competitive, Innovative and Dynamic ASEAN
Enhanced Connectivity and Sectoral Cooperation
A Resilient, Inclusive, People Oriented and People -Centered ASEAN,
and A Global ASEAN
These characteristics support the vision for the AEC under the ASEAN
Community Vision 2025.
ASEAN Socio Cultural Community:
The ASEAN Socio Cultural Community is all about realizing the full
potential of ASEAN citizens. The ASCC Blueprint 2025 was adopted by
the ASEAN Leaders at the 27th ASEAN Summit on 22 November 2015
in Kuala Lumpur, Malaysia.
ACSS is working towards:
A committed, participative, and socially responsible community for
the benefit of ASEAN people munotes.in
Page 75
Economic s of Integration
75 An inclusive community that promotes high quality of life, equitable
access to opportunities for all, and promotes and protects human
rights.
A sustainable community that promotes social development and
environmental protection
A resilient community with enhanced capacity and capability to adapt
and respond to social and economic vulnerabilities, disasters, climate
change, and other new challenges, and
A dynamic and harmonious community that is aware and proud of its
identity, culture and heritage.
To achieve this, Member States are cooperating on a wide range of areas,
including: Culture and Arts, Information and Media , Education , Youth ,
Sports , Social Welfare and Development , Gender, Rights of Women and
Children , Rural Development and Poverty Eradication , Labour , Civil
Service , Environment , Haze , Disaster Managemen t and Humanitarian
Assistance and Health.
Many of these issues, such as human capital development, social
protection, pandemic response, humanitarian assistance, green jobs and
circular economy, are cross -sectoral in nature. To manage both the
cohesivene ss of the pillar and also cross -sectoral issues, two platforms
have been developed : (1) the ASCC Counciland (2) the Coordinating
Conference on the ASCC (SOC -COM).
ASEAN and India :
India became ASEAN Dialogue Partner in 1996. Preliminary ASEAN
data showed that two-way merchandise trade between ASEAN and India
reached USD 77.0 billion in 2019, while total FDI inflows from India
amounted to USD 2.0 billion. This placed India as ASEAN’s sixth
largest trading partner and eight largest source of FDI among ASEAN
Dialogue Partners. At the 2nd ASEAN -India Summit in 2003, the
Leaders signed the ASEAN -India Framework Agreement on
Comprehensive Economic Cooperation. The Framework Agreement laid
a sound basis for the establishment of an ASEAN -India Free Trade Area
(FTA ), which includes FTA in goods, services and investment.
The ASEAN -India Trade in Goods Agreement (AITIGA) entered into
force on 1 January 2010. The signing of the AITIGA on 13 August 2009
in Bangkok paved the way for the creation of one of the world’s largest
free trade areas with more than 1.9 billion people and a combined GDP
of US$ 5.36 trillion. The ASEAN -India Trade in Services Agreement
was signed by all Parties on 13 November 2014 and had entered into
force on 1 July 2015. The ASEAN -India Investmen t Agreement was
signed by all Parties on 12 November 2014. munotes.in
Page 76
Interna tional Economics
76 Priority Areas of Cooperation
Under the Framework Agreement, ASEAN and India prioritise the
following areas:
Trade Facilitation:
1. Mutual Recognition Arrangements, conformity assessment,
accreditati on procedures, and standards and technical regulations;
2. non-tariff measures.
3. customs cooperation
4. trade financing; and
5. business visa and travel facilitation.
Sectors of Cooperation:
1. agriculture, fisheries, and forestry;
2. services: media and entertainment, health, financial, tourism,
construction, business process outsourcing, environmental;
3. mining and energy: oil and natural gas, power generation and
supply;
4. science and technology: information and communications
technology, electronic commerce, biotechnology;
5. transport and infrastructure: transport and communication;
6. manufacturing: automotive, drugs and pharmaceuticals, textiles,
petrochemicals, garments, food processing, leather goods, light
engineering goods, gems and jewellery processing;
7. human resource development: capacity building, education,
technology transfer; and others: handicrafts, small and medium
enterprises, competition policy, Mekong Basin Development,
intellectual property rights, government procurement.
Trade and Investment Promotion:
1. fairs and exhibitions;
2. ASEAN -India weblinks; and
3. business sector dialogues.
5.5 SUMMARY
In this module, we studied the meaning of the term economic integration.
It is a process by which counties combine economically to create a larger
economy. The objectives for economic integration is to create larger
market through international specialization, Larger output, mobility of munotes.in
Page 77
Economic s of Integration
77 labor. Economic integration takes various forms. Under preferential trade
agreement, member countries lower tariffs on imports from each other .
Under free trade, member countries eliminate completely both tariff and
other trade restrictions among themselves. Under custom union, the
member countries abolish all tariffs and other trade barriers among
themselves. The common market involves the abol ition of tariff and trade
restrictions among the member countries and adoption of a common
external tariff. Economic Union is where countries create single economic
unit. European Union is an example of economic union. The Treaty of
Maastricht established the European Union common market in 1993.The
EU's main economic engine is the single market. It enables most goods,
services, money, and people to move freely throughout most of the
continent. In 2016, Great Britain voted to leave the European Union. This
is known as BREXIT. ASEAN is an integration of 10 south Asian
countries. It has been created with the aim to accelerate the economic
growth, social progress and cultural development in the region.
5.6 QUESTIONS
1) What is meant by international economic inte gration? Discuss the
types of international economic integration.
2) Discuss the objectives of international economic integration.
3) Discuss the advantages of international economic integration.
4) Discuss the various aspects of the Brexit
5) What are the causes of Brexit?
6) What are the objectives of forming European Union?
7) What are the achievements of European Union?
8) Discuss the fundamental principles and vision of ASEAN .
9) Discuss the aims of ASEAN
munotes.in
Page 78
78 Module 3
6
BALANCE OF PAYMENTS AND
INTERNATIONAL ECONOMIC
ORGANIZATION
Unit Structure:
6.0 Objectives
6.1 Meaning and structure of Balance of Payments
6.2 Types of disequilibrium
6.3 Causes of disequilibrium
6.4 Summary
6.5 Questions
6.0 OBJE CTIVES
1) To understand the meaning and structure of Balance of Payment
2) To study the types of disequilibrium in Balance of Payment
3) To analyse the causes of disequilibrium in Balance of Payment
6.1 MEANING AND STRUCTURE OF BOP
6.1.1 Meaning of Balance of Payme nts (BOP):
The balance of payments (BOP) of a country is a systematic record of
alleconomic transactions between the residents of a country and therest of
the world. The balance of payments is a consolidated account of the
receipts and pay ments from and t o other countries arising out of all
economic transactions during the year.
In the words of C. B. Kindleberger; “The balance of payments of a
country is a sys tematic record of all economic transactions between the
residents of the reporting and the reside nts of the foreign countries during
a given period of time.”
The International Monetary Fund defines BOP as a “statistical statement
that subsequently summarises, for a specific time period, the economic
transactions of an economy with the rest of the worl d.”
munotes.in
Page 79
Balance of Payments
and International
Economic Organization
79 Features of Balance of Payment Account :
(i) It is a systematic record of all economic transactions between
residents of one country and rest of the world.
(ii) It includes all transactions in goods (visible items), services (invisible)
and capital during a per iod of time.
(iii) It is constructed on double entry system of accounting. Thus, every
international transaction will result in credit entry and debit entry of
equal size.
(iv) All economic transactions that are carried out with the rest of world
are either credited or debited.
(v) In accounting sense total debit will always be equal to total credits,
i.e., balance of payments will always be in equilibrium. But in
economic sense, if receipts are larger than payments, there is surplus
in BOP. Similarly, if payments are lar ger than receipts, there is deficit
in BOP.
6.1.2 Structure of BOP Accounts:
According to the broad nature of the transac tions concerned, the BOP of a
country is di vided into four parts: (i) the current ac count, (ii) the capital
account, ( iii) errors an d omissions and (iv) official reserve account.
Structure of Balance of Payment
1. Current Account
a) Balance of Trade Export of Goods
Import of Goods
b) Invisible Trade Export of services
Import of services
c) Other Flows Investment Income
Unilater al Transfers
2. Capital Account Long Term Capital Transaction
Short Term Capital Transaction
3. Errors and Omissions
4. Official Reserve Account
1.The Current account:
The current ac count of BOP includes all transaction arising from trade in
goods and services, from income accruing to capital by one country and
invested in another and from unilateral transfers, both private and official.
The current account is divided in three parts: munotes.in
Page 80
International Economics
80 a) The first of these is called Balance of trade or visible account or
merchandise account. This account records imports and exports of
physical goods. The balance of visible exports and visible imports is
called balance of visible trade or balance of merchan dise trade
b) The second part of the account is called the invisibl es account since it
records all exports and imports of services. The balance of these trans -
actions is called balance of invisible trade. It includes freights and fares
of ships and planes, insurance and bank ing charges, foreign tours and
education abroad , transactions out of interest and dividends on
foreigners’ investment, and so on.
c) Investment income consists of interest, profit and dividends on bonus
and credits. Unilateral Transfer include grants, gifts, pension, etc.
2. The Capital account :
The capi tal ac count shows transactions relating to the inter national
movement of ownership of financial assets. It refers to cross -border
movements in foreign assets like shares, property, or direct acquisitions of
companies’ bank loans, gov ernments securities, etc. In other words, capi -
tal account records export and import of capi tal from and to foreign
countries.
The capital account is divided into two main parts one is the short term
and another is the long-term movements of capi tal. A short -term capital is
one which matures in one year or less, such as bank accounts. A long-term
capital is one whose maturity period is longer than a year, such as long
term bonds or physical capital.
Long term capital account is, again of two categories: direct investment
and portfolio investment. Direct investment refers to ex penditure on fixed
capital formation, while portfolio investment refers to the acquisition of
financial assets like bonds, shares, etc.
3. Errors and omissions:
Since BOP always balances in theory, all debits must be offset by all
credits and vice versa. In practice, rarely it happens particularly because
statistics are in complete as well as imperfect. That is why errors and
omissions are considered so that BOP accounts are kept in balance.
4. The offic ial reserve account:
The total of 1,2 3 and 4 comprises the overall bal ance. The category of
official reserve account covers the net amount of transactions by gov -
ernment. This account covers purchases and sales of reserve assets (such
as gold, con vertib le foreign exchange and special draw ing rights) by the
central monetary authority.
munotes.in
Page 81
Balance of Payments
and International
Economic Organization
81 BOP can be summarized as:
Current account balance + Capital account balance + Reserve balance =
Balance of Pay ments
The equilibrium in BOP or Basic Balance : Overall, the BOP accounts
will always balance inaccounting sense. They must balance as any flows
of foreign exchange on payment sideshould match flow of foreign
exchange on receipt side. This is so because under double
entrybookkeeping system, the credit and debit transactions are equal to
each other.
Disequilibrium in BOP: Though the balance of payment always balances
in accounting sense, inreality, the BOP will be in disequilibrium due to
difference in current and capital account . A disequilibrium in the balance
of payment means a condition ofSurplus or deficit.
A Surplus in the BOP occurs when Total Receipts exceeds TotalPayments.
Thus, BOP= CREDIT>DEBIT.
A Deficit in the BOP occurs when Total Payments exceeds TotalReceipts.
Thus, BOP= CREDITAutonomous and A ccommodating Movement: There are two types of
transaction in Balance of payment. Autonomous and Accommodating.
Autonomous transaction s are those which takes place irrespective of the
transaction s in other items of the BOP. All transaction in the current
andcapital accounts are autonomous transaction s since they are
independent of other transaction inthe BOP and are influenced by income
and profit consideration. The transaction like exportand import of goods
and services, Foreign Direct Investment are includ ed in this.
Accommodating transaction on the other hand are dependent on other
transaction in BOP.They are undertaken to offset the deficit or surplus in
the capital or current account. Theytake place when disequilibrium occurs
in the autonomous transactio ns. The deficit or surplushas to be balanced
with the help of accommodating flow. They are in the form of loan
orforeign aid from foreign country. They are utilized to balance the deficit
or surplus in theBOP and maintain the overall equilibrium of BOP.
6.2 TYPES OF DISEQUILIBRIUM
Main types of disequilibrium in the balance of payments are:
i. Short -run Disequilibrium
ii. Long -run Disequilibrium
iii. Cyclical Disequilibrium
iv. Structural Disequilibrium
i. Short run Disequilibrium : It is a disequilibrium that prevails f or a
year or more. They occur due to a sudden change in demand for foreign
goods and services. Domestic problems like natural calamities of munotes.in
Page 82
International Economics
82 financial crisis may result in increase in imports or decline in exports.
Such imbalances are temporary in nature, a nd they can be corrected
through short term borrowings or other adjustments in the capital
account.
ii. Long -run Disequilibrium : The long -term disequilibrium thus refers
to a deep - rooted, persistent deficit or surplus in the balance of
payments of a country . It is secular disequilibrium emerging on account
of the chronologically accumulated short -term disequilibria — deficits
or surpluses. A long -term deficit in the balance of payments of a
country tends to deplete its foreign exchange reserves and the coun try
may also not be able to raise any more loans from foreigners during
such a period of persistent deficits. In short, true disequilibrium is a
long-term phenomenon. It is caused by persistent deep -rooted dynamic
changes which slowly take place in the eco nomy over a long period of
time. It is caused by changes in dynamic factors such as capital
formation, population growth, technological advancement, innovations,
etc.
A newly developing economy, for instance, in its initial stages of
growth needs huge inve stment exceeding its savings. In view of its low
capital formation, it has also to import a large amount of its capital
requirements from foreign countries and its imports thus tend to exceed
its exports. These become a chronic phenomenon. And in the absen ce
of a sufficient inflow of foreign capital in such countries, a secular
deficit balance of payments may result.
iii. Cyclical Disequilibrium: It occurs on account of trade cycles.
Depending upon the different phases of trade cycles like prosperity and
depress ion, demand and other forces vary, causing changes in the terms
of trade as well as growth of trade and accordingly a surplus or deficit
will result in the balance of payments. Cyclical disequilibrium in the
balance of payments may occur because:
a) Trade cyc les follow different paths and patterns in different countries.
There are no identical timings and periodicity of occurrence of cycles
in different countries.
b) Income elasticities of demand for imports in different countries are not
identical.
c) Price elastic ities of demand for imports differ in different countries.
In short, cyclical fluctuations cause disequilibrium in the balance of
payments because of cyclical changes in income, employment, output
and price variables. When prices rise during prosperity and fall during a
depression, a country which has a highly elastic demand for imports
experiences a decline in the value of imports and if it continues its
exports further, it will show a surplus in the balance of payments. Since
deficit and surplus alternati vely take place during the depression and
prosperity phase of a cycle, the balance of payments equilibrium is
automatically set forth over the complete cycle. munotes.in
Page 83
Balance of Payments
and International
Economic Organization
83 iv. Structural Disequilibrium: It emerges on account of structural
changes occurring in domestic econ omy or abroad which may alter the
demand or supply relations of exports or imports or both. Suppose the
foreign demand for India’s jute products declines because of some
substitutes, then the resources employed by India in the production of
jute goods will have to be shifted to some other commodities of export.
If this is not easily possible, India’s exports may decline whereas with
imports remaining the same, disequilibrium in the balance of payments
will arise. Similarly, if the supply condition of export items is changed,
i.e., supply is reduced due to crop failure in prime commodities or
shortage of raw materials or labour strikes, etc. in the case of
manufactured goods, then also exports may decline to that extent and
structural disequilibrium in the ba lance of payments will arise.
Moreover, a shift in demand occurs with the changes in tastes, fashions,
habits, income, economic progress, etc. Propensity to import may
change as a result. Demand for some imported goods may increase,
while that for certain goods may decline leading to a structural change.
6.3 CAUSES OF DISEQUILIBRIUM IN BALANCE OF
PAYMENT
Disequilibrium in the balance of payment is the result of imbalance
between receipts and payments in current and capital account of the BOP.
Disequilibr ium in a country’s balance of payments position may arise
either for a short period or for a long period. Any disequilibrium in the
balance of payments arises owing to a large number of causes or factors
operating simultaneously. Types of disequilibrium di ffer from country to
country, while the different kinds of disequilibrium and their causes in the
same country will differ at different times.
Following are the important causes fordisequilibrium in the balance of
payments of a country:
1. Trade Cycles: Cyclical fluctuations generally produce cyclical
disequilibrium. Recession or inflation in any of the developed countries
can have impact on the rest of the world. The cyclical fluctuations in
income, demand, production is transmitted from one country to an other.
This affects the export of the country causing deficit in the balance of
payment.
2. Huge Developmental and Investment Programmes: Huge
development and investment programmes in the developing economies are
the root causes of the disequilibrium in the balance of payments of these
countries. Their propensity to import goes on increasing for want of
capital for rapid industrialisation; while exports may not be boosted up to
that extent as these is the primary producing countries.
Moreover, their expor ts of primary commodities may decline as newly -
created domestic industries may require them. Thus, there will be
structural changes in the balance of payments and structural
disequilibrium will result. munotes.in
Page 84
International Economics
84 3. Changing Export Demand : Improvement in domestic pro duction of
essential food grains, raw materials, substitute goods, etc. in advanced
countries has reduced their need for import from the primary goods
producing underdeveloped countries. Thus, export demand has
considerably changed, resulting in structural disequilibrium in these
countries.
Similarly, advanced countries also suffer from fall in exports earnings as a
result of loss of their markets in developing countries owing to the
tendency of these nations for self -reliance and their ways and means of
curtailing their imports. But disequilibrium (deficit) in balance of
payments seems to be more persistent in the underdeveloped or
developing nations than in the advanced rich nations.
4. Population Growth: High population growth in underdeveloped
countries adversely affects their balance of payments position. It is easy to
see that an increase in population increases the needs of these countries for
imports of essential goods and decreases the capacity to export.
5. Huge External Borrowings: Another reason for a surplus or deficit in
the balance of payments arises out of international borrowing and
investment. A country may tend to have an adverse balance of payments
when it borrows heavily from another country, while the lending country
will tend to have a favourable balance and the receiving country will have
a deficit balance of payments.
6. Inflation: Owing to rapid economic development, the resulting income
and price effects will adversely affect the balance of payments position of
a developing country. With rising income, the marginal propensity to
import is high in these countries. This causes their demand for imported
goods to rise.
Since marginal propensity to consume is also high in these countries,
people’s demand for domestic goods also will ris e, and hence less may be
available for export. Moreover, a huge investment in heavy industries in
the developing countries may have an inflationary impact, as the output of
these industries will not be forthcoming immediately, whereas money
income will hav e been already expanded. Thus, there will be an excess of
monetary demand for goods and services in general which will push up the
price levels. A rise in the comparative price level certainly encourages
imports and discourages exports, resulting in a defi cit balance of
payments.
7. Demonstration Effect : Demonstration effect is another most important
factor causing deficit in the balance of payments of a country — especially
of an underdeveloped country. When people of underdeveloped nations
are influenced by advanced countries through economicor social relations,
there will be demonstration effect on the consumption pattern of these
people and they will desire to adopt western pattern of consumption so
that their propensity to import increases, whereas thei r export earnings
may remain the same or may even decline with the increase in income,
thus causing an adverse balance of payments for the country. munotes.in
Page 85
Balance of Payments
and International
Economic Organization
85 8. Reciprocal Demands: Since intensity of reciprocal demand for
products of different countries differs, te rms of trade of a country may be
set differently with different countries under multi -trade transactions
which may lead to disequilibrium in a way.
9. Globalization : In the recent years, Globalization has led to increase in
movement of goods and services a nd foreign investment. The competitive
environment created due to globalizationhas led to disequilibrium in
balance of payment of some countries.
6.4 SUMMARY
In this module, we have studied the structure of Balance of Payment. BOP
is a tabular representat ion of economic transaction with the rest of the
world. It consists of four parts: Current account, Capital account, errors
andomissions and official reserve account. The current account consists of
export and import of goods and services while capital ac count consists of
transactions in financial assets. BOP is based on double entry book
keeping system. Under this system, the debit and credit side should be
equal. In accounting sense, total debit will always be equal to total credits,
i.e., balance of pay ments will always be in equilibrium. But in economic
sense, if receipts are larger than payments, there is surplus in BOP.
Similarly, if payments are larger than receipts, there is deficit in BOP.
There are different types ofdisequilibrium caused by short term factors,
long term factors, cyclical factors and structural changes. Disequilibriumis
caused by various factors like population growth, inflation, trade cycles,
investment demand and globalization.
6.5 QUESTIONS
1) Explain the concept and structure of Balance of Payment.
2) Explain in detail the Current and Capital Account of the Balance of
Payment.
3) Explain the concept of autonomous and accommodating flows under
BOP.
4) Balance of payment always balances. Discuss.
5) Explain the causes of disequilibrium in Ba lance of Payment.
6) Discuss the different types of disequilibrium in BOP
munotes.in
Page 86
86 7
TRENDS IN WORLD TRADE AND WTO
Unit Structure:
7.0 Objectives
7.1 Measures to correct disequilibrium in Balance of Payment
7.2 Principles and functions of WTO
7.3 Study of TRIPs, TRIMs, and GATs agreement
7.4 Impact of WTO on the Indian Economy
7.5 Summary
7.6 Questions
7.0 OBJECTIVES
1) To analyse the measures to correct the disequilibrium in Balance of
Payment.
2) To study the principles and functions of WTO
3) To discuss the TRIPs, TRIMs and GATs agreement.
4) To analyse the impact of WTO on developing coun tries like India.
7.1 MEASURES TO CORRECT DISEQUILIBRIUM IN
BALANCE OF PAYMENT
1) Expenditure reducing polices :
The important way to reduce imports and thereby reduce deficit in balance
of payments is toadopt monetary and fiscal policies that try to redu ce
aggregate demand in theeconomy. The fall in aggregate demand in the
economy works toreduce imports and help in solving the balance of
payments problem.
The two important instruments of reducing aggregate demand are the use
of:
(1) Tight monetary policy and
(2) Concretionary fiscal policy.
Tight Monetary Policy:
Tight monetary is used to check aggregate demand by raising the cost
ofbank credit and restricting the availability of credit. For this bank rate is munotes.in
Page 87
Trends in World Trade
and WTO
87 raised by the CentralBank of the country which leads to higher lending
rates charged by the commercial banks. This discourages businessmen to
borrow for investment and consumers to borrow for buyingdurable
consumers goods. This therefore leads to the reduction in investment and
consumption expenditure . Besides, availability of credit to lend for
investment and consumption purposes is reduced by raisingthe cash
reserve ratio (CRR) of the banks and undertaking of open market
operations ( selling Government securities in the open market) by the
Central Ban k of the country. This also tends to lower aggregate demand
which will helps in reducing imports.
Contractionary Fiscal Policy :
Fiscal policy is also an important means of reducing aggregate demand.
Anincrease in direct taxes such as income tax will reduc e aggregate
demand. A part ofreduction in expenditure may lead to decrease in
imports. Increase in indirect taxes such asexcise duties and sales tax will
also cause reduction in demand. The other fiscal policy measure is to
reduce Government expenditure, e speciallyunproductive expenditure. The
cut in Government expenditure will notonly reduce expenditure directly
but also indirectly through the operation of multiplier. It may be noted that
if tight monetary and contractionary fiscal policies succeed in
lowingaggregate expenditure which causes reduction in prices or lowering
the rate of inflation, theywill work in two ways to improve the balance of
payments. First, fall in domestic prices will induce people to buy domestic
products rather than imported goods. Second, lower domestic prices will
stimulate exports. Fall in imports and rise in exports will help in reducing
deficit in balance of payments. However, it may be emphasized again that
the method of reducing expenditure through contractionary monetary and
fiscal policies is not without limitations. If reduction in aggregate demand
lowers investment, this will adversely affect economic growth. Thus,
correction in balance of payments may be achieved at the expense of
economic growth.
2) Expenditure – Switching Policies: Devaluation:
Another method which used for correcting disequilibrium inbalance of
payments is the use of expenditure -switching policies. Expenditure
switchingpolicies work through changes in relative prices or through
exchange rates. Prices of imports are increased by makingdomestically
produced goods relatively cheaper. Expenditure switching policies may
lowerthe prices of exports which will encourage exports of a country. In
this way by changingrelative prices, expenditure -switching policies h elp in
correcting disequilibrium in balance ofpayments. The important form of
expenditure switching policy is the reduction in foreign exchange rateof
the national currency, namely, devaluation. By devaluation we mean
reducing the value orexchange rate of a domestic currency with respect to
other foreign currencies. Devaluation takes place when a country is under
fixed exchange rate systemand occasionally decides to lower the exchange
rate of its currency to improve its balance of payments. On the other han d,
in the present flexible exchange rate system, its exchange rate as munotes.in
Page 88
International Economics
88 determined by demand for and supply of currencies. Fall in the value of a
currency with respect to foreign currencies as determined by demand and
supply conditions is described as deprec iation. As a result of reduction in
the exchange rate of a currency with respect to foreign currencies, the
prices of goods to be exported fall, whereas prices of imports go up. This
encouragesexports and discourages imports. With exports so stimulated
and imports discouraged, thedeficit in the balance of payments will tend to
be reduced.
Marshall Lerner Condition. According to the Marshall Lerner condition,
that whether devaluation ordepreciation will lead to the rise in export
earnings and reduction in im port expendituredepends on the price
elasticity of foreign demand for exports and domestic demand forimports.
Marshall and Lerner condition states that devaluation will succeed
inimproving the balance of payments if sum of price elasticity of exports
and p rice elasticity ofimports is greater than one. Thus, according to
Marshall -Lerner Condition, devaluationimproves balance of payments if
e x + e m >1
where
e x stands for price elasticity of exports
e m stands for price elasticity of imports
If in case of a country e x + e m <1, the devaluation will adversely affect
balance of paymentsposition instead of improving it. If e x + e m = 1,
devaluation will leave the disequilibrium in the balance of payments
unchanged.
3) Direct Measures: The countries may also adopt direct measures which
will help to restrict imports or promote exports to bring equilibrium in the
Balance of payment.
a) Tariffs : Tariffs are duties (taxes) imposed on imports. When tariffs are
imposed, the prices of imports would increase to the extent of tariff.
The increased prices will reduce the demand for imported goods and at
the same time induce domestic producers to produce more of import
substitutes.
b) Quotas : Under the quota system, the government may fix and permit
the maximumquantity o r value of a commodity to be imported during a
given period. By restricting importthrough the quota system, the deficit
is reduced and the balance of payments position isimproved.
c) Export promotion: Exports may be encouraged by reducing export
duties and l owering the interest rate on credit used for financing
exports. Exports are also encouraged by granting subsidies to
manufacturers and exporters. Besides, on export earnings lower income
tax can be levied to provide incentives to the exporters to produce a nd
export more goods and services. By imposing lower excise duties,
prices of exports can be reduced to make them competitive in the world
markets. munotes.in
Page 89
Trends in World Trade
and WTO
89 d) Exchange Control : Under it, all the exporters are ordered to surrender
their foreign exchange to the central bankof a country, and it is then
rationed out among the licensed importers. No one else is allowed
toimport goods without a license. The balance of payments is thus
rectified by keeping theimports within limits
7.2 PRINCIPLES AND FUNCTIONS OF WTO
7.2.1 I ntroduction
The World Trade Organization (WTO ) is an intergovernmental
organization that regulates and facilitates international trade. Governments
use the organization to establish, revise, and enforce the rules that govern
international trade. It officia lly commenced operations on 1 January 1995,
thus replacing the General Agreement on Tariffs and Trade (GATT) that
had been established in 1948. The WTO is the world's largest international
economic organization, with 164 member states representing over 98% of
global trade and global GDP.
The WTO facilitates trade in goods, services and intellectual property
among participating countries by providing a framework for negotiating
trade agreements, which usually aim to reduce or eliminate tariffs, quotas,
and other restrictions; these agreements are signed by representatives of
member governments and ratified by their legislatures. The WTO also
administers independent dispute resolution for enforcing participants'
adherence to trade agreements and resolving tr ade-related disputes The
organization prohibits discrimination between trading partners, but
provides exceptions for environmental protection, national security, and
other important goals.
7.2.2 Principles of WTO
WTO has a framework of policies binding to all member nations. The
trading principles aim to encourage free movement of goods and services
among member nations. The principle of WTO are as follows.
1) Non-discrimination : It has two major components: the most favoured
nation (MFN) rule and the nationa l treatment policy. Both are
embedded in the main WTO rules on goods, services, and intellectual
property, but their precise scope and nature differ across these areas.
2) Most Favoured Nation: All member nations are granted the status of
most favoured natio n. This implies that all member nations are treated
equally. Any trade concession given to one member country has to be
given to the others. MFN ensures equal treatment for products offered
among WTO members.
3) National Treatment: It forbids discrimination between the member’s
own nationals and the national of other members. The foreign products
should be given same treatment as the identical domestic products.
munotes.in
Page 90
International Economics
90 4) Freer trade : WTO aims towards trade liberalization by removing trade
barriers. The WTO aims at free trade by lowering or removing tariff
rates and custom duties. The idea is to open markets through
progressive liberalization.
5) Promoting fair competition : WTO principles aims to promote
competition in a global market. WTO has allowed reduction in the
tariff, but member countries have rights to lay countervailing duties on
imports that have been subsidized.
6) Prediction through binding and transparency : WTO members are
required to bind their commitments to the trading process. This gives
market a clear picture of future opportunities which encourages
investment, trade and brings more stability , transparency and
predictability.
7) Encouraging social development and economic reforms : WTO
Principles are structured in a manner that supports developing countri es
in their social and economic reforms through special assistance and
flexibility in time to implement WTO agreements. The aim is to bring
developing nations at par with the global trading market.
7.2.3 Functions of WTO
1) Facilitating implementation of a greement: WTO facilitates the
implementation, administration, and operation of the multilateral trade
agreement. It provides framework for implementation and
administration of Plurilateral Trade agreements.
2) Forum for negotiation : The WTO provides opportu nities to members
to negotiate and have trade arrangements among themselves.
3) Settlement of disputes : The member countries may enterinto trade
disputes on various issues.WTO administers the understanding on
Rules and Procedures governing the settlement of disputes.
4) Trade policy review mechanism : WTO administers the Trade policy
review mechanism.WTO Provides framework for the conduct of trade
relation among member nations.
5) WTO co -operation with other institutions : In order to enable
coherence economic pol icymaking, WTO co -operates with other
institutions like IMF and the World Bank. This enablescoherent and
meaningful policies.
munotes.in
Page 91
Trends in World Trade
and WTO
91 7.3 STUDY OF TRIPS, TRIMS AND GATS AGREEMENT
7.3.1 The agreement on Trade related aspects of Intellectual property
rights (TRIPs)
The TRIPS Agreement makes protection of intellectual property rights an
integral part of the multilateral trading system, as embodied in the WTO.
The agreement is often termed one of the three “pillars” of the WTO, the
other two being trade in good s and trade in services.
Before TRIPS, the extent of protection and enforcement of IP rights varied
widely across nations and as intellectual property became more important
in trade, these differences became a source of tension in international
economic re lations. Therefore, it was considered prudent to have new
trade rules for IP rights in order to have more order and predict ability, and
to settle disputes in an orderly manner. The agreement on Trade related
aspects of Intellectual property rights (TRIPs) introduced intellectual
property rules into the WTO multilateral trading system for the first time.
The IPRs are increasingly important part of international trade. They take
a number of forms suchas copyrights, Patent, trademarks, geographical
indication s, industrial design, layout designs. In respect of each of the
main areas of intellectual property covered by the TRIPS Agreement, the
Agreement sets out the minimum standards of protection to be provided
by each Member. Developed countries are mostly the owners of
intellectual property while they are used byboth developed and developing
countries. The TRIPs agreement provides norms andstandards for
implementation of IPR rules. Under TRIPs agreement, every country is
requiredto build adequate procedures an d remedies into its domestic laws
to ensure the effectiveenforcement of IPRs. Disputes over the TRIPs
agreement are to be governed under the WTOdispute settlement
procedures. Under the WTO agreement, developed countries were given
1year to ensure complianc e with TRIPs agreement from 1st January 1995.
Developingcountries were given 5years until 2000. LDCs has been given
11 years untill2006 which hasextended to 2016 for pharmaceutical patents.
Impact on developing countries:
1. It may result in increase in price s on products like pharmaceutical and
chemicals.
2. It will have a favourable effect on the supply of innovations.
3. Developing countries can become the producers of new technologies.
4. The TRIPs agreement could help in transfer of Research and
Development fro m developed to developing countries.
7.3.2 The trade related investment measures (TRIMs)
TRIMs believe that there is a strong connection between trade and
investment. The goal of trade -related investments measures is to give fair
treatment to all investin g members across the world. As the TRIMs deal munotes.in
Page 92
International Economics
92 says, members have to inform the World Trade Organization (WTO)
council to buy and sell various services and goods of their current TRIMs
that are incompatible with the agreement.
The trade related investment m easures prohibits investment measures
which are inconsistent with national treatment or prohibition of
quantitative restrictions. Other measures such as local equity requirement,
participation of local employees in the foreign firms, remittance
restriction s on the profits of foreign firms, foreign exchange restrictions ,
technology transfer requirements etc are considered as deterrent from the
investment point of view.
Main Features of TRIMs
It only applies to investment measures related to goods trade.
This doesn’t apply to service trade.
It doesn’t regulate the entry of foreign industry or investment.
It is about the discriminatory treatment of imported/ exported
products.
Concern measures were applied to both foreign domestic firms.
A transition period of 2 years in the case of developed countries, 5
years in the case of developing countries and 7 years in the case of
LDCs, from the date this agreement came into effect, which is 1st
January 1995.
The main obligation contained in this agreement is that memb ers shall not
apply any trade -related investment measure that is inconsistent with
national treatment or general elimination of quantitative restrictions. The
developing countries are permitted to deviate from the complying the
TRIMsagreement temporarily due to BOP problemsOn request, the
council for trade in Goods may extend the transition period from
theelimination of TRIMs for developing countries including least
developed countries.
7.3.3 The general agreement on Trade in services (GATs)
While service s currently account for over two -thirds of global production
and employment, they represent no more than 25 per cent of total trade.
Furthermore, even though services are increasingly traded in their own
right, they also serve as crucial inputs into the pr oduction of goods and,
consequently, when assessed in value -added terms, services account for
about 50 per cent of world trade. The creation of the GATS was one of
the landmark achievements of the Uruguay Round, whose results entered
into force in January 1995. The GATS was inspired by essentially the
objectives of creating a credible and reliable system of international trade
rules; ensuring fair and equitable treatment of all participants (principle of
non-discrimination); stimulating economic activity t hrough guaranteed
policy bindings; and promoting trade and development through
progressive liberalization. munotes.in
Page 93
Trends in World Trade
and WTO
93 The GATs is based on two requirements. The first is non -discrimination
and second is transparency. GATs provide a set of multilateral rules which
should govern trade in services under condition of transparency and
progressive liberalization. GATs cover all the service sector. It includes an
obligation to provide national treatment and market access to service
providers of other members. The GATS promot es increasing participation
of developing countries in world trade in services. The developing
countries are given flexibility to pursue their own developmental priorities
and to decide which sector to liberalize in further negotiation. Developing
countrie s have started reforming their service sector in order to take
advantage of opportunities created by GATs. This will benefit these
countries and help in the growth of developing countries.
7.4 IMPACT OF WTO ON DEVELOPING COUNTRIES
LIKE INDIA
Benefits ( Advantages)
1) Benefit from increased international trade : According to World
Bank, the merchandise trade for countries like India will increase. The
increase in trade will be due to increase in items like clothing,
agricultural products, food products. In ma ny of these products, India
has an advantage as India has the potential to produce and export these
products in the international market. India will benefit from increased
export of textiles and clothing items.
2) Reviewing policies : The establishment of WTO strengthened the
mechanism for reviewing policies, implementing rules and settling
dispute among trading partners. These steps will help countries to break
barriers and enter international markets for exports.
3) Tariff reduction : There will be substantial tariff reduction in industrial
goods which will benefit countries like India. Developing countries will
get access to the markets of the developed countries .
4) GATs agreement : GATs lays down the framework to define
multilateral rights and obl igation in t he area of services. GATS is the
first step in defining rights and obligation in trade in services. This will
benefit countries like India.
5) TRIPs and TRIMs : The agreement on TRIPs and TRIMs has helped
in curbing the use of non -tariff barriers and strengt hened the rules
relating to anti -dumping, countervailing measures and the use of
safeguard measures.These will be favourable for countries like India.
Disadvantages
1) TRIMs : For developing countries like India, the provisions of TRIMs
agreement is against t he strategy of self -reliant growth. Removal of
restriction on foreign investment can result in MNCs trying to control
important industries in developing countries. The domestic industries
may suffer as a consequence of TRIMs agreement. munotes.in
Page 94
International Economics
94
2) TRIPs : The TRIPs ag reement may not benefit the developing countries
as it would lead to increase in the prices of pharmaceutical products if
the TRIPs agreement is implemented in full. Thus the protection of
intellectual property rights with the help of patents, copyrights,
trademarks will be helpful to the developed countries. Patenting of new
plant varieties will lead to transfer of gains to the MNCs.
3) GATs : GATs gives importance to the liberalization of only those
services such as financial, shipping, transport and communi cation,
health. In those areas, the developing countries have to face unequal
competition from the developed countries.
4) Inequality in the structure of WTO : The arguments decided under
WTO rules favour the rich developed countries. The developing
countries have to accept them. This is unfair since the burden of
adjustments have to be borne by the developing countries. The Dispute
settlement mechanism favours the rich countries which is not helpful
for the developing countries.
7.5 SUMMARY
In this module, w e have seen the various measures adopted by countries to
correct the disequilibrium in the Balance of Payment. It includes using
contractionary monetary and fiscal policies to reduce deficit in balance of
payment. Countries adopt expenditure switching poli cies like Devaluation
to correct deficit in BOP. Other measures include tariffs, quotas, export
promotion methods, import substitution and exchange control. The World
Trade Organization (WTO ) is an inter governmental organization that
regulates and facilit ates international trade. Governments use the
organization to establish, revise, and enforce the rules that govern
international trade. It officially commenced operations on 1 January 1995,
thus replacing the General Agreement on Tariffs and Trade (GATT) t hat
had been established in 1948. The WTO is the world's largest international
economic organization, with 164 member states representing over 98% of
global trade and global GDP. It is based on the Principle of Non
discrimination and progressive liberaliz ation. The TRIPs Agreement sets
out the minimum standards of protection to be provided for safe guarding
intellectual property rights. The goal of trade -related investments
measures is to give fair treatment to all investing members across the
world. GATs cover all the service sector. It includes an obligation to
provide national treatment and market access to service providers of other
members. The WTO agreements benefits developing countries like India
through increased global trade and tariff reduction.
munotes.in
Page 95
Trends in World Trade
and WTO
95 7.6 QUESTIONS
1) Explain the monetary measures to correct disequilibrium in Balance
of payment.
2) Discuss the non -monetary measures to correct the disequilibrium in
Balance of payment.
3) Explain the concept of devaluation and depreciation in correcting the
deficit in Balance of payment
4) Discuss the expenditure switching policy to reduce disequilibrium in
balance of payment.
5) What are the important agreements of WTO?
6) Discuss the WTO agreement with respect to TRIPs and TRIMs.
7) Discuss the WTO agreement with resp ect to GATs and TRIMs.
8) Discuss the WTO agreement with respect to TRIPs and GATs.
9) What are the objectives and Principles of WTO.
10) Discuss the WTO agreement with reference to GATs
munotes.in
Page 96
96 Module 4
8
FOREIGN EXCHANGE MARKET
Unit Structure :
8.0 Objectives
8.1 Introduction
8.2 Meaning and functions of foreign exchange market
8.3 Participants or dealers of foreign exchange market
8.4 Causes for fluctuation in foreign exchange rate
8.5 Balance of Payment theory
8.6 Purchasing power parity theory
8.7 Summary
8.8 Questions
8.0 OBJECTIVES
To understand the need, role of foreign exchange market.
To know the participants and their role in foreign exchange market.
To understand th e Balance of payment theory and purchasing power
parity theory related to exchange rates determination.
8.1 INTRODUCTION
Today in an open economy, every nation is involved in multilateral trade.
In previous days there was barter system so no question felt of currencies
and their power of purchasing each others units. But today every nation
has its own currency to be used within the territory of that nation. Outside
the boundaries it does neither have legal tender nor acceptability. So, to
carry the functio ns of export and import smoothly it is essential to have
arrangement for exchanging these currencies through the system and so
that transfer becomes possible. This problem of exchange is solved by the
foreign exchange market. In this chapter we are going t o learn about the
foreign exchange market and its related aspects.
munotes.in
Page 97
Foreign Exchange Market
97 8.2 MEANING AND FUNCTION OF FOREIGN
EXCHANGE MARKET
Foreign exchange refers to foreign currencies possessed by a country for
making payments to other countries. It includes all claims up on foreign
currencies. It is a mechanism to the international payments through which
payments are made between two counties having different currency
systems. This mechanism converts domestic currencies to foreign
currencies. It is the international paymen t mechanism. Foreign exchange
includes foreign currency, foreign cheques, and foreign drafts.
Foreign exchange market is the place where currencies are bought and
sold. Institutions like the Treasury, Central Bank, Foreign exchange banks
etc. involved in t he purchase and sale of foreign exchange currencies
constitute the foreign exchange market. The transactions in the foreign
exchange market viz. buying and selling foreign currency take at a rate,
which is called ‘Exchange rate’. This market is not any ph ysical place
but a network of communication system connecting the whole complex of
institutions including banks, specialized foreign exchange dealers and
official government agencies through which the currency of one country
can be exchanged for that of an other (converted into another).
8.2.1 Functions :
1. Clearing Function:
It is the primary function of the foreign exchange market. The foreign
exchange market helps to transfer the purchasing power between
countries. This transfer is done by converting do mestic currency into
foreign currencies and vice -versa. It helps to carry out international
payments and transactions. It is also known as money changing function
of a foreign exchange market. It helps in transferring purchasing power
between two countries . This function plays an important role in promoting
international trade along with international capital flow.
2. Credit Function:
The foreign exchange market provides national and international credit to
promote foreign trade. International payments may be delayed as exporters
and importers may not be able to fulfill their obligations immediately.
Bills are discounted for this purpose. Credit function has been the main
drive behind the success of foreign trade. While importing goods time is
required for t he actual delivery of the goods because of shipment and
transportation of goods. So the credit in the foreign exchange market.
3. Hedging Function:
Hedging means covering foreign exchange risks arising out of fluctuations
in exchange rates. An importer w ho has to make payments to a foreign
country may lose if he expects the price to rise in future. To cover the risk,
he may deposit his own funds in the foreign country or buy forward the
foreign exchange. It leads to spot markets and forward markets. Hedgi ng munotes.in
Page 98
International Economics
98 will give rise to a supply of and demand for forward exchange. It is
important, especially in a market with flexible exchange rates, as it
permits exporters and importers to protect themselves against risks
connected with exchange rate fluctuations. It is needed for carrying pure
trading functions.
Check your progress :
1. What is hedging?
8.3 INTRODUCTION AND CONCEPT OF FOREIGN
EXCHANGE RATE
Domestic trade involves no question of foreign exchange and hence no
question of foreign exchange rate because trade remains within the
geographical/political boundary of a country and the trade is facilitated
through the medium of national currency only. Unlike the domestic
trade the international trade involves the participation of two or
more than two countries and h ence two or more than two currencies
come to the forefront. Therefore, there arises the problem of foreign
exchange rate.
8.3.1 CONCEPT
The foreign exchange rate is defined as the rate at which the currencies
of two countries get exchanged against each oth er. It is the price of one
country ‘ s currency in terms of another country‘s currency. For example
in U. S. A. Dollar is the domestic currency while in India Rupee is the
domestic currency. When international trade takes place between these
two countries i t leads to payments and receipts. So as to facilitate
payments and receipts between these two countries we have to correct
one country‘s currency in terms of another country‘s currency which is
effected through the medium of foreign exchange rate. If 1 $ = Rs. 45.
This foreign exchange rate gets established then it expresses the price
of one U.S. dollar in terms of Indian Rupees. i.e. one U.S. Dollar is
equal to 45 Indian Rupees.
8.3.2 DETERMINATION OF FOREIGN EXCHANGE RATE:
As per the balance of payments theory there are twin market fares which
determine the foreign exchange rate in the foreign exchange market.
Algebraically.
F. E. R. = f (Df, Sf)
F. E. R. stands for Foreign Exchange Rate. f stands for functional
relationship.
Df stands for Demand for forei gn exchange Sf stands for Supply of foreign
exchange.
munotes.in
Page 99
Foreign Exchange Market
99 Demand for foreign exchange: -
Foreign exchange is demanded by the residents of the country for the
following reasons: -
1) Imports of goods: - It is one of the major reasons for the demand for
foreign exch ange. Raw materials and semi -finished goods are imported
by the residents of the reporting country so as to undertake production
of finished goods. It also imports consumer durables, so as to facilitate
the consumption of sophisticated, qualitative goods. Capital goods like
machinery, spare parts etc. are imported so as to industrialize the
economy. All these types of imports require the demand for foreign
exchange.
2) Import of services: - Services belong to the tertiary sector. Residents of
the country demand two types of services viz. a) the services rendered
by the individual professionals like traders, lowers, doctors, musicians,
dancers, etc. b) The other types services are also demanded which get
referred to as institutional services viz. banking, educati onal services,
insurance, transportation, communication, tourism etc. For importing of
services of these types foreign exchange gets demanded.
3) Unilateral Payments: - In order to make unilateral payments i.e. one
sided payments viz. donations, gifts etc one has to demand foreign
exchange.
4) Miscellaneous: - The miscellaneous items constitute repayment of
foreign debt, purchase of assets in foreign countries, direct foreign
investment etc. All these miscellaneous items also require the demand
for foreign exchange .
FER
$ 2 = ₤ 1
$ 1.5 = ₤ 1
D f (D ₤)
O ₤ ₤ X
D f (D ₤)
Figure 8.1
The demand for foreign exchange curve is a downward sloping curve
which slopes downward from left to right indicating an inverse
relationship between the rate of exchange and the demand for foreign
exchange. There are two countries viz. USA and England. In the
diagram USA‘s demand for England‘s pound sterling is shown. munotes.in
Page 100
International Economics
100 When the foreign exchange rate is $2 = ₤1 USA demands ₤ 1000 from
England. As the foreign exchange rate falls to $1.5 = ₤ 1 USA‘s
demand for England‘s pound sterling rises to ₤1500.
Supply of foreign exchange: -
The supply of foreign exchange comes out of receipts d ue to excess of
exports over imports. The following are the main sources of supply of
foreign exchange: -
1) Exports of goods: - It is the main source of receipt and hence the
supply of foreign exchange. It depends upon the size and the price of
exports. If the size of exports is large price of the exports remaining
the same the receipts will be more. The size of the exports remaining
the same if the price of exports rises then the receipts will be more. It
also depends upon the elasticity of exports.
2) Export of services: - Export services include both the types of
services viz. the individual professional services and the institutional
services. The export of all these types of services earn foreign
exchange.
3) Unilateral or one sided receipts: - These include donati on, gifts,
grants etc. This is a sort of an earning of foreign exchange due to
which the supply of foreign exchange increases.
4) Miscellaneous: - The miscellaneous items which are the source of
earning of foreign exchange include direct foreign investment,
portfolio investment, repayment of debt etc which form the source of
supply of foreign exchange.
FER
S f (S ₤)
$ 2 = ₤1
$ 1.5 = ₤1
O X
₤ ₤
S f (S ₤)
Figure 8.2
The supply of foreign exchange curve is a upward sloping curve which
slops upward from left to right. It indicates a positive and direct
relationship between rate of exchange and the supply of foreign exchange.
When the rate of exchange was $1.5 = £ 1 England used to supply £ 1000.
When the rate of exchange shoots up from $1.5 = £ 1 to $2 = £ 1 her
supply of foreign exchange shoots up from £1000 to £2000.
munotes.in
Page 101
Foreign Exchange Market
101 The intersection between the demand for foreign exchange curve and the
supply of foreign exchange curve determine the equilibrium foreign
exchange rate.
FER
$ 2 = ₤1
$ 2 = ₤ 1
$ 1.5 = ₤ 1
O Q X
Df & Sf
Figure 8.3
Along X axis demand for foreign exchange and supply of foreign
exchange are mark ed while along Y axis foreign exchange rate is marked.
Df is a demand for foreign exchange curve which slopes downward from
left to right indicating an inverse relationship between the foreign
exchange rate and the demand for foreign exchange i.e. at a higher rate
of exchange less foreign exchange will be demanded conversely at a lower
foreign exchange rate more foreign exchange will be demanded. Sf is the
supply of foreign exchange curve which slops upward from left to right
establishing a positive and dir ect relationship between the foreign
exchange rate and the supply of foreign exchange. Higher is the foreign
exchange rate more foreign exchange will be supplied conversely lower is
the foreign exchange rate less foreign exchange will be supplied. Both the
demand for foreign exchange curve and the supply of foreign exchange
curve intersect at the point ‘E’ where foreign exchange rate gets
determined. If we take a perpendicular line from point E along Y axis, we
get point ‘R’ hence OR will be the equilibrium foreign exchange rate.
Supposing if the foreign exchange rate shoots up from OR to OR1 then
supply of foreign exchange exceeds the demand for foreign exchange due
to which the foreign exchange rate will fall from OR1 to OR. Supposing if
the foreign exchan ge rate slows down from OR to OR 2 then the demand
for foreign exchange will exceed the supply of foreign exchange by cd
amount. Hence there will an upward tendency of foreign the exchange rate
i.e. the foreign exchange rate will shoot up from OR 2 to OR. In this way
once again the equilibrium foreign exchange rate will be maintained.
The merit of the balance of payments theory of foreign exchange rate is
that it has brought the phenomenon of foreign exchange rate under the
preview of general equilibrium theory.
The defect of the balance of payments theory of foreign exchange rate lies
in the fact that it assumes perfect competition. Nowhere in the world
perfect competition exists. It is the imperfect competition or monopolistic
competition which exists everyw here. Secondly it is also assumed that Sf > Df Sf a E b d Df > Sf Df c munotes.in
Page 102
International Economics
102 foreign exchange rate is a function of balance of payments. But there are
other forces which influence the foreign exchange rate.
Check Your Progress:
1. Define Foreign exchange rate.
8.4 PARTICIPANTS / DEALERS OF FOREIG N
EXCHANGE MARKET
1. Commercial banks :
They carry out buying and selling orders from their clients and of their
accounts. They deal with other commercial banks and through foreign
exchange brokers. Their role is important in the success of these markets .
2. Retail clients :
These include people, international investors, multinational corporations,
and others who need foreign exchange. They deal through commercial
banks and authorized agents. They are large in numbers.
3. Brokers :
They are the authorize d brokers acting as intermediaries between buyers
and sellers, mainly the banks. Their role is major in the success and spread
of foreign exchange market.
4. Central banks :
Under the flexible exchange rate the central bank of the nation normally
does not interfere in the exchange market. But now they are interfering in
the same to influence the rates in order to keep economy unaffected by the
trade.
Check your progress :
1. What is foreign exchange market?
2. Who participate in foreign exchange market to activate it?
8.5 CAUSES FOR THE FLUCTUATIONS IN
EXCHANGE RATES
1. Trade Movements:
Changes in imports and exports will cause a change in the rate of
exchange. If import exceeds exports, the demand for foreign currency rises
and rate of exchange will be unfavorable to the country favourable balance
of payments will raise the exchange value of the currency and vice - versa.
munotes.in
Page 103
Foreign Exchange Market
103 2. Price Trends:
Prices trends in the domestic economy may bring abut fluctuations in
exchange rate e.g. inflation will result in ris ing prices causing falling
exports. Therefore, changes in price within the nation brings effect on the
exchange rates too. Because price fluctuations directly affects the
purchasing power of the consumers for goods and services.
3. Capital Movements:
Expor t and import of capital will bring about fluctuations in the rate of
exchange. The import of capital will result in increased demand for the
currency of that country in the foreign exchange market and the exchange
value of that currency will rise and vice -versa.
4. Banking operations:
Bank are the major dealers of foreign exchange, the operations of the bank
regarding the changes in the bank rate, transfer of funds, accepting foreign
bills of exchange, arbitrage etc. affect the demand and hence influence th e
exchange rates.
5. Political conditions:
Political stability will invite foreign capital and the rate of exchange will
move favorably to the country. Political instability will cause a flight of
capital resulting in an unfavorable exchange rate for the c ounty.
6. Monetary policy:
An expansionary or contractionary monetary policy may result in inflation
or deflation bringing about changes in the internal and external value of
money. Tariff policy may also bring about fluctuations in exchange rate.
Check Yo ur Progress :
1. Why do exchange rate fluctuate ?
8.6 BALANCE OF PAYMENT THEORY
BOP theory, is also known as the Demand and Supply theory and the
General Equilibrium theory of exchange rate, holds that the foreign
exchange rate, under free market conditio ns, is determined by the
conditions of demand and supply in the foreign exchange market. Free
mechanism of trade is applied here. Thus, according to this theory, the
price of a currency (exchange rate) is determined just like the price of any
commodity is determined by tree play of the forces of demand and supply.
The value of a currency appreciates when the demand for it increases and
depreciates when the demand fall, in relation to its supply in the foreign
exchange market. The extent of the demand for a nd supply of a nation’s
currency in the foreign exchange market depends on its BOP position.
When the BOP is in equilibrium, the supply of and demand for the munotes.in
Page 104
International Economics
104 currency are equal. But when there is deficit in the BOP, supply of the
currency exceeds its deman d and causes a fall in the external value of the
currency; when there is surplus, demand exceeds supply and causes a rise
in the external value of the currency.
8.6.1 Merits of BOP Theory :
It treats the problem of the determination of rate of exchange as an
integral part of the general equilibrium theory.
It is in line with the general theory of value.
This theory explains that any disequilibrium in the balance of
payments of a country can be corrected through making appropriate
adjustment in the rate of foreign exchange by the way of devaluation.
It shades lights on various factors affecting the exchange rate system.
It focuses on demand and supply and facilitates equilibrium analysis.
8.6.2 Evaluation :
The BOP theory provides a fairly satisfactory expla nation of the
determination of the rate of exchange. This theory has the following
advantages;
Unlike the PPP theory, BOP theory recognizes the importance of all
the items in the BOP, in determining the exchange rate.
This demand and supply theory in confo rmity with the general theory
of value -like the price of any commodity in a free market, the rate of
exchange is determined by the forces of demand and supply.
It also indicates that BOP disequilibrium can be corrected by
adjustments in the exchange Rate b y devaluing or revaluing currency
value.
This theory brings the determination of the rate of exchange within the
purview of the General Equilibrium Theory. That is why this theory is
also called the general equilibrium theory of exchange rate
determination .
Haberler says that its greatest weakness is that it assumes balance of
payments to be fixed quantity.
Check your progress :
1. How exchange rate is determined according to BOP theory?
8.7 PURCHASING POWER PARITY (PPP) THEORY
This theory has been resta ted by the Swedish economist Gustav Cassel in
1916, exactly in the years following the First World War, when the
exchange rates are free to fluctuate, the rate of exchange between two
currencies in the long run will be determined by their respective
purcha sing powers. According to him “the rate of exchange between two munotes.in
Page 105
Foreign Exchange Market
105 currencies must stand essentially on the quotient of the internal purchasing
powers of these currencies.”
Thus, according to the purchasing power parity theory, the exchange rate
between one c urrency and another is in equilibrium when their domestic
purchasing powers at the rate of exchange are equivalent. E.g. if in India
40 Rs are spent for purchasing 1 kg of apples and in America for the same
kg of apples if one dollar is needed to spend, th en it is clear that the
purchasing power of both currencies is different in their respective
nations. In order to make equivalent these currencies with each others
units purchasing power will be 1$ = 40Rs.
Once the equilibrium is established, the market fo rces will operate to
restore the equilibrium if there are some deviations. E.g. if the exchange
rate changes to 1$ = 42Rs when the purchasing power of these currencies
remain stable, dollar holder will convert dollars into rupees because, by
doing so, they save Rs. 2 when they purchase a commodity worth $ 1. A
change in the purchasing power of currencies will be reflected in their
exchange rates. For this purpose the price index is made. It is the parity
(equality of the purchasing powers of the currencies which determines the
exchange rate.
If there is a change in prices (purchasing power of the currencies), the new
equilibrium rate of exchange can be found out by the following formula;
ER = Er x Pd/Pf
Where,
ER = Equilibrium exchange rate
Er =Exchange rate in the reference period
Pd = Domestic price index
Pf = Foreign country’s price index
8.7.1 Two versions of PPP:
1. Absolute Version:
Under this version, the exchange rate between the currencies of two
nations is established at the point where their pu rchasing power is equal. It
reflects their domestic purchasing power too. It is calculated as
Rate of exchange = PI / PA
Where,
PI = Prices of certain goods in India
PA = Prices of same goods in another country, say USA.
Thing to note is that, the chang es in internal price level cause changes in
the exchange rate. if inflation is India, then the purchasing power of rupee munotes.in
Page 106
International Economics
106 in terms of dollars would decline. It is not easy to measure the value of
money in absolute terms.
2. Relative Version :
In this method the changes in the purchasing power can be measured by
the changes in the indices of domestic prices of the countries concerned.
Hence the changes in the equilibrium rate can be measured by the ration of
the price indices of the respective countries. In t his new equilibrium rate
of exchange can be calculated by multiplying the base period of rate
exchange by the relative changes in the price levels in the two countries
with the help of index numbers.
8.7.2 Evaluation of PPP Theory :
It is based on the unr ealistic assumption that international trade is free
from all barriers.
This theory does not explain the demand for supply of foreign
exchange. While in the free economy the rate is determined by the
forces of demand and supply of foreign exchange.
The qua lity of goods and services may vary from country to country,
so comparison of prices without regard to the quality is unrealistic.
Cost of transport is ignored in this theory.
It also ignores the impact of international capital movement which
affects on th e foreign exchange market.
The price index number includes the price of all commodities and
services, including those which are not internationally traded and
hence the rate of exchange calculated on the basis of these price
indices cannot be realistic.
It does not consider the significance of the elasticity’s of reciprocal
demand.
This theory is good in long run and lacks its significance in short run.
Check your progress:
1. What is PPP theory?
8.8 SUMMARY
1. Foreign exchange refers to foreign currenci es possessed by a country
for making payments to other countries. It includes foreign currency,
foreign cheques and foreign drafts.
2. Foreign exchange market performs Clearing function, Credit function
and Hedging function. munotes.in
Page 107
Foreign Exchange Market
107 3. Commercial banks, retail clients, brokers and central banks are the
participants or dealers of the foreign exchange market.
4. BOP theory is also known as the demand and supply theory holds that
foreign exchange rate, under free market conditions, is determined by
the conditions of demand and supply in the foreign exchange market.
5. According to the Purchasing Power Parity theory, the exchange rate
between one currency and another is in equilibrium when their
domestic purchasing powers at the rate of exchange are equivalent.
6. Under Absolute version of PPP theory, the exchange rate between the
currencies of two nations is established at the point where their
purchasing power is equal.
7. In the Relative version of PPP theory the changes in the purchasing
power can be measured by the changes in the indices of domestic
prices of the countries concerned.
8.9 QUESTIONS
1. What is Foreign Exchange rate? What are its functions?
2. Who are the participants in foreign exchange market ?
3. Explain how demand for and supply of foreign exchange determine the
foreign exchange rate.
4. Explain BOP theory of Exchange rate.
5. Explain PPP theory of Exchange rate.
munotes.in
Page 108
108 9
EXCHANGE RATE RISKS AND RISK
MANAGEMENT
Unit Structure :
9.0 Objectives
9.1 Introduction
9.2 Spot and Forward Exchange rate
9.3 Exchange risks and its types
9.4 Exchange risk management
9.5 Role of Central Bank in foreign exchange rate manag ement
9.6 Managed flexible exchange rate system of India
9.7 Summary
9.8 Questions
9.0 OBJECTIVES
To understand spot and forward exchange rate
To get an idea of various exchange risks faced in forex market
To understand the measures to guard again st foreign risks(Risk
Management)
To know about the role of central Bank in foreign exchange rate
management
To understand the managed flexible exchange rate system of India
9.1 INTRODUCTION
In last unit we learnt about the nature and functions of foreig n exchange
market and its significance in the development of international trade. In
this unit we have to focus on the various risks faced in this market due to
change in exchange rates. International trade is sensitive in nature and
hence is affected by v arious factors including domestic or foreign
environment. Therefore chances of affecting trade are always high. It also
brings impact on exchange rates. It may affect exporter or importer
negatively. So risks must be known and those must be managed for the
successfulness of foreign trade. This unit focuses more on such risks and
their management. munotes.in
Page 109
Exchange Rate Risks
and Risk Management
109 9.2 SPOT AND FORWARD EXCHANGES
The term spot exchange refers to the class of foreign exchange transaction
which requires the immediate delivery, or exchange of c urrencies on the
spot. In practice, the settlement takes place within two days in most
markets. The rate of exchange effective for the spot transaction is known
as the spot rate and the market for such transactions is known as the spot
market. It is day to day rate of exchange which is charged on the delivery
of goods on spot.
The forward transaction is an agreement between two parties, requiring
the delivery at some specified future date of a specified amount foreign
currency by one of the parties, against payment of domestic currency by
the other party, at the price agreed upon in the contract. The rate of
exchange applicable to the forward contract is called the forward exchange
rate and the market for forward transactions is knows as the forward
market.
The foreign exchange regulations of various countries, generally, regulate
the forward exchange transactions with a view to curb speculation in the
foreign exchange market. In India, for example, commercial banks are
permitted to offer forward cover only w ith respect to genuine exports and
import transactions.
Forward exchange facilities, obviously, are of immense help to exporters
and importers as they can cover the risks arising out of exchange rate
fluctuations by entering into an appropriate forward exc hange contract.
9.2.1 Forward exchange rate :
This rate may be at par, premium or discount.
A) At par :
If the FER quoted is exactly equivalent to the spot rate at the time of
making the contract, the forward exchange rate is said to be at par.
B) At premium :
The FER for a currency, say a dollar, is said to be at a premium with
respect to the spot rate when one dollar buys more units of another
currency, say rupee, in the forward that in the spot market. The premium is
usually expressed as a percentage deviation from the spot rate on a par
annum basis.
C) At discount :
The FER is determined mostly by the demand for and supply of forward
exchange. Naturally, when the demand for forward exchange exceeds its
supply, the forward rate will be quoted at premium and, conve rsely , when
the supply of forward exchange exceeds the demand for it, the rate will be
quoted at discount. When the supply is equivalent to the demand for
forward exchange, the forward rate will tend to be a par. munotes.in
Page 110
International Economics
110 Check your progress
1. What is the differ ence between Spot and Forward exchange risk?
9.3 EXCHANGE RATE RISK
One of the important problems a firm with international business may
encounter is the currency exchange rate risk. Exchange risk is the
probability that a company will be unable to adjus t prices and costs to
offset changes in the exchange rate.
Fluctuation in exchange risk may cause a loss or profit to a firm. Therefore
the risk always prevail in exchange market with subject to often
fluctuation in the exchange risk caused due to any fact ors. There are two
sorts of forei gn exchange risks or exposures. The term economic exposure
refers to the risks arising from economic factors through economic
transactions and other economic activities.
Economic exposure may be divided into two parts.
Transaction exposure :
It arises out of the various types of transactions such as international
traded, borrowing and lending in foreign currencies, and the local
purchasing and sales activities of foreign subsidiaries that require
settlement in a foreign cu rrency.
Operating exposure :
It arises because currency fluctuation can alter a company’s future
revenues and costs - that is its operating cash flows. It needs to have
long term perspective, considering the firm as an ongoing concern
with operations whos e cost and price competitiveness could be
affected by exchange rate changes.
Accounting exposure (Translation Exposure) :
It arises from the need, for purpose of reporting and consolidation, to
convert the financial statements of foreign operations from the local
currencies involved to the home currency. According to change in
currency value, foreign exchange translation gains or losses may
result. The rules that govern translation are devised by an accounting
associated such as the Financial Accounting S tandards Board ( FASB )
in the United States.
Check your progress
1. Find out the difference between Transaction, Operating and
Accounting Exposures (Risks ).
munotes.in
Page 111
Exchange Rate Risks
and Risk Management
111 9.4 FOREIGN RISK MANAGEMENT
A firm need to have strategies for managing currency exchange ra te risk.
It can be done by many ways as:
CURRENCY SWAPS :
A currency swap refers to a spot sale of a currency combined with a
forward repurchase of the same currency as part of single transaction. For
example, suppose that Citibank receives as $1 million p ayment today that
its will need in three months, but in the meantime it wants to invest this
sum in British pounds, Citibank would incur lower brokerage fees by
swapping the $1 million into British pounds with London Barclays Bank
as part of a single trans action or deal instead of selling dollars for pounds
in the spot market today and at the same time repurchasing dollars for
pounds in the forward market for delivery in three months -in two separate
transactions. The Swap rate (It is usually expressed on a yearly basis) is
the difference between the spot and forward rates in the currency swap.
Most interbank trading involving the purchase or sale of currencies for
future delivery is done not by forward exchange contracts alone but
combined with spot transact ions in the form of currency swaps. There
were about $1.8 trillion worth of currency swap outsta nding at the end of
1998. Today , about 40% of inter -bank currency trading consists of sport
trans actions. 10% are forward contracts, and 50% take the form of
currency swaps. Thus, the foreign exchange market is dominated by the
swap and spot markets.
Example :
A swap contract can be entered in two or more currencies, involving two
or more parties. More often than not, banks are intermediaries between
twp parties to the swap. A MNC, say Suzuki has borrowed in Japanese
yen at a fixed rate. It wants dollars for its operations in India. It can swap
its exchange risk by entering into a contract for giving dollars at a floating
rate or fixed rate, for yen, it has got at affixed rate. If it wants both
exchange risk hedge and interest rate hedge, Suzuki might surrender its
yen loan at a loan at a floating rate to a dollar loan at a fixed rate.
Currency swap is a contract or agreement and is not a loan by itself.
Economic a dvantage :
Swaps provide real economic advantages to both the parties to the swap.
Otherwise, swap will not take place. Currency swaps saves in costs,
promote liquidity and depth in the markets and or provide a hedge to the
risk that the parity is exposed to. Currency swaps are used to help
financing the long-term requirements of funds for projects of MNC’s. In
many foreign courtiers, long term capital forward foreign exchange
markets are absent and not well developed. In this scenario swaps are
useful as s pecial purpose vehicles and not well developed. In this scenario
swaps are useful as special purpose vehicles for meeting the financial
needs of MNC’s and for providing liquidity to thee markets. munotes.in
Page 112
International Economics
112 Exchange Risk Avoidance :
It is the elimination of exchange risk by doing business locally. The
adverse effects of devaluation (reduction in the value of the home
currency) can be mitigated by procuring the item domestically if
devaluation has made domestic good cheaper than foreign. Devaluation
always encourages i mport substitution.
Currency diversification :
It is spreading financial assets across several or more currencies so that
exchange rate movements of different currencies may be evened out.
Diversify sourcing :
It is another strategy to change the source o f purchasing. For example if
US goods become costlier because of dollar appreciation, change the
source of purchase from the US to countries where the product is cheaper,
either because of depreciation of their currencies or other reasons.
Hedging :
Hedgi ng means covering foreign exchange risks arising out of fluctuations
in exchange rate. An importer who has to make payments to a foreign
country may lose if he expects the price to rise in future. To cover the risk,
he may deposit his own funds in the fore ign country or buy forward the
foreign exchange. It leads to spot markets and forward markets. Hedging
will give rise to a supply of and demand for forward exchange. It is
important, especially in a market with flexible exchange rates, as it
permits export ers and importers to protect themselves against risks
connected with exchange rate fluctuations. It is needed for carrying pure
trading functions.
Future rate agreement :
It an agreement between two parties, requiring the delivery at some
specified future date of a specified amount of foreign currency by one of
the parties, against payment in domestic currency by the party, at the price
agreed upon in the contract. This agreed rate is known as forward
exchange rate. It is useful for importer and exporter fo r covering risks
arising out of rate fluctuation.
Future :
It is similar to forward exchange rate, but actually it has standardized
features - the contract size and maturity dates are standardized. Futures can
be traded only on an organized exchange and th ey are traded
competitively. While the forward contracts are customized.
Options :
It combines advantages of futures and spot. An option is a contract or
financial instrument that gives holder the right, but not the obligation, to
sell or buy a given quant ity of an asset at a specified price at a specified munotes.in
Page 113
Exchange Rate Risks
and Risk Management
113 future date. An option to buy the underlying asset is known as a call
option, and an option to sell the underlying asset is known as pull option.
Check the progress :
1. What is Hedging?
2. What is Currency Swa p?
3. What is difference between Forward exchange rate and Future options?
9.5 ROLE OF CENTRAL BANK IN FOREIGN
EXCHANGE RATE MANAGEMENT
Central banks, as the monetary authority of a country’s economy, are
responsible for regulating and monitoring the banking system in the
country. Being the “lender of last resort” central banks are responsible for
maintaining sufficient reserves and formulate monetary policy in such a
manner so as to ensure commercial banks that there will not be a supply
shortage of money to avoid financial crisis. Central banks, also plays an
important role in the forex market. Open market operations and interest
rate policies of central banks influence currency rate s to a very large
extent.
Central bank performs following main functions in foreign exchange
market:
1) To Regulate the market: The Central Bank do not directly control or
influence the foreign exchange market. The Central Bank influences
inflation and exch ange rate by increasing or decreasing the interest
rate in the country through its monetary policy.
2) To Manage foreign exchange reserves: Depending upon the
economic situation in the foreign exchange market, Central Bank buys
or sell foreign currency as a gainst the domestic currency. Central
Bank tries to control the value of domestic currency in the foreign
exchange market to control the over -valuation or under -valuation of
the domestic currency.
3) To control circulation of money supply: In order to contro l the
liquidity of money in the economy Central Bank decides the money
supply in circulation. Because it has a greater impact on the
appreciation and depreciation of domestic currency in the foreign
exchange market.
9.6 MANAGED FLEXIBLE EXCHANGE RATE SYSTE M
OF INDIA
There are three types of exchange rate systems prevailed in the world,
a) Fixed exchange rate system,
b) Flexible or floating exchange rate system
c) Managed flexible or floating exchange rate or Managed flexibility munotes.in
Page 114
International Economics
114 The exchange rate refers to the ar rangement to exchange the different
country’s currencies in the foreign exchange market. In the post
Independence period, India have adopted a par value system which was
fixed against gold in 1947. This par exchange rate system against the
basket of severa l countries currencies continued till 1971. In late 80’s
and 90’s India faced severe balance of payments difficulties. To
encounter these difficulties, a High level Committee on Balance of
Payments was formed under the Chairmanship of C. Rangarajan. With
regard to the exchange rate policy, the committee recommended that
consideration be given to
(i) a realistic exchange rate
(ii) avoiding use of exchange mechanisms for subsidization
(iii) maintaining adequate level reserves to take care of short -term
fluctuations
(iv) conti nuing the process of liberalization on current account
(v) reinforcing effective control over capital transactions
The Committee also recommended to unify the exchange rate, as an
important step towards full convertibility. To move towards the market
determi ned exchange rate, the Liberalised Exchange Rate Management
System (LERMS) was adopted in March 1992 which involves dual
exchange rate system. Then the dual exchange rate system was again
replaced by unified exchange rate system in March 1993.
In this way , India adopted managed flexible exchange rate system in
which exchange rate is determined in the foreign exchange market
through buying and selling of currencies by individuals and the
institutions. But during the time of extreme fluctuations, Reserve Ban k
of India i.e. the Central Bank of India intervenes in the foreign exchange
market so as to avoid any appreciation or depreciation of Indian Rupee
in the foreign exchange market.
9.7 SUMMARY
1. The spot exchange rate is day to day rate of exchange which is charged
on the delivery of goods on spot or settlement takes place within two
days in most markets.
2. The forward transaction is an agreement between two parties, requiring
the delivery at some specified future date of a specified amount of
foreign currency by the other party, at the price agreed upon in the
contract.
3. Exchange risk is the probability that a company will be unable to adjust
prices and costs to offset changes in the exchange rate.
4. Economic exposure may be divided into Transactio n exposure,
Operating exposure, Accounting exposure. munotes.in
Page 115
Exchange Rate Risks
and Risk Management
115 5. A currency swap refers to a spot sale of a currency combined with a
forward repurchase of the same currency as part of single transaction.
6. The foreign exchange market is dominated by the swap and s pot
markets.
7. Currency swaps saves costs, promote liquidity and depth in the markets
and provide a hedge to the risk that parity is exposed to. Currency
swaps used to help financing the long term requirements of funds for
projects of MNCs.
8. Hedging me ans covering foreign exchange risks arising out of
fluctuations in exchange rates.
9. An option is a contract or financial instrument that gives holder the
right, but not the obligation, to sell or buy a given quantity of an asset
at a specified price at a specified future date.
9.8 QUESTIONS
1. Differentiate between Spot and Forward exchange rates?
2. What are the foreign Risks faced in Forex market?
3. How can the risks be managed effectively?
4. Explain the role of Central Bank in foreign exchange ra te management.
5. Explain briefly managed flexible exchange rate system of India.
munotes.in
Page 116
Question Paper Pattern
(Theoretical Courses)
Maximum Marks: 100
Questions to be set: 0 6
Duration: 03 Hrs.
All Questions are Compulsory Carrying 15 Marks each.
Question
No Particular Marks Q-1 Objective Questions A) Sub Questions to be asked 12 and to be answered any 10 B) Sub Questions to be asked 12 and to be answered any 10 (*Multiple choice / True or False / Match the columns/Fill in the blanks) 20 Marks
Q-2
Q-2 Full Length Question OR Full Length Question
15 Marks
15 Marks
Q-3
Q-3 Full Length Question OR Full Length Question
15 Marks
15 Marks
Q-4
Q-4 Full Length Question OR Full Length Question
15 Marks
15 Marks Q-5 Q-5 Full Length Question OR Full Length Question 15 Marks 15 Marks
Q-6
Q-6 A) Theory questions B) Theory questions OR Short Notes To be asked 06 To be answered 04
10 Marks
10 Marks
20 Marks
Note:
Theory question of 15 marks may be divided i nto two sub questions of 7/8 or 10/5 Marks.
Revised Syllabus of Courses of B.Com. Programme at Semester V and VI
with effect from the Academic Year 20 22-2023
munotes.in